mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-04 17:44:14 +08:00
e1c1cfed54
The stop4 idle state on POWER9 is a deep idle state which loses hypervisor resources, but whose latency is low enough that it can be exposed via cpuidle. Until now, the deep idle states which lose hypervisor resources (eg: winkle) were only exposed via CPU-Hotplug. Hence currently on wakeup from such states, barring a few SPRs which need to be restored to their older value, rest of the SPRS are reinitialized to their values corresponding to that at boot time. When stop4 is used in the context of cpuidle, we want these additional SPRs to be restored to their older value, to ensure that the context on the CPU coming back from idle is same as it was before going idle. In this patch, we define a SPR save area in PACA (since we have used up the volatile register space in the stack) and on POWER9, we restore SPRN_PID, SPRN_LDBAR, SPRN_FSCR, SPRN_HFSCR, SPRN_MMCRA, SPRN_MMCR1, SPRN_MMCR2 to the values they had before entering stop. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
926 lines
24 KiB
ArmAsm
926 lines
24 KiB
ArmAsm
/*
|
|
* This file contains idle entry/exit functions for POWER7,
|
|
* POWER8 and POWER9 CPUs.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/threads.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/ppc-opcode.h>
|
|
#include <asm/hw_irq.h>
|
|
#include <asm/kvm_book3s_asm.h>
|
|
#include <asm/opal.h>
|
|
#include <asm/cpuidle.h>
|
|
#include <asm/exception-64s.h>
|
|
#include <asm/book3s/64/mmu-hash.h>
|
|
#include <asm/mmu.h>
|
|
|
|
#undef DEBUG
|
|
|
|
/*
|
|
* Use unused space in the interrupt stack to save and restore
|
|
* registers for winkle support.
|
|
*/
|
|
#define _MMCR0 GPR0
|
|
#define _SDR1 GPR3
|
|
#define _PTCR GPR3
|
|
#define _RPR GPR4
|
|
#define _SPURR GPR5
|
|
#define _PURR GPR6
|
|
#define _TSCR GPR7
|
|
#define _DSCR GPR8
|
|
#define _AMOR GPR9
|
|
#define _WORT GPR10
|
|
#define _WORC GPR11
|
|
#define _LPCR GPR12
|
|
|
|
#define PSSCR_EC_ESL_MASK_SHIFTED (PSSCR_EC | PSSCR_ESL) >> 16
|
|
|
|
.text
|
|
|
|
/*
|
|
* Used by threads before entering deep idle states. Saves SPRs
|
|
* in interrupt stack frame
|
|
*/
|
|
save_sprs_to_stack:
|
|
/*
|
|
* Note all register i.e per-core, per-subcore or per-thread is saved
|
|
* here since any thread in the core might wake up first
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
/*
|
|
* Note - SDR1 is dropped in Power ISA v3. Hence not restoring
|
|
* SDR1 here
|
|
*/
|
|
mfspr r3,SPRN_PTCR
|
|
std r3,_PTCR(r1)
|
|
mfspr r3,SPRN_LPCR
|
|
std r3,_LPCR(r1)
|
|
FTR_SECTION_ELSE
|
|
mfspr r3,SPRN_SDR1
|
|
std r3,_SDR1(r1)
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
|
|
mfspr r3,SPRN_RPR
|
|
std r3,_RPR(r1)
|
|
mfspr r3,SPRN_SPURR
|
|
std r3,_SPURR(r1)
|
|
mfspr r3,SPRN_PURR
|
|
std r3,_PURR(r1)
|
|
mfspr r3,SPRN_TSCR
|
|
std r3,_TSCR(r1)
|
|
mfspr r3,SPRN_DSCR
|
|
std r3,_DSCR(r1)
|
|
mfspr r3,SPRN_AMOR
|
|
std r3,_AMOR(r1)
|
|
mfspr r3,SPRN_WORT
|
|
std r3,_WORT(r1)
|
|
mfspr r3,SPRN_WORC
|
|
std r3,_WORC(r1)
|
|
/*
|
|
* On POWER9, there are idle states such as stop4, invoked via cpuidle,
|
|
* that lose hypervisor resources. In such cases, we need to save
|
|
* additional SPRs before entering those idle states so that they can
|
|
* be restored to their older values on wakeup from the idle state.
|
|
*
|
|
* On POWER8, the only such deep idle state is winkle which is used
|
|
* only in the context of CPU-Hotplug, where these additional SPRs are
|
|
* reinitiazed to a sane value. Hence there is no need to save/restore
|
|
* these SPRs.
