linux/arch/sh
Geert Uytterhoeven b78412b830 sh: sh7722: remove nonexistent GPIO_PTQ7 to fix pinctrl registration
Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration",
v2.

Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails
with:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices.  Apparently
GPIO_PTQ7 was defined in the enum, but never used.  If enum values are
defined, but never used, pinmux_pins[] contains (zero-filled) holes.
Hence such entries are treated as pin zero, which was registered before,
and pinctrl registration fails.

I can't see how this ever worked, as at the time of commit f5e25ae52f
("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in
drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and
drivers/pinctrl/core.c already had the check.

Some scripting revealed a few more broken drivers:
  - sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV.
  - sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with
    PINMUX_GPIO().

Patch 1 fixes the issue on sh7722, and was tested.  Patches 3-4 should
fix the issue on the other 3 SoCs, but was untested due to lack of
hardware.

This patch (of 4):

On sh7722/Migo-R, pinctrl registration fails with:

    sh-pfc pfc-sh7722: pin 0 already registered
    sh-pfc pfc-sh7722: error during pin registration
    sh-pfc pfc-sh7722: could not register: -22
    sh-pfc: probe of pfc-sh7722 failed with error -22

pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array
initializers, where the GPIO_* enums serve as indices.  As GPIO_PTQ7 is
defined in the enum, but never used, pinmux_pins[] contains a
(zero-filled) hole.  Hence this entry is treated as pin zero, which was
registered before, and pinctrl registration fails.

According to the datasheet, port PTQ7 does not exist.  Hence remove
GPIO_PTQ7 from the enum to fix this.

Link: http://lkml.kernel.org/r/1505205657-18012-2-git-send-email-geert+renesas@glider.be
Fixes: 8d7b5b0af7 ("sh: Add sh7722 pinmux code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Magnus Damm <magnus.damm@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03 17:54:24 -07:00
..
boards mtd: nand: Rename nand.h into rawnand.h 2017-08-13 10:11:49 +02:00
boot treewide: Remove remaining executable attributes from source files 2017-02-25 12:12:50 -08:00
cchips genirq: Remove irq argument from irq flow handlers 2015-09-16 15:47:51 +02:00
configs sh: defconfig: cleanup from old Kconfig options 2017-09-08 18:26:51 -07:00
drivers dma-mapping updates for 4.14: 2017-09-12 13:30:06 -07:00
include sh: sh7722: remove nonexistent GPIO_PTQ7 to fix pinctrl registration 2017-10-03 17:54:24 -07:00
kernel Kbuild thin archives updates for v4.13 2017-07-07 15:11:12 -07:00
lib sh: New gcc support 2016-03-17 19:45:44 +00:00
lib64 sh64: Kill off old exception debugging helpers. 2012-06-14 14:12:18 +09:00
math-emu sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h> 2017-03-02 08:42:29 +01:00
mm sh: move inline before return type 2017-07-12 16:26:04 -07:00
oprofile Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
tools sh: Add RSK2+SH7269 board 2012-05-10 17:20:01 +09:00
Kconfig drivers: dma-mapping: allow dma_common_mmap() for NOMMU 2017-06-30 10:03:07 -07:00
Kconfig.cpu arch/sh: remove depends on CONFIG_EXPERIMENTAL 2013-01-21 14:43:13 -08:00
Kconfig.debug sh: dwarf unwinder depends on SHcompact. 2012-03-30 19:31:22 +09:00
Makefile sh: Use full path in KBUILD_IMAGE definition 2017-03-20 22:42:20 +09:00