mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 03:55:09 +08:00
6ad63dec9c
This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.
Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:
- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for
Rich Graphics Applications".
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
These are actual commercial products we now support with an in-kernel
device tree source file:
- Bosch Guardian is a product made by Bosch Power
Tools GmbH, based on the Texas Instruments AM335x chip
- Winterland IceBoard is a Texas Instruments AM3874 based
machine used in telescopes at the south pole and elsewhere, see commit
d031773169 for some pointers:
- Inspur on5263m5 is an x86 server platform with an Aspeed
ast2500 baseboard management controller. This is for running on
the BMC.
- Zodiac Digital Tapping Unit, apparently a kind of ethernet
switch used in airplanes.
- Phicomm K3 is a WiFi router based on Broadcom bcm47094
- Methode Electronics uDPU FTTdp distribution point unit
- X96 Max, a generic TV box based on Amlogic G12a (S905X2)
- NVIDIA Shield TV (Darcy) based on Tegra210
And then there are several new SBC, evaluation, development or modular
systems that we add:
- Three new Rockchips rk3399 based boards:
- FriendlyElec NanoPC-T4 and NanoPi M4
- Radxa ROCK Pi 4
- Five new i.MX6 family SoM modules and boards for industrial
products:
- Logic PD i.MX6QD SoM and evaluation baseboad
- Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
- Phytec phyCORE i.MX6 UltraLite SoM and evaluation module
- MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
microcontroller
- Chameleon96, an Intel/Altera Cyclone5 based FPGA development
system in 96boards form factor
- Arm Fixed Virtual Platforms(FVP) Base RevC, a purely
virtual platform for corresponding to the latest "fast model"
- Another Raspberry Pi variant: Model 3 A+, supported both
in 32-bit and 64-bit mode.
- Oxalis Evalkit V100 based on NXP Layerscape LS1012a,
in 96Boards enterprise form factor
- Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108
For already supported boards and SoCs, we often add support for new
devices after merging the drivers. This time, the largest changes include
updates for
- STMicroelectronics stm32mp1, which was now formally
launched last week
- Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip
- Action Semi S700
- TI AM654x, their recently merged 64-bit SoC from the OMAP family
- Various Amlogic Meson SoCs
- Mediatek MT2712
- NVIDIA Tegra186 and Tegra210
- The ancient NXP lpc32xx family
- Samsung s5pv210, used in some older mobile phones
Many other chips see smaller updates and bugfixes beyond that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=1goV
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.
Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:
- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
processor:
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
Applications":
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
These are actual commercial products we now support with an in-kernel
device tree source file:
- Bosch Guardian is a product made by Bosch Power Tools GmbH, based
on the Texas Instruments AM335x chip
- Winterland IceBoard is a Texas Instruments AM3874 based machine
used in telescopes at the south pole and elsewhere, see commit
d031773169 for some pointers:
- Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
baseboard management controller. This is for running on the BMC.
- Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
used in airplanes.
- Phicomm K3 is a WiFi router based on Broadcom bcm47094
- Methode Electronics uDPU FTTdp distribution point unit
- X96 Max, a generic TV box based on Amlogic G12a (S905X2)
- NVIDIA Shield TV (Darcy) based on Tegra210
And then there are several new SBC, evaluation, development or modular
systems that we add:
- Three new Rockchips rk3399 based boards:
- FriendlyElec NanoPC-T4 and NanoPi M4
- Radxa ROCK Pi 4
- Five new i.MX6 family SoM modules and boards for industrial
products:
- Logic PD i.MX6QD SoM and evaluation baseboad
- Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
- Phytec phyCORE i.MX6 UltraLite SoM and evaluation module
- MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
microcontroller
- Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
in 96boards form factor
- Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
platform for corresponding to the latest "fast model"
- Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
and 64-bit mode.
- Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
enterprise form factor
- Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108
For already supported boards and SoCs, we often add support for new
devices after merging the drivers. This time, the largest changes
include updates for
- STMicroelectronics stm32mp1, which was now formally launched last
week
- Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip
- Action Semi S700
- TI AM654x, their recently merged 64-bit SoC from the OMAP family
- Various Amlogic Meson SoCs
- Mediatek MT2712
- NVIDIA Tegra186 and Tegra210
- The ancient NXP lpc32xx family
- Samsung s5pv210, used in some older mobile phones
Many other chips see smaller updates and bugfixes beyond that"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
ARM: dts: am335x: switch to use phy-gmii-sel
ARM: dts: am4372: switch to use phy-gmii-sel
ARM: dts: dm814x: switch to use phy-gmii-sel
ARM: dts: dra7: switch to use phy-gmii-sel
arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
ARM: dts: exynos: Add stdout path property to Arndale board
ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
ARM: dts: exynos: Enable ADC on Odroid HC1
arm64: dts: sprd: Remove wildcard compatible string
arm64: dts: sprd: Add SC27XX fuel gauge device
arm64: dts: sprd: Add SC2731 charger device
arm64: dts: sprd: Add ADC calibration support
arm64: dts: sprd: Remove PMIC INTC irq trigger type
arm64: dts: rockchip: Enable tsadc device on rock960
ARM: dts: rockchip: add chosen node on veyron devices
...
702 lines
17 KiB
Plaintext
702 lines
17 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada 38x family of SoCs.
|
|
*
|
|
* Copyright (C) 2014 Marvell
|
|
*
|
|
* Lior Amsalem <alior@marvell.com>
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
model = "Marvell Armada 38x family SoC";
|
|
compatible = "marvell,armada380";
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts-extended = <&mpic 3>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "marvell,armada380-mbus", "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
interrupt-parent = <&gic>;
|
|
pcie-mem-aperture = <0xe0000000 0x8000000>;
|
|
pcie-io-aperture = <0xe8000000 0x100000>;
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
|
|
};
|
|
|
|
devbus_bootcs: devbus-bootcs {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs0: devbus-cs0 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs1: devbus-cs1 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs2: devbus-cs2 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus_cs3: devbus-cs3 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
|
|
|
L2: cache-controller@8000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x8000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
arm,double-linefill-incr = <0>;
|
|
arm,double-linefill-wrap = <0>;
|
|
arm,double-linefill = <0>;
|
|
prefetch-data = <1>;
|
|
};
|
|
|
|
scu@c000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0xc000 0x58>;
|
|
};
|
|
|
|
timer@c200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0xc200 0x20>;
|
|
interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
|
|
clocks = <&coreclk 2>;
|
|
};
|
|
|
|
timer@c600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xc600 0x20>;
|
|
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
|
|
clocks = <&coreclk 2>;
|
|
};
|
|
|
|
gic: interrupt-controller@d000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0xd000 0x1000>,
|
|
<0xc100 0x100>;
|
|
};
|
|
|
|
i2c0: i2c@11000 {
|
|
compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@11100 {
|
|
compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
|
|
