linux/drivers/mfd/88pm800.c
Aidan MacDonald 0eeb2ddcb4 mfd: 88pm800: Replace irqchip mask_invert with unmask_base
Remove use of the deprecated mask_invert flag. Inverted mask
registers (where a '1' bit enables an IRQ) can be described more
directly as an unmask register.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221112151835.39059-2-aidanmacdonald.0x0@gmail.com
2022-12-07 13:28:13 +00:00

620 lines
15 KiB
C

/*
* Base driver for Marvell 88PM800
*
* Copyright (C) 2012 Marvell International Ltd.
* Haojian Zhuang <haojian.zhuang@marvell.com>
* Joseph(Yossi) Hanin <yhanin@marvell.com>
* Qiao Zhou <zhouqiao@marvell.com>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
#include <linux/mfd/88pm80x.h>
#include <linux/slab.h>
/* Interrupt Registers */
#define PM800_INT_STATUS1 (0x05)
#define PM800_ONKEY_INT_STS1 (1 << 0)
#define PM800_EXTON_INT_STS1 (1 << 1)
#define PM800_CHG_INT_STS1 (1 << 2)
#define PM800_BAT_INT_STS1 (1 << 3)
#define PM800_RTC_INT_STS1 (1 << 4)
#define PM800_CLASSD_OC_INT_STS1 (1 << 5)
#define PM800_INT_STATUS2 (0x06)
#define PM800_VBAT_INT_STS2 (1 << 0)
#define PM800_VSYS_INT_STS2 (1 << 1)
#define PM800_VCHG_INT_STS2 (1 << 2)
#define PM800_TINT_INT_STS2 (1 << 3)
#define PM800_GPADC0_INT_STS2 (1 << 4)
#define PM800_TBAT_INT_STS2 (1 << 5)
#define PM800_GPADC2_INT_STS2 (1 << 6)
#define PM800_GPADC3_INT_STS2 (1 << 7)
#define PM800_INT_STATUS3 (0x07)
#define PM800_INT_STATUS4 (0x08)
#define PM800_GPIO0_INT_STS4 (1 << 0)
#define PM800_GPIO1_INT_STS4 (1 << 1)
#define PM800_GPIO2_INT_STS4 (1 << 2)
#define PM800_GPIO3_INT_STS4 (1 << 3)
#define PM800_GPIO4_INT_STS4 (1 << 4)
#define PM800_INT_ENA_1 (0x09)
#define PM800_ONKEY_INT_ENA1 (1 << 0)
#define PM800_EXTON_INT_ENA1 (1 << 1)
#define PM800_CHG_INT_ENA1 (1 << 2)
#define PM800_BAT_INT_ENA1 (1 << 3)
#define PM800_RTC_INT_ENA1 (1 << 4)
#define PM800_CLASSD_OC_INT_ENA1 (1 << 5)
#define PM800_INT_ENA_2 (0x0A)
#define PM800_VBAT_INT_ENA2 (1 << 0)
#define PM800_VSYS_INT_ENA2 (1 << 1)
#define PM800_VCHG_INT_ENA2 (1 << 2)
#define PM800_TINT_INT_ENA2 (1 << 3)
#define PM800_INT_ENA_3 (0x0B)
#define PM800_GPADC0_INT_ENA3 (1 << 0)
#define PM800_GPADC1_INT_ENA3 (1 << 1)
#define PM800_GPADC2_INT_ENA3 (1 << 2)
#define PM800_GPADC3_INT_ENA3 (1 << 3)
#define PM800_GPADC4_INT_ENA3 (1 << 4)
#define PM800_INT_ENA_4 (0x0C)
#define PM800_GPIO0_INT_ENA4 (1 << 0)
#define PM800_GPIO1_INT_ENA4 (1 << 1)
#define PM800_GPIO2_INT_ENA4 (1 << 2)
#define PM800_GPIO3_INT_ENA4 (1 << 3)
#define PM800_GPIO4_INT_ENA4 (1 << 4)
/* number of INT_ENA & INT_STATUS regs */
#define PM800_INT_REG_NUM (4)
/* Interrupt Number in 88PM800 */
enum {
PM800_IRQ_ONKEY, /*EN1b0 *//*0 */
PM800_IRQ_EXTON, /*EN1b1 */
PM800_IRQ_CHG, /*EN1b2 */
PM800_IRQ_BAT, /*EN1b3 */
PM800_IRQ_RTC, /*EN1b4 */
PM800_IRQ_CLASSD, /*EN1b5 *//*5 */
PM800_IRQ_VBAT, /*EN2b0 */
PM800_IRQ_VSYS, /*EN2b1 */
PM800_IRQ_VCHG, /*EN2b2 */
PM800_IRQ_TINT, /*EN2b3 */
PM800_IRQ_GPADC0, /*EN3b0 *//*10 */
PM800_IRQ_GPADC1, /*EN3b1 */
PM800_IRQ_GPADC2, /*EN3b2 */
PM800_IRQ_GPADC3, /*EN3b3 */
PM800_IRQ_GPADC4, /*EN3b4 */
PM800_IRQ_GPIO0, /*EN4b0 *//*15 */
