mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-06 02:24:14 +08:00
a0386bba70
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
254 lines
6.2 KiB
C
254 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* NEC NL8048HL11 Panel Driver
|
|
*
|
|
* Copyright (C) 2019 Texas Instruments Incorporated
|
|
*
|
|
* Based on the omapdrm-specific panel-nec-nl8048hl11 driver
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments Incorporated
|
|
* Author: Erik Gilling <konkers@android.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <drm/drm_connector.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
struct nl8048_panel {
|
|
struct drm_panel panel;
|
|
|
|
struct spi_device *spi;
|
|
struct gpio_desc *reset_gpio;
|
|
};
|
|
|
|
#define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel)
|
|
|
|
static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr,
|
|
unsigned char value)
|
|
{
|
|
u8 data[4] = { value, 0x01, addr, 0x00 };
|
|
int ret;
|
|
|
|
ret = spi_write(lcd->spi, data, sizeof(data));
|
|
if (ret)
|
|
dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n",
|
|
addr, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nl8048_init(struct nl8048_panel *lcd)
|
|
{
|
|
static const struct {
|
|
unsigned char addr;
|
|
unsigned char data;
|
|
} nl8048_init_seq[] = {
|
|
{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 },
|
|
{ 5, 0x14 }, { 6, 0x24 }, { 16, 0xd7 }, { 17, 0x00 },
|
|
{ 18, 0x00 }, { 19, 0x55 }, { 20, 0x01 }, { 21, 0x70 },
|
|
{ 22, 0x1e }, { 23, 0x25 }, { 24, 0x25 }, { 25, 0x02 },
|
|
{ 26, 0x02 }, { 27, 0xa0 }, { 32, 0x2f }, { 33, 0x0f },
|
|
{ 34, 0x0f }, { 35, 0x0f }, { 36, 0x0f }, { 37, 0x0f },
|
|
{ 38, 0x0f }, { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 },
|
|
{ 42, 0x02 }, { 43, 0x0f }, { 44, 0x0f }, { 45, 0x0f },
|
|
{ 46, 0x0f }, { 47, 0x0f }, { 48, 0x0f }, { 49, 0x0f },
|
|
{ 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
|
|
{ 80, 0x0c }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },
|
|
{ 86, 0x14 }, { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 },
|
|
{ 92, 0x02 }, { 93, 0x0c }, { 94, 0x1c }, { 95, 0x27 },
|
|
{ 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, { 103, 0x27 },
|
|
{ 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c },
|
|
{ 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 },
|
|
{ 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 },
|
|
{ 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 },
|
|
{ 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 },
|
|
{ 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 },
|
|
{ 157, 0x00 },
|
|
};
|
|
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) {
|
|
ret = nl8048_write(lcd, nl8048_init_seq[i].addr,
|
|
nl8048_init_seq[i].data);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
udelay(20);
|
|
|
|
return nl8048_write(lcd, 2, 0x00);
|
|
}
|
|
|
|
static int nl8048_disable(struct drm_panel *panel)
|
|
{
|
|
struct nl8048_panel *lcd = to_nl8048_device(panel);
|
|
|
|
gpiod_set_value_cansleep(lcd->reset_gpio, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nl8048_enable(struct drm_panel *panel)
|
|
{
|
|
struct nl8048_panel *lcd = to_nl8048_device(panel);
|
|
|
|
gpiod_set_value_cansleep(lcd->reset_gpio, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode nl8048_mode = {
|
|
/* NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */
|
|
.clock = 23800,
|
|
.hdisplay = 800,
|
|
.hsync_start = 800 + 6,
|
|
.hsync_end = 800 + 6 + 1,
|
|
.htotal = 800 + 6 + 1 + 4,
|
|
.vdisplay = 480,
|
|
.vsync_start = 480 + 3,
|
|
.vsync_end = 480 + 3 + 1,
|
|
.vtotal = 480 + 3 + 1 + 4,
|
|
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
|
|
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
|
.width_mm = 89,
|
|
.height_mm = 53,
|
|
};
|
|
|
|
static int nl8048_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &nl8048_mode);
|
|
if (!mode)
|
|
return -ENOMEM;
|
|
|
|
drm_mode_set_name(mode);
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
connector->display_info.width_mm = nl8048_mode.width_mm;
|
|
connector->display_info.height_mm = nl8048_mode.height_mm;
|
|
connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
|
|
| DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
|
|
| DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs nl8048_funcs = {
|
|
.disable = nl8048_disable,
|
|
.enable = nl8048_enable,
|
|
.get_modes = nl8048_get_modes,
|
|
};
|
|
|
|
static int __maybe_unused nl8048_suspend(struct device *dev)
|
|
{
|
|
struct nl8048_panel *lcd = dev_get_drvdata(dev);
|
|
|
|
nl8048_write(lcd, 2, 0x01);
|
|
msleep(40);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused nl8048_resume(struct device *dev)
|
|
{
|
|
struct nl8048_panel *lcd = dev_get_drvdata(dev);
|
|
|
|
/* Reinitialize the panel. */
|
|
spi_setup(lcd->spi);
|
|
nl8048_write(lcd, 2, 0x00);
|
|
nl8048_init(lcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume);
|
|
|
|
static int nl8048_probe(struct spi_device *spi)
|
|
{
|
|
struct nl8048_panel *lcd;
|
|
int ret;
|
|
|
|
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
|
|
if (!lcd)
|
|
return -ENOMEM;
|
|
|
|
spi_set_drvdata(spi, lcd);
|
|
lcd->spi = spi;
|
|
|
|
lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(lcd->reset_gpio)) {
|
|
dev_err(&spi->dev, "failed to parse reset gpio\n");
|
|
return PTR_ERR(lcd->reset_gpio);
|
|
}
|
|
|
|
spi->mode = SPI_MODE_0;
|
|
spi->bits_per_word = 32;
|
|
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = nl8048_init(lcd);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
drm_panel_init(&lcd->panel, &lcd->spi->dev, &nl8048_funcs,
|
|
DRM_MODE_CONNECTOR_DPI);
|
|
|
|
drm_panel_add(&lcd->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nl8048_remove(struct spi_device *spi)
|
|
{
|
|
struct nl8048_panel *lcd = spi_get_drvdata(spi);
|
|
|
|
drm_panel_remove(&lcd->panel);
|
|
drm_panel_disable(&lcd->panel);
|
|
drm_panel_unprepare(&lcd->panel);
|
|
}
|
|
|
|
static const struct of_device_id nl8048_of_match[] = {
|
|
{ .compatible = "nec,nl8048hl11", },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, nl8048_of_match);
|
|
|
|
static const struct spi_device_id nl8048_ids[] = {
|
|
{ "nl8048hl11", 0 },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(spi, nl8048_ids);
|
|
|
|
static struct spi_driver nl8048_driver = {
|
|
.probe = nl8048_probe,
|
|
.remove = nl8048_remove,
|
|
.id_table = nl8048_ids,
|
|
.driver = {
|
|
.name = "panel-nec-nl8048hl11",
|
|
.pm = &nl8048_pm_ops,
|
|
.of_match_table = nl8048_of_match,
|
|
},
|
|
};
|
|
|
|
module_spi_driver(nl8048_driver);
|
|
|
|
MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
|
|
MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
|
|
MODULE_LICENSE("GPL");
|