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
blr
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
|
|
|
|
power9_save_additional_sprs:
|
|
mfspr r3, SPRN_PID
|
|
mfspr r4, SPRN_LDBAR
|
|
std r3, STOP_PID(r13)
|
|
std r4, STOP_LDBAR(r13)
|
|
|
|
mfspr r3, SPRN_FSCR
|
|
mfspr r4, SPRN_HFSCR
|
|
std r3, STOP_FSCR(r13)
|
|
std r4, STOP_HFSCR(r13)
|
|
|
|
mfspr r3, SPRN_MMCRA
|
|
mfspr r4, SPRN_MMCR1
|
|
std r3, STOP_MMCRA(r13)
|
|
std r4, STOP_MMCR1(r13)
|
|
|
|
mfspr r3, SPRN_MMCR2
|
|
std r3, STOP_MMCR2(r13)
|
|
blr
|
|
|
|
power9_restore_additional_sprs:
|
|
ld r3,_LPCR(r1)
|
|
ld r4, STOP_PID(r13)
|
|
mtspr SPRN_LPCR,r3
|
|
mtspr SPRN_PID, r4
|
|
|
|
ld r3, STOP_LDBAR(r13)
|
|
ld r4, STOP_FSCR(r13)
|
|
mtspr SPRN_LDBAR, r3
|
|
mtspr SPRN_FSCR, r4
|
|
|
|
ld r3, STOP_HFSCR(r13)
|
|
ld r4, STOP_MMCRA(r13)
|
|
mtspr SPRN_HFSCR, r3
|
|
mtspr SPRN_MMCRA, r4
|
|
/* We have already restored PACA_MMCR0 */
|
|
ld r3, STOP_MMCR1(r13)
|
|
ld r4, STOP_MMCR2(r13)
|
|
mtspr SPRN_MMCR1, r3
|
|
mtspr SPRN_MMCR2, r4
|
|
blr
|
|
|
|
/*
|
|
* Used by threads when the lock bit of core_idle_state is set.
|
|
* Threads will spin in HMT_LOW until the lock bit is cleared.
|
|
* r14 - pointer to core_idle_state
|
|
* r15 - used to load contents of core_idle_state
|
|
* r9 - used as a temporary variable
|
|
*/
|
|
|
|
core_idle_lock_held:
|
|
HMT_LOW
|
|
3: lwz r15,0(r14)
|
|
andis. r15,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
bne 3b
|
|
HMT_MEDIUM
|
|
lwarx r15,0,r14
|
|
andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
bne- core_idle_lock_held
|
|
blr
|
|
|
|
/*
|
|
* Pass requested state in r3:
|
|
* r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8
|
|
* - Requested PSSCR value in POWER9
|
|
*
|
|
* Address of idle handler to branch to in realmode in r4
|
|
*/
|
|
pnv_powersave_common:
|
|
/* Use r3 to pass state nap/sleep/winkle */
|
|
/* NAP is a state loss, we create a regs frame on the
|
|
* stack, fill it up with the state we care about and
|
|
* stick a pointer to it in PACAR1. We really only
|
|
* need to save PC, some CR bits and the NV GPRs,
|
|
* but for now an interrupt frame will do.
|
|
*/
|
|
mtctr r4
|
|
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,-INT_FRAME_SIZE(r1)
|
|
std r0,_LINK(r1)
|
|
std r0,_NIP(r1)
|
|
|
|
/* We haven't lost state ... yet */
|
|
li r0,0
|
|
stb r0,PACA_NAPSTATELOST(r13)
|
|
|
|
/* Continue saving state */
|
|
SAVE_GPR(2, r1)
|
|
SAVE_NVGPRS(r1)
|
|
mfcr r5
|
|
std r5,_CCR(r1)
|
|
std r1,PACAR1(r13)
|
|
|
|
/*
|
|
* Go to real mode to do the nap, as required by the architecture.
|
|
* Also, we need to be in real mode before setting hwthread_state,
|
|
* because as soon as we do that, another thread can switch
|
|
* the MMU context to the guest.
