mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 17:54:13 +08:00
2b27bdcc20
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1286 lines
33 KiB
C
1286 lines
33 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* This file is part of the APDS990x sensor driver.
|
|
* Chip is combined proximity and ambient light sensor.
|
|
*
|
|
* Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
|
|
*
|
|
* Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_data/apds990x.h>
|
|
|
|
/* Register map */
|
|
#define APDS990X_ENABLE 0x00 /* Enable of states and interrupts */
|
|
#define APDS990X_ATIME 0x01 /* ALS ADC time */
|
|
#define APDS990X_PTIME 0x02 /* Proximity ADC time */
|
|
#define APDS990X_WTIME 0x03 /* Wait time */
|
|
#define APDS990X_AILTL 0x04 /* ALS interrupt low threshold low byte */
|
|
#define APDS990X_AILTH 0x05 /* ALS interrupt low threshold hi byte */
|
|
#define APDS990X_AIHTL 0x06 /* ALS interrupt hi threshold low byte */
|
|
#define APDS990X_AIHTH 0x07 /* ALS interrupt hi threshold hi byte */
|
|
#define APDS990X_PILTL 0x08 /* Proximity interrupt low threshold low byte */
|
|
#define APDS990X_PILTH 0x09 /* Proximity interrupt low threshold hi byte */
|
|
#define APDS990X_PIHTL 0x0a /* Proximity interrupt hi threshold low byte */
|
|
#define APDS990X_PIHTH 0x0b /* Proximity interrupt hi threshold hi byte */
|
|
#define APDS990X_PERS 0x0c /* Interrupt persistence filters */
|
|
#define APDS990X_CONFIG 0x0d /* Configuration */
|
|
#define APDS990X_PPCOUNT 0x0e /* Proximity pulse count */
|
|
#define APDS990X_CONTROL 0x0f /* Gain control register */
|
|
#define APDS990X_REV 0x11 /* Revision Number */
|
|
#define APDS990X_ID 0x12 /* Device ID */
|
|
#define APDS990X_STATUS 0x13 /* Device status */
|
|
#define APDS990X_CDATAL 0x14 /* Clear ADC low data register */
|
|
#define APDS990X_CDATAH 0x15 /* Clear ADC high data register */
|
|
#define APDS990X_IRDATAL 0x16 /* IR ADC low data register */
|
|
#define APDS990X_IRDATAH 0x17 /* IR ADC high data register */
|
|
#define APDS990X_PDATAL 0x18 /* Proximity ADC low data register */
|
|
#define APDS990X_PDATAH 0x19 /* Proximity ADC high data register */
|
|
|
|
/* Control */
|
|
#define APDS990X_MAX_AGAIN 3
|
|
|
|
/* Enable register */
|
|
#define APDS990X_EN_PIEN (0x1 << 5)
|
|
#define APDS990X_EN_AIEN (0x1 << 4)
|
|
#define APDS990X_EN_WEN (0x1 << 3)
|
|
#define APDS990X_EN_PEN (0x1 << 2)
|
|
#define APDS990X_EN_AEN (0x1 << 1)
|
|
#define APDS990X_EN_PON (0x1 << 0)
|
|
#define APDS990X_EN_DISABLE_ALL 0
|
|
|
|
/* Status register */
|
|
#define APDS990X_ST_PINT (0x1 << 5)
|
|
#define APDS990X_ST_AINT (0x1 << 4)
|
|
|
|
/* I2C access types */
|
|
#define APDS990x_CMD_TYPE_MASK (0x03 << 5)
|
|
#define APDS990x_CMD_TYPE_RB (0x00 << 5) /* Repeated byte */
|
|
#define APDS990x_CMD_TYPE_INC (0x01 << 5) /* Auto increment */
|
|
#define APDS990x_CMD_TYPE_SPE (0x03 << 5) /* Special function */
|
|
|
|
#define APDS990x_ADDR_SHIFT 0
|
|
#define APDS990x_CMD 0x80
|
|
|
|
/* Interrupt ack commands */
|
|
#define APDS990X_INT_ACK_ALS 0x6
|
|
#define APDS990X_INT_ACK_PS 0x5
|
|
#define APDS990X_INT_ACK_BOTH 0x7
|
|
|
|
/* ptime */
|
|
#define APDS990X_PTIME_DEFAULT 0xff /* Recommended conversion time 2.7ms*/
|
|
|
|
/* wtime */
|
|
#define APDS990X_WTIME_DEFAULT 0xee /* ~50ms wait time */
|
|
|
|
#define APDS990X_TIME_TO_ADC 1024 /* One timetick as ADC count value */
|
|
|
|
/* Persistence */
|
|
#define APDS990X_APERS_SHIFT 0
|
|
#define APDS990X_PPERS_SHIFT 4
|
|
|
|
/* Supported ID:s */
|
|
#define APDS990X_ID_0 0x0
|
|
#define APDS990X_ID_4 0x4
|
|
#define APDS990X_ID_29 0x29
|
|
|
|
/* pgain and pdiode settings */
|
|
#define APDS_PGAIN_1X 0x0
|
|
#define APDS_PDIODE_IR 0x2
|
|
|
|
#define APDS990X_LUX_OUTPUT_SCALE 10
|
|
|
|
/* Reverse chip factors for threshold calculation */
|
|
struct reverse_factors {
|
|
u32 afactor;
|
|
int cf1;
|
|
int irf1;
|
|
int cf2;
|
|
int irf2;
|
|
};
|
|
|
|
struct apds990x_chip {
|
|
struct apds990x_platform_data *pdata;
|
|
struct i2c_client *client;
|
|
