mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
1975d16786
After commitb8a1a4cd5a
("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then03c835f498
("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230505131718.1210071-1-u.kleine-koenig@pengutronix.de [groeck: Added missing change in pmbus/acbel-fsg032.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
780 lines
20 KiB
C
780 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* tmp401.c
|
|
*
|
|
* Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
|
|
* Preliminary tmp411 support by:
|
|
* Gabriel Konat, Sander Leget, Wouter Willems
|
|
* Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
|
|
*
|
|
* Cleanup and support for TMP431 and TMP432 by Guenter Roeck
|
|
* Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
|
|
*/
|
|
|
|
/*
|
|
* Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
|
|
*
|
|
* Note this IC is in some aspect similar to the LM90, but it has quite a
|
|
* few differences too, for example the local temp has a higher resolution
|
|
* and thus has 16 bits registers for its value and limit instead of 8 bits.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d,
|
|
0x4e, 0x4f, I2C_CLIENT_END };
|
|
|
|
enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
|
|
|
|
/*
|
|
* The TMP401 registers, note some registers have different addresses for
|
|
* reading and writing
|
|
*/
|
|
#define TMP401_STATUS 0x02
|
|
#define TMP401_CONFIG 0x03
|
|
#define TMP401_CONVERSION_RATE 0x04
|
|
#define TMP4XX_N_FACTOR_REG 0x18
|
|
#define TMP43X_BETA_RANGE 0x25
|
|
#define TMP401_TEMP_CRIT_HYST 0x21
|
|
#define TMP401_MANUFACTURER_ID_REG 0xFE
|
|
#define TMP401_DEVICE_ID_REG 0xFF
|
|
|
|
static const u8 TMP401_TEMP_MSB[7][3] = {
|
|
{ 0x00, 0x01, 0x23 }, /* temp */
|
|
{ 0x06, 0x08, 0x16 }, /* low limit */
|
|
{ 0x05, 0x07, 0x15 }, /* high limit */
|
|
{ 0x20, 0x19, 0x1a }, /* therm (crit) limit */
|
|
{ 0x30, 0x34, 0x00 }, /* lowest */
|
|
{ 0x32, 0xf6, 0x00 }, /* highest */
|
|
};
|
|
|
|
/* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
|
|
static const u8 TMP432_STATUS_REG[] = {
|
|
0x1b, 0x36, 0x35, 0x37 };
|
|
|
|
/* Flags */
|
|
#define TMP401_CONFIG_RANGE BIT(2)
|
|
#define TMP401_CONFIG_SHUTDOWN BIT(6)
|
|
#define TMP401_STATUS_LOCAL_CRIT BIT(0)
|
|
#define TMP401_STATUS_REMOTE_CRIT BIT(1)
|
|
#define TMP401_STATUS_REMOTE_OPEN BIT(2)
|
|
#define TMP401_STATUS_REMOTE_LOW BIT(3)
|
|
#define TMP401_STATUS_REMOTE_HIGH BIT(4)
|
|
#define TMP401_STATUS_LOCAL_LOW BIT(5)
|
|
#define TMP401_STATUS_LOCAL_HIGH BIT(6)
|
|
|
|
/* On TMP432, each status has its own register */
|
|
#define TMP432_STATUS_LOCAL BIT(0)
|
|
#define TMP432_STATUS_REMOTE1 BIT(1)
|
|
#define TMP432_STATUS_REMOTE2 BIT(2)
|
|
|
|
/* Manufacturer / Device ID's */
|
|
#define TMP401_MANUFACTURER_ID 0x55
|
|
#define TMP401_DEVICE_ID 0x11
|
|
#define TMP411A_DEVICE_ID 0x12
|
|
#define TMP411B_DEVICE_ID 0x13
|
|
#define TMP411C_DEVICE_ID 0x10
|
|
#define TMP431_DEVICE_ID 0x31
|
|
#define TMP432_DEVICE_ID 0x32
|
|
#define TMP435_DEVICE_ID 0x35
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static const struct i2c_device_id tmp401_id[] = {
|
|
{ "tmp401", tmp401 },
|
|
{ "tmp411", tmp411 },
|
|
{ "tmp431", tmp431 },
|
|
{ "tmp432", tmp432 },
|
|
{ "tmp435", tmp435 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tmp401_id);
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct tmp401_data {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
struct mutex update_lock;
|
|
enum chips kind;
|
|
|
|
bool extended_range;
|
|
|
|
/* hwmon API configuration data */
|
|
u32 chip_channel_config[4];
|
|
struct hwmon_channel_info chip_info;
|
|
u32 temp_channel_config[4];
|
|
struct hwmon_channel_info temp_info;
|
|
const struct hwmon_channel_info *info[3];
|
|
struct hwmon_chip_info chip;
|
|
};
|
|
|
|
/* regmap */
|
|
|
|
static bool tmp401_regmap_is_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0: /* local temp msb */
|
|
case 1: /* remote temp msb */
|
|
case 2: /* status */
|
|
case 0x10: /* remote temp lsb */
|
|
case 0x15: /* local temp lsb */
|
|
case 0x1b: /* status (tmp432) */
|
|
case 0x23 ... 0x24: /* remote temp 2 msb / lsb */
|
|
case 0x30 ... 0x37: /* lowest/highest temp; status (tmp432) */
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int tmp401_reg_read(void *context, unsigned int reg, unsigned int *val)
|
|
{
|
|
struct tmp401_data *data = context;
|
|
struct i2c_client *client = data->client;
|
|
int regval;
|
|
|
|
switch (reg) {
|
|
case 0: /* local temp msb */
|
|
case 1: /* remote temp msb */
|
|
case 5: /* local temp high limit msb */
|
|
case 6: /* local temp low limit msb */
|
|
case 7: /* remote temp ligh limit msb */
|
|
case 8: /* remote temp low limit msb */
|
|
case 0x15: /* remote temp 2 high limit msb */
|
|
case 0x16: /* remote temp 2 low limit msb */
|
|
case 0x23: /* remote temp 2 msb */
|
|
case 0x30: /* local temp minimum, tmp411 */
|
|
case 0x32: /* local temp maximum, tmp411 */
|
|
case 0x34: /* remote temp minimum, tmp411 */
|
|
case 0xf6: /* remote temp maximum, tmp411 (really 0x36) */
|
|
/* work around register overlap between TMP411 and TMP432 */
|
|
if (reg == 0xf6)
|
|
reg = 0x36;
|
|
regval = i2c_smbus_read_word_swapped(client, reg);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = regval;
|
|
break;
|
|
case 0x19: /* critical limits, 8-bit registers */
|
|
case 0x1a:
|
|
case 0x20:
|
|
regval = i2c_smbus_read_byte_data(client, reg);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = regval << 8;
|
|
break;
|
|
case 0x1b:
|
|
case 0x35 ... 0x37:
|
|
if (data->kind == tmp432) {
|
|
regval = i2c_smbus_read_byte_data(client, reg);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = regval;
|
|
break;
|
|
}
|
|
/* simulate TMP432 status registers */
|
|
regval = i2c_smbus_read_byte_data(client, TMP401_STATUS);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = 0;
|
|
switch (reg) {
|
|
case 0x1b: /* open / fault */
|
|
if (regval & TMP401_STATUS_REMOTE_OPEN)
|
|
*val |= BIT(1);
|
|
break;
|
|
case 0x35: /* high limit */
|
|
if (regval & TMP401_STATUS_LOCAL_HIGH)
|
|
*val |= BIT(0);
|
|
if (regval & TMP401_STATUS_REMOTE_HIGH)
|
|
*val |= BIT(1);
|
|
break;
|
|
case 0x36: /* low limit */
|
|
if (regval & TMP401_STATUS_LOCAL_LOW)
|
|
*val |= BIT(0);
|
|
if (regval & TMP401_STATUS_REMOTE_LOW)
|
|
*val |= BIT(1);
|
|
break;
|
|
case 0x37: /* therm / crit limit */
