mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
53da0ebaad
Currently DSA exposes the following sysfs:
$ cat /sys/class/net/eno2/dsa/tagging
ocelot
which is a read-only device attribute, introduced in the kernel as
commit 98cdb48071
("net: dsa: Expose tagging protocol to user-space"),
and used by libpcap since its commit 993db3800d7d ("Add support for DSA
link-layer types").
It would be nice if we could extend this device attribute by making it
writable:
$ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
This is useful with DSA switches that can make use of more than one
tagging protocol. It may be useful in dsa_loop in the future too, to
perform offline testing of various taggers, or for changing between dsa
and edsa on Marvell switches, if that is desirable.
In terms of implementation, drivers can support this feature by
implementing .change_tag_protocol, which should always leave the switch
in a consistent state: either with the new protocol if things went well,
or with the old one if something failed. Teardown of the old protocol,
if necessary, must be handled by the driver.
Some things remain as before:
- The .get_tag_protocol is currently only called at probe time, to load
the initial tagging protocol driver. Nonetheless, new drivers should
report the tagging protocol in current use now.
- The driver should manage by itself the initial setup of tagging
protocol, no later than the .setup() method, as well as destroying
resources used by the last tagger in use, no earlier than the
.teardown() method.
For multi-switch DSA trees, error handling is a bit more complicated,
since e.g. the 5th out of 7 switches may fail to change the tag
protocol. When that happens, a revert to the original tag protocol is
attempted, but that may fail too, leaving the tree in an inconsistent
state despite each individual switch implementing .change_tag_protocol
transactionally. Since the intersection between drivers that implement
.change_tag_protocol and drivers that support D in DSA is currently the
empty set, the possibility for this error to happen is ignored for now.
Testing:
$ insmod mscc_felix.ko
[ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14
[ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517
$ insmod tag_ocelot.ko
$ rmmod mscc_felix.ko
$ insmod mscc_felix.ko
[ 97.261724] libphy: VSC9959 internal MDIO bus: probed
[ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0
[ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1
[ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2
[ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3
[ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode
[ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0
[ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode
[ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1
[ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode
[ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 98.527948] device eno2 entered promiscuous mode
[ 98.544755] DSA: tree 0 setup
$ ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms
64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms
^C
- 10.0.0.1 ping statistics -
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.754/1.545/2.337 ms
$ cat /sys/class/net/eno2/dsa/tagging
ocelot
$ cat ./test_ocelot_8021q.sh
#!/bin/bash
ip link set swp0 down
ip link set swp1 down
ip link set swp2 down
ip link set swp3 down
ip link set swp5 down
ip link set eno2 down
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
ip link set eno2 up
ip link set swp0 up
ip link set swp1 up
ip link set swp2 up
ip link set swp3 up
ip link set swp5 up
$ ./test_ocelot_8021q.sh
./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available
$ rmmod tag_ocelot.ko
rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable
$ insmod tag_ocelot_8021q.ko
$ ./test_ocelot_8021q.sh
$ cat /sys/class/net/eno2/dsa/tagging
ocelot-8021q
$ rmmod tag_ocelot.ko
$ rmmod tag_ocelot_8021q.ko
rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable
$ ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms
64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms
64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms
$ rmmod mscc_felix.ko
[ 645.544426] mscc_felix 0000:00:00.5: Link is Down
[ 645.838608] DSA: tree 0 torn down
$ rmmod tag_ocelot_8021q.ko
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
416 lines
10 KiB
C
416 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Handling of a master device, switching frames via its switch fabric CPU port
|
|
*
|
|
* Copyright (c) 2017 Savoir-faire Linux Inc.
