mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
b44a3d2a85
As we've enabled multiplatform kernels on ARM, and greatly done away with
the contents under arch/arm/mach-*, there's still need for SoC-related
drivers to go somewhere.
Many of them go in through other driver trees, but we still have
drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
that might be shared between ARM and ARM64 (or just in general makes
sense to not have under the architecture directory).
This branch contains mostly such code:
- Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate
with power management blocks on these SoCs for use by clock, regulator and
bus frequency drivers.
- Allwinner Reduced Serial Bus driver, again used to communicate with PMICs.
- Drivers for ARM's SCPI (System Control Processor). Not to be confused with
PSCI (Power State Coordination Interface). SCPI is used to communicate with
the assistant embedded cores doing power management, and we have yet to see
how many of them will implement this for their hardware vs abstracting in
other ways (or not at all like in the past).
- To make confusion between SCPI and PSCI more likely, this release also
includes an update of PSCI to interface version 1.0.
- Rockchip support for power domains.
- A driver to talk to the firmware on Raspberry Pi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dm+I
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"As we've enabled multiplatform kernels on ARM, and greatly done away
with the contents under arch/arm/mach-*, there's still need for
SoC-related drivers to go somewhere.
Many of them go in through other driver trees, but we still have
drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
that might be shared between ARM and ARM64 (or just in general makes
sense to not have under the architecture directory).
This branch contains mostly such code:
- Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
communicate with power management blocks on these SoCs for use by
clock, regulator and bus frequency drivers.
- Allwinner Reduced Serial Bus driver, again used to communicate with
PMICs.
- Drivers for ARM's SCPI (System Control Processor). Not to be
confused with PSCI (Power State Coordination Interface). SCPI is
used to communicate with the assistant embedded cores doing power
management, and we have yet to see how many of them will implement
this for their hardware vs abstracting in other ways (or not at all
like in the past).
- To make confusion between SCPI and PSCI more likely, this release
also includes an update of PSCI to interface version 1.0.
- Rockchip support for power domains.
- A driver to talk to the firmware on Raspberry Pi"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
soc: qcom: smd-rpm: Correct size of outgoing message
bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
ARM: bcm2835: add mutual inclusion protection
drivers: psci: make PSCI 1.0 functions initialization version dependent
dt-bindings: Correct paths in Rockchip power domains binding document
soc: rockchip: power-domain: don't try to print the clock name in error case
soc: qcom/smem: add HWSPINLOCK dependency
clk: berlin: add cpuclk
ARM: berlin: dts: add CLKID_CPU for BG2Q
ARM: bcm2835: Add the Raspberry Pi firmware driver
soc: qcom: smem: Move RPM message ram out of smem DT node
soc: qcom: smd-rpm: Correct the active vs sleep state flagging
soc: qcom: smd: delete unneeded of_node_put
firmware: qcom-scm: build for correct architecture level
soc: qcom: smd: Correct SMEM items for upper channels
qcom-scm: add missing prototype for qcom_scm_is_available()
qcom-scm: fix endianess issue in __qcom_scm_is_call_available
soc: qcom: smd: Reject send of too big packets
soc: qcom: smd: Handle big endian CPUs
...
257 lines
6.7 KiB
Plaintext
257 lines
6.7 KiB
Plaintext
#
|
|
# ARM CPU Frequency scaling drivers
|
|
#
|
|
|
|
# big LITTLE core layer and glue drivers
|
|
config ARM_BIG_LITTLE_CPUFREQ
|
|
tristate "Generic ARM big LITTLE CPUfreq driver"
|
|
depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
|
|
select PM_OPP
|
|
help
|
|
This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
|
|
|
|
config ARM_DT_BL_CPUFREQ
|
|
tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
|
|
depends on ARM_BIG_LITTLE_CPUFREQ && OF
|
|
help
|
|
This enables probing via DT for Generic CPUfreq driver for ARM
|
|
big.LITTLE platform. This gets frequency tables from DT.
|
|
|
|
config ARM_VEXPRESS_SPC_CPUFREQ
|
|
tristate "Versatile Express SPC based CPUfreq driver"
|
|
depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
|
|
help
|
|
This add the CPUfreq driver support for Versatile Express
|
|
big.LITTLE platforms using SPC for power management.