|
|
if (regval & TMP401_STATUS_LOCAL_CRIT)
|
|
*val |= BIT(0);
|
|
if (regval & TMP401_STATUS_REMOTE_CRIT)
|
|
*val |= BIT(1);
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
regval = i2c_smbus_read_byte_data(client, reg);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = regval;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tmp401_reg_write(void *context, unsigned int reg, unsigned int val)
|
|
{
|
|
struct tmp401_data *data = context;
|
|
struct i2c_client *client = data->client;
|
|
|
|
switch (reg) {
|
|
case 0x05: /* local temp high limit msb */
|
|
case 0x06: /* local temp low limit msb */
|
|
case 0x07: /* remote temp ligh limit msb */
|
|
case 0x08: /* remote temp low limit msb */
|
|
reg += 6; /* adjust for register write address */
|
|
fallthrough;
|
|
case 0x15: /* remote temp 2 high limit msb */
|
|
case 0x16: /* remote temp 2 low limit msb */
|
|
return i2c_smbus_write_word_swapped(client, reg, val);
|
|
case 0x19: /* critical limits, 8-bit registers */
|
|
case 0x1a:
|
|
case 0x20:
|
|
return i2c_smbus_write_byte_data(client, reg, val >> 8);
|
|
case TMP401_CONVERSION_RATE:
|
|
case TMP401_CONFIG:
|
|
reg += 6; /* adjust for register write address */
|
|
fallthrough;
|
|
default:
|
|
return i2c_smbus_write_byte_data(client, reg, val);
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config tmp401_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.volatile_reg = tmp401_regmap_is_volatile,
|
|
.reg_read = tmp401_reg_read,
|
|
.reg_write = tmp401_reg_write,
|
|
};
|
|
|
|
/* temperature conversion */
|
|
|
|
static int tmp401_register_to_temp(u16 reg, bool extended)
|
|
{
|
|
int temp = reg;
|
|
|
|
if (extended)
|
|
temp -= 64 * 256;
|
|
|
|
return DIV_ROUND_CLOSEST(temp * 125, 32);
|
|
}
|
|
|
|
static u16 tmp401_temp_to_register(long temp, bool extended, int zbits)
|
|
{
|
|
if (extended) {
|
|
temp = clamp_val(temp, -64000, 191000);
|
|
temp += 64000;
|
|
} else {
|
|
temp = clamp_val(temp, 0, 127000);
|
|
}
|
|
|
|
return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
|
|
}
|
|
|
|
/* hwmon API functions */
|
|
|
|
static const u8 tmp401_temp_reg_index[] = {
|
|
[hwmon_temp_input] = 0,
|
|
[hwmon_temp_min] = 1,
|
|
[hwmon_temp_max] = 2,
|
|
[hwmon_temp_crit] = 3,
|
|
[hwmon_temp_lowest] = 4,
|
|
[hwmon_temp_highest] = 5,
|
|
};
|
|
|
|
static const u8 tmp401_status_reg_index[] = {
|
|
[hwmon_temp_fault] = 0,
|
|
[hwmon_temp_min_alarm] = 1,
|
|
[hwmon_temp_max_alarm] = 2,
|
|
[hwmon_temp_crit_alarm] = 3,
|
|
};
|
|
|
|
static int tmp401_temp_read(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct tmp401_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
unsigned int regval;
|
|
int reg, ret;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_crit:
|
|
case hwmon_temp_lowest:
|
|
case hwmon_temp_highest:
|
|
reg = TMP401_TEMP_MSB[tmp401_temp_reg_index[attr]][channel];
|
|
ret = regmap_read(regmap, reg, ®val);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = tmp401_register_to_temp(regval, data->extended_range);
|
|
break;
|
|
case hwmon_temp_crit_hyst:
|
|
mutex_lock(&data->update_lock);
|
|
reg = TMP401_TEMP_MSB[3][channel];
|
|
ret = regmap_read(regmap, reg, ®val);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