|
|
*/
|
|
LOAD_REG_IMMEDIATE(r7, MSR_IDLE)
|
|
mtmsrd r7,0
|
|
bctr
|
|
|
|
.globl pnv_enter_arch207_idle_mode
|
|
pnv_enter_arch207_idle_mode:
|
|
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
|
|
/* Tell KVM we're entering idle */
|
|
li r4,KVM_HWTHREAD_IN_IDLE
|
|
/******************************************************/
|
|
/* N O T E W E L L ! ! ! N O T E W E L L */
|
|
/* The following store to HSTATE_HWTHREAD_STATE(r13) */
|
|
/* MUST occur in real mode, i.e. with the MMU off, */
|
|
/* and the MMU must stay off until we clear this flag */
|
|
/* and test HSTATE_HWTHREAD_REQ(r13) in */
|
|
/* pnv_powersave_wakeup in this file. */
|
|
/* The reason is that another thread can switch the */
|
|
/* MMU to a guest context whenever this flag is set */
|
|
/* to KVM_HWTHREAD_IN_IDLE, and if the MMU was on, */
|
|
/* that would potentially cause this thread to start */
|
|
/* executing instructions from guest memory in */
|
|
/* hypervisor mode, leading to a host crash or data */
|
|
/* corruption, or worse. */
|
|
/******************************************************/
|
|
stb r4,HSTATE_HWTHREAD_STATE(r13)
|
|
#endif
|
|
stb r3,PACA_THREAD_IDLE_STATE(r13)
|
|
cmpwi cr3,r3,PNV_THREAD_SLEEP
|
|
bge cr3,2f
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
|
|
/* No return */
|
|
2:
|
|
/* Sleep or winkle */
|
|
lbz r7,PACA_THREAD_MASK(r13)
|
|
ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
|
|
li r5,0
|
|
beq cr3,3f
|
|
lis r5,PNV_CORE_IDLE_WINKLE_COUNT@h
|
|
3:
|
|
lwarx_loop1:
|
|
lwarx r15,0,r14
|
|
|
|
andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
bnel- core_idle_lock_held
|
|
|
|
add r15,r15,r5 /* Add if winkle */
|
|
andc r15,r15,r7 /* Clear thread bit */
|
|
|
|
andi. r9,r15,PNV_CORE_IDLE_THREAD_BITS
|
|
|
|
/*
|
|
* If cr0 = 0, then current thread is the last thread of the core entering
|
|
* sleep. Last thread needs to execute the hardware bug workaround code if
|
|
* required by the platform.
|
|
* Make the workaround call unconditionally here. The below branch call is
|
|
* patched out when the idle states are discovered if the platform does not
|
|
* require it.
|
|
*/
|
|
.global pnv_fastsleep_workaround_at_entry
|
|
pnv_fastsleep_workaround_at_entry:
|
|
beq fastsleep_workaround_at_entry
|
|
|
|
stwcx. r15,0,r14
|
|
bne- lwarx_loop1
|
|
isync
|
|
|
|
common_enter: /* common code for all the threads entering sleep or winkle */
|
|
bgt cr3,enter_winkle
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
|
|
|
|
fastsleep_workaround_at_entry:
|
|
oris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
stwcx. r15,0,r14
|
|
bne- lwarx_loop1
|
|
isync
|
|
|
|
/* Fast sleep workaround */
|
|
li r3,1
|
|
li r4,1
|
|
bl opal_config_cpu_idle_state
|
|
|
|
/* Unlock */
|
|
xoris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
lwsync
|
|
stw r15,0(r14)
|
|
b common_enter
|
|
|
|
enter_winkle:
|
|
bl save_sprs_to_stack
|
|
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
|
|
|
|
/*
|
|
* r3 - PSSCR value corresponding to the requested stop state.
|
|
*/
|
|
power_enter_stop:
|
|
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
|
|
/* Tell KVM we're entering idle */
|
|
li r4,KVM_HWTHREAD_IN_IDLE
|
|
/* DO THIS IN REAL MODE! See comment above. */
|
|
stb r4,HSTATE_HWTHREAD_STATE(r13)
|
|
#endif
|
|
/*
|
|
* Check if we are executing the lite variant with ESL=EC=0
|
|
*/
|
|
andis. r4,r3,PSSCR_EC_ESL_MASK_SHIFTED
|
|
clrldi r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */
|
|
bne .Lhandle_esl_ec_set
|
|
IDLE_STATE_ENTER_SEQ(PPC_STOP)
|
|
li r3,0 /* Since we didn't lose state, return 0 */
|
|
|
|
/*
|
|
* pnv_wakeup_noloss() expects r12 to contain the SRR1 value so
|
|
* it can determine if the wakeup reason is an HMI in
|
|
* CHECK_HMI_INTERRUPT.
|
|
*
|
|
* However, when we wakeup with ESL=0, SRR1 will not contain the wakeup
|
|
* reason, so there is no point setting r12 to SRR1.
|
|
*
|
|
* Further, we clear r12 here, so that we don't accidentally enter the
|
|
* HMI in pnv_wakeup_noloss() if the value of r12[42:45] == WAKE_HMI.
|
|
*/
|
|
li r12, 0
|
|
b pnv_wakeup_noloss
|
|
|
|
.Lhandle_esl_ec_set:
|
|
/*
|
|
* POWER9 DD2 can incorrectly set PMAO when waking up after a
|
|
* state-loss idle. Saving and restoring MMCR0 over idle is a
|
|
* workaround.
|
|
*/
|
|
mfspr r4,SPRN_MMCR0
|
|
std r4,_MMCR0(r1)
|
|
|
|
/*
|
|
* Check if the requested state is a deep idle state.
|
|
*/
|
|
LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
|
|
ld r4,ADDROFF(pnv_first_deep_stop_state)(r5)
|
|
cmpd r3,r4
|
|
bge .Lhandle_deep_stop
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)
|
|
.Lhandle_deep_stop:
|
|
/*
|
|
* Entering deep idle state.