struct mutex mutex; /* avoid parallel access */
|
|
struct regulator_bulk_data regs[2];
|
|
wait_queue_head_t wait;
|
|
|
|
int prox_en;
|
|
bool prox_continuous_mode;
|
|
bool lux_wait_fresh_res;
|
|
|
|
/* Chip parameters */
|
|
struct apds990x_chip_factors cf;
|
|
struct reverse_factors rcf;
|
|
u16 atime; /* als integration time */
|
|
u16 arate; /* als reporting rate */
|
|
u16 a_max_result; /* Max possible ADC value with current atime */
|
|
u8 again_meas; /* Gain used in last measurement */
|
|
u8 again_next; /* Next calculated gain */
|
|
u8 pgain;
|
|
u8 pdiode;
|
|
u8 pdrive;
|
|
u8 lux_persistence;
|
|
u8 prox_persistence;
|
|
|
|
u32 lux_raw;
|
|
u32 lux;
|
|
u16 lux_clear;
|
|
u16 lux_ir;
|
|
u16 lux_calib;
|
|
u32 lux_thres_hi;
|
|
u32 lux_thres_lo;
|
|
|
|
u32 prox_thres;
|
|
u16 prox_data;
|
|
u16 prox_calib;
|
|
|
|
char chipname[10];
|
|
u8 revision;
|
|
};
|
|
|
|
#define APDS_CALIB_SCALER 8192
|
|
#define APDS_LUX_NEUTRAL_CALIB_VALUE (1 * APDS_CALIB_SCALER)
|
|
#define APDS_PROX_NEUTRAL_CALIB_VALUE (1 * APDS_CALIB_SCALER)
|
|
|
|
#define APDS_PROX_DEF_THRES 600
|
|
#define APDS_PROX_HYSTERESIS 50
|
|
#define APDS_LUX_DEF_THRES_HI 101
|
|
#define APDS_LUX_DEF_THRES_LO 100
|
|
#define APDS_DEFAULT_PROX_PERS 1
|
|
|
|
#define APDS_TIMEOUT 2000
|
|
#define APDS_STARTUP_DELAY 25000 /* us */
|
|
#define APDS_RANGE 65535
|
|
#define APDS_PROX_RANGE 1023
|
|
#define APDS_LUX_GAIN_LO_LIMIT 100
|
|
#define APDS_LUX_GAIN_LO_LIMIT_STRICT 25
|
|
|
|
#define TIMESTEP 87 /* 2.7ms is about 87 / 32 */
|
|
#define TIME_STEP_SCALER 32
|
|
|
|
#define APDS_LUX_AVERAGING_TIME 50 /* tolerates 50/60Hz ripple */
|
|
#define APDS_LUX_DEFAULT_RATE 200
|
|
|
|
static const u8 again[] = {1, 8, 16, 120}; /* ALS gain steps */
|
|
|
|
/* Following two tables must match i.e 10Hz rate means 1 as persistence value */
|
|
static const u16 arates_hz[] = {10, 5, 2, 1};
|
|
static const u8 apersis[] = {1, 2, 4, 5};
|
|
|
|
/* Regulators */
|
|
static const char reg_vcc[] = "Vdd";
|
|
static const char reg_vled[] = "Vled";
|
|
|
|
static int apds990x_read_byte(struct apds990x_chip *chip, u8 reg, u8 *data)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
s32 ret;
|
|
|
|
reg &= ~APDS990x_CMD_TYPE_MASK;
|
|
reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, reg);
|
|
*data = ret;
|
|
return (int)ret;
|
|
}
|
|
|
|
static int apds990x_read_word(struct apds990x_chip *chip, u8 reg, u16 *data)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
s32 ret;
|
|
|
|
reg &= ~APDS990x_CMD_TYPE_MASK;
|
|
reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC;
|
|
|
|
ret = i2c_smbus_read_word_data(client, reg);
|
|
*data = ret;
|
|
return (int)ret;
|
|
}
|
|
|
|
static int apds990x_write_byte(struct apds990x_chip *chip, u8 reg, u8 data)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
s32 ret;
|
|
|
|
reg &= ~APDS990x_CMD_TYPE_MASK;
|
|
reg |= APDS990x_CMD | APDS990x_CMD_TYPE_RB;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, reg, data);
|
|
return (int)ret;
|
|
}
|
|
|
|
static int apds990x_write_word(struct apds990x_chip *chip, u8 reg, u16 data)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
s32 ret;
|
|
|
|
reg &= ~APDS990x_CMD_TYPE_MASK;
|
|
reg |= APDS990x_CMD | APDS990x_CMD_TYPE_INC;
|
|
|
|
ret = i2c_smbus_write_word_data(client, reg, data);
|
|
return (int)ret;
|
|
}
|
|
|
|
static int apds990x_mode_on(struct apds990x_chip *chip)
|
|
{
|
|
/* ALS is mandatory, proximity optional */
|
|
u8 reg = APDS990X_EN_AIEN | APDS990X_EN_PON | APDS990X_EN_AEN |
|
|
APDS990X_EN_WEN;
|
|
|
|
if (chip->prox_en)
|
|
reg |= APDS990X_EN_PIEN | APDS990X_EN_PEN;
|
|
|
|
return apds990x_write_byte(chip, APDS990X_ENABLE, reg);
|
|
}
|
|
|
|
static u16 apds990x_lux_to_threshold(struct apds990x_chip *chip, u32 lux)
|
|
{
|
|
u32 thres;
|
|
u32 cpl;
|
|
u32 ir;
|
|
|
|
if (lux == 0)
|
|
return 0;
|
|
else if (lux == APDS_RANGE)
|
|
return APDS_RANGE;
|
|
|
|
/*
|
|
* Reported LUX value is a combination of the IR and CLEAR channel
|
|
* values. However, interrupt threshold is only for clear channel.