*val = tmp401_register_to_temp(regval, data->extended_range);
|
|
ret = regmap_read(regmap, TMP401_TEMP_CRIT_HYST, ®val);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
*val -= regval * 1000;
|
|
unlock:
|
|
mutex_unlock(&data->update_lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case hwmon_temp_fault:
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_crit_alarm:
|
|
reg = TMP432_STATUS_REG[tmp401_status_reg_index[attr]];
|
|
ret = regmap_read(regmap, reg, ®val);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = !!(regval & BIT(channel));
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tmp401_temp_write(struct device *dev, u32 attr, int channel,
|
|
long val)
|
|
{
|
|
struct tmp401_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
unsigned int regval;
|
|
int reg, ret, temp;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (attr) {
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_crit:
|
|
reg = TMP401_TEMP_MSB[tmp401_temp_reg_index[attr]][channel];
|
|
regval = tmp401_temp_to_register(val, data->extended_range,
|
|
attr == hwmon_temp_crit ? 8 : 4);
|
|
ret = regmap_write(regmap, reg, regval);
|
|
break;
|
|
case hwmon_temp_crit_hyst:
|
|
if (data->extended_range)
|
|
val = clamp_val(val, -64000, 191000);
|
|
else
|
|
val = clamp_val(val, 0, 127000);
|
|
|
|
reg = TMP401_TEMP_MSB[3][channel];
|
|
ret = regmap_read(regmap, reg, ®val);
|
|
if (ret < 0)
|
|
break;
|
|
temp = tmp401_register_to_temp(regval, data->extended_range);
|
|
val = clamp_val(val, temp - 255000, temp);
|
|
regval = ((temp - val) + 500) / 1000;
|
|
ret = regmap_write(regmap, TMP401_TEMP_CRIT_HYST, regval);
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int tmp401_chip_read(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct tmp401_data *data = dev_get_drvdata(dev);
|
|
u32 regval;
|
|
int ret;
|
|
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
ret = regmap_read(data->regmap, TMP401_CONVERSION_RATE, ®val);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = (1 << (7 - regval)) * 125;
|
|
break;
|
|
case hwmon_chip_temp_reset_history:
|
|
*val = 0;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmp401_set_convrate(struct regmap *regmap, long val)
|
|
{
|
|
int rate;
|
|
|
|
/*
|
|
* For valid rates, interval can be calculated as
|
|
* interval = (1 << (7 - rate)) * 125;
|
|
* Rounded rate is therefore
|
|
* rate = 7 - __fls(interval * 4 / (125 * 3));
|
|
* Use clamp_val() to avoid overflows, and to ensure valid input
|
|
* for __fls.
|
|
*/
|
|
val = clamp_val(val, 125, 16000);
|
|
rate = 7 - __fls(val * 4 / (125 * 3));
|
|
return regmap_write(regmap, TMP401_CONVERSION_RATE, rate);
|
|
}
|
|
|
|
static int tmp401_chip_write(struct device *dev, u32 attr, int channel, long val)
|
|
{
|
|
struct tmp401_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
int err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
err = tmp401_set_convrate(regmap, val);
|
|
break;
|
|
case hwmon_chip_temp_reset_history:
|
|
if (val != 1) {
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
/*
|
|
* Reset history by writing any value to any of the
|
|
* minimum/maximum registers (0x30-0x37).