reg = <0x11100 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@12000 {
|
|
compatible = "marvell,armada-38x-uart";
|
|
reg = <0x12000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@12100 {
|
|
compatible = "marvell,armada-38x-uart";
|
|
reg = <0x12100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pinctrl@18000 {
|
|
reg = <0x18000 0x20>;
|
|
|
|
ge0_rgmii_pins: ge-rgmii-pins-0 {
|
|
marvell,pins = "mpp6", "mpp7", "mpp8",
|
|
"mpp9", "mpp10", "mpp11",
|
|
"mpp12", "mpp13", "mpp14",
|
|
"mpp15", "mpp16", "mpp17";
|
|
marvell,function = "ge0";
|
|
};
|
|
|
|
ge1_rgmii_pins: ge-rgmii-pins-1 {
|
|
marvell,pins = "mpp21", "mpp27", "mpp28",
|
|
"mpp29", "mpp30", "mpp31",
|
|
"mpp32", "mpp37", "mpp38",
|
|
"mpp39", "mpp40", "mpp41";
|
|
marvell,function = "ge1";
|
|
};
|
|
|
|
i2c0_pins: i2c-pins-0 {
|
|
marvell,pins = "mpp2", "mpp3";
|
|
marvell,function = "i2c0";
|
|
};
|
|
|
|
mdio_pins: mdio-pins {
|
|
marvell,pins = "mpp4", "mpp5";
|
|
marvell,function = "ge";
|
|
};
|
|
|
|
ref_clk0_pins: ref-clk-pins-0 {
|
|
marvell,pins = "mpp45";
|
|
marvell,function = "ref";
|
|
};
|
|
|
|
ref_clk1_pins: ref-clk-pins-1 {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "ref";
|
|
};
|
|
|
|
spi0_pins: spi-pins-0 {
|
|
marvell,pins = "mpp22", "mpp23", "mpp24",
|
|
"mpp25";
|
|
marvell,function = "spi0";
|
|
};
|
|
|
|
spi1_pins: spi-pins-1 {
|
|
marvell,pins = "mpp56", "mpp57", "mpp58",
|
|
"mpp59";
|
|
marvell,function = "spi1";
|
|
};
|
|
|
|
nand_pins: nand-pins {
|
|
marvell,pins = "mpp22", "mpp34", "mpp23",
|
|
"mpp33", "mpp38", "mpp28",
|
|
"mpp40", "mpp42", "mpp35",
|
|
"mpp36", "mpp25", "mpp30",
|
|
"mpp32";
|
|
marvell,function = "dev";
|
|
};
|
|
|
|
nand_rb: nand-rb {
|
|
marvell,pins = "mpp41";
|
|
marvell,function = "nand";
|
|
};
|
|
|
|
uart0_pins: uart-pins-0 {
|
|
marvell,pins = "mpp0", "mpp1";
|
|
marvell,function = "ua0";
|
|
};
|
|
|
|
uart1_pins: uart-pins-1 {
|
|
marvell,pins = "mpp19", "mpp20";
|
|
marvell,function = "ua1";
|
|
};
|
|
|
|
sdhci_pins: sdhci-pins {
|
|
marvell,pins = "mpp48", "mpp49", "mpp50",
|
|
"mpp52", "mpp53", "mpp54",
|
|
"mpp55", "mpp57", "mpp58",
|
|
"mpp59";
|
|
marvell,function = "sd0";
|
|
};
|
|
|
|
sata0_pins: sata-pins-0 {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "sata0";
|
|
};
|
|
|
|
sata1_pins: sata-pins-1 {
|
|
marvell,pins = "mpp19";
|
|
marvell,function = "sata1";
|
|
};
|
|
|
|
sata2_pins: sata-pins-2 {
|
|
marvell,pins = "mpp47";
|
|
marvell,function = "sata2";
|
|
};
|
|
|
|
sata3_pins: sata-pins-3 {
|
|
marvell,pins = "mpp44";
|
|
marvell,function = "sata3";
|
|
};
|
|
};
|
|
|
|
gpio0: gpio@18100 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18100 0x40>, <0x181c0 0x08>;
|
|
reg-names = "gpio", "pwm";
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#pwm-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
gpio1: gpio@18140 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18140 0x40>, <0x181c8 0x08>;
|
|
reg-names = "gpio", "pwm";
|
|
ngpios = <28>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#pwm-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
systemc: system-controller@18200 {
|
|
compatible = "marvell,armada-380-system-controller",
|
|
"marvell,armada-370-xp-system-controller";
|
|
reg = <0x18200 0x100>;
|
|
};
|
|
|
|
gateclk: clock-gating-control@18220 {
|
|
compatible = "marvell,armada-380-gating-clock";
|
|
reg = <0x18220 0x4>;
|
|
clocks = <&coreclk 0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
comphy: phy@18300 {
|
|
compatible = "marvell,armada-380-comphy";
|
|
reg = <0x18300 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
comphy0: phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
comphy1: phy@1 {
|
|