|
|
* This function approximates needed HW threshold value for a given
|
|
* LUX value in the current lightning type.
|
|
* IR level compared to visible light varies heavily depending on the
|
|
* source of the light
|
|
*
|
|
* Calculate threshold value for the next measurement period.
|
|
* Math: threshold = lux * cpl where
|
|
* cpl = atime * again / (glass_attenuation * device_factor)
|
|
* (count-per-lux)
|
|
*
|
|
* First remove calibration. Division by four is to avoid overflow
|
|
*/
|
|
lux = lux * (APDS_CALIB_SCALER / 4) / (chip->lux_calib / 4);
|
|
|
|
/* Multiplication by 64 is to increase accuracy */
|
|
cpl = ((u32)chip->atime * (u32)again[chip->again_next] *
|
|
APDS_PARAM_SCALE * 64) / (chip->cf.ga * chip->cf.df);
|
|
|
|
thres = lux * cpl / 64;
|
|
/*
|
|
* Convert IR light from the latest result to match with
|
|
* new gain step. This helps to adapt with the current
|
|
* source of light.
|
|
*/
|
|
ir = (u32)chip->lux_ir * (u32)again[chip->again_next] /
|
|
(u32)again[chip->again_meas];
|
|
|
|
/*
|
|
* Compensate count with IR light impact
|
|
* IAC1 > IAC2 (see apds990x_get_lux for formulas)
|
|
*/
|
|
if (chip->lux_clear * APDS_PARAM_SCALE >=
|
|
chip->rcf.afactor * chip->lux_ir)
|
|
thres = (chip->rcf.cf1 * thres + chip->rcf.irf1 * ir) /
|
|
APDS_PARAM_SCALE;
|
|
else
|
|
thres = (chip->rcf.cf2 * thres + chip->rcf.irf2 * ir) /
|
|
APDS_PARAM_SCALE;
|
|
|
|
if (thres >= chip->a_max_result)
|
|
thres = chip->a_max_result - 1;
|
|
return thres;
|
|
}
|
|
|
|
static inline int apds990x_set_atime(struct apds990x_chip *chip, u32 time_ms)
|
|
{
|
|
u8 reg_value;
|
|
|
|
chip->atime = time_ms;
|
|
/* Formula is specified in the data sheet */
|
|
reg_value = 256 - ((time_ms * TIME_STEP_SCALER) / TIMESTEP);
|
|
/* Calculate max ADC value for given integration time */
|
|
chip->a_max_result = (u16)(256 - reg_value) * APDS990X_TIME_TO_ADC;
|
|
return apds990x_write_byte(chip, APDS990X_ATIME, reg_value);
|
|
}
|
|
|
|
/* Called always with mutex locked */
|
|
static int apds990x_refresh_pthres(struct apds990x_chip *chip, int data)
|
|
{
|
|
int ret, lo, hi;
|
|
|
|
/* If the chip is not in use, don't try to access it */
|
|
if (pm_runtime_suspended(&chip->client->dev))
|
|
return 0;
|
|
|
|
if (data < chip->prox_thres) {
|
|
lo = 0;
|
|
hi = chip->prox_thres;
|
|
} else {
|
|
lo = chip->prox_thres - APDS_PROX_HYSTERESIS;
|
|
if (chip->prox_continuous_mode)
|
|
hi = chip->prox_thres;
|
|
else
|
|
hi = APDS_RANGE;
|
|
}
|
|
|
|
ret = apds990x_write_word(chip, APDS990X_PILTL, lo);
|
|
ret |= apds990x_write_word(chip, APDS990X_PIHTL, hi);
|
|
return ret;
|
|
}
|
|
|
|
/* Called always with mutex locked */
|
|
static int apds990x_refresh_athres(struct apds990x_chip *chip)
|
|
{
|
|
int ret;
|
|
/* If the chip is not in use, don't try to access it */
|
|
if (pm_runtime_suspended(&chip->client->dev))
|
|
return 0;
|
|
|
|
ret = apds990x_write_word(chip, APDS990X_AILTL,
|
|
apds990x_lux_to_threshold(chip, chip->lux_thres_lo));
|
|
ret |= apds990x_write_word(chip, APDS990X_AIHTL,
|
|
apds990x_lux_to_threshold(chip, chip->lux_thres_hi));
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Called always with mutex locked */
|
|
static void apds990x_force_a_refresh(struct apds990x_chip *chip)
|
|
{
|
|
/* This will force ALS interrupt after the next measurement. */
|
|
apds990x_write_word(chip, APDS990X_AILTL, APDS_LUX_DEF_THRES_LO);
|
|
apds990x_write_word(chip, APDS990X_AIHTL, APDS_LUX_DEF_THRES_HI);
|
|
}
|
|
|
|
/* Called always with mutex locked */
|
|
static void apds990x_force_p_refresh(struct apds990x_chip *chip)
|
|
{
|
|
/* This will force proximity interrupt after the next measurement. */
|
|
apds990x_write_word(chip, APDS990X_PILTL, APDS_PROX_DEF_THRES - 1);
|
|
apds990x_write_word(chip, APDS990X_PIHTL, APDS_PROX_DEF_THRES);
|
|
}
|
|
|
|
/* Called always with mutex locked */
|
|
static int apds990x_calc_again(struct apds990x_chip *chip)
|
|
{
|
|
int curr_again = chip->again_meas;
|
|
int next_again = chip->again_meas;
|
|
int ret = 0;
|
|
|
|
/* Calculate suitable als gain */
|
|
if (chip->lux_clear == chip->a_max_result)
|
|
next_again -= 2; /* ALS saturated. Decrease gain by 2 steps */
|
|
else if (chip->lux_clear > chip->a_max_result / 2)
|
|
next_again--;
|
|
else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT)
|
|
next_again += 2; /* Too dark. Increase gain by 2 steps */
|
|
else if (chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT)
|
|
next_again++;
|
|
|
|
/* Limit gain to available range */
|
|
if (next_again < 0)
|
|
next_again = 0;
|
|
else if (next_again > APDS990X_MAX_AGAIN)
|
|
next_again = APDS990X_MAX_AGAIN;
|
|
|
|
/* Let's check can we trust the measured result */
|
|
if (chip->lux_clear == chip->a_max_result)
|
|
/* Result can be totally garbage due to saturation */
|
|
ret = -ERANGE;
|
|
else if (next_again != curr_again &&
|
|
chip->lux_clear < APDS_LUX_GAIN_LO_LIMIT_STRICT)
|
|
/*
|
|
* Gain is changed and measurement result is very small.