|
|
*/
|
|
err = regmap_write(regmap, 0x30, 0);
|
|
break;
|
|
default:
|
|
err = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tmp401_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
return tmp401_chip_read(dev, attr, channel, val);
|
|
case hwmon_temp:
|
|
return tmp401_temp_read(dev, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int tmp401_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
return tmp401_chip_write(dev, attr, channel, val);
|
|
case hwmon_temp:
|
|
return tmp401_temp_write(dev, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static umode_t tmp401_is_visible(const void *data, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
case hwmon_chip_temp_reset_history:
|
|
return 0644;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_crit_alarm:
|
|
case hwmon_temp_fault:
|
|
case hwmon_temp_lowest:
|
|
case hwmon_temp_highest:
|
|
return 0444;
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_crit:
|
|
case hwmon_temp_crit_hyst:
|
|
return 0644;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct hwmon_ops tmp401_ops = {
|
|
.is_visible = tmp401_is_visible,
|
|
.read = tmp401_read,
|
|
.write = tmp401_write,
|
|
};
|
|
|
|
/* chip initialization, detect, probe */
|
|
|
|
static int tmp401_init_client(struct tmp401_data *data)
|
|
{
|
|
struct regmap *regmap = data->regmap;
|
|
u32 config, config_orig;
|
|
int ret;
|
|
u32 val = 0;
|
|
s32 nfactor = 0;
|
|
|
|
/* Set conversion rate to 2 Hz */
|
|
ret = regmap_write(regmap, TMP401_CONVERSION_RATE, 5);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Start conversions (disable shutdown if necessary) */
|
|
ret = regmap_read(regmap, TMP401_CONFIG, &config);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
config_orig = config;
|
|
config &= ~TMP401_CONFIG_SHUTDOWN;
|
|
|
|
if (of_property_read_bool(data->client->dev.of_node, "ti,extended-range-enable")) {
|
|
/* Enable measurement over extended temperature range */
|
|
config |= TMP401_CONFIG_RANGE;
|
|
}
|
|
|
|
data->extended_range = !!(config & TMP401_CONFIG_RANGE);
|
|
|
|
if (config != config_orig) {
|
|
ret = regmap_write(regmap, TMP401_CONFIG, config);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(data->client->dev.of_node, "ti,n-factor", &nfactor);
|
|
if (!ret) {
|
|
if (data->kind == tmp401) {
|
|
dev_err(&data->client->dev, "ti,tmp401 does not support n-factor correction\n");
|
|
return -EINVAL;
|
|
}
|
|
if (nfactor < -128 || nfactor > 127) {
|
|
dev_err(&data->client->dev, "n-factor is invalid (%d)\n", nfactor);
|
|
return -EINVAL;
|
|
}
|
|
ret = regmap_write(regmap, TMP4XX_N_FACTOR_REG, (unsigned int)nfactor);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(data->client->dev.of_node, "ti,beta-compensation", &val);
|
|
if (!ret) {
|
|
if (data->kind == tmp401 || data->kind == tmp411) {
|
|
dev_err(&data->client->dev, "ti,tmp401 or ti,tmp411 does not support beta compensation\n");
|
|
return -EINVAL;
|
|
}
|
|
if (val > 15) {
|
|
dev_err(&data->client->dev, "beta-compensation is invalid (%u)\n", val);
|
|
return -EINVAL;
|
|
}
|
|
ret = regmap_write(regmap, TMP43X_BETA_RANGE, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmp401_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
enum chips kind;
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
u8 reg;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
/* Detect and identify the chip */
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
|
|
if (reg != TMP401_MANUFACTURER_ID)
|
|
return -ENODEV;
|
|
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
|
|
|
|
switch (reg) {
|
|
case TMP401_DEVICE_ID:
|
|
if (client->addr != 0x4c)
|
|
return -ENODEV;
|
|
kind = tmp401;
|
|
break;
|