|
|
* Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to
|
|
* stack and enter stop
|
|
*/
|
|
lbz r7,PACA_THREAD_MASK(r13)
|
|
ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
|
|
|
|
lwarx_loop_stop:
|
|
lwarx r15,0,r14
|
|
andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
bnel- core_idle_lock_held
|
|
andc r15,r15,r7 /* Clear thread bit */
|
|
|
|
stwcx. r15,0,r14
|
|
bne- lwarx_loop_stop
|
|
isync
|
|
|
|
bl save_sprs_to_stack
|
|
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP)
|
|
|
|
/*
|
|
* Entered with MSR[EE]=0 and no soft-masked interrupts pending.
|
|
* r3 contains desired idle state (PNV_THREAD_NAP/SLEEP/WINKLE).
|
|
*/
|
|
_GLOBAL(power7_idle_insn)
|
|
/* Now check if user or arch enabled NAP mode */
|
|
LOAD_REG_ADDR(r4, pnv_enter_arch207_idle_mode)
|
|
b pnv_powersave_common
|
|
|
|
#define CHECK_HMI_INTERRUPT \
|
|
BEGIN_FTR_SECTION_NESTED(66); \
|
|
rlwinm r0,r12,45-31,0xf; /* extract wake reason field (P8) */ \
|
|
FTR_SECTION_ELSE_NESTED(66); \
|
|
rlwinm r0,r12,45-31,0xe; /* P7 wake reason field is 3 bits */ \
|
|
ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
|
|
cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
|
|
bne+ 20f; \
|
|
/* Invoke opal call to handle hmi */ \
|
|
ld r2,PACATOC(r13); \
|
|
ld r1,PACAR1(r13); \
|
|
std r3,ORIG_GPR3(r1); /* Save original r3 */ \
|
|
li r3,0; /* NULL argument */ \
|
|
bl hmi_exception_realmode; \
|
|
nop; \
|
|
ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
|
|
20: nop;
|
|
|
|
/*
|
|
* Entered with MSR[EE]=0 and no soft-masked interrupts pending.
|
|
* r3 contains desired PSSCR register value.
|
|
*/
|
|
_GLOBAL(power9_idle_stop)
|
|
std r3, PACA_REQ_PSSCR(r13)
|
|
mtspr SPRN_PSSCR,r3
|
|
LOAD_REG_ADDR(r4,power_enter_stop)
|
|
b pnv_powersave_common
|
|
/* No return */
|
|
|
|
/*
|
|
* On waking up from stop 0,1,2 with ESL=1 on POWER9 DD1,
|
|
* HSPRG0 will be set to the HSPRG0 value of one of the
|
|
* threads in this core. Thus the value we have in r13
|
|
* may not be this thread's paca pointer.
|
|
*
|
|
* Fortunately, the TIR remains invariant. Since this thread's
|
|
* paca pointer is recorded in all its sibling's paca, we can
|
|
* correctly recover this thread's paca pointer if we
|
|
* know the index of this thread in the core.
|
|
*
|
|
* This index can be obtained from the TIR.
|
|
*
|
|
* i.e, thread's position in the core = TIR.
|
|
* If this value is i, then this thread's paca is
|
|
* paca->thread_sibling_pacas[i].
|
|
*/
|
|
power9_dd1_recover_paca:
|
|
mfspr r4, SPRN_TIR
|
|
/*
|
|
* Since each entry in thread_sibling_pacas is 8 bytes
|
|
* we need to left-shift by 3 bits. Thus r4 = i * 8
|
|
*/
|
|
sldi r4, r4, 3
|
|
/* Get &paca->thread_sibling_pacas[0] in r5 */
|
|
ld r5, PACA_SIBLING_PACA_PTRS(r13)
|
|
/* Load paca->thread_sibling_pacas[i] into r13 */
|
|
ldx r13, r4, r5
|
|
SET_PACA(r13)
|
|
/*
|
|
* Indicate that we have lost NVGPR state
|
|
* which needs to be restored from the stack.
|
|
*/
|
|
li r3, 1
|
|
stb r3,PACA_NAPSTATELOST(r13)
|
|
blr
|
|
|
|
/*
|
|
* Called from machine check handler for powersave wakeups.
|
|
* Low level machine check processing has already been done. Now just
|
|
* go through the wake up path to get everything in order.
|
|
*
|
|
* r3 - The original SRR1 value.
|
|
* Original SRR[01] have been clobbered.
|
|
* MSR_RI is clear.
|
|
*/
|
|
.global pnv_powersave_wakeup_mce
|
|
pnv_powersave_wakeup_mce:
|
|
/* Set cr3 for pnv_powersave_wakeup */
|
|
rlwinm r11,r3,47-31,30,31
|
|
cmpwi cr3,r11,2
|
|
|
|
/*
|
|
* Now put the original SRR1 with SRR1_WAKEMCE_RESVD as the wake
|
|
* reason into r12, which allows reuse of the system reset wakeup
|
|
* code without being mistaken for another type of wakeup.