reg = <1>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
comphy2: phy@2 {
|
|
reg = <2>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
comphy3: phy@3 {
|
|
reg = <3>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
comphy4: phy@4 {
|
|
reg = <4>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
comphy5: phy@5 {
|
|
reg = <5>;
|
|
#phy-cells = <1>;
|
|
};
|
|
};
|
|
|
|
coreclk: mvebu-sar@18600 {
|
|
compatible = "marvell,armada-380-core-clock";
|
|
reg = <0x18600 0x04>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>,
|
|
<0x20250 0x8>;
|
|
};
|
|
|
|
mpic: interrupt-controller@20a00 {
|
|
compatible = "marvell,mpic";
|
|
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
msi-controller;
|
|
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
timer: timer@20300 {
|
|
compatible = "marvell,armada-380-timer",
|
|
"marvell,armada-xp-timer";
|
|
reg = <0x20300 0x30>, <0x21040 0x30>;
|
|
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&mpic 5>,
|
|
<&mpic 6>;
|
|
clocks = <&coreclk 2>, <&refclk>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
watchdog: watchdog@20300 {
|
|
compatible = "marvell,armada-380-wdt";
|
|
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
|
|
clocks = <&coreclk 2>, <&refclk>;
|
|
clock-names = "nbclk", "fixed";
|
|
};
|
|
|
|
cpurst: cpurst@20800 {
|
|
compatible = "marvell,armada-370-cpu-reset";
|
|
reg = <0x20800 0x10>;
|
|
};
|
|
|
|
mpcore-soc-ctrl@20d20 {
|
|
compatible = "marvell,armada-380-mpcore-soc-ctrl";
|
|
reg = <0x20d20 0x6c>;
|
|
};
|
|
|
|
coherencyfab: coherency-fabric@21010 {
|
|
compatible = "marvell,armada-380-coherency-fabric";
|
|
reg = <0x21010 0x1c>;
|
|
};
|
|
|
|
pmsu: pmsu@22000 {
|
|
compatible = "marvell,armada-380-pmsu";
|
|
reg = <0x22000 0x1000>;
|
|
};
|
|
|
|
/*
|
|
* As a special exception to the "order by
|
|
* register address" rule, the eth0 node is
|
|
* placed here to ensure that it gets
|
|
* registered as the first interface, since
|
|
* the network subsystem doesn't allow naming
|
|
* interfaces using DT aliases. Without this,
|
|
* the ordering of interfaces is different
|
|
* from the one used in U-Boot and the
|
|
* labeling of interfaces on the boards, which
|
|
* is very confusing for users.
|
|
*/
|
|
eth0: ethernet@70000 {
|
|
compatible = "marvell,armada-370-neta";
|
|
reg = <0x70000 0x4000>;
|
|
interrupts-extended = <&mpic 8>;
|
|
clocks = <&gateclk 4>;
|
|
tx-csum-limit = <9800>;
|
|
status = "disabled";
|
|
};
|
|
|
|
eth1: ethernet@30000 {
|
|
compatible = "marvell,armada-370-neta";
|
|
reg = <0x30000 0x4000>;
|
|
interrupts-extended = <&mpic 10>;
|
|
clocks = <&gateclk 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
eth2: ethernet@34000 {
|
|
compatible = "marvell,armada-370-neta";
|
|
reg = <0x34000 0x4000>;
|
|
interrupts-extended = <&mpic 12>;
|
|
clocks = <&gateclk 2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb0: usb@58000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x58000 0x500>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
xor0: xor@60800 {
|
|
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
|
|
reg = <0x60800 0x100
|
|
0x60a00 0x100>;
|
|
clocks = <&gateclk 22>;
|
|
status = "okay";
|
|
|
|
xor00 {
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor01 {
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
xor1: xor@60900 {
|
|
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
|
|
reg = <0x60900 0x100
|
|
0x60b00 0x100>;
|
|
clocks = <&gateclk 28>;
|
|
status = "okay";
|
|
|
|
xor10 {
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor11 {
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
mdio: mdio@72004 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "marvell,orion-mdio";