|
|
* Result can be totally garbage due to underflow
|
|
*/
|
|
ret = -ERANGE;
|
|
|
|
chip->again_next = next_again;
|
|
apds990x_write_byte(chip, APDS990X_CONTROL,
|
|
(chip->pdrive << 6) |
|
|
(chip->pdiode << 4) |
|
|
(chip->pgain << 2) |
|
|
(chip->again_next << 0));
|
|
|
|
/*
|
|
* Error means bad result -> re-measurement is needed. The forced
|
|
* refresh uses fastest possible persistence setting to get result
|
|
* as soon as possible.
|
|
*/
|
|
if (ret < 0)
|
|
apds990x_force_a_refresh(chip);
|
|
else
|
|
apds990x_refresh_athres(chip);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Called always with mutex locked */
|
|
static int apds990x_get_lux(struct apds990x_chip *chip, int clear, int ir)
|
|
{
|
|
int iac, iac1, iac2; /* IR adjusted counts */
|
|
u32 lpc; /* Lux per count */
|
|
|
|
/* Formulas:
|
|
* iac1 = CF1 * CLEAR_CH - IRF1 * IR_CH
|
|
* iac2 = CF2 * CLEAR_CH - IRF2 * IR_CH
|
|
*/
|
|
iac1 = (chip->cf.cf1 * clear - chip->cf.irf1 * ir) / APDS_PARAM_SCALE;
|
|
iac2 = (chip->cf.cf2 * clear - chip->cf.irf2 * ir) / APDS_PARAM_SCALE;
|
|
|
|
iac = max(iac1, iac2);
|
|
iac = max(iac, 0);
|
|
|
|
lpc = APDS990X_LUX_OUTPUT_SCALE * (chip->cf.df * chip->cf.ga) /
|
|
(u32)(again[chip->again_meas] * (u32)chip->atime);
|
|
|
|
return (iac * lpc) / APDS_PARAM_SCALE;
|
|
}
|
|
|
|
static int apds990x_ack_int(struct apds990x_chip *chip, u8 mode)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
s32 ret;
|
|
u8 reg = APDS990x_CMD | APDS990x_CMD_TYPE_SPE;
|
|
|
|
switch (mode & (APDS990X_ST_AINT | APDS990X_ST_PINT)) {
|
|
case APDS990X_ST_AINT:
|
|
reg |= APDS990X_INT_ACK_ALS;
|
|
break;
|
|
case APDS990X_ST_PINT:
|
|
reg |= APDS990X_INT_ACK_PS;
|
|
break;
|
|
default:
|
|
reg |= APDS990X_INT_ACK_BOTH;
|
|
break;
|
|
}
|
|
|
|
ret = i2c_smbus_read_byte_data(client, reg);
|
|
return (int)ret;
|
|
}
|
|
|
|
static irqreturn_t apds990x_irq(int irq, void *data)
|
|
{
|
|
struct apds990x_chip *chip = data;
|
|
u8 status;
|
|
|
|
apds990x_read_byte(chip, APDS990X_STATUS, &status);
|
|
apds990x_ack_int(chip, status);
|
|
|
|
mutex_lock(&chip->mutex);
|
|
if (!pm_runtime_suspended(&chip->client->dev)) {
|
|
if (status & APDS990X_ST_AINT) {
|
|
apds990x_read_word(chip, APDS990X_CDATAL,
|
|
&chip->lux_clear);
|
|
apds990x_read_word(chip, APDS990X_IRDATAL,
|
|
&chip->lux_ir);
|
|
/* Store used gain for calculations */
|
|
chip->again_meas = chip->again_next;
|
|
|
|
chip->lux_raw = apds990x_get_lux(chip,
|
|
chip->lux_clear,
|
|
chip->lux_ir);
|
|
|
|
if (apds990x_calc_again(chip) == 0) {
|
|
/* Result is valid */
|
|
chip->lux = chip->lux_raw;
|
|
chip->lux_wait_fresh_res = false;
|
|
wake_up(&chip->wait);
|
|
sysfs_notify(&chip->client->dev.kobj,
|
|
NULL, "lux0_input");
|
|
}
|
|
}
|
|
|
|
if ((status & APDS990X_ST_PINT) && chip->prox_en) {
|
|
u16 clr_ch;
|
|
|
|
apds990x_read_word(chip, APDS990X_CDATAL, &clr_ch);
|
|
/*
|
|
* If ALS channel is saturated at min gain,
|
|
* proximity gives false posivite values.