|
|
*/
|
|
oris r12,r3,SRR1_WAKEMCE_RESVD@h
|
|
|
|
b pnv_powersave_wakeup
|
|
|
|
/*
|
|
* Called from reset vector for powersave wakeups.
|
|
* cr3 - set to gt if waking up with partial/complete hypervisor state loss
|
|
* r12 - SRR1
|
|
*/
|
|
.global pnv_powersave_wakeup
|
|
pnv_powersave_wakeup:
|
|
ld r2, PACATOC(r13)
|
|
|
|
BEGIN_FTR_SECTION
|
|
BEGIN_FTR_SECTION_NESTED(70)
|
|
bl power9_dd1_recover_paca
|
|
END_FTR_SECTION_NESTED_IFSET(CPU_FTR_POWER9_DD1, 70)
|
|
bl pnv_restore_hyp_resource_arch300
|
|
FTR_SECTION_ELSE
|
|
bl pnv_restore_hyp_resource_arch207
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
|
|
|
|
li r0,PNV_THREAD_RUNNING
|
|
stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */
|
|
|
|
mr r3,r12
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
|
|
li r0,KVM_HWTHREAD_IN_KERNEL
|
|
stb r0,HSTATE_HWTHREAD_STATE(r13)
|
|
/* Order setting hwthread_state vs. testing hwthread_req */
|
|
sync
|
|
lbz r0,HSTATE_HWTHREAD_REQ(r13)
|
|
cmpwi r0,0
|
|
beq 1f
|
|
b kvm_start_guest
|
|
1:
|
|
#endif
|
|
|
|
/* Return SRR1 from power7_nap() */
|
|
blt cr3,pnv_wakeup_noloss
|
|
b pnv_wakeup_loss
|
|
|
|
/*
|
|
* Check whether we have woken up with hypervisor state loss.
|
|
* If yes, restore hypervisor state and return back to link.
|
|
*
|
|
* cr3 - set to gt if waking up with partial/complete hypervisor state loss
|
|
*/
|
|
pnv_restore_hyp_resource_arch300:
|
|
/*
|
|
* Workaround for POWER9, if we lost resources, the ERAT
|
|
* might have been mixed up and needs flushing. We also need
|
|
* to reload MMCR0 (see comment above).
|
|
*/
|
|
blt cr3,1f
|
|
PPC_INVALIDATE_ERAT
|
|
ld r1,PACAR1(r13)
|
|
ld r4,_MMCR0(r1)
|
|
mtspr SPRN_MMCR0,r4
|
|
1:
|
|
/*
|
|
* POWER ISA 3. Use PSSCR to determine if we
|
|
* are waking up from deep idle state
|
|
*/
|
|
LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
|
|
ld r4,ADDROFF(pnv_first_deep_stop_state)(r5)
|
|
|
|
BEGIN_FTR_SECTION_NESTED(71)
|
|
/*
|
|
* Assume that we are waking up from the state
|
|
* same as the Requested Level (RL) in the PSSCR
|
|
* which are Bits 60-63
|
|
*/
|
|
ld r5,PACA_REQ_PSSCR(r13)
|
|
rldicl r5,r5,0,60
|
|
FTR_SECTION_ELSE_NESTED(71)
|
|
/*
|
|
* 0-3 bits correspond to Power-Saving Level Status
|
|
* which indicates the idle state we are waking up from
|
|
*/
|
|
mfspr r5, SPRN_PSSCR
|
|
rldicl r5,r5,4,60
|
|
ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_POWER9_DD1, 71)
|
|
cmpd cr4,r5,r4
|
|
bge cr4,pnv_wakeup_tb_loss /* returns to caller */
|
|
|
|
blr /* Waking up without hypervisor state loss. */
|
|
|
|
/* Same calling convention as arch300 */
|
|
pnv_restore_hyp_resource_arch207:
|
|
/*
|
|
* POWER ISA 2.07 or less.
|
|
* Check if we slept with sleep or winkle.
|
|
*/
|
|
lbz r4,PACA_THREAD_IDLE_STATE(r13)
|
|
cmpwi cr2,r4,PNV_THREAD_NAP
|
|
bgt cr2,pnv_wakeup_tb_loss /* Either sleep or Winkle */
|
|
|
|
/*
|
|
* We fall through here if PACA_THREAD_IDLE_STATE shows we are waking
|
|
* up from nap. At this stage CR3 shouldn't contains 'gt' since that
|
|
* indicates we are waking with hypervisor state loss from nap.
|
|
*/
|
|
bgt cr3,.