PM800_IRQ_GPIO1, /*EN4b1 */
PM800_IRQ_GPIO2, /*EN4b2 */
PM800_IRQ_GPIO3, /*EN4b3 */
PM800_IRQ_GPIO4, /*EN4b4 *//*19 */
PM800_MAX_IRQ,
};
/* PM800: generation identification number */
#define PM800_CHIP_GEN_ID_NUM 0x3
static const struct i2c_device_id pm80x_id_table[] = {
{"88PM800", 0},
{} /* NULL terminated */
};
MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
static const struct resource rtc_resources[] = {
DEFINE_RES_IRQ_NAMED(PM800_IRQ_RTC, "88pm80x-rtc"),
};
static struct mfd_cell rtc_devs[] = {
{
.name = "88pm80x-rtc",
.num_resources = ARRAY_SIZE(rtc_resources),
.resources = &rtc_resources[0],
.id = -1,
},
};
static struct resource onkey_resources[] = {
DEFINE_RES_IRQ_NAMED(PM800_IRQ_ONKEY, "88pm80x-onkey"),
};
static const struct mfd_cell onkey_devs[] = {
{
.name = "88pm80x-onkey",
.num_resources = 1,
.resources = &onkey_resources[0],
.id = -1,
},
};
static const struct mfd_cell regulator_devs[] = {
{
.name = "88pm80x-regulator",
.id = -1,
},
};
static const struct regmap_irq pm800_irqs[] = {
/* INT0 */
[PM800_IRQ_ONKEY] = {
.mask = PM800_ONKEY_INT_ENA1,
},
[PM800_IRQ_EXTON] = {
.mask = PM800_EXTON_INT_ENA1,
},
[PM800_IRQ_CHG] = {
.mask = PM800_CHG_INT_ENA1,
},
[PM800_IRQ_BAT] = {
.mask = PM800_BAT_INT_ENA1,
},
[PM800_IRQ_RTC] = {
.mask = PM800_RTC_INT_ENA1,
},
[PM800_IRQ_CLASSD] = {
.mask = PM800_CLASSD_OC_INT_ENA1,
},
/* INT1 */
[PM800_IRQ_VBAT] = {
.reg_offset = 1,
.mask = PM800_VBAT_INT_ENA2,
},
[PM800_IRQ_VSYS] = {
.reg_offset = 1,
.mask = PM800_VSYS_INT_ENA2,
},
[PM800_IRQ_VCHG] = {
.reg_offset = 1,
.mask = PM800_VCHG_INT_ENA2,
},
[PM800_IRQ_TINT] = {
.reg_offset = 1,
.mask = PM800_TINT_INT_ENA2,
},
/* INT2 */
[PM800_IRQ_GPADC0] = {
.reg_offset = 2,
.mask = PM800_GPADC0_INT_ENA3,
},
[PM800_IRQ_GPADC1] = {
.reg_offset = 2,
.mask = PM800_GPADC1_INT_ENA3,
},
[PM800_IRQ_GPADC2] = {
.reg_offset = 2,
.mask = PM800_GPADC2_INT_ENA3,
},
[PM800_IRQ_GPADC3] = {
.reg_offset = 2,
.mask = PM800_GPADC3_INT_ENA3,
},
[PM800_IRQ_GPADC4] = {
.reg_offset = 2,
.mask = PM800_GPADC4_INT_ENA3,
},
/* INT3 */
[PM800_IRQ_GPIO0] = {
.reg_offset = 3,
.mask = PM800_GPIO0_INT_ENA4,
},
[PM800_IRQ_GPIO1] = {
.reg_offset = 3,
.mask = PM800_GPIO1_INT_ENA4,
},
[PM800_IRQ_GPIO2] = {
.reg_offset = 3,
.mask = PM800_GPIO2_INT_ENA4,
},
[PM800_IRQ_GPIO3] = {
.reg_offset = 3,
.mask = PM800_GPIO3_INT_ENA4,
},
[PM800_IRQ_GPIO4] = {
.reg_offset = 3,
.mask = PM800_GPIO4_INT_ENA4,
},
};
static int device_gpadc_init(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata)
{
struct pm80x_subchip *subchip = chip->subchip;
struct regmap *map = subchip->regmap_gpadc;
int data = 0, mask = 0, ret = 0;
if (!map) {
dev_warn(chip->dev,
"Warning: gpadc regmap is not available!\n");
return -EINVAL;
}
/*
* initialize GPADC without activating it turn on GPADC
* measurments
*/
ret = regmap_update_bits(map,
PM800_GPADC_MISC_CONFIG2,
PM800_GPADC_MISC_GPFSM_EN,
PM800_GPADC_MISC_GPFSM_EN);
if (ret < 0)
goto out;
/*
* This function configures the ADC as requires for
* CP implementation.CP does not "own" the ADC configuration
* registers and relies on AP.