|
|
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
|
|
*/
|
|
|
|
#include "dsa_priv.h"
|
|
|
|
static int dsa_master_get_regs_len(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int ret = 0;
|
|
int len;
|
|
|
|
if (ops->get_regs_len) {
|
|
len = ops->get_regs_len(dev);
|
|
if (len < 0)
|
|
return len;
|
|
ret += len;
|
|
}
|
|
|
|
ret += sizeof(struct ethtool_drvinfo);
|
|
ret += sizeof(struct ethtool_regs);
|
|
|
|
if (ds->ops->get_regs_len) {
|
|
len = ds->ops->get_regs_len(ds, port);
|
|
if (len < 0)
|
|
return len;
|
|
ret += len;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dsa_master_get_regs(struct net_device *dev,
|
|
struct ethtool_regs *regs, void *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct ethtool_drvinfo *cpu_info;
|
|
struct ethtool_regs *cpu_regs;
|
|
int port = cpu_dp->index;
|
|
int len;
|
|
|
|
if (ops->get_regs_len && ops->get_regs) {
|
|
len = ops->get_regs_len(dev);
|
|
if (len < 0)
|
|
return;
|
|
regs->len = len;
|
|
ops->get_regs(dev, regs, data);
|
|
data += regs->len;
|
|
}
|
|
|
|
cpu_info = (struct ethtool_drvinfo *)data;
|
|
strlcpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
|
|
data += sizeof(*cpu_info);
|
|
cpu_regs = (struct ethtool_regs *)data;
|
|
data += sizeof(*cpu_regs);
|
|
|
|
if (ds->ops->get_regs_len && ds->ops->get_regs) {
|
|
len = ds->ops->get_regs_len(ds, port);
|
|
if (len < 0)
|
|
return;
|
|
cpu_regs->len = len;
|
|
ds->ops->get_regs(ds, port, cpu_regs, data);
|
|
}
|
|
}
|
|
|
|
static void dsa_master_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats,
|
|
uint64_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int count = 0;
|
|
|
|
if (ops->get_sset_count && ops->get_ethtool_stats) {
|
|
count = ops->get_sset_count(dev, ETH_SS_STATS);
|
|
ops->get_ethtool_stats(dev, stats, data);
|
|
}
|
|
|
|
if (ds->ops->get_ethtool_stats)
|
|
ds->ops->get_ethtool_stats(ds, port, data + count);
|
|
}
|
|
|
|
static void dsa_master_get_ethtool_phy_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats,
|
|
uint64_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int count = 0;
|
|
|
|
if (dev->phydev && !ops->get_ethtool_phy_stats) {
|
|
count = phy_ethtool_get_sset_count(dev->phydev);
|
|
if (count >= 0)
|
|
phy_ethtool_get_stats(dev->phydev, stats, data);
|
|
} else if (ops->get_sset_count && ops->get_ethtool_phy_stats) {
|
|
count = ops->get_sset_count(dev, ETH_SS_PHY_STATS);
|
|
ops->get_ethtool_phy_stats(dev, stats, data);
|
|
}
|
|
|
|
if (count < 0)
|
|
count = 0;
|
|
|
|
if (ds->ops->get_ethtool_phy_stats)
|
|
ds->ops->get_ethtool_phy_stats(ds, port, data + count);
|
|
}
|
|
|
|
static int dsa_master_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int count = 0;
|
|
|
|
if (sset == ETH_SS_PHY_STATS && dev->phydev &&
|
|
!ops->get_ethtool_phy_stats)
|
|
count = phy_ethtool_get_sset_count(dev->phydev);
|
|
else if (ops->get_sset_count)
|
|
count = ops->get_sset_count(dev, sset);
|
|
|
|
if (count < 0)
|
|
count = 0;
|
|
|
|
if (ds->ops->get_sset_count)
|
|
count += ds->ops->get_sset_count(ds, cpu_dp->index, sset);
|
|
|
|
return count;
|
|
}
|
|
|
|
static void dsa_master_get_strings(struct net_device *dev, uint32_t stringset,
|
|
uint8_t *data)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
int port = cpu_dp->index;
|
|
int len = ETH_GSTRING_LEN;
|
|
int mcount = 0, count;
|
|
unsigned int i;
|
|
uint8_t pfx[4];
|
|
uint8_t *ndata;
|
|
|
|
snprintf(pfx, sizeof(pfx), "p%.2d", port);
|
|
/* We do not want to be NULL-terminated, since this is a prefix */
|
|
pfx[sizeof(pfx) - 1] = '_';
|
|
|
|
if (stringset == ETH_SS_PHY_STATS && dev->phydev &&
|
|
!ops->get_ethtool_phy_stats) {
|
|
mcount = phy_ethtool_get_sset_count(dev->phydev);
|
|
if (mcount < 0)
|
|
mcount = 0;
|
|
else
|
|
phy_ethtool_get_strings(dev->phydev, data);
|
|
} else if (ops->get_sset_count && ops->get_strings) {
|
|
mcount = ops->get_sset_count(dev, stringset);
|
|
if (mcount < 0)
|
|
mcount = 0;
|
|
ops->get_strings(dev, stringset, data);
|
|
}
|
|
|
|
if (ds->ops->get_strings) {
|
|
ndata = data + mcount * len;
|
|
/* This function copies ETH_GSTRINGS_LEN bytes, we will mangle
|
|
* the output after to prepend our CPU port prefix we
|
|
* constructed earlier
|
|
*/
|
|
ds->ops->get_strings(ds, port, stringset, ndata);
|
|
count = ds->ops->get_sset_count(ds, port, stringset);
|
|
for (i = 0; i < count; i++) {
|
|
memmove(ndata + (i * len + sizeof(pfx)),
|
|
ndata + i * len, len - sizeof(pfx));
|
|
memcpy(ndata + i * len, pfx, sizeof(pfx));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int dsa_master_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct dsa_switch_tree *dst;
|
|
int err = -EOPNOTSUPP;
|
|
struct dsa_port *dp;
|
|
|
|
dst = ds->dst;
|
|
|
|
switch (cmd) {
|
|
case SIOCGHWTSTAMP:
|
|
case SIOCSHWTSTAMP:
|
|
/* Deny PTP operations on master if there is at least one
|
|
* switch in the tree that is PTP capable.
