mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 08:34:20 +08:00
b86ff9820f
Android allows user space to manipulate wakelocks using two sysfs file located in /sys/power/, wake_lock and wake_unlock. Writing a wakelock name and optionally a timeout to the wake_lock file causes the wakelock whose name was written to be acquired (it is created before is necessary), optionally with the given timeout. Writing the name of a wakelock to wake_unlock causes that wakelock to be released. Implement an analogous interface for user space using wakeup sources. Add the /sys/power/wake_lock and /sys/power/wake_unlock files allowing user space to create, activate and deactivate wakeup sources, such that writing a name and optionally a timeout to wake_lock causes the wakeup source of that name to be activated, optionally with the given timeout. If that wakeup source doesn't exist, it will be created and then activated. Writing a name to wake_unlock causes the wakeup source of that name, if there is one, to be deactivated. Wakeup sources created with the help of wake_lock that haven't been used for more than 5 minutes are garbage collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT wakeup sources created with the help of wake_lock present at a time. The data type used to track wakeup sources created by user space is called "struct wakelock" to indicate the origins of this feature. This version of the patch includes an rbtree manipulation fix from John Stultz. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
234 lines
9.9 KiB
Plaintext
234 lines
9.9 KiB
Plaintext
What: /sys/power/
|
|
Date: August 2006
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power directory will contain files that will
|
|
provide a unified interface to the power management
|
|
subsystem.
|
|
|
|
What: /sys/power/state
|
|
Date: August 2006
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/state file controls the system power state.
|
|
Reading from this file returns what states are supported,
|
|
which is hard-coded to 'standby' (Power-On Suspend), 'mem'
|
|
(Suspend-to-RAM), and 'disk' (Suspend-to-Disk).
|
|
|
|
Writing to this file one of these strings causes the system to
|
|
transition into that state. Please see the file
|
|
Documentation/power/states.txt for a description of each of
|
|
these states.
|
|
|
|
What: /sys/power/disk
|
|
Date: September 2006
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/disk file controls the operating mode of the
|
|
suspend-to-disk mechanism. Reading from this file returns
|
|
the name of the method by which the system will be put to
|
|
sleep on the next suspend. There are four methods supported:
|
|
'firmware' - means that the memory image will be saved to disk
|
|
by some firmware, in which case we also assume that the
|
|
firmware will handle the system suspend.
|
|
'platform' - the memory image will be saved by the kernel and
|
|
the system will be put to sleep by the platform driver (e.g.
|
|
ACPI or other PM registers).
|
|
'shutdown' - the memory image will be saved by the kernel and
|
|
the system will be powered off.
|
|
'reboot' - the memory image will be saved by the kernel and
|
|
the system will be rebooted.
|
|
|
|
Additionally, /sys/power/disk can be used to turn on one of the
|
|
two testing modes of the suspend-to-disk mechanism: 'testproc'
|
|
or 'test'. If the suspend-to-disk mechanism is in the
|
|
'testproc' mode, writing 'disk' to /sys/power/state will cause
|
|
the kernel to disable nonboot CPUs and freeze tasks, wait for 5
|
|
seconds, unfreeze tasks and enable nonboot CPUs. If it is in
|
|
the 'test' mode, writing 'disk' to /sys/power/state will cause
|
|
the kernel to disable nonboot CPUs and freeze tasks, shrink
|
|
memory, suspend devices, wait for 5 seconds, resume devices,
|
|
unfreeze tasks and enable nonboot CPUs. Then, we are able to
|
|
look in the log messages and work out, for example, which code
|
|
is being slow and which device drivers are misbehaving.
|
|
|
|
The suspend-to-disk method may be chosen by writing to this
|
|
file one of the accepted strings:
|
|
|
|
'firmware'
|
|
'platform'
|
|
'shutdown'
|
|
'reboot'
|
|
'testproc'
|
|
'test'
|
|
|
|
It will only change to 'firmware' or 'platform' if the system
|
|
supports that.
|
|
|
|
What: /sys/power/image_size
|
|
Date: August 2006
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/image_size file controls the size of the image
|
|
created by the suspend-to-disk mechanism. It can be written a
|
|
string representing a non-negative integer that will be used
|
|
as an upper limit of the image size, in bytes. The kernel's
|
|
suspend-to-disk code will do its best to ensure the image size
|
|
will not exceed this number. However, if it turns out to be
|
|
impossible, the kernel will try to suspend anyway using the
|
|
smallest image possible. In particular, if "0" is written to
|
|
this file, the suspend image will be as small as possible.
|
|
|
|
Reading from this file will display the current image size
|
|
limit, which is set to 500 MB by default.
|
|
|
|
What: /sys/power/pm_trace
|
|
Date: August 2006
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/pm_trace file controls the code which saves the
|
|
last PM event point in the RTC across reboots, so that you can
|
|
debug a machine that just hangs during suspend (or more
|
|
commonly, during resume). Namely, the RTC is only used to save
|
|
the last PM event point if this file contains '1'. Initially
|
|
it contains '0' which may be changed to '1' by writing a
|
|
string representing a nonzero integer into it.
|
|
|
|
To use this debugging feature you should attempt to suspend
|
|
the machine, then reboot it and run
|
|
|
|
dmesg -s 1000000 | grep 'hash matches'
|
|
|
|
If you do not get any matches (or they appear to be false
|
|
positives), it is possible that the last PM event point
|
|
referred to a device created by a loadable kernel module. In
|
|
this case cat /sys/power/pm_trace_dev_match (see below) after
|
|
your system is started up and the kernel modules are loaded.
|
|
|
|
CAUTION: Using it will cause your machine's real-time (CMOS)
|
|
clock to be set to a random invalid time after a resume.
|
|
|
|
What; /sys/power/pm_trace_dev_match
|
|
Date: October 2010
|
|
Contact: James Hogan <james@albanarts.com>
|
|
Description:
|
|
The /sys/power/pm_trace_dev_match file contains the name of the
|
|
device associated with the last PM event point saved in the RTC
|
|
across reboots when pm_trace has been used. More precisely it
|
|
contains the list of current devices (including those
|
|
registered by loadable kernel modules since boot) which match
|
|
the device hash in the RTC at boot, with a newline after each
|
|
one.
|
|
|
|
The advantage of this file over the hash matches printed to the
|
|
kernel log (see /sys/power/pm_trace), is that it includes
|
|
devices created after boot by loadable kernel modules.
|
|
|
|
Due to the small hash size necessary to fit in the RTC, it is
|
|
possible that more than one device matches the hash, in which
|
|
case further investigation is required to determine which
|
|
device is causing the problem. Note that genuine RTC clock
|
|
values (such as when pm_trace has not been used), can still
|
|
match a device and output it's name here.
|
|
|
|
What: /sys/power/pm_async
|
|
Date: January 2009
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/pm_async file controls the switch allowing the
|
|
user space to enable or disable asynchronous suspend and resume
|
|
of devices. If enabled, this feature will cause some device
|
|
drivers' suspend and resume callbacks to be executed in parallel
|
|
with each other and with the main suspend thread. It is enabled
|
|
if this file contains "1", which is the default. It may be
|
|
disabled by writing "0" to this file, in which case all devices
|
|
will be suspended and resumed synchronously.
|
|
|
|
What: /sys/power/wakeup_count
|
|
Date: July 2010
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/wakeup_count file allows user space to put the
|
|
system into a sleep state while taking into account the
|
|
concurrent arrival of wakeup events. Reading from it returns
|
|
the current number of registered wakeup events and it blocks if
|
|
some wakeup events are being processed at the time the file is
|
|
read from. Writing to it will only succeed if the current
|
|
number of wakeup events is equal to the written value and, if
|
|
successful, will make the kernel abort a subsequent transition
|
|
to a sleep state if any wakeup events are reported after the
|
|
write has returned.
|
|
|
|
What: /sys/power/reserved_size
|
|
Date: May 2011
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/reserved_size file allows user space to control
|
|
the amount of memory reserved for allocations made by device
|
|
drivers during the "device freeze" stage of hibernation. It can
|
|
be written a string representing a non-negative integer that
|
|
will be used as the amount of memory to reserve for allocations
|
|
made by device drivers' "freeze" callbacks, in bytes.
|
|
|
|
Reading from this file will display the current value, which is
|
|
set to 1 MB by default.
|
|
|
|
What: /sys/power/autosleep
|
|
Date: April 2012
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/autosleep file can be written one of the strings
|
|
returned by reads from /sys/power/state. If that happens, a
|
|
work item attempting to trigger a transition of the system to
|
|
the sleep state represented by that string is queued up. This
|
|
attempt will only succeed if there are no active wakeup sources
|
|
in the system at that time. After every execution, regardless
|
|
of whether or not the attempt to put the system to sleep has
|
|
succeeded, the work item requeues itself until user space
|
|
writes "off" to /sys/power/autosleep.
|
|
|
|
Reading from this file causes the last string successfully
|
|
written to it to be returned.
|
|
|
|
What: /sys/power/wake_lock
|
|
Date: February 2012
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/wake_lock file allows user space to create
|
|
wakeup source objects and activate them on demand (if one of
|
|
those wakeup sources is active, reads from the
|
|
/sys/power/wakeup_count file block or return false). When a
|
|
string without white space is written to /sys/power/wake_lock,
|
|
it will be assumed to represent a wakeup source name. If there
|
|
is a wakeup source object with that name, it will be activated
|
|
(unless active already). Otherwise, a new wakeup source object
|
|
will be registered, assigned the given name and activated.
|
|
If a string written to /sys/power/wake_lock contains white
|
|
space, the part of the string preceding the white space will be
|
|
regarded as a wakeup source name and handled as descrived above.
|
|
The other part of the string will be regarded as a timeout (in
|
|
nanoseconds) such that the wakeup source will be automatically
|
|
deactivated after it has expired. The timeout, if present, is
|
|
set regardless of the current state of the wakeup source object
|
|
in question.
|
|
|
|
Reads from this file return a string consisting of the names of
|
|
wakeup sources created with the help of it that are active at
|
|
the moment, separated with spaces.
|
|
|
|
|
|
What: /sys/power/wake_unlock
|
|
Date: February 2012
|
|
Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Description:
|
|
The /sys/power/wake_unlock file allows user space to deactivate
|
|
wakeup sources created with the help of /sys/power/wake_lock.
|
|
When a string is written to /sys/power/wake_unlock, it will be
|
|
assumed to represent the name of a wakeup source to deactivate.
|
|
If a wakeup source object of that name exists and is active at
|
|
the moment, it will be deactivated.
|
|
|
|
Reads from this file return a string consisting of the names of
|
|
wakeup sources created with the help of /sys/power/wake_lock
|
|
that are inactive at the moment, separated with spaces.
|