|
|
|
|
config ARM_EXYNOS5440_CPUFREQ
|
|
tristate "SAMSUNG EXYNOS5440"
|
|
depends on SOC_EXYNOS5440
|
|
depends on HAVE_CLK && OF
|
|
select PM_OPP
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver for Samsung EXYNOS5440
|
|
SoC. The nature of exynos5440 clock controller is
|
|
different than previous exynos controllers so not using
|
|
the common exynos framework.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_HIGHBANK_CPUFREQ
|
|
tristate "Calxeda Highbank-based"
|
|
depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
|
|
default m
|
|
help
|
|
This adds the CPUFreq driver for Calxeda Highbank SoC
|
|
based boards.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_HISI_ACPU_CPUFREQ
|
|
tristate "Hisilicon ACPU CPUfreq driver"
|
|
depends on ARCH_HISI && CPUFREQ_DT
|
|
select PM_OPP
|
|
help
|
|
This enables the hisilicon ACPU CPUfreq driver.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_IMX6Q_CPUFREQ
|
|
tristate "Freescale i.MX6 cpufreq support"
|
|
depends on ARCH_MXC
|
|
depends on REGULATOR_ANATOP
|
|
select PM_OPP
|
|
help
|
|
This adds cpufreq driver support for Freescale i.MX6 series SoCs.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_INTEGRATOR
|
|
tristate "CPUfreq driver for ARM Integrator CPUs"
|
|
depends on ARCH_INTEGRATOR
|
|
default y
|
|
help
|
|
This enables the CPUfreq driver for ARM Integrator CPUs.
|
|
If in doubt, say Y.
|
|
|
|
config ARM_KIRKWOOD_CPUFREQ
|
|
def_bool MACH_KIRKWOOD
|
|
help
|
|
This adds the CPUFreq driver for Marvell Kirkwood
|
|
SoCs.
|
|
|
|
config ARM_MT8173_CPUFREQ
|
|
bool "Mediatek MT8173 CPUFreq support"
|
|
depends on ARCH_MEDIATEK && REGULATOR
|
|
depends on !CPU_THERMAL || THERMAL=y
|
|
select PM_OPP
|
|
help
|
|
This adds the CPUFreq driver support for Mediatek MT8173 SoC.
|
|
|
|
config ARM_OMAP2PLUS_CPUFREQ
|
|
bool "TI OMAP2+"
|
|
depends on ARCH_OMAP2PLUS
|
|
default ARCH_OMAP2PLUS
|
|
|
|
config ARM_S3C_CPUFREQ
|
|
bool
|
|
help
|
|
Internal configuration node for common cpufreq on Samsung SoC
|
|
|
|
config ARM_S3C24XX_CPUFREQ
|
|
bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
|
|
depends on ARCH_S3C24XX
|
|
select ARM_S3C_CPUFREQ
|
|
help
|
|
This enables the CPUfreq driver for the Samsung S3C24XX family
|
|
of CPUs.
|
|
|
|
For details, take a look at <file:Documentation/cpu-freq>.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S3C24XX_CPUFREQ_DEBUG
|
|
bool "Debug CPUfreq Samsung driver core"
|
|
depends on ARM_S3C24XX_CPUFREQ
|
|
help
|
|
Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
|
|
|
|
config ARM_S3C24XX_CPUFREQ_IODEBUG
|
|
bool "Debug CPUfreq Samsung driver IO timing"
|
|
depends on ARM_S3C24XX_CPUFREQ
|
|
help
|
|
Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
|
|
|
|
config ARM_S3C24XX_CPUFREQ_DEBUGFS
|
|
bool "Export debugfs for CPUFreq"
|
|
depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
|
|
help
|
|
Export status information via debugfs.
|
|
|
|
config ARM_S3C2410_CPUFREQ
|
|
bool
|
|
depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
|
|
select S3C2410_CPUFREQ_UTILS
|
|
help
|
|
CPU Frequency scaling support for S3C2410
|
|
|
|
config ARM_S3C2412_CPUFREQ
|
|
bool
|
|
depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
|
|
default y
|
|
select S3C2412_IOTIMING
|
|
help
|
|
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
|
|
|
|
config ARM_S3C2416_CPUFREQ
|
|
bool "S3C2416 CPU Frequency scaling support"
|
|
depends on CPU_S3C2416
|
|
help
|
|
This adds the CPUFreq driver for the Samsