mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
33776d0596
Depending on the capabilities of the PCI controller/platform, the
PCI-to-PCI bridge emulation behavior might need to be different. For
example, on platforms that use the pci-mvebu code, we currently don't
support prefetchable memory BARs, so the corresponding fields in the
PCI-to-PCI bridge configuration space should be read-only.
To implement this, extend pci_bridge_emul_init() to take a "flags"
argument, with currently one flag supported:
PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR
that will make the prefetchable memory base and limit registers
read-only.
The pci-mvebu and pci-aardvark drivers are updated accordingly.
Fixes: 1f08673eef
("PCI: mvebu: Convert to PCI emulated bridge config space")
Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
Reported-by: Leigh Brown <leigh@solinno.co.uk>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Tested-by: Luis Mendes <luis.p.mendes@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Cc: Luís Mendes <luis.p.mendes@gmail.com>
Cc: Leigh Brown <leigh@solinno.co.uk>
1157 lines
29 KiB
C
1157 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCIe driver for Marvell Armada 370 and Armada XP SoCs
|
|
*
|
|
* Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include "../pci.h"
|
|
#include "../pci-bridge-emul.h"
|
|
|
|
/*
|
|
* PCIe unit register offsets.
|
|
*/
|
|
#define PCIE_DEV_ID_OFF 0x0000
|
|
#define PCIE_CMD_OFF 0x0004
|
|
#define PCIE_DEV_REV_OFF 0x0008
|
|
#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
|
|
#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
|
|
#define PCIE_CAP_PCIEXP 0x0060
|
|
#define PCIE_HEADER_LOG_4_OFF 0x0128
|
|
#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
|
|
#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
|
|
#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
|
|
#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
|
|
#define PCIE_WIN5_CTRL_OFF 0x1880
|
|
#define PCIE_WIN5_BASE_OFF 0x1884
|
|
#define PCIE_WIN5_REMAP_OFF 0x188c
|
|
#define PCIE_CONF_ADDR_OFF 0x18f8
|
|
#define PCIE_CONF_ADDR_EN 0x80000000
|
|
#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
|
|
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
|
|
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
|
|
#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
|
|
#define PCIE_CONF_ADDR(bus, devfn, where) \
|
|
(PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
|
|
PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
|
|
PCIE_CONF_ADDR_EN)
|
|
#define PCIE_CONF_DATA_OFF 0x18fc
|
|
#define PCIE_MASK_OFF 0x1910
|
|
#define PCIE_MASK_ENABLE_INTS 0x0f000000
|
|
#define PCIE_CTRL_OFF 0x1a00
|
|
#define PCIE_CTRL_X1_MODE 0x0001
|
|
#define PCIE_STAT_OFF 0x1a04
|
|
#define PCIE_STAT_BUS 0xff00
|
|
#define PCIE_STAT_DEV 0x1f0000
|
|
#define PCIE_STAT_LINK_DOWN BIT(0)
|
|
#define PCIE_RC_RTSTA 0x1a14
|
|
#define PCIE_DEBUG_CTRL 0x1a60
|
|
#define PCIE_DEBUG_SOFT_RESET BIT(20)
|
|
|
|
struct mvebu_pcie_port;
|
|
|
|
/* Structure representing all PCIe interfaces */
|
|
struct mvebu_pcie {
|
|
struct platform_device *pdev;
|
|
struct mvebu_pcie_port *ports;
|
|
struct msi_controller *msi;
|
|
struct list_head resources;
|
|
struct resource io;
|
|
struct resource realio;
|
|
struct resource mem;
|
|
struct resource busn;
|
|
int nports;
|
|
};
|
|
|
|
struct mvebu_pcie_window {
|
|
phys_addr_t base;
|
|
phys_addr_t remap;
|
|
size_t size;
|
|
};
|
|
|
|
/* Structure representing one PCIe interface */
|
|
struct mvebu_pcie_port {
|
|
char *name;
|
|
void __iomem *base;
|
|
u32 port;
|
|
u32 lane;
|
|
int devfn;
|
|
unsigned int mem_target;
|
|
unsigned int mem_attr;
|
|
unsigned int io_target;
|
|
unsigned int io_attr;
|
|
struct clk *clk;
|
|
struct gpio_desc *reset_gpio;
|
|
char *reset_name;
|
|
struct pci_bridge_emul bridge;
|
|
struct device_node *dn;
|
|
struct mvebu_pcie *pcie;
|
|
struct mvebu_pcie_window memwin;
|
|
struct mvebu_pcie_window iowin;
|
|
u32 saved_pcie_stat;
|
|
};
|
|
|
|
static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
|
|
{
|
|
writel(val, port->base + reg);
|
|
}
|
|
|
|
static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
|
|
{
|
|
return readl(port->base + reg);
|
|
}
|
|
|
|
static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
|
|
{
|
|
return port->io_target != -1 && port->io_attr != -1;
|
|
}
|
|
|
|
static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
|
|
{
|
|
return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
|
|
}
|
|
|
|
static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
|
|
{
|
|
u32 stat;
|
|
|
|
stat = mvebu_readl(port, PCIE_STAT_OFF);
|
|
stat &= ~PCIE_STAT_BUS;
|
|
stat |= nr << 8;
|
|
mvebu_writel(port, stat, PCIE_STAT_OFF);
|
|
}
|
|
|
|
static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
|
|
{
|
|
u32 stat;
|
|
|
|
stat = mvebu_readl(port, PCIE_STAT_OFF);
|
|
stat &= ~PCIE_STAT_DEV;
|
|
stat |= nr << 16;
|
|
mvebu_writel(port, stat, PCIE_STAT_OFF);
|
|
}
|
|
|
|
/*
|
|
* Setup PCIE BARs and Address Decode Wins:
|
|
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
|
|
* WIN[0-3] -> DRAM bank[0-3]
|
|
*/
|
|
static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
|
|
{
|
|
const struct mbus_dram_target_info *dram;
|
|
u32 size;
|
|
int i;
|
|
|
|
dram = mv_mbus_dram_info();
|
|
|
|
/* First, disable and clear BARs and windows. */
|
|
for (i = 1; i < 3; i++) {
|
|
mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
|
|
mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
|
|
mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
|
|
}
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
|
|
mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
|
|
mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
|
|
}
|
|
|
|
mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
|
|
mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
|
|
mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
|
|
|
|
/* Setup windows for DDR banks. Count total DDR size on the fly. */
|
|
size = 0;
|
|
for (i = 0; i < dram->num_cs; i++) {
|
|
const struct mbus_dram_window *cs = dram->cs + i;
|
|
|
|
mvebu_writel(port, cs->base & 0xffff0000,
|
|
PCIE_WIN04_BASE_OFF(i));
|
|
mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
|
|
mvebu_writel(port,
|
|
((cs->size - 1) & 0xffff0000) |
|
|
(cs->mbus_attr << 8) |
|
|
(dram->mbus_dram_target_id << 4) | 1,
|
|
PCIE_WIN04_CTRL_OFF(i));
|
|
|
|
size += cs->size;
|
|
}
|
|
|
|
/* Round up 'size' to the nearest power of two. */
|
|
if ((size & (size - 1)) != 0)
|
|
size = 1 << fls(size);
|
|
|
|
/* Setup BAR[1] to all DRAM banks. */
|
|
mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
|
|
mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
|
|
mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
|
|
PCIE_BAR_CTRL_OFF(1));
|
|
}
|
|
|
|
static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
|
|
{
|
|
u32 cmd, mask;
|
|
|
|
/* Point PCIe unit MBUS decode windows to DRAM space. */
|
|
mvebu_pcie_setup_wins(port);
|
|
|
|
/* Master + slave enable. */
|
|
cmd = mvebu_readl(port, PCIE_CMD_OFF);
|
|
cmd |= PCI_COMMAND_IO;
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
cmd |= PCI_COMMAND_MASTER;
|
|
mvebu_writel(port, cmd, PCIE_CMD_OFF);
|
|
|
|
/* Enable interrupt lines A-D. */
|
|
mask = mvebu_readl(port, PCIE_MASK_OFF);
|
|
mask |= PCIE_MASK_ENABLE_INTS;
|
|
mvebu_writel(port, mask, PCIE_MASK_OFF);
|
|
}
|
|
|
|
static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
|
|
struct pci_bus *bus,
|
|
u32 devfn, int where, int size, u32 *val)
|
|
{
|
|
void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
|
|
|
|
mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
|
|
PCIE_CONF_ADDR_OFF);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
*val = readb_relaxed(conf_data + (where & 3));
|
|
break;
|
|
case 2:
|
|
*val = readw_relaxed(conf_data + (where & 2));
|
|
break;
|
|
case 4:
|
|
*val = readl_relaxed(conf_data);
|
|
break;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
|
|
struct pci_bus *bus,
|
|
u32 devfn, int where, int size, u32 val)
|
|
{
|
|
void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
|
|
|
|
mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
|
|
PCIE_CONF_ADDR_OFF);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
writeb(val, conf_data + (where & 3));
|
|
break;
|
|
case 2:
|
|
writew(val, conf_data + (where & 2));
|
|
break;
|
|
case 4:
|
|
writel(val, conf_data);
|
|
break;
|
|
default:
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*
|
|
* Remove windows, starting from the largest ones to the smallest
|
|
* ones.
|
|
*/
|
|
static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
|
|
phys_addr_t base, size_t size)
|
|
{
|
|
while (size) {
|
|
size_t sz = 1 << (fls(size) - 1);
|
|
|
|
mvebu_mbus_del_window(base, sz);
|
|
base += sz;
|
|
size -= sz;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* MBus windows can only have a power of two size, but PCI BARs do not
|
|
* have this constraint. Therefore, we have to split the PCI BAR into
|
|
* areas each having a power of two size. We start from the largest
|
|
* one (i.e highest order bit set in the size).
|
|
*/
|
|
static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
|
|
unsigned int target, unsigned int attribute,
|
|
phys_addr_t base, size_t size,
|
|
phys_addr_t remap)
|
|
{
|
|
size_t size_mapped = 0;
|
|
|
|
while (size) {
|
|
size_t sz = 1 << (fls(size) - 1);
|
|
int ret;
|
|
|
|
ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
|
|
sz, remap);
|
|
if (ret) {
|
|
phys_addr_t end = base + sz - 1;
|
|
|
|
dev_err(&port->pcie->pdev->dev,
|
|
"Could not create MBus window at [mem %pa-%pa]: %d\n",
|
|
&base, &end, ret);
|
|
mvebu_pcie_del_windows(port, base - size_mapped,
|
|
size_mapped);
|
|
return;
|
|
}
|
|
|
|
size -= sz;
|
|
size_mapped += sz;
|
|
base += sz;
|
|
if (remap != MVEBU_MBUS_NO_REMAP)
|
|
remap += sz;
|
|
}
|
|
}
|
|
|
|
static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
|
|
unsigned int target, unsigned int attribute,
|
|
const struct mvebu_pcie_window *desired,
|
|
struct mvebu_pcie_window *cur)
|
|
{
|
|
if (desired->base == cur->base && desired->remap == cur->remap &&
|
|
desired->size == cur->size)
|
|
return;
|
|
|
|
if (cur->size != 0) {
|
|
mvebu_pcie_del_windows(port, cur->base, cur->size);
|
|
cur->size = 0;
|
|
cur->base = 0;
|
|
|
|
/*
|
|
* If something tries to change the window while it is enabled
|
|
* the change will not be done atomically. That would be
|
|
* difficult to do in the general case.
|
|
*/
|
|
}
|
|
|
|
if (desired->size == 0)
|
|
return;
|
|
|
|
mvebu_pcie_add_windows(port, target, attribute, desired->base,
|
|
desired->size, desired->remap);
|
|
*cur = *desired;
|
|
}
|
|
|
|
static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
|
|
{
|
|
struct mvebu_pcie_window desired = {};
|
|
struct pci_bridge_emul_conf *conf = &port->bridge.conf;
|
|
|
|
/* Are the new iobase/iolimit values invalid? */
|
|
if (conf->iolimit < conf->iobase ||
|
|
conf->iolimitupper < conf->iobaseupper ||
|
|
!(conf->command & PCI_COMMAND_IO)) {
|
|
mvebu_pcie_set_window(port, port->io_target, port->io_attr,
|
|
&desired, &port->iowin);
|
|
return;
|
|
}
|
|
|
|
if (!mvebu_has_ioport(port)) {
|
|
dev_WARN(&port->pcie->pdev->dev,
|
|
"Attempt to set IO when IO is disabled\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* We read the PCI-to-PCI bridge emulated registers, and
|
|
* calculate the base address and size of the address decoding
|
|
* window to setup, according to the PCI-to-PCI bridge
|
|
* specifications. iobase is the bus address, port->iowin_base
|
|
* is the CPU address.
|
|
*/
|
|
desired.remap = ((conf->iobase & 0xF0) << 8) |
|
|
(conf->iobaseupper << 16);
|
|
desired.base = port->pcie->io.start + desired.remap;
|
|
desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) |
|
|
(conf->iolimitupper << 16)) -
|
|
desired.remap) +
|
|
1;
|
|
|
|
mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
|
|
&port->iowin);
|
|
}
|
|
|
|
static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
|
|
{
|
|
struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
|
|
struct pci_bridge_emul_conf *conf = &port->bridge.conf;
|
|
|
|
/* Are the new membase/memlimit values invalid? */
|
|
if (conf->memlimit < conf->membase ||
|
|
!(conf->command & PCI_COMMAND_MEMORY)) {
|
|
mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
|
|
&desired, &port->memwin);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* We read the PCI-to-PCI bridge emulated registers, and
|
|
* calculate the base address and size of the address decoding
|
|
* window to setup, according to the PCI-to-PCI bridge
|
|
* specifications.
|
|
*/
|
|
desired.base = ((conf->membase & 0xFFF0) << 16);
|
|
desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
|
|
desired.base + 1;
|
|
|
|
mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
|
|
&port->memwin);
|
|
}
|
|
|
|
static pci_bridge_emul_read_status_t
|
|
mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
|
|
int reg, u32 *value)
|
|
{
|
|
struct mvebu_pcie_port *port = bridge->data;
|
|
|
|
switch (reg) {
|
|
case PCI_EXP_DEVCAP:
|
|
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
|
|
break;
|
|
|
|
case PCI_EXP_DEVCTL:
|
|
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
|
|
~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
|
|
PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
|
|
break;
|
|
|
|
case PCI_EXP_LNKCAP:
|
|
/*
|
|
* PCIe requires the clock power management capability to be
|
|
* hard-wired to zero for downstream ports
|
|
*/
|
|
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
|
|
~PCI_EXP_LNKCAP_CLKPM;
|
|
break;
|
|
|
|
case PCI_EXP_LNKCTL:
|
|
*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
|
|
break;
|
|
|
|
case PCI_EXP_SLTCTL:
|
|
*value = PCI_EXP_SLTSTA_PDS << 16;
|
|
break;
|
|
|
|
case PCI_EXP_RTSTA:
|
|
*value = mvebu_readl(port, PCIE_RC_RTSTA);
|
|
break;
|
|
|
|
default:
|
|
return PCI_BRIDGE_EMUL_NOT_HANDLED;
|
|
}
|
|
|
|
return PCI_BRIDGE_EMUL_HANDLED;
|
|
}
|
|
|
|
static void
|
|
mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
|
|
int reg, u32 old, u32 new, u32 mask)
|
|
{
|
|
struct mvebu_pcie_port *port = bridge->data;
|
|
struct pci_bridge_emul_conf *conf = &bridge->conf;
|
|
|
|
switch (reg) {
|
|
case PCI_COMMAND:
|
|
{
|
|
if (!mvebu_has_ioport(port))
|
|
conf->command &= ~PCI_COMMAND_IO;
|
|
|
|
if ((old ^ new) & PCI_COMMAND_IO)
|
|
mvebu_pcie_handle_iobase_change(port);
|
|
if ((old ^ new) & PCI_COMMAND_MEMORY)
|
|
mvebu_pcie_handle_membase_change(port);
|
|
|
|
break;
|
|
}
|
|
|
|
case PCI_IO_BASE:
|
|
/*
|
|
* We keep bit 1 set, it is a read-only bit that
|
|
* indicates we support 32 bits addressing for the
|
|
* I/O
|
|
*/
|
|
conf->iobase |= PCI_IO_RANGE_TYPE_32;
|
|
conf->iolimit |= PCI_IO_RANGE_TYPE_32;
|
|
mvebu_pcie_handle_iobase_change(port);
|
|
break;
|
|
|
|
case PCI_MEMORY_BASE:
|
|
mvebu_pcie_handle_membase_change(port);
|
|
break;
|
|
|
|
case PCI_IO_BASE_UPPER16:
|
|
mvebu_pcie_handle_iobase_change(port);
|
|
break;
|
|
|
|
case PCI_PRIMARY_BUS:
|
|
mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
|
|
int reg, u32 old, u32 new, u32 mask)
|
|
{
|
|
struct mvebu_pcie_port *port = bridge->data;
|
|
|
|
switch (reg) {
|
|
case PCI_EXP_DEVCTL:
|
|
/*
|
|
* Armada370 data says these bits must always
|
|
* be zero when in root complex mode.
|
|
*/
|
|
new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
|
|
PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
|
|
|
|
mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
|
|
break;
|
|
|
|
case PCI_EXP_LNKCTL:
|
|
/*
|
|
* If we don't support CLKREQ, we must ensure that the
|
|
* CLKREQ enable bit always reads zero. Since we haven't
|
|
* had this capability, and it's dependent on board wiring,
|
|
* disable it for the time being.
|
|
*/
|
|
new &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
|
|
mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
|
|
break;
|
|
|
|
case PCI_EXP_RTSTA:
|
|
mvebu_writel(port, new, PCIE_RC_RTSTA);
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
|
|
.write_base = mvebu_pci_bridge_emul_base_conf_write,
|
|
.read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
|
|
.write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
|
|
};
|
|
|
|
/*
|
|
* Initialize the configuration space of the PCI-to-PCI bridge
|
|
* associated with the given PCIe interface.
|
|
*/
|
|
static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
|
|
{
|
|
struct pci_bridge_emul *bridge = &port->bridge;
|
|
|
|
bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
|
|
bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
|
|
bridge->conf.class_revision =
|
|
mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
|
|
|
|
if (mvebu_has_ioport(port)) {
|
|
/* We support 32 bits I/O addressing */
|
|
bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
|
|
bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
|
|
}
|
|
|
|
bridge->has_pcie = true;
|
|
bridge->data = port;
|
|
bridge->ops = &mvebu_pci_bridge_emul_ops;
|
|
|
|
pci_bridge_emul_init(bridge, PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR);
|
|
}
|
|
|
|
static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
|
|
{
|
|
return sys->private_data;
|
|
}
|
|
|
|
static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
|
|
struct pci_bus *bus,
|
|
int devfn)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < pcie->nports; i++) {
|
|
struct mvebu_pcie_port *port = &pcie->ports[i];
|
|
|
|
if (bus->number == 0 && port->devfn == devfn)
|
|
return port;
|
|
if (bus->number != 0 &&
|
|
bus->number >= port->bridge.conf.secondary_bus &&
|
|
bus->number <= port->bridge.conf.subordinate_bus)
|
|
return port;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* PCI configuration space write function */
|
|
static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct mvebu_pcie *pcie = bus->sysdata;
|
|
struct mvebu_pcie_port *port;
|
|
int ret;
|
|
|
|
port = mvebu_pcie_find_port(pcie, bus, devfn);
|
|
if (!port)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/* Access the emulated PCI-to-PCI bridge */
|
|
if (bus->number == 0)
|
|
return pci_bridge_emul_conf_write(&port->bridge, where,
|
|
size, val);
|
|
|
|
if (!mvebu_pcie_link_up(port))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/* Access the real PCIe interface */
|
|
ret = mvebu_pcie_hw_wr_conf(port, bus, devfn,
|
|
where, size, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* PCI configuration space read function */
|
|
static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
|
|
int size, u32 *val)
|
|
{
|
|
struct mvebu_pcie *pcie = bus->sysdata;
|
|
struct mvebu_pcie_port *port;
|
|
int ret;
|
|
|
|
port = mvebu_pcie_find_port(pcie, bus, devfn);
|
|
if (!port) {
|
|
*val = 0xffffffff;
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
/* Access the emulated PCI-to-PCI bridge */
|
|
if (bus->number == 0)
|
|
return pci_bridge_emul_conf_read(&port->bridge, where,
|
|
size, val);
|
|
|
|
if (!mvebu_pcie_link_up(port)) {
|
|
*val = 0xffffffff;
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
/* Access the real PCIe interface */
|
|
ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
|
|
where, size, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct pci_ops mvebu_pcie_ops = {
|
|
.read = mvebu_pcie_rd_conf,
|
|
.write = mvebu_pcie_wr_conf,
|
|
};
|
|
|
|
static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
|
|
const struct resource *res,
|
|
resource_size_t start,
|
|
resource_size_t size,
|
|
resource_size_t align)
|
|
{
|
|
if (dev->bus->number != 0)
|
|
return start;
|
|
|
|
/*
|
|
* On the PCI-to-PCI bridge side, the I/O windows must have at
|
|
* least a 64 KB size and the memory windows must have at
|
|
* least a 1 MB size. Moreover, MBus windows need to have a
|
|
* base address aligned on their size, and their size must be
|
|
* a power of two. This means that if the BAR doesn't have a
|
|
* power of two size, several MBus windows will actually be
|
|
* created. We need to ensure that the biggest MBus window
|
|
* (which will be the first one) is aligned on its size, which
|
|
* explains the rounddown_pow_of_two() being done here.
|
|
*/
|
|
if (res->flags & IORESOURCE_IO)
|
|
return round_up(start, max_t(resource_size_t, SZ_64K,
|
|
rounddown_pow_of_two(size)));
|
|
else if (res->flags & IORESOURCE_MEM)
|
|
return round_up(start, max_t(resource_size_t, SZ_1M,
|
|
rounddown_pow_of_two(size)));
|
|
else
|
|
return start;
|
|
}
|
|
|
|
static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
|
|
struct device_node *np,
|
|
struct mvebu_pcie_port *port)
|
|
{
|
|
struct resource regs;
|
|
int ret = 0;
|
|
|
|
ret = of_address_to_resource(np, 0, ®s);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
return devm_ioremap_resource(&pdev->dev, ®s);
|
|
}
|
|
|
|
#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
|
|
#define DT_TYPE_IO 0x1
|
|
#define DT_TYPE_MEM32 0x2
|
|
#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
|
|
#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
|
|
|
|
static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
|
|
unsigned long type,
|
|
unsigned int *tgt,
|
|
unsigned int *attr)
|
|
{
|
|
const int na = 3, ns = 2;
|
|
const __be32 *range;
|
|
int rlen, nranges, rangesz, pna, i;
|
|
|
|
*tgt = -1;
|
|
*attr = -1;
|
|
|
|
range = of_get_property(np, "ranges", &rlen);
|
|
if (!range)
|
|
return -EINVAL;
|
|
|
|
pna = of_n_addr_cells(np);
|
|
rangesz = pna + na + ns;
|
|
nranges = rlen / sizeof(__be32) / rangesz;
|
|
|
|
for (i = 0; i < nranges; i++, range += rangesz) {
|
|
u32 flags = of_read_number(range, 1);
|
|
u32 slot = of_read_number(range + 1, 1);
|
|
u64 cpuaddr = of_read_number(range + na, pna);
|
|
unsigned long rtype;
|
|
|
|
if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
|
|
rtype = IORESOURCE_IO;
|
|
else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
|
|
rtype = IORESOURCE_MEM;
|
|
else
|
|
continue;
|
|
|
|
if (slot == PCI_SLOT(devfn) && type == rtype) {
|
|
*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
|
|
*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mvebu_pcie_suspend(struct device *dev)
|
|
{
|
|
struct mvebu_pcie *pcie;
|
|
int i;
|
|
|
|
pcie = dev_get_drvdata(dev);
|
|
for (i = 0; i < pcie->nports; i++) {
|
|
struct mvebu_pcie_port *port = pcie->ports + i;
|
|
port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_pcie_resume(struct device *dev)
|
|
{
|
|
struct mvebu_pcie *pcie;
|
|
int i;
|
|
|
|
pcie = dev_get_drvdata(dev);
|
|
for (i = 0; i < pcie->nports; i++) {
|
|
struct mvebu_pcie_port *port = pcie->ports + i;
|
|
mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
|
|
mvebu_pcie_setup_hw(port);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void mvebu_pcie_port_clk_put(void *data)
|
|
{
|
|
struct mvebu_pcie_port *port = data;
|
|
|
|
clk_put(port->clk);
|
|
}
|
|
|
|
static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
|
|
struct mvebu_pcie_port *port, struct device_node *child)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
enum of_gpio_flags flags;
|
|
int reset_gpio, ret;
|
|
|
|
port->pcie = pcie;
|
|
|
|
if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
|
|
dev_warn(dev, "ignoring %pOF, missing pcie-port property\n",
|
|
child);
|
|
goto skip;
|
|
}
|
|
|
|
if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
|
|
port->lane = 0;
|
|
|
|
port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
|
|
port->lane);
|
|
if (!port->name) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
port->devfn = of_pci_get_devfn(child);
|
|
if (port->devfn < 0)
|
|
goto skip;
|
|
|
|
ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
|
|
&port->mem_target, &port->mem_attr);
|
|
if (ret < 0) {
|
|
dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
|
|
port->name);
|
|
goto skip;
|
|
}
|
|
|
|
if (resource_size(&pcie->io) != 0) {
|
|
mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
|
|
&port->io_target, &port->io_attr);
|
|
} else {
|
|
port->io_target = -1;
|
|
port->io_attr = -1;
|
|
}
|
|
|
|
reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
|
|
if (reset_gpio == -EPROBE_DEFER) {
|
|
ret = reset_gpio;
|
|
goto err;
|
|
}
|
|
|
|
if (gpio_is_valid(reset_gpio)) {
|
|
unsigned long gpio_flags;
|
|
|
|
port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
|
|
port->name);
|
|
if (!port->reset_name) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
if (flags & OF_GPIO_ACTIVE_LOW) {
|
|
dev_info(dev, "%pOF: reset gpio is active low\n",
|
|
child);
|
|
gpio_flags = GPIOF_ACTIVE_LOW |
|
|
GPIOF_OUT_INIT_LOW;
|
|
} else {
|
|
gpio_flags = GPIOF_OUT_INIT_HIGH;
|
|
}
|
|
|
|
ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
|
|
port->reset_name);
|
|
if (ret) {
|
|
if (ret == -EPROBE_DEFER)
|
|
goto err;
|
|
goto skip;
|
|
}
|
|
|
|
port->reset_gpio = gpio_to_desc(reset_gpio);
|
|
}
|
|
|
|
port->clk = of_clk_get_by_name(child, NULL);
|
|
if (IS_ERR(port->clk)) {
|
|
dev_err(dev, "%s: cannot get clock\n", port->name);
|
|
goto skip;
|
|
}
|
|
|
|
ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
|
|
if (ret < 0) {
|
|
clk_put(port->clk);
|
|
goto err;
|
|
}
|
|
|
|
return 1;
|
|
|
|
skip:
|
|
ret = 0;
|
|
|
|
/* In the case of skipping, we need to free these */
|
|
devm_kfree(dev, port->reset_name);
|
|
port->reset_name = NULL;
|
|
devm_kfree(dev, port->name);
|
|
port->name = NULL;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Power up a PCIe port. PCIe requires the refclk to be stable for 100µs
|
|
* prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications
|
|
* of the PCI Express Card Electromechanical Specification, 1.1.
|
|
*/
|
|
static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(port->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (port->reset_gpio) {
|
|
u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
|
|
|
|
of_property_read_u32(port->dn, "reset-delay-us",
|
|
&reset_udelay);
|
|
|
|
udelay(100);
|
|
|
|
gpiod_set_value_cansleep(port->reset_gpio, 0);
|
|
msleep(reset_udelay / 1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Power down a PCIe port. Strictly, PCIe requires us to place the card
|
|
* in D3hot state before asserting PERST#.
|
|
*/
|
|
static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
|
|
{
|
|
gpiod_set_value_cansleep(port->reset_gpio, 1);
|
|
|
|
clk_disable_unprepare(port->clk);
|
|
}
|
|
|
|
/*
|
|
* We can't use devm_of_pci_get_host_bridge_resources() because we
|
|
* need to parse our special DT properties encoding the MEM and IO
|
|
* apertures.
|
|
*/
|
|
static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
|
|
{
|
|
struct device *dev = &pcie->pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
int ret;
|
|
|
|
INIT_LIST_HEAD(&pcie->resources);
|
|
|
|
/* Get the bus range */
|
|
ret = of_pci_parse_bus_range(np, &pcie->busn);
|
|
if (ret) {
|
|
dev_err(dev, "failed to parse bus-range property: %d\n", ret);
|
|
return ret;
|
|
}
|
|
pci_add_resource(&pcie->resources, &pcie->busn);
|
|
|
|
/* Get the PCIe memory aperture */
|
|
mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
|
|
if (resource_size(&pcie->mem) == 0) {
|
|
dev_err(dev, "invalid memory aperture size\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pcie->mem.name = "PCI MEM";
|
|
pci_add_resource(&pcie->resources, &pcie->mem);
|
|
|
|
/* Get the PCIe IO aperture */
|
|
mvebu_mbus_get_pcie_io_aperture(&pcie->io);
|
|
|
|
if (resource_size(&pcie->io) != 0) {
|
|
pcie->realio.flags = pcie->io.flags;
|
|
pcie->realio.start = PCIBIOS_MIN_IO;
|
|
pcie->realio.end = min_t(resource_size_t,
|
|
IO_SPACE_LIMIT - SZ_64K,
|
|
resource_size(&pcie->io) - 1);
|
|
pcie->realio.name = "PCI I/O";
|
|
|
|
pci_add_resource(&pcie->resources, &pcie->realio);
|
|
}
|
|
|
|
return devm_request_pci_bus_resources(dev, &pcie->resources);
|
|
}
|
|
|
|
/*
|
|
* This is a copy of pci_host_probe(), except that it does the I/O
|
|
* remap as the last step, once we are sure we won't fail.
|
|
*
|
|
* It should be removed once the I/O remap error handling issue has
|
|
* been sorted out.
|
|
*/
|
|
static int mvebu_pci_host_probe(struct pci_host_bridge *bridge)
|
|
{
|
|
struct mvebu_pcie *pcie;
|
|
struct pci_bus *bus, *child;
|
|
int ret;
|
|
|
|
ret = pci_scan_root_bus_bridge(bridge);
|
|
if (ret < 0) {
|
|
dev_err(bridge->dev.parent, "Scanning root bridge failed");
|
|
return ret;
|
|
}
|
|
|
|
pcie = pci_host_bridge_priv(bridge);
|
|
if (resource_size(&pcie->io) != 0) {
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
|
|
pci_ioremap_io(i, pcie->io.start + i);
|
|
}
|
|
|
|
bus = bridge->bus;
|
|
|
|
/*
|
|
* We insert PCI resources into the iomem_resource and
|
|
* ioport_resource trees in either pci_bus_claim_resources()
|
|
* or pci_bus_assign_resources().