* Reason: enable automatic ADC measurements needed
* for CP to get VBAT and RF temperature readings.
*/
ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN1,
PM800_MEAS_EN1_VBAT, PM800_MEAS_EN1_VBAT);
if (ret < 0)
goto out;
ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN2,
(PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN),
(PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN));
if (ret < 0)
goto out;
/*
* the defult of PM800 is GPADC operates at 100Ks/s rate
* and Number of GPADC slots with active current bias prior
* to GPADC sampling = 1 slot for all GPADCs set for
* Temprature mesurmants
*/
mask = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
if (pdata && (pdata->batt_det == 0))
data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
else
data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN2 |
PM800_GPADC_GP_BIAS_EN3);
ret = regmap_update_bits(map, PM800_GP_BIAS_ENA1, mask, data);
if (ret < 0)
goto out;
dev_info(chip->dev, "pm800 device_gpadc_init: Done\n");
return 0;
out:
dev_info(chip->dev, "pm800 device_gpadc_init: Failed!\n");
return ret;
}
static int device_onkey_init(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata)
{
int ret;
ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
NULL);
if (ret) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
return ret;
}
return 0;
}
static int device_rtc_init(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata)
{
int ret;
if (pdata) {
rtc_devs[0].platform_data = pdata->rtc;
rtc_devs[0].pdata_size =
pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0;
}
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
if (ret) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
return ret;
}
return 0;
}
static int device_regulator_init(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata)
{
int ret;
ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
if (ret) {
dev_err(chip->dev, "Failed to add regulator subdev\n");
return ret;
}
return 0;
}
static int device_irq_init_800(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_ONESHOT;
int data, mask, ret = -EINVAL;
if (!map || !chip->irq) {
dev_err(chip->dev, "incorrect parameters\n");
return -EINVAL;
}
/*
* irq_mode defines the way of clearing interrupt. it's read-clear by
* default.
*/
mask =
PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
PM800_WAKEUP2_INT_MASK;
data = PM800_WAKEUP2_INT_CLEAR;
ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
if (ret < 0)
goto out;
ret =
regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
chip->regmap_irq_chip, &chip->irq_data);
out:
return ret;
}
static void device_irq_exit_800(struct pm80x_chip *chip)
{
regmap_del_irq_chip(chip->irq, chip->irq_data);
}
static struct regmap_irq_chip pm800_irq_chip = {
.name = "88pm800",
.irqs = pm800_irqs,
.num_irqs = ARRAY_SIZE(pm800_irqs),
.num_regs = 4,
.status_base = PM800_INT_STATUS1,
.unmask_base = PM800_INT_ENA_1,
.ack_base = PM800_INT_STATUS1,
};
static int pm800_pages_init(struct pm80x_chip *chip)
{
struct pm80x_subchip *subchip;
struct i2c_client *client = chip->client;
int ret = 0;
subchip = chip->subchip;
if (!subchip || !subchip->power_page_addr || !subchip->gpadc_page_addr)
return -ENODEV;
/* PM800 block power page */
subchip->power_page = i2c_new_dummy_device(client->adapter,
subchip->power_page_addr);
if (IS_ERR(subchip->power_page)) {
ret = PTR_ERR(subchip->power_page);
goto out;
}
subchip->regmap_power = devm_regmap_init_i2c(subchip->power_page,
&pm80x_regmap_config);
if (IS_ERR(subchip->regmap_power)) {
ret = PTR_ERR(subchip->regmap_power);
dev_err(chip->dev,
"Failed to allocate regmap_power: %d\n", ret);
goto out;
}
i2c_set_clientdata(subchip->power_page, chip);
/* PM800 block GPADC */