|
case TMP411A_DEVICE_ID:
|
|
if (client->addr != 0x4c)
|
|
return -ENODEV;
|
|
kind = tmp411;
|
|
break;
|
|
case TMP411B_DEVICE_ID:
|
|
if (client->addr != 0x4d)
|
|
return -ENODEV;
|
|
kind = tmp411;
|
|
break;
|
|
case TMP411C_DEVICE_ID:
|
|
if (client->addr != 0x4e)
|
|
return -ENODEV;
|
|
kind = tmp411;
|
|
break;
|
|
case TMP431_DEVICE_ID:
|
|
if (client->addr != 0x4c && client->addr != 0x4d)
|
|
return -ENODEV;
|
|
kind = tmp431;
|
|
break;
|
|
case TMP432_DEVICE_ID:
|
|
if (client->addr != 0x4c && client->addr != 0x4d)
|
|
return -ENODEV;
|
|
kind = tmp432;
|
|
break;
|
|
case TMP435_DEVICE_ID:
|
|
kind = tmp435;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG);
|
|
if (reg & 0x1b)
|
|
return -ENODEV;
|
|
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE);
|
|
/* Datasheet says: 0x1-0x6 */
|
|
if (reg > 15)
|
|
return -ENODEV;
|
|
|
|
strscpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmp401_probe(struct i2c_client *client)
|
|
{
|
|
static const char * const names[] = {
|
|
"TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
|
|
};
|
|
struct device *dev = &client->dev;
|
|
struct hwmon_channel_info *info;
|
|
struct device *hwmon_dev;
|
|
struct tmp401_data *data;
|
|
int status;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
mutex_init(&data->update_lock);
|
|
data->kind = i2c_match_id(tmp401_id, client)->driver_data;
|
|
|
|
data->regmap = devm_regmap_init(dev, NULL, data, &tmp401_regmap_config);
|
|
if (IS_ERR(data->regmap))
|
|
return PTR_ERR(data->regmap);
|
|
|
|
/* initialize configuration data */
|
|
data->chip.ops = &tmp401_ops;
|
|
data->chip.info = data->info;
|
|
|
|
data->info[0] = &data->chip_info;
|
|
data->info[1] = &data->temp_info;
|
|
|
|
info = &data->chip_info;
|
|
info->type = hwmon_chip;
|
|
info->config = data->chip_channel_config;
|
|
|
|
data->chip_channel_config[0] = HWMON_C_UPDATE_INTERVAL;
|
|
|
|
info = &data->temp_info;
|
|
info->type = hwmon_temp;
|
|
info->config = data->temp_channel_config;
|
|
|
|
data->temp_channel_config[0] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
|
|
HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM;
|
|
data->temp_channel_config[1] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
|
|
HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT;
|
|
|
|
if (data->kind == tmp411) {
|
|
data->temp_channel_config[0] |= HWMON_T_HIGHEST | HWMON_T_LOWEST;
|
|
data->temp_channel_config[1] |= HWMON_T_HIGHEST | HWMON_T_LOWEST;
|
|
data->chip_channel_config[0] |= HWMON_C_TEMP_RESET_HISTORY;
|
|
}
|
|
|
|
if (data->kind == tmp432) {
|
|
data->temp_channel_config[2] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
|
|
HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT;
|
|
}
|
|
|
|
/* Initialize the TMP401 chip */
|
|
status = tmp401_init_client(data);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data,
|
|
&data->chip, NULL);
|
|
if (IS_ERR(hwmon_dev))
|
|
return PTR_ERR(hwmon_dev);
|
|
|
|
dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id __maybe_unused tmp4xx_of_match[] = {
|
|
{ .compatible = "ti,tmp401", },
|
|
{ .compatible = "ti,tmp411", },
|
|
{ .compatible = "ti,tmp431", },
|
|
{ .compatible = "ti,tmp432", },
|
|
{ .compatible = "ti,tmp435", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tmp4xx_of_match);
|
|
|
|
static struct i2c_driver tmp401_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "tmp401",
|
|
.of_match_table = of_match_ptr(tmp4xx_of_match),
|
|
},
|
|
.probe = tmp401_probe,
|
|
.id_table = tmp401_id,
|
|
.detect = tmp401_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(tmp401_driver);
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
|
|
MODULE_LICENSE("GPL");
|