|
|
*/
|
|
if (pci_has_flag(PCI_PROBE_ONLY)) {
|
|
pci_bus_claim_resources(bus);
|
|
} else {
|
|
pci_bus_size_bridges(bus);
|
|
pci_bus_assign_resources(bus);
|
|
|
|
list_for_each_entry(child, &bus->children, node)
|
|
pcie_bus_configure_settings(child);
|
|
}
|
|
|
|
pci_bus_add_devices(bus);
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct mvebu_pcie *pcie;
|
|
struct pci_host_bridge *bridge;
|
|
struct device_node *np = dev->of_node;
|
|
struct device_node *child;
|
|
int num, i, ret;
|
|
|
|
bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie));
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
pcie = pci_host_bridge_priv(bridge);
|
|
pcie->pdev = pdev;
|
|
platform_set_drvdata(pdev, pcie);
|
|
|
|
ret = mvebu_pcie_parse_request_resources(pcie);
|
|
if (ret)
|
|
return ret;
|
|
|
|
num = of_get_available_child_count(np);
|
|
|
|
pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
|
|
if (!pcie->ports)
|
|
return -ENOMEM;
|
|
|
|
i = 0;
|
|
for_each_available_child_of_node(np, child) {
|
|
struct mvebu_pcie_port *port = &pcie->ports[i];
|
|
|
|
ret = mvebu_pcie_parse_port(pcie, port, child);
|
|
if (ret < 0) {
|
|
of_node_put(child);
|
|
return ret;
|
|
} else if (ret == 0) {
|
|
continue;
|
|
}
|
|
|
|
port->dn = child;
|
|
i++;
|
|
}
|
|
pcie->nports = i;
|
|
|
|
for (i = 0; i < pcie->nports; i++) {
|
|
struct mvebu_pcie_port *port = &pcie->ports[i];
|
|
|
|
child = port->dn;
|
|
if (!child)
|
|
continue;
|
|
|
|
ret = mvebu_pcie_powerup(port);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
port->base = mvebu_pcie_map_registers(pdev, child, port);
|
|
if (IS_ERR(port->base)) {
|
|
dev_err(dev, "%s: cannot map registers\n", port->name);
|
|
port->base = NULL;
|
|
mvebu_pcie_powerdown(port);
|
|
continue;
|
|
}
|
|
|
|
mvebu_pcie_setup_hw(port);
|
|
mvebu_pcie_set_local_dev_nr(port, 1);
|
|
mvebu_pci_bridge_emul_init(port);
|
|
}
|
|
|
|
pcie->nports = i;
|
|
|
|
list_splice_init(&pcie->resources, &bridge->windows);
|
|
bridge->dev.parent = dev;
|
|
bridge->sysdata = pcie;
|
|
bridge->busnr = 0;
|
|
bridge->ops = &mvebu_pcie_ops;
|
|
bridge->map_irq = of_irq_parse_and_map_pci;
|
|
bridge->swizzle_irq = pci_common_swizzle;
|
|
bridge->align_resource = mvebu_pcie_align_resource;
|
|
bridge->msi = pcie->msi;
|
|
|
|
return mvebu_pci_host_probe(bridge);
|
|
}
|
|
|
|
static const struct of_device_id mvebu_pcie_of_match_table[] = {
|
|
{ .compatible = "marvell,armada-xp-pcie", },
|
|
{ .compatible = "marvell,armada-370-pcie", },
|
|
{ .compatible = "marvell,dove-pcie", },
|
|
{ .compatible = "marvell,kirkwood-pcie", },
|
|
{},
|
|
};
|
|
|
|
static const struct dev_pm_ops mvebu_pcie_pm_ops = {
|
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
|
|
};
|
|
|
|
static struct platform_driver mvebu_pcie_driver = {
|
|
.driver = {
|
|
.name = "mvebu-pcie",
|
|
.of_match_table = mvebu_pcie_of_match_table,
|
|
/* driver unloading/unbinding currently not supported */
|
|
.suppress_bind_attrs = true,
|
|
.pm = &mvebu_pcie_pm_ops,
|
|
},
|
|
.probe = mvebu_pcie_probe,
|
|
};
|
|
builtin_platform_driver(mvebu_pcie_driver);
|