korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-12 21:44:06 +08:00
Code Issues Packages Projects Releases Wiki Activity
b8c0aa46b3
linux/arch/mips/jz4740/board-qi_lb60.c
Lars-Peter Clausen 218e18a372 ASoC: qi_lb60: Use GPIO descriptor API 
The new GPIO descriptor API is now the preferred way for handling GPIOs. It also
allows us to separate the platform depended code from the platform independent
code (Which will make it possible to increase build test coverage of the
platform independent code).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23 12:18:36 +01:00

517 lines
12 KiB
C
Raw Blame History

/*
* linux/arch/mips/jz4740/board-qi_lb60.c
*
* QI_LB60 board support
*
* Copyright (c) 2009 Qi Hardware inc.,
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
* Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or later
* as published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/power_supply.h>
#include <linux/power/jz4740-battery.h>
#include <linux/power/gpio-charger.h>
#include <asm/mach-jz4740/jz4740_fb.h>
#include <asm/mach-jz4740/jz4740_mmc.h>
#include <asm/mach-jz4740/jz4740_nand.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/leds_pwm.h>
#include <asm/mach-jz4740/platform.h>
#include "clock.h"
static bool is_avt2;
/* GPIOs */
#define QI_LB60_GPIO_SD_CD JZ_GPIO_PORTD(0)
#define QI_LB60_GPIO_SD_VCC_EN_N JZ_GPIO_PORTD(2)
#define QI_LB60_GPIO_KEYOUT(x) (JZ_GPIO_PORTC(10) + (x))
#define QI_LB60_GPIO_KEYIN(x) (JZ_GPIO_PORTD(18) + (x))
#define QI_LB60_GPIO_KEYIN8 JZ_GPIO_PORTD(26)
/* NAND */
static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
.eccbytes = 36,
.eccpos = {
6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28, 29,
30, 31, 32, 33, 34, 35, 36, 37,
38, 39, 40, 41
},
.oobfree = {
{ .offset = 2, .length = 4 },
{ .offset = 42, .length = 22 }
},
};
/* Early prototypes of the QI LB60 had only 1GB of NAND.
* In order to support these devices as well the partition and ecc layout is
* initialized depending on the NAND size */
static struct mtd_partition qi_lb60_partitions_1gb[] = {
{
.name = "NAND BOOT partition",
.offset = 0 * 0x100000,
.size = 4 * 0x100000,
},
{
.name = "NAND KERNEL partition",
.offset = 4 * 0x100000,
.size = 4 * 0x100000,
},
{
.name = "NAND ROOTFS partition",
.offset = 8 * 0x100000,
.size = (504 + 512) * 0x100000,
},
};
static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
.eccbytes = 72,
.eccpos = {
12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, 25, 26, 27,
28, 29, 30, 31, 32, 33, 34, 35,
36, 37, 38, 39, 40, 41, 42, 43,
44, 45, 46, 47, 48, 49, 50, 51,
52, 53, 54, 55, 56, 57, 58, 59,
60, 61, 62, 63, 64, 65, 66, 67,
68, 69, 70, 71, 72, 73, 74, 75,
76, 77, 78, 79, 80, 81, 82, 83
},
.oobfree = {
{ .offset = 2, .length = 10 },
{ .offset = 84, .length = 44 },
},
};
static struct mtd_partition qi_lb60_partitions_2gb[] = {
{
.name = "NAND BOOT partition",
.offset = 0 * 0x100000,
.size = 4 * 0x100000,
},
{
.name = "NAND KERNEL partition",
.offset = 4 * 0x100000,
.size = 4 * 0x100000,
},
{
.name = "NAND ROOTFS partition",
.offset = 8 * 0x100000,