|
|
|
|
blr /* Waking up without hypervisor state loss */
|
|
|
|
/*
|
|
* Called if waking up from idle state which can cause either partial or
|
|
* complete hyp state loss.
|
|
* In POWER8, called if waking up from fastsleep or winkle
|
|
* In POWER9, called if waking up from stop state >= pnv_first_deep_stop_state
|
|
*
|
|
* r13 - PACA
|
|
* cr3 - gt if waking up with partial/complete hypervisor state loss
|
|
*
|
|
* If ISA300:
|
|
* cr4 - gt or eq if waking up from complete hypervisor state loss.
|
|
*
|
|
* If ISA207:
|
|
* r4 - PACA_THREAD_IDLE_STATE
|
|
*/
|
|
pnv_wakeup_tb_loss:
|
|
ld r1,PACAR1(r13)
|
|
/*
|
|
* Before entering any idle state, the NVGPRs are saved in the stack.
|
|
* If there was a state loss, or PACA_NAPSTATELOST was set, then the
|
|
* NVGPRs are restored. If we are here, it is likely that state is lost,
|
|
* but not guaranteed -- neither ISA207 nor ISA300 tests to reach
|
|
* here are the same as the test to restore NVGPRS:
|
|
* PACA_THREAD_IDLE_STATE test for ISA207, PSSCR test for ISA300,
|
|
* and SRR1 test for restoring NVGPRs.
|
|
*
|
|
* We are about to clobber NVGPRs now, so set NAPSTATELOST to
|
|
* guarantee they will always be restored. This might be tightened
|
|
* with careful reading of specs (particularly for ISA300) but this
|
|
* is already a slow wakeup path and it's simpler to be safe.
|
|
*/
|
|
li r0,1
|
|
stb r0,PACA_NAPSTATELOST(r13)
|
|
|
|
/*
|
|
*
|
|
* Save SRR1 and LR in NVGPRs as they might be clobbered in
|
|
* opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required
|
|
* to determine the wakeup reason if we branch to kvm_start_guest. LR
|
|
* is required to return back to reset vector after hypervisor state
|
|
* restore is complete.
|
|
*/
|
|
mr r19,r12
|
|
mr r18,r4
|
|
mflr r17
|
|
BEGIN_FTR_SECTION
|
|
CHECK_HMI_INTERRUPT
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
|
|
|
|
ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
|
|
lbz r7,PACA_THREAD_MASK(r13)
|
|
|
|
/*
|
|
* Take the core lock to synchronize against other threads.
|
|
*
|
|
* Lock bit is set in one of the 2 cases-
|
|
* a. In the sleep/winkle enter path, the last thread is executing
|
|
* fastsleep workaround code.
|
|
* b. In the wake up path, another thread is executing fastsleep
|
|
* workaround undo code or resyncing timebase or restoring context
|
|
* In either case loop until the lock bit is cleared.
|
|
*/
|
|
1:
|
|
lwarx r15,0,r14
|
|
andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
bnel- core_idle_lock_held
|
|
oris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
stwcx. r15,0,r14
|
|
bne- 1b
|
|
isync
|
|
|
|
andi. r9,r15,PNV_CORE_IDLE_THREAD_BITS
|
|
cmpwi cr2,r9,0
|
|
|
|
/*
|
|
* At this stage
|
|
* cr2 - eq if first thread to wakeup in core
|
|
* cr3- gt if waking up with partial/complete hypervisor state loss
|
|
* ISA300:
|
|
* cr4 - gt or eq if waking up from complete hypervisor state loss.
|
|
*/
|
|
|
|
BEGIN_FTR_SECTION
|
|
/*
|
|
* Were we in winkle?
|
|
* If yes, check if all threads were in winkle, decrement our
|
|
* winkle count, set all thread winkle bits if all were in winkle.