|
|
* Just ignore them.
|
|
*/
|
|
if (chip->again_meas == 0 &&
|
|
clr_ch == chip->a_max_result)
|
|
chip->prox_data = 0;
|
|
else
|
|
apds990x_read_word(chip,
|
|
APDS990X_PDATAL,
|
|
&chip->prox_data);
|
|
|
|
apds990x_refresh_pthres(chip, chip->prox_data);
|
|
if (chip->prox_data < chip->prox_thres)
|
|
chip->prox_data = 0;
|
|
else if (!chip->prox_continuous_mode)
|
|
chip->prox_data = APDS_PROX_RANGE;
|
|
sysfs_notify(&chip->client->dev.kobj,
|
|
NULL, "prox0_raw");
|
|
}
|
|
}
|
|
mutex_unlock(&chip->mutex);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int apds990x_configure(struct apds990x_chip *chip)
|
|
{
|
|
/* It is recommended to use disabled mode during these operations */
|
|
apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL);
|
|
|
|
/* conversion and wait times for different state machince states */
|
|
apds990x_write_byte(chip, APDS990X_PTIME, APDS990X_PTIME_DEFAULT);
|
|
apds990x_write_byte(chip, APDS990X_WTIME, APDS990X_WTIME_DEFAULT);
|
|
apds990x_set_atime(chip, APDS_LUX_AVERAGING_TIME);
|
|
|
|
apds990x_write_byte(chip, APDS990X_CONFIG, 0);
|
|
|
|
/* Persistence levels */
|
|
apds990x_write_byte(chip, APDS990X_PERS,
|
|
(chip->lux_persistence << APDS990X_APERS_SHIFT) |
|
|
(chip->prox_persistence << APDS990X_PPERS_SHIFT));
|
|
|
|
apds990x_write_byte(chip, APDS990X_PPCOUNT, chip->pdata->ppcount);
|
|
|
|
/* Start with relatively small gain */
|
|
chip->again_meas = 1;
|
|
chip->again_next = 1;
|
|
apds990x_write_byte(chip, APDS990X_CONTROL,
|
|
(chip->pdrive << 6) |
|
|
(chip->pdiode << 4) |
|
|
(chip->pgain << 2) |
|
|
(chip->again_next << 0));
|
|
return 0;
|
|
}
|
|
|
|
static int apds990x_detect(struct apds990x_chip *chip)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
int ret;
|
|
u8 id;
|
|
|
|
ret = apds990x_read_byte(chip, APDS990X_ID, &id);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "ID read failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = apds990x_read_byte(chip, APDS990X_REV, &chip->revision);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "REV read failed\n");
|
|
return ret;
|
|
}
|
|
|
|
switch (id) {
|
|
case APDS990X_ID_0:
|
|
case APDS990X_ID_4:
|
|
case APDS990X_ID_29:
|
|
snprintf(chip->chipname, sizeof(chip->chipname), "APDS-990x");
|
|
break;
|
|
default:
|
|
ret = -ENODEV;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int apds990x_chip_on(struct apds990x_chip *chip)
|
|
{
|
|
int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
|
|
chip->regs);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY);
|
|
|
|
/* Refresh all configs in case of regulators were off */
|
|
chip->prox_data = 0;
|
|
apds990x_configure(chip);
|
|
apds990x_mode_on(chip);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int apds990x_chip_off(struct apds990x_chip *chip)
|
|
{
|
|
apds990x_write_byte(chip, APDS990X_ENABLE, APDS990X_EN_DISABLE_ALL);
|
|
regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t apds990x_lux_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
ssize_t ret;
|
|
u32 result;
|
|
long timeout;
|
|
|
|
if (pm_runtime_suspended(dev))
|
|
return -EIO;
|
|
|
|
timeout = wait_event_interruptible_timeout(chip->wait,
|
|
!chip->lux_wait_fresh_res,
|
|
msecs_to_jiffies(APDS_TIMEOUT));
|
|
if (!timeout)
|
|
return -EIO;
|
|
|
|
mutex_lock(&chip->mutex);
|
|
result = (chip->lux * chip->lux_calib) / APDS_CALIB_SCALER;
|
|
if (result > (APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE))
|
|
result = APDS_RANGE * APDS990X_LUX_OUTPUT_SCALE;
|
|
|
|
ret = sprintf(buf, "%d.%d\n",
|
|
result / APDS990X_LUX_OUTPUT_SCALE,
|
|
result % APDS990X_LUX_OUTPUT_SCALE);
|
|
mutex_unlock(&chip->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static DEVICE_ATTR(lux0_input, S_IRUGO, apds990x_lux_show, NULL);
|
|
|
|
static ssize_t apds990x_lux_range_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", APDS_RANGE);
|
|
}
|
|
|
|
static DEVICE_ATTR(lux0_sensor_range, S_IRUGO, apds990x_lux_range_show, NULL);
|
|
|
|
static ssize_t apds990x_lux_calib_format_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", APDS_CALIB_SCALER);
|
|
}
|
|
|
|
static DEVICE_ATTR(lux0_calibscale_default, S_IRUGO,
|
|
apds990x_lux_calib_format_show, NULL);
|
|
|
|
static ssize_t apds990x_lux_calib_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%u\n", chip->lux_calib);
|
|
}
|
|
|
|
static ssize_t apds990x_lux_calib_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
unsigned long value;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
chip->lux_calib = value;
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(lux0_calibscale, S_IRUGO | S_IWUSR, apds990x_lux_calib_show,
|
|
apds990x_lux_calib_store);
