linux/drivers/usb/serial
Frank Schäfer b9208c721c usb: pl2303: remove 500000 baud from the list of standard baud rates
Commit 0c967e7e "USB: serial: pl2303 works at 500kbps" added 500000
baud to the list of supported standard baud rates.
But the reason why the driver works with this baud rate is, that since
commit 8d48fdf6 "USB: PL2303: correctly handle baudrates above 115200"
a second (divisor based) baud rate encoding method is used for values
above 115200 baud, which is not limited to a fixed set of standard baud
rates.

Remove the 500000 baud value from the list of standard baud rates
again, because this list is only used with the direct baud rate
encoding method and 500000 baud is not supported with this method.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 15:43:40 -07:00
..
aircable.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ark3116.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
belkin_sa.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
belkin_sa.h
bus.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
ch341.c USB: ch341: fix TIOCMIWAIT and disconnect 2013-03-25 13:50:52 -07:00
console.c USB: console: remove unnecessary operations test 2013-07-23 16:24:32 -07:00
cp210x.c Merge 3.11-rc3 into usb-next 2013-07-29 07:43:16 -07:00
cyberjack.c USB: cyberjack: fix disconnect handling 2013-03-25 13:48:26 -07:00
cypress_m8.c USB: serial: set drain delay at port probe 2013-07-23 16:21:50 -07:00
cypress_m8.h USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device 2013-06-03 10:33:10 -07:00
digi_acceleport.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
empeg.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ezusb_convert.pl
f81232.c USB: serial: set drain delay at port probe 2013-07-23 16:21:50 -07:00
ftdi_sio_ids.h USB: serial: ftdi_sio: add more RT Systems ftdi devices 2013-07-29 13:38:38 -07:00
ftdi_sio.c Merge 3.11-rc4 into usb-next 2013-08-05 08:36:14 +08:00
ftdi_sio.h
garmin_gps.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
generic.c USB: serial: remove hupping check from tiocmiwait 2013-07-23 16:21:50 -07:00
io_16654.h
io_edgeport.c USB: io_edgeport: remove unused defines 2013-07-23 16:28:22 -07:00
io_edgeport.h
io_ionsp.h
io_tables.h USB: io_edgeport: switch to generic TIOCMIWAIT implementation 2013-03-25 13:50:53 -07:00
io_ti.c USB: io_ti: move port initialisation to probe 2013-07-23 16:28:23 -07:00
io_ti.h
io_usbvend.h
ipaq.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ipw.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ir-usb.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
iuu_phoenix.c USB: iuu_phoenix: fix bulk-message timeout 2013-05-29 10:50:43 +09:00
iuu_phoenix.h
Kconfig USB: serial: move the "simple" drivers into usb-serial-simple.c 2013-08-12 12:14:52 -07:00
keyspan_pda.c USB patches for 3.10-rc1 2013-04-29 12:19:23 -07:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
keyspan.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
keyspan.h USB: keyspan: fix NULL-pointer dereferences and memory leaks 2012-10-25 09:37:13 -07:00
kl5kusb105.c USB: kl5kusb105: always disable uart on close 2013-03-25 13:54:31 -07:00
kl5kusb105.h
kobil_sct.c USB: kobil_sct: use port interrupt-out urb 2013-04-17 10:05:35 -07:00
kobil_sct.h
Makefile USB: serial: move the "simple" drivers into usb-serial-simple.c 2013-08-12 12:14:52 -07:00
Makefile-keyspan_pda_fw
mct_u232.c USB: mct_u232: clean up read implementation 2013-04-17 10:05:35 -07:00
mct_u232.h
metro-usb.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
mos7720.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
mos7840.c Merge 3.11-rc4 into usb-next 2013-08-05 08:36:14 +08:00
navman.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
omninet.c USB: omninet: switch to generic read implementation 2013-04-17 10:05:34 -07:00
opticon.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
option.c usb: serial: option.c: remove ONDA MT825UP product ID fromdriver 2013-07-25 11:28:31 -07:00
oti6858.c USB: oti6858: do not call set_termios with uninitialised data 2013-07-23 16:24:33 -07:00
oti6858.h
pl2303.c usb: pl2303: remove 500000 baud from the list of standard baud rates 2013-08-12 15:43:40 -07:00
pl2303.h
qcaux.c qcaux: add Franklin U600 2013-03-11 11:09:17 -07:00
qcserial.c USB: option,qcserial: move Novatel Gobi1K IDs to qcserial 2013-06-24 16:21:53 -07:00
quatech2.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
safe_serial.c USB: safe_serial: remove vendor/product module parameters 2013-07-23 16:28:23 -07:00
sierra.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
spcp8x5.c USB: serial: set drain delay at port probe 2013-07-23 16:21:50 -07:00
ssu100.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
symbolserial.c USB: symbolserial: move private-data allocation to port_probe 2013-04-17 10:05:35 -07:00
ti_usb_3410_5052.c Merge 3.11-rc3 into usb-next 2013-07-29 07:43:16 -07:00
ti_usb_3410_5052.h USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable 2013-06-19 15:54:45 -07:00
usb_debug.c
usb_wwan.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
usb-serial-simple.c USB: serial: move the "simple" drivers into usb-serial-simple.c 2013-08-12 12:14:52 -07:00
usb-serial.c USB: serial: clean up dtr_rts 2013-07-23 16:21:50 -07:00
usb-wwan.h USB: usb-wwan: fix multiple memory leaks in error paths 2012-10-25 09:37:13 -07:00
visor.c USB: visor: fix initialisation of Treo/Kyocera devices 2013-05-29 10:47:45 +09:00
visor.h
whiteheat.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
whiteheat.h
wishbone-serial.c USB: serial: wishbone-serial: fix up minor sparse warning 2013-04-11 08:45:34 -07:00
xsens_mt.c usb: add driver for xsens motion trackers 2013-01-25 09:56:54 -08:00
zte_ev.c USB: option,zte_ev: move most ZTE CDMA devices to zte_ev 2013-06-06 09:06:25 -07:00