|
|
* Check if our thread has a winkle bit set, and set cr4 accordingly
|
|
* (to match ISA300, above). Pseudo-code for core idle state
|
|
* transitions for ISA207 is as follows (everything happens atomically
|
|
* due to store conditional and/or lock bit):
|
|
*
|
|
* nap_idle() { }
|
|
* nap_wake() { }
|
|
*
|
|
* sleep_idle()
|
|
* {
|
|
* core_idle_state &= ~thread_in_core
|
|
* }
|
|
*
|
|
* sleep_wake()
|
|
* {
|
|
* bool first_in_core, first_in_subcore;
|
|
*
|
|
* first_in_core = (core_idle_state & IDLE_THREAD_BITS) == 0;
|
|
* first_in_subcore = (core_idle_state & SUBCORE_SIBLING_MASK) == 0;
|
|
*
|
|
* core_idle_state |= thread_in_core;
|
|
* }
|
|
*
|
|
* winkle_idle()
|
|
* {
|
|
* core_idle_state &= ~thread_in_core;
|
|
* core_idle_state += 1 << WINKLE_COUNT_SHIFT;
|
|
* }
|
|
*
|
|
* winkle_wake()
|
|
* {
|
|
* bool first_in_core, first_in_subcore, winkle_state_lost;
|
|
*
|
|
* first_in_core = (core_idle_state & IDLE_THREAD_BITS) == 0;
|
|
* first_in_subcore = (core_idle_state & SUBCORE_SIBLING_MASK) == 0;
|
|
*
|
|
* core_idle_state |= thread_in_core;
|
|
*
|
|
* if ((core_idle_state & WINKLE_MASK) == (8 << WINKLE_COUNT_SIHFT))
|
|
* core_idle_state |= THREAD_WINKLE_BITS;
|
|
* core_idle_state -= 1 << WINKLE_COUNT_SHIFT;
|
|
*
|
|
* winkle_state_lost = core_idle_state &
|
|
* (thread_in_core << WINKLE_THREAD_SHIFT);
|
|
* core_idle_state &= ~(thread_in_core << WINKLE_THREAD_SHIFT);
|
|
* }
|
|
*
|
|
*/
|
|
cmpwi r18,PNV_THREAD_WINKLE
|
|
bne 2f
|
|
andis. r9,r15,PNV_CORE_IDLE_WINKLE_COUNT_ALL_BIT@h
|
|
subis r15,r15,PNV_CORE_IDLE_WINKLE_COUNT@h
|
|
beq 2f
|
|
ori r15,r15,PNV_CORE_IDLE_THREAD_WINKLE_BITS /* all were winkle */
|
|
2:
|
|
/* Shift thread bit to winkle mask, then test if this thread is set,
|
|
* and remove it from the winkle bits */
|
|
slwi r8,r7,8
|
|
and r8,r8,r15
|
|
andc r15,r15,r8
|
|
cmpwi cr4,r8,1 /* cr4 will be gt if our bit is set, lt if not */
|
|
|
|
lbz r4,PACA_SUBCORE_SIBLING_MASK(r13)
|
|
and r4,r4,r15
|
|
cmpwi r4,0 /* Check if first in subcore */
|
|
|
|
or r15,r15,r7 /* Set thread bit */
|
|
beq first_thread_in_subcore
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
|
|
|
|
or r15,r15,r7 /* Set thread bit */
|
|
beq cr2,first_thread_in_core
|
|
|
|
/* Not first thread in core or subcore to wake up */
|
|
b clear_lock
|
|
|
|
first_thread_in_subcore:
|
|
/*
|
|
* If waking up from sleep, subcore state is not lost. Hence
|
|
* skip subcore state restore
|
|
*/
|
|
blt cr4,subcore_state_restored
|
|
|
|
/* Restore per-subcore state */
|
|
ld r4,_SDR1(r1)
|
|
mtspr SPRN_SDR1,r4
|
|
|
|
ld r4,_RPR(r1)
|
|
mtspr SPRN_RPR,r4
|
|
ld r4,_AMOR(r1)
|
|
mtspr SPRN_AMOR,r4
|
|
|
|
subcore_state_restored:
|
|
/*
|
|
* Check if the thread is also the first thread in the core. If not,
|
|
* skip to clear_lock.
|
|
*/
|
|
bne cr2,clear_lock
|
|
|
|
first_thread_in_core:
|
|
|
|
/*
|
|
* First thread in the core waking up from any state which can cause
|
|
* partial or complete hypervisor state loss. It needs to
|
|
* call the fastsleep workaround code if the platform requires it.
|
|
* Call it unconditionally here. The below branch instruction will
|
|
* be patched out if the platform does not have fastsleep or does not
|
|
* require the workaround. Patching will be performed during the
|
|
* discovery of idle-states.
|
|
*/
|
|
.global pnv_fastsleep_workaround_at_exit
|
|
pnv_fastsleep_workaround_at_exit:
|
|
b fastsleep_workaround_at_exit
|
|
|
|
timebase_resync:
|
|
/*
|
|
* Use cr3 which indicates that we are waking up with atleast partial
|
|
* hypervisor state loss to determine if TIMEBASE RESYNC is needed.
|
|
*/
|
|
ble cr3,.Ltb_resynced
|
|
/* Time base re-sync */
|
|
bl opal_resync_timebase;
|
|
/*
|
|
* If waking up from sleep (POWER8), per core state
|
|
* is not lost, skip to clear_lock.
|
|
*/
|
|
.Ltb_resynced:
|
|
blt cr4,clear_lock
|
|
|
|
/*
|
|
* First thread in the core to wake up and its waking up with
|
|
* complete hypervisor state loss. Restore per core hypervisor
|
|
* state.