|
|
|
|
static ssize_t apds990x_rate_avail(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int i;
|
|
int pos = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(arates_hz); i++)
|
|
pos += sprintf(buf + pos, "%d ", arates_hz[i]);
|
|
sprintf(buf + pos - 1, "\n");
|
|
return pos;
|
|
}
|
|
|
|
static ssize_t apds990x_rate_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", chip->arate);
|
|
}
|
|
|
|
static int apds990x_set_arate(struct apds990x_chip *chip, int rate)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(arates_hz); i++)
|
|
if (rate >= arates_hz[i])
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(arates_hz))
|
|
return -EINVAL;
|
|
|
|
/* Pick up corresponding persistence value */
|
|
chip->lux_persistence = apersis[i];
|
|
chip->arate = arates_hz[i];
|
|
|
|
/* If the chip is not in use, don't try to access it */
|
|
if (pm_runtime_suspended(&chip->client->dev))
|
|
return 0;
|
|
|
|
/* Persistence levels */
|
|
return apds990x_write_byte(chip, APDS990X_PERS,
|
|
(chip->lux_persistence << APDS990X_APERS_SHIFT) |
|
|
(chip->prox_persistence << APDS990X_PPERS_SHIFT));
|
|
}
|
|
|
|
static ssize_t apds990x_rate_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
unsigned long value;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&chip->mutex);
|
|
ret = apds990x_set_arate(chip, value);
|
|
mutex_unlock(&chip->mutex);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(lux0_rate_avail, S_IRUGO, apds990x_rate_avail, NULL);
|
|
|
|
static DEVICE_ATTR(lux0_rate, S_IRUGO | S_IWUSR, apds990x_rate_show,
|
|
apds990x_rate_store);
|
|
|
|
static ssize_t apds990x_prox_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
ssize_t ret;
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
if (pm_runtime_suspended(dev) || !chip->prox_en)
|
|
return -EIO;
|
|
|
|
mutex_lock(&chip->mutex);
|
|
ret = sprintf(buf, "%d\n", chip->prox_data);
|
|
mutex_unlock(&chip->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static DEVICE_ATTR(prox0_raw, S_IRUGO, apds990x_prox_show, NULL);
|
|
|
|
static ssize_t apds990x_prox_range_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", APDS_PROX_RANGE);
|
|
}
|
|
|
|
static DEVICE_ATTR(prox0_sensor_range, S_IRUGO, apds990x_prox_range_show, NULL);
|
|
|
|
static ssize_t apds990x_prox_enable_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", chip->prox_en);
|
|
}
|
|
|
|
static ssize_t apds990x_prox_enable_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
unsigned long value;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&chip->mutex);
|
|
|
|
if (!chip->prox_en)
|
|
chip->prox_data = 0;
|
|
|
|
if (value)
|
|
chip->prox_en++;
|
|
else if (chip->prox_en > 0)
|
|
chip->prox_en--;
|
|
|
|
if (!pm_runtime_suspended(dev))
|
|
apds990x_mode_on(chip);
|
|
mutex_unlock(&chip->mutex);
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(prox0_raw_en, S_IRUGO | S_IWUSR, apds990x_prox_enable_show,
|
|
apds990x_prox_enable_store);
|
|
|
|
static const char *reporting_modes[] = {"trigger", "periodic"};
|
|
|
|
static ssize_t apds990x_prox_reporting_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s\n",
|
|
reporting_modes[!!chip->prox_continuous_mode]);
|
|
}
|
|
|
|
static ssize_t apds990x_prox_reporting_mode_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = sysfs_match_string(reporting_modes, buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
chip->prox_continuous_mode = ret;
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(prox0_reporting_mode, S_IRUGO | S_IWUSR,
|
|
apds990x_prox_reporting_mode_show,
|
|
apds990x_prox_reporting_mode_store);
|
|
|
|
static ssize_t apds990x_prox_reporting_avail_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%s %s\n", reporting_modes[0], reporting_modes[1]);
|
|
}
|
|
|
|
static DEVICE_ATTR(prox0_reporting_mode_avail, S_IRUGO | S_IWUSR,
|
|
apds990x_prox_reporting_avail_show, NULL);
|
|
|
|
|
|
static ssize_t apds990x_lux_thresh_above_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", chip->lux_thres_hi);
|
|
}
|
|
|
|
static ssize_t apds990x_lux_thresh_below_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", chip->lux_thres_lo);
|
|
}
|
|
|
|
static ssize_t apds990x_set_lux_thresh(struct apds990x_chip *chip, u32 *target,
|
|
const char *buf)
|
|
{
|
|
unsigned long thresh;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &thresh);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (thresh > APDS_RANGE)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&chip->mutex);
|
|
*target = thresh;
|
|
/*
|
|
* Don't update values in HW if we are still waiting for
|
|
* first interrupt to come after device handle open call.