|
|
reg = <0x72004 0x4>;
|
|
clocks = <&gateclk 4>;
|
|
};
|
|
|
|
cesa: crypto@90000 {
|
|
compatible = "marvell,armada-38x-crypto";
|
|
reg = <0x90000 0x10000>;
|
|
reg-names = "regs";
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 23>, <&gateclk 21>,
|
|
<&gateclk 14>, <&gateclk 16>;
|
|
clock-names = "cesa0", "cesa1",
|
|
"cesaz0", "cesaz1";
|
|
marvell,crypto-srams = <&crypto_sram0>,
|
|
<&crypto_sram1>;
|
|
marvell,crypto-sram-size = <0x800>;
|
|
};
|
|
|
|
rtc: rtc@a3800 {
|
|
compatible = "marvell,armada-380-rtc";
|
|
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
|
|
reg-names = "rtc", "rtc-soc";
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ahci0: sata@a8000 {
|
|
compatible = "marvell,armada-380-ahci";
|
|
reg = <0xa8000 0x2000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
bm: bm@c8000 {
|
|
compatible = "marvell,armada-380-neta-bm";
|
|
reg = <0xc8000 0xac>;
|
|
clocks = <&gateclk 13>;
|
|
internal-mem = <&bm_bppi>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ahci1: sata@e0000 {
|
|
compatible = "marvell,armada-380-ahci";
|
|
reg = <0xe0000 0x2000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 30>;
|
|
status = "disabled";
|
|
};
|
|
|
|
coredivclk: clock@e4250 {
|
|
compatible = "marvell,armada-380-corediv-clock";
|
|
reg = <0xe4250 0xc>;
|
|
#clock-cells = <1>;
|
|
clocks = <&mainpll>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
thermal: thermal@e8078 {
|
|
compatible = "marvell,armada380-thermal";
|
|
reg = <0xe4078 0x4>, <0xe4070 0x8>;
|
|
status = "okay";
|
|
};
|
|
|
|
nand_controller: nand-controller@d0000 {
|
|
compatible = "marvell,armada370-nand-controller";
|
|
reg = <0xd0000 0x54>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coredivclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci: sdhci@d8000 {
|
|
compatible = "marvell,armada-380-sdhci";
|
|
reg-names = "sdhci", "mbus", "conf-sdio3";
|
|
reg = <0xd8000 0x1000>,
|
|
<0xdc000 0x100>,
|
|
<0x18454 0x4>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 17>;
|
|
mrvl,clk-delay-cycles = <0x1F>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3_0: usb3@f0000 {
|
|
compatible = "marvell,armada-380-xhci";
|
|
reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 9>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3_1: usb3@f8000 {
|
|
compatible = "marvell,armada-380-xhci";
|
|
reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gateclk 10>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
crypto_sram0: sa-sram0 {
|
|
compatible = "mmio-sram";
|
|
reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
|
|
clocks = <&gateclk 23>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
|
|
};
|
|
|
|
crypto_sram1: sa-sram1 {
|
|
compatible = "mmio-sram";
|
|
reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
|
|
clocks = <&gateclk 21>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
|
|
};
|
|
|
|
bm_bppi: bm-bppi {
|
|
compatible = "mmio-sram";
|
|
reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
|
|
ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&gateclk 13>;
|
|
no-memory-wc;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@10600 {
|
|
compatible = "marvell,armada-380-spi",
|
|
"marvell,orion-spi";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@10680 {
|
|
compatible = "marvell,armada-380-spi",
|
|
"marvell,orion-spi";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
/* 1 GHz fixed main PLL */
|
|
mainpll: mainpll {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000000>;
|
|
};
|
|
|
|
/* 25 MHz reference crystal */
|
|
refclk: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
};
|
|
};
|