subchip->gpadc_page = i2c_new_dummy_device(client->adapter,
subchip->gpadc_page_addr);
if (IS_ERR(subchip->gpadc_page)) {
ret = PTR_ERR(subchip->gpadc_page);
goto out;
}
subchip->regmap_gpadc = devm_regmap_init_i2c(subchip->gpadc_page,
&pm80x_regmap_config);
if (IS_ERR(subchip->regmap_gpadc)) {
ret = PTR_ERR(subchip->regmap_gpadc);
dev_err(chip->dev,
"Failed to allocate regmap_gpadc: %d\n", ret);
goto out;
}
i2c_set_clientdata(subchip->gpadc_page, chip);
out:
return ret;
}
static void pm800_pages_exit(struct pm80x_chip *chip)
{
struct pm80x_subchip *subchip;
subchip = chip->subchip;
if (subchip && subchip->power_page)
i2c_unregister_device(subchip->power_page);
if (subchip && subchip->gpadc_page)
i2c_unregister_device(subchip->gpadc_page);
}
static int device_800_init(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata)
{
int ret;
unsigned int val;
/*
* alarm wake up bit will be clear in device_irq_init(),
* read before that
*/
ret = regmap_read(chip->regmap, PM800_RTC_CONTROL, &val);
if (ret < 0) {
dev_err(chip->dev, "Failed to read RTC register: %d\n", ret);
goto out;
}
if (val & PM800_ALARM_WAKEUP) {
if (pdata && pdata->rtc)
pdata->rtc->rtc_wakeup = 1;
}
ret = device_gpadc_init(chip, pdata);
if (ret < 0) {
dev_err(chip->dev, "[%s]Failed to init gpadc\n", __func__);
goto out;
}
chip->regmap_irq_chip = &pm800_irq_chip;
ret = device_irq_init_800(chip);
if (ret < 0) {
dev_err(chip->dev, "[%s]Failed to init pm800 irq\n", __func__);
goto out;
}
ret = device_onkey_init(chip, pdata);
if (ret) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
goto out_dev;
}
ret = device_rtc_init(chip, pdata);
if (ret) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out;
}
ret = device_regulator_init(chip, pdata);
if (ret) {
dev_err(chip->dev, "Failed to add regulators subdev\n");
goto out;
}
return 0;
out_dev:
mfd_remove_devices(chip->dev);
device_irq_exit_800(chip);
out:
return ret;
}
static int pm800_probe(struct i2c_client *client)
{
int ret = 0;
struct pm80x_chip *chip;
struct pm80x_platform_data *pdata = dev_get_platdata(&client->dev);
struct pm80x_subchip *subchip;
ret = pm80x_init(client);
if (ret) {
dev_err(&client->dev, "pm800_init fail\n");
goto out_init;
}
chip = i2c_get_clientdata(client);
/* init subchip for PM800 */
subchip =
devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
GFP_KERNEL);
if (!subchip) {
ret = -ENOMEM;
goto err_subchip_alloc;
}
/* pm800 has 2 addtional pages to support power and gpadc. */
subchip->power_page_addr = client->addr + 1;
subchip->gpadc_page_addr = client->addr + 2;
chip->subchip = subchip;
ret = pm800_pages_init(chip);
if (ret) {
dev_err(&client->dev, "pm800_pages_init failed!\n");
goto err_device_init;
}
ret = device_800_init(chip, pdata);
if (ret) {
dev_err(chip->dev, "Failed to initialize 88pm800 devices\n");
goto err_device_init;
}
if (pdata && pdata->plat_config)
pdata->plat_config(chip, pdata);
return 0;
err_device_init:
pm800_pages_exit(chip);
err_subchip_alloc:
pm80x_deinit();
out_init:
return ret;
}
static void pm800_remove(struct i2c_client *client)
{
struct pm80x_chip *chip = i2c_get_clientdata(client);
mfd_remove_devices(chip->dev);
device_irq_exit_800(chip);
pm800_pages_exit(chip);
pm80x_deinit();
}
static struct i2c_driver pm800_driver = {
.driver = {
.name = "88PM800",
.pm = pm_sleep_ptr(&pm80x_pm_ops),
},
.probe_new = pm800_probe,
.remove = pm800_remove,
.id_table = pm80x_id_table,
};
static int __init pm800_i2c_init(void)
{
return i2c_add_driver(&pm800_driver);
}
subsys_initcall(pm800_i2c_init);
static void __exit pm800_i2c_exit(void)
{
i2c_del_driver(&pm800_driver);
}
module_exit(pm800_i2c_exit);
MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM800");
MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
MODULE_LICENSE("GPL");