|
|
*/
|
|
if (!chip->lux_wait_fresh_res)
|
|
apds990x_refresh_athres(chip);
|
|
mutex_unlock(&chip->mutex);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static ssize_t apds990x_lux_thresh_above_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_hi, buf);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
return len;
|
|
}
|
|
|
|
static ssize_t apds990x_lux_thresh_below_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_lo, buf);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(lux0_thresh_above_value, S_IRUGO | S_IWUSR,
|
|
apds990x_lux_thresh_above_show,
|
|
apds990x_lux_thresh_above_store);
|
|
|
|
static DEVICE_ATTR(lux0_thresh_below_value, S_IRUGO | S_IWUSR,
|
|
apds990x_lux_thresh_below_show,
|
|
apds990x_lux_thresh_below_store);
|
|
|
|
static ssize_t apds990x_prox_threshold_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", chip->prox_thres);
|
|
}
|
|
|
|
static ssize_t apds990x_prox_threshold_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
unsigned long value;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((value > APDS_RANGE) || (value == 0) ||
|
|
(value < APDS_PROX_HYSTERESIS))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&chip->mutex);
|
|
chip->prox_thres = value;
|
|
|
|
apds990x_force_p_refresh(chip);
|
|
mutex_unlock(&chip->mutex);
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(prox0_thresh_above_value, S_IRUGO | S_IWUSR,
|
|
apds990x_prox_threshold_show,
|
|
apds990x_prox_threshold_store);
|
|
|
|
static ssize_t apds990x_power_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%d\n", !pm_runtime_suspended(dev));
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t apds990x_power_state_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
unsigned long value;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (value) {
|
|
pm_runtime_get_sync(dev);
|
|
mutex_lock(&chip->mutex);
|
|
chip->lux_wait_fresh_res = true;
|
|
apds990x_force_a_refresh(chip);
|
|
apds990x_force_p_refresh(chip);
|
|
mutex_unlock(&chip->mutex);
|
|
} else {
|
|
if (!pm_runtime_suspended(dev))
|
|
pm_runtime_put(dev);
|
|
}
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
|
|
apds990x_power_state_show,
|
|
apds990x_power_state_store);
|
|
|
|
static ssize_t apds990x_chip_id_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct apds990x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s %d\n", chip->chipname, chip->revision);
|
|
}
|
|
|
|
static DEVICE_ATTR(chip_id, S_IRUGO, apds990x_chip_id_show, NULL);
|
|
|
|
static struct attribute *sysfs_attrs_ctrl[] = {
|
|
&dev_attr_lux0_calibscale.attr,
|
|
&dev_attr_lux0_calibscale_default.attr,
|
|
&dev_attr_lux0_input.attr,
|
|
&dev_attr_lux0_sensor_range.attr,
|
|
&dev_attr_lux0_rate.attr,
|
|
&dev_attr_lux0_rate_avail.attr,
|
|
&dev_attr_lux0_thresh_above_value.attr,
|
|
&dev_attr_lux0_thresh_below_value.attr,
|
|
&dev_attr_prox0_raw_en.attr,
|
|
&dev_attr_prox0_raw.attr,
|
|
&dev_attr_prox0_sensor_range.attr,
|
|
&dev_attr_prox0_thresh_above_value.attr,
|
|
&dev_attr_prox0_reporting_mode.attr,
|
|
&dev_attr_prox0_reporting_mode_avail.attr,
|
|
&dev_attr_chip_id.attr,
|
|
&dev_attr_power_state.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group apds990x_attribute_group[] = {
|
|
{.attrs = sysfs_attrs_ctrl },
|
|
};
|
|
|
|
static int apds990x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct apds990x_chip *chip;
|
|
int err;
|
|
|
|
chip = kzalloc(sizeof *chip, GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, chip);
|
|
chip->client = client;
|
|
|
|
init_waitqueue_head(&chip->wait);
|
|
mutex_init(&chip->mutex);
|
|
chip->pdata = client->dev.platform_data;
|
|
|
|
if (chip->pdata == NULL) {
|
|
dev_err(&client->dev, "platform data is mandatory\n");
|
|
err = -EINVAL;
|
|
goto fail1;
|
|
}
|
|
|
|
if (chip->pdata->cf.ga == 0) {
|
|
/* set uncovered sensor default parameters */
|
|
chip->cf.ga = 1966; /* 0.48 * APDS_PARAM_SCALE */
|
|
chip->cf.cf1 = 4096; /* 1.00 * APDS_PARAM_SCALE */
|
|
chip->cf.irf1 = 9134; /* 2.23 * APDS_PARAM_SCALE */
|
|
chip->cf.cf2 = 2867; /* 0.70 * APDS_PARAM_SCALE */
|
|
chip->cf.irf2 = 5816; /* 1.42 * APDS_PARAM_SCALE */
|
|
chip->cf.df = 52;
|
|
} else {
|
|
chip->cf = chip->pdata->cf;
|
|
}
|
|
|
|
/* precalculate inverse chip factors for threshold control */
|
|
chip->rcf.afactor =
|
|
(chip->cf.irf1 - chip->cf.irf2) * APDS_PARAM_SCALE /
|
|
(chip->cf.cf1 - chip->cf.cf2);
|
|
chip->rcf.cf1 = APDS_PARAM_SCALE * APDS_PARAM_SCALE /
|
|
chip->cf.cf1;
|
|
chip->rcf.irf1 = chip->cf.irf1 * APDS_PARAM_SCALE /
|
|
chip->cf.cf1;
|
|
chip->rcf.cf2 = APDS_PARAM_SCALE * APDS_PARAM_SCALE /
|
|
chip->cf.cf2;
|
|
chip->rcf.irf2 = chip->cf.irf2 * APDS_PARAM_SCALE /
|
|
chip->cf.cf2;
|
|
|