.size = (504 + 512 + 1024) * 0x100000,
},
};
static void qi_lb60_nand_ident(struct platform_device *pdev,
struct nand_chip *chip, struct mtd_partition **partitions,
int *num_partitions)
{
if (chip->page_shift == 12) {
chip->ecc.layout = &qi_lb60_ecclayout_2gb;
*partitions = qi_lb60_partitions_2gb;
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
} else {
chip->ecc.layout = &qi_lb60_ecclayout_1gb;
*partitions = qi_lb60_partitions_1gb;
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
}
}
static struct jz_nand_platform_data qi_lb60_nand_pdata = {
.ident_callback = qi_lb60_nand_ident,
.busy_gpio = 94,
.banks = { 1 },
};
/* Keyboard*/
#define KEY_QI_QI KEY_F13
#define KEY_QI_UPRED KEY_RIGHTALT
#define KEY_QI_VOLUP KEY_VOLUMEUP
#define KEY_QI_VOLDOWN KEY_VOLUMEDOWN
#define KEY_QI_FN KEY_LEFTCTRL
static const uint32_t qi_lb60_keymap[] = {
KEY(0, 0, KEY_F1), /* S2 */
KEY(0, 1, KEY_F2), /* S3 */
KEY(0, 2, KEY_F3), /* S4 */
KEY(0, 3, KEY_F4), /* S5 */
KEY(0, 4, KEY_F5), /* S6 */
KEY(0, 5, KEY_F6), /* S7 */
KEY(0, 6, KEY_F7), /* S8 */
KEY(1, 0, KEY_Q), /* S10 */
KEY(1, 1, KEY_W), /* S11 */
KEY(1, 2, KEY_E), /* S12 */
KEY(1, 3, KEY_R), /* S13 */
KEY(1, 4, KEY_T), /* S14 */
KEY(1, 5, KEY_Y), /* S15 */
KEY(1, 6, KEY_U), /* S16 */
KEY(1, 7, KEY_I), /* S17 */
KEY(2, 0, KEY_A), /* S18 */
KEY(2, 1, KEY_S), /* S19 */
KEY(2, 2, KEY_D), /* S20 */
KEY(2, 3, KEY_F), /* S21 */
KEY(2, 4, KEY_G), /* S22 */
KEY(2, 5, KEY_H), /* S23 */
KEY(2, 6, KEY_J), /* S24 */
KEY(2, 7, KEY_K), /* S25 */
KEY(3, 0, KEY_ESC), /* S26 */
KEY(3, 1, KEY_Z), /* S27 */
KEY(3, 2, KEY_X), /* S28 */
KEY(3, 3, KEY_C), /* S29 */
KEY(3, 4, KEY_V), /* S30 */
KEY(3, 5, KEY_B), /* S31 */
KEY(3, 6, KEY_N), /* S32 */
KEY(3, 7, KEY_M), /* S33 */
KEY(4, 0, KEY_TAB), /* S34 */
KEY(4, 1, KEY_CAPSLOCK), /* S35 */
KEY(4, 2, KEY_BACKSLASH), /* S36 */
KEY(4, 3, KEY_APOSTROPHE), /* S37 */
KEY(4, 4, KEY_COMMA), /* S38 */
KEY(4, 5, KEY_DOT), /* S39 */
KEY(4, 6, KEY_SLASH), /* S40 */
KEY(4, 7, KEY_UP), /* S41 */
KEY(5, 0, KEY_O), /* S42 */
KEY(5, 1, KEY_L), /* S43 */
KEY(5, 2, KEY_EQUAL), /* S44 */
KEY(5, 3, KEY_QI_UPRED), /* S45 */
KEY(5, 4, KEY_SPACE), /* S46 */
KEY(5, 5, KEY_QI_QI), /* S47 */
KEY(5, 6, KEY_RIGHTCTRL), /* S48 */
KEY(5, 7, KEY_LEFT), /* S49 */
KEY(6, 0, KEY_F8), /* S50 */
KEY(6, 1, KEY_P), /* S51 */
KEY(6, 2, KEY_BACKSPACE),/* S52 */
KEY(6, 3, KEY_ENTER), /* S53 */
KEY(6, 4, KEY_QI_VOLUP), /* S54 */
KEY(6, 5, KEY_QI_VOLDOWN), /* S55 */
KEY(6, 6, KEY_DOWN), /* S56 */
KEY(6, 7, KEY_RIGHT), /* S57 */
KEY(7, 0, KEY_LEFTSHIFT), /* S58 */
KEY(7, 1, KEY_LEFTALT), /* S59 */
KEY(7, 2, KEY_QI_FN), /* S60 */
};
static const struct matrix_keymap_data qi_lb60_keymap_data = {
.keymap = qi_lb60_keymap,
.keymap_size = ARRAY_SIZE(qi_lb60_keymap),
};
static const unsigned int qi_lb60_keypad_cols[] = {
QI_LB60_GPIO_KEYOUT(0),
QI_LB60_GPIO_KEYOUT(1),
QI_LB60_GPIO_KEYOUT(2),
QI_LB60_GPIO_KEYOUT(3),
QI_LB60_GPIO_KEYOUT(4),
QI_LB60_GPIO_KEYOUT(5),
QI_LB60_GPIO_KEYOUT(6),
QI_LB60_GPIO_KEYOUT(7),
};
static const unsigned int qi_lb60_keypad_rows[] = {
QI_LB60_GPIO_KEYIN(0),