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
ld r4,_PTCR(r1)
|
|
mtspr SPRN_PTCR,r4
|
|
ld r4,_RPR(r1)
|
|
mtspr SPRN_RPR,r4
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
|
|
|
|
ld r4,_TSCR(r1)
|
|
mtspr SPRN_TSCR,r4
|
|
ld r4,_WORC(r1)
|
|
mtspr SPRN_WORC,r4
|
|
|
|
clear_lock:
|
|
xoris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h
|
|
lwsync
|
|
stw r15,0(r14)
|
|
|
|
common_exit:
|
|
/*
|
|
* Common to all threads.
|
|
*
|
|
* If waking up from sleep, hypervisor state is not lost. Hence
|
|
* skip hypervisor state restore.
|
|
*/
|
|
blt cr4,hypervisor_state_restored
|
|
|
|
/* Waking up from winkle */
|
|
|
|
BEGIN_MMU_FTR_SECTION
|
|
b no_segments
|
|
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
|
|
/* Restore SLB from PACA */
|
|
ld r8,PACA_SLBSHADOWPTR(r13)
|
|
|
|
.rept SLB_NUM_BOLTED
|
|
li r3, SLBSHADOW_SAVEAREA
|
|
LDX_BE r5, r8, r3
|
|
addi r3, r3, 8
|
|
LDX_BE r6, r8, r3
|
|
andis. r7,r5,SLB_ESID_V@h
|
|
beq 1f
|
|
slbmte r6,r5
|
|
1: addi r8,r8,16
|
|
.endr
|
|
no_segments:
|
|
|
|
/* Restore per thread state */
|
|
|
|
ld r4,_SPURR(r1)
|
|
mtspr SPRN_SPURR,r4
|
|
ld r4,_PURR(r1)
|
|
mtspr SPRN_PURR,r4
|
|
ld r4,_DSCR(r1)
|
|
mtspr SPRN_DSCR,r4
|
|
ld r4,_WORT(r1)
|
|
mtspr SPRN_WORT,r4
|
|
|
|
/* Call cur_cpu_spec->cpu_restore() */
|
|
LOAD_REG_ADDR(r4, cur_cpu_spec)
|
|
ld r4,0(r4)
|
|
ld r12,CPU_SPEC_RESTORE(r4)
|
|
#ifdef PPC64_ELF_ABI_v1
|
|
ld r12,0(r12)
|
|
#endif
|
|
mtctr r12
|
|
bctrl
|
|
|
|
/*
|
|
* On POWER9, we can come here on wakeup from a cpuidle stop state.
|
|
* Hence restore the additional SPRs to the saved value.
|
|
*
|
|
* On POWER8, we come here only on winkle. Since winkle is used
|
|
* only in the case of CPU-Hotplug, we don't need to restore
|
|
* the additional SPRs.
|
|
*/
|
|
BEGIN_FTR_SECTION
|
|
bl power9_restore_additional_sprs
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
|
|
hypervisor_state_restored:
|
|
|
|
mr r12,r19
|
|
mtlr r17
|
|
blr /* return to pnv_powersave_wakeup */
|
|
|
|
fastsleep_workaround_at_exit:
|
|
li r3,1
|
|
li r4,0
|
|
bl opal_config_cpu_idle_state
|
|
b timebase_resync
|
|
|
|
/*
|
|
* R3 here contains the value that will be returned to the caller
|
|
* of power7_nap.
|
|
* R12 contains SRR1 for CHECK_HMI_INTERRUPT.
|
|
*/
|
|
.global pnv_wakeup_loss
|
|
pnv_wakeup_loss:
|
|
ld r1,PACAR1(r13)
|
|
BEGIN_FTR_SECTION
|
|
CHECK_HMI_INTERRUPT
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
|
|
REST_NVGPRS(r1)
|
|
REST_GPR(2, r1)
|
|
ld r4,PACAKMSR(r13)
|
|
ld r5,_LINK(r1)
|
|
ld r6,_CCR(r1)
|
|
addi r1,r1,INT_FRAME_SIZE
|
|
mtlr r5
|
|
mtcr r6
|
|
mtmsrd r4
|
|
blr
|
|
|
|
/*
|
|
* R3 here contains the value that will be returned to the caller
|
|
* of power7_nap.
|
|
* R12 contains SRR1 for CHECK_HMI_INTERRUPT.
|
|
*/
|
|
pnv_wakeup_noloss:
|
|
lbz r0,PACA_NAPSTATELOST(r13)
|
|
cmpwi r0,0
|
|
bne pnv_wakeup_loss
|
|
ld r1,PACAR1(r13)
|
|
BEGIN_FTR_SECTION
|
|
CHECK_HMI_INTERRUPT
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
|
|
ld r4,PACAKMSR(r13)
|
|
ld r5,_NIP(r1)
|
|
ld r6,_CCR(r1)
|
|
addi r1,r1,INT_FRAME_SIZE
|
|
mtlr r5
|
|
mtcr r6
|
|
mtmsrd r4
|
|
blr
|