|
/* Set something to start with */
|
|
chip->lux_thres_hi = APDS_LUX_DEF_THRES_HI;
|
|
chip->lux_thres_lo = APDS_LUX_DEF_THRES_LO;
|
|
chip->lux_calib = APDS_LUX_NEUTRAL_CALIB_VALUE;
|
|
|
|
chip->prox_thres = APDS_PROX_DEF_THRES;
|
|
chip->pdrive = chip->pdata->pdrive;
|
|
chip->pdiode = APDS_PDIODE_IR;
|
|
chip->pgain = APDS_PGAIN_1X;
|
|
chip->prox_calib = APDS_PROX_NEUTRAL_CALIB_VALUE;
|
|
chip->prox_persistence = APDS_DEFAULT_PROX_PERS;
|
|
chip->prox_continuous_mode = false;
|
|
|
|
chip->regs[0].supply = reg_vcc;
|
|
chip->regs[1].supply = reg_vled;
|
|
|
|
err = regulator_bulk_get(&client->dev,
|
|
ARRAY_SIZE(chip->regs), chip->regs);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "Cannot get regulators\n");
|
|
goto fail1;
|
|
}
|
|
|
|
err = regulator_bulk_enable(ARRAY_SIZE(chip->regs), chip->regs);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "Cannot enable regulators\n");
|
|
goto fail2;
|
|
}
|
|
|
|
usleep_range(APDS_STARTUP_DELAY, 2 * APDS_STARTUP_DELAY);
|
|
|
|
err = apds990x_detect(chip);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "APDS990X not found\n");
|
|
goto fail3;
|
|
}
|
|
|
|
pm_runtime_set_active(&client->dev);
|
|
|
|
apds990x_configure(chip);
|
|
apds990x_set_arate(chip, APDS_LUX_DEFAULT_RATE);
|
|
apds990x_mode_on(chip);
|
|
|
|
pm_runtime_enable(&client->dev);
|
|
|
|
if (chip->pdata->setup_resources) {
|
|
err = chip->pdata->setup_resources();
|
|
if (err) {
|
|
err = -EINVAL;
|
|
goto fail3;
|
|
}
|
|
}
|
|
|
|
err = sysfs_create_group(&chip->client->dev.kobj,
|
|
apds990x_attribute_group);
|
|
if (err < 0) {
|
|
dev_err(&chip->client->dev, "Sysfs registration failed\n");
|
|
goto fail4;
|
|
}
|
|
|
|
err = request_threaded_irq(client->irq, NULL,
|
|
apds990x_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW |
|
|
IRQF_ONESHOT,
|
|
"apds990x", chip);
|
|
if (err) {
|
|
dev_err(&client->dev, "could not get IRQ %d\n",
|
|
client->irq);
|
|
goto fail5;
|
|
}
|
|
return err;
|
|
fail5:
|
|
sysfs_remove_group(&chip->client->dev.kobj,
|
|
&apds990x_attribute_group[0]);
|
|
fail4:
|
|
if (chip->pdata && chip->pdata->release_resources)
|
|
chip->pdata->release_resources();
|
|
fail3:
|
|
regulator_bulk_disable(ARRAY_SIZE(chip->regs), chip->regs);
|
|
fail2:
|
|
regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
|
|
fail1:
|
|
kfree(chip);
|
|
return err;
|
|
}
|
|
|
|
static int apds990x_remove(struct i2c_client *client)
|
|
{
|
|
struct apds990x_chip *chip = i2c_get_clientdata(client);
|
|
|
|
free_irq(client->irq, chip);
|
|
sysfs_remove_group(&chip->client->dev.kobj,
|
|
apds990x_attribute_group);
|
|
|
|
if (chip->pdata && chip->pdata->release_resources)
|
|
chip->pdata->release_resources();
|
|
|
|
if (!pm_runtime_suspended(&client->dev))
|
|
apds990x_chip_off(chip);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
regulator_bulk_free(ARRAY_SIZE(chip->regs), chip->regs);
|
|
|
|
kfree(chip);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int apds990x_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct apds990x_chip *chip = i2c_get_clientdata(client);
|
|
|
|
apds990x_chip_off(chip);
|
|
return 0;
|
|
}
|
|
|
|
static int apds990x_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct apds990x_chip *chip = i2c_get_clientdata(client);
|
|
|
|
/*
|
|
* If we were enabled at suspend time, it is expected
|
|
* everything works nice and smoothly. Chip_on is enough
|
|
*/
|
|
apds990x_chip_on(chip);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static int apds990x_runtime_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct apds990x_chip *chip = i2c_get_clientdata(client);
|
|
|
|
apds990x_chip_off(chip);
|
|
return 0;
|
|
}
|
|
|
|
static int apds990x_runtime_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct apds990x_chip *chip = i2c_get_clientdata(client);
|
|
|
|
apds990x_chip_on(chip);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static const struct i2c_device_id apds990x_id[] = {
|
|
{"apds990x", 0 },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, apds990x_id);
|
|
|
|
static const struct dev_pm_ops apds990x_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(apds990x_suspend, apds990x_resume)
|
|
SET_RUNTIME_PM_OPS(apds990x_runtime_suspend,
|
|
apds990x_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static struct i2c_driver apds990x_driver = {
|
|
.driver = {
|
|
.name = "apds990x",
|
|
.pm = &apds990x_pm_ops,
|
|
},
|
|
.probe = apds990x_probe,
|
|
.remove = apds990x_remove,
|
|
.id_table = apds990x_id,
|
|
};
|
|
|
|
module_i2c_driver(apds990x_driver);
|
|
|
|
MODULE_DESCRIPTION("APDS990X combined ALS and proximity sensor");
|
|
MODULE_AUTHOR("Samu Onkalo, Nokia Corporation");
|
|
MODULE_LICENSE("GPL v2");
|