QI_LB60_GPIO_KEYIN(1),
QI_LB60_GPIO_KEYIN(2),
QI_LB60_GPIO_KEYIN(3),
QI_LB60_GPIO_KEYIN(4),
QI_LB60_GPIO_KEYIN(5),
QI_LB60_GPIO_KEYIN(6),
QI_LB60_GPIO_KEYIN8,
};
static struct matrix_keypad_platform_data qi_lb60_pdata = {
.keymap_data = &qi_lb60_keymap_data,
.col_gpios = qi_lb60_keypad_cols,
.row_gpios = qi_lb60_keypad_rows,
.num_col_gpios = ARRAY_SIZE(qi_lb60_keypad_cols),
.num_row_gpios = ARRAY_SIZE(qi_lb60_keypad_rows),
.col_scan_delay_us = 10,
.debounce_ms = 10,
.wakeup = 1,
.active_low = 1,
};
static struct platform_device qi_lb60_keypad = {
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &qi_lb60_pdata,
},
};
/* Display */
static struct fb_videomode qi_lb60_video_modes[] = {
{
.name = "320x240",
.xres = 320,
.yres = 240,
.refresh = 30,
.left_margin = 140,
.right_margin = 273,
.upper_margin = 20,
.lower_margin = 2,
.hsync_len = 1,
.vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
};
static struct jz4740_fb_platform_data qi_lb60_fb_pdata = {
.width = 60,
.height = 45,
.num_modes = ARRAY_SIZE(qi_lb60_video_modes),
.modes = qi_lb60_video_modes,
.bpp = 24,
.lcd_type = JZ_LCD_TYPE_8BIT_SERIAL,
.pixclk_falling_edge = 1,
};
struct spi_gpio_platform_data spigpio_platform_data = {
.sck = JZ_GPIO_PORTC(23),
.mosi = JZ_GPIO_PORTC(22),
.miso = -1,
.num_chipselect = 1,
};
static struct platform_device spigpio_device = {
.name = "spi_gpio",
.id = 1,
.dev = {
.platform_data = &spigpio_platform_data,
},
};
static struct spi_board_info qi_lb60_spi_board_info[] = {
{
.modalias = "ili8960",
.controller_data = (void *)JZ_GPIO_PORTC(21),
.chip_select = 0,
.bus_num = 1,
.max_speed_hz = 30 * 1000,
.mode = SPI_3WIRE,
},
};
/* Battery */
static struct jz_battery_platform_data qi_lb60_battery_pdata = {
.gpio_charge = JZ_GPIO_PORTC(27),
.gpio_charge_active_low = 1,
.info = {
.name = "battery",
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
.voltage_max_design = 4200000,
.voltage_min_design = 3600000,
},
};
/* GPIO Key: power */
static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = {
[0] = {
.code = KEY_POWER,
.gpio = JZ_GPIO_PORTD(29),
.active_low = 1,
.desc = "Power",
.wakeup = 1,
},
};
static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = {
.nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons),
.buttons = qi_lb60_gpio_keys_buttons,
};
static struct platform_device qi_lb60_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &qi_lb60_gpio_keys_data,
}
};
static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = {
.gpio_card_detect = QI_LB60_GPIO_SD_CD,
.gpio_read_only = -1,
.gpio_power = QI_LB60_GPIO_SD_VCC_EN_N,
.power_active_low = 1,
};
/* OHCI */
static struct regulator_consumer_supply avt2_usb_regulator_consumer =
REGULATOR_SUPPLY("vbus", "jz4740-ohci");
static struct regulator_init_data avt2_usb_regulator_init_data = {
.num_consumer_supplies = 1,
.consumer_supplies = &avt2_usb_regulator_consumer,
.constraints = {
.name = "USB power",
.min_uV = 5000000,
.max_uV = 5000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct fixed_voltage_config avt2_usb_regulator_data = {
.supply_name = "USB power",
.microvolts = 5000000,
.gpio = JZ_GPIO_PORTB(17),
.init_data = &avt2_usb_regulator_init_data,
};
static struct platform_device avt2_usb_regulator_device = {
.name = "reg-fixed-voltage",
.id = -1,
.dev = {
.platform_data = &avt2_usb_regulator_data,
}
};
/* beeper */
static struct platform_device qi_lb60_pwm_beeper = {
.name = "pwm-beeper",
.id = -1,
.dev = {
.platform_data = (void *)4,
},
};
/* charger */
static char *qi_lb60_batteries[] = {
"battery",
};
static struct gpio_charger_platform_data qi_lb60_charger_pdata = {
.name = "usb",
.type = POWER_SUPPLY_TYPE_USB,
.gpio = JZ_GPIO_PORTD(28),
.gpio_active_low = 1,
.supplied_to = qi_lb60_batteries,
.num_supplicants = ARRAY_SIZE(qi_lb60_batteries),
};
static struct platform_device qi_lb60_charger_device = {
.name = "gpio-charger",
.dev = {
.platform_data = &qi_lb60_charger_pdata,
},
};
/* audio */
static struct platform_device qi_lb60_audio_device = {
.name = "qi-lb60-audio",
.id = -1,
};
static struct gpiod_lookup_table qi_lb60_audio_gpio_table = {
.dev_id = "qi-lb60-audio",
.table = {
GPIO_LOOKUP("Bank B", 29, "snd", 0),
GPIO_LOOKUP("Bank D", 4, "amp", 0),
{ },
},
};
static struct platform_device *jz_platform_devices[] __initdata = {
&jz4740_udc_device,
&jz4740_udc_xceiv_device,
&jz4740_mmc_device,
&jz4740_nand_device,
&qi_lb60_keypad,
&spigpio_device,
&jz4740_framebuffer_device,
&jz4740_pcm_device,
&jz4740_i2s_device,
&jz4740_codec_device,
&jz4740_rtc_device,
&jz4740_adc_device,
&jz4740_pwm_device,
&jz4740_dma_device,
&qi_lb60_gpio_keys,
&qi_lb60_pwm_beeper,
&qi_lb60_charger_device,
&qi_lb60_audio_device,
};
static void __init board_gpio_setup(void)
{
/* We only need to enable/disable pullup here for pins used in generic
* drivers. Everything else is done by the drivers themselves. */
jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N);
jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD);
}
static int __init qi_lb60_init_platform_devices(void)
{
jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata;
jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata;
jz4740_adc_device.dev.platform_data = &qi_lb60_battery_pdata;
jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
jz4740_serial_device_register();
spi_register_board_info(qi_lb60_spi_board_info,
ARRAY_SIZE(qi_lb60_spi_board_info));
if (is_avt2) {
platform_device_register(&avt2_usb_regulator_device);
platform_device_register(&jz4740_usb_ohci_device);
}
return platform_add_devices(jz_platform_devices,
ARRAY_SIZE(jz_platform_devices));
}
struct jz4740_clock_board_data jz4740_clock_bdata = {
.ext_rate = 12000000,
.rtc_rate = 32768,
};
static __init int board_avt2(char *str)
{
qi_lb60_mmc_pdata.card_detect_active_low = 1;
is_avt2 = true;
return 1;
}
__setup("avt2", board_avt2);
static int __init qi_lb60_board_setup(void)
{
printk(KERN_INFO "Qi Hardware JZ4740 QI %s setup\n",
is_avt2 ? "AVT2" : "LB60");
board_gpio_setup();
if (qi_lb60_init_platform_devices())
panic("Failed to initialize platform devices");
return 0;
}
arch_initcall(qi_lb60_board_setup);
Reference in New Issue View Git Blame Copy Permalink