|
|
*/
|
|
list_for_each_entry(dp, &dst->ports, list)
|
|
if (dp->ds->ops->port_hwtstamp_get ||
|
|
dp->ds->ops->port_hwtstamp_set)
|
|
return -EBUSY;
|
|
break;
|
|
}
|
|
|
|
if (dev->netdev_ops->ndo_do_ioctl)
|
|
err = dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct dsa_netdevice_ops dsa_netdev_ops = {
|
|
.ndo_do_ioctl = dsa_master_ioctl,
|
|
};
|
|
|
|
static int dsa_master_ethtool_setup(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct ethtool_ops *ops;
|
|
|
|
ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL);
|
|
if (!ops)
|
|
return -ENOMEM;
|
|
|
|
cpu_dp->orig_ethtool_ops = dev->ethtool_ops;
|
|
if (cpu_dp->orig_ethtool_ops)
|
|
memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops));
|
|
|
|
ops->get_regs_len = dsa_master_get_regs_len;
|
|
ops->get_regs = dsa_master_get_regs;
|
|
ops->get_sset_count = dsa_master_get_sset_count;
|
|
ops->get_ethtool_stats = dsa_master_get_ethtool_stats;
|
|
ops->get_strings = dsa_master_get_strings;
|
|
ops->get_ethtool_phy_stats = dsa_master_get_ethtool_phy_stats;
|
|
|
|
dev->ethtool_ops = ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsa_master_ethtool_teardown(struct net_device *dev)
|
|
{
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
dev->ethtool_ops = cpu_dp->orig_ethtool_ops;
|
|
cpu_dp->orig_ethtool_ops = NULL;
|
|
}
|
|
|
|
static void dsa_netdev_ops_set(struct net_device *dev,
|
|
const struct dsa_netdevice_ops *ops)
|
|
{
|
|
dev->dsa_ptr->netdev_ops = ops;
|
|
}
|
|
|
|
static void dsa_master_set_promiscuity(struct net_device *dev, int inc)
|
|
{
|
|
const struct dsa_device_ops *ops = dev->dsa_ptr->tag_ops;
|
|
|
|
if (!ops->promisc_on_master)
|
|
return;
|
|
|
|
rtnl_lock();
|
|
dev_set_promiscuity(dev, inc);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static ssize_t tagging_show(struct device *d, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct net_device *dev = to_net_dev(d);
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
|
|
return sprintf(buf, "%s\n",
|
|
dsa_tag_protocol_to_str(cpu_dp->tag_ops));
|
|
}
|
|
|
|
static ssize_t tagging_store(struct device *d, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
const struct dsa_device_ops *new_tag_ops, *old_tag_ops;
|
|
struct net_device *dev = to_net_dev(d);
|
|
struct dsa_port *cpu_dp = dev->dsa_ptr;
|
|
int err;
|
|
|
|
old_tag_ops = cpu_dp->tag_ops;
|
|
new_tag_ops = dsa_find_tagger_by_name(buf);
|
|
/* Bad tagger name, or module is not loaded? */
|
|
if (IS_ERR(new_tag_ops))
|
|
return PTR_ERR(new_tag_ops);
|
|
|
|
if (new_tag_ops == old_tag_ops)
|
|
/* Drop the temporarily held duplicate reference, since
|
|
* the DSA switch tree uses this tagger.
|
|
*/
|
|
goto out;
|
|
|
|
err = dsa_tree_change_tag_proto(cpu_dp->ds->dst, dev, new_tag_ops,
|
|
old_tag_ops);
|
|
if (err) {
|
|
/* On failure the old tagger is restored, so we don't need the
|
|
* driver for the new one.
|
|
*/
|
|
dsa_tag_driver_put(new_tag_ops);
|
|
return err;
|
|
}
|
|
|
|
/* On success we no longer need the module for the old tagging protocol
|
|
*/
|
|
out:
|
|
dsa_tag_driver_put(old_tag_ops);
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_RW(tagging);
|
|
|
|
static struct attribute *dsa_slave_attrs[] = {
|
|
&dev_attr_tagging.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group dsa_group = {
|
|
.name = "dsa",
|
|
.attrs = dsa_slave_attrs,
|
|
};
|
|
|
|
static void dsa_master_reset_mtu(struct net_device *dev)
|
|
{
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
err = dev_set_mtu(dev, ETH_DATA_LEN);
|
|
if (err)
|
|
netdev_dbg(dev,
|
|
"Unable to reset MTU to exclude DSA overheads\n");
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static struct lock_class_key dsa_master_addr_list_lock_key;
|
|
|
|
int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp)
|
|
{
|
|
int mtu = ETH_DATA_LEN + cpu_dp->tag_ops->overhead;
|
|
struct dsa_switch *ds = cpu_dp->ds;
|
|
struct device_link *consumer_link;
|
|
int ret;
|
|
|
|
/* The DSA master must use SET_NETDEV_DEV for this to work. */
|
|
consumer_link = device_link_add(ds->dev, dev->dev.parent,
|
|
DL_FLAG_AUTOREMOVE_CONSUMER);
|
|
if (!consumer_link)
|
|
netdev_err(dev,
|
|
"Failed to create a device link to DSA switch %s\n",
|
|
dev_name(ds->dev));
|
|
|
|
rtnl_lock();
|
|
ret = dev_set_mtu(dev, mtu);
|
|
rtnl_unlock();
|
|
if (ret)
|
|
netdev_warn(dev, "error %d setting MTU to %d to include DSA overhead\n",
|
|
ret, mtu);
|
|
|
|
/* If we use a tagging format that doesn't have an ethertype
|
|
* field, make sure that all packets from this point on get
|
|
* sent to the tag format's receive function.
|
|
*/
|
|
wmb();
|
|
|
|
dev->dsa_ptr = cpu_dp;
|
|
lockdep_set_class(&dev->addr_list_lock,
|
|
&dsa_master_addr_list_lock_key);
|
|
|
|
dsa_master_set_promiscuity(dev, 1);
|
|
|
|
ret = dsa_master_ethtool_setup(dev);
|
|
if (ret)
|
|
goto out_err_reset_promisc;
|
|
|
|
dsa_netdev_ops_set(dev, &dsa_netdev_ops);
|
|
|
|
ret = sysfs_create_group(&dev->dev.kobj, &dsa_group);
|
|
if (ret)
|
|
goto out_err_ndo_teardown;
|
|
|
|
return ret;
|
|
|
|
out_err_ndo_teardown:
|
|
dsa_netdev_ops_set(dev, NULL);
|
|
dsa_master_ethtool_teardown(dev);
|
|
out_err_reset_promisc:
|
|
dsa_master_set_promiscuity(dev, -1);
|
|
return ret;
|
|
}
|
|
|
|
void dsa_master_teardown(struct net_device *dev)
|
|
{
|
|
sysfs_remove_group(&dev->dev.kobj, &dsa_group);
|
|
dsa_netdev_ops_set(dev, NULL);
|
|
dsa_master_ethtool_teardown(dev);
|
|
dsa_master_reset_mtu(dev);
|
|
dsa_master_set_promiscuity(dev, -1);
|
|
|
|
dev->dsa_ptr = NULL;
|
|
|
|
/* If we used a tagging format that doesn't have an ethertype
|
|
* field, make sure that all packets from this point get sent
|
|
* without the tag and go through the regular receive path.
|
|
*/
|
|
wmb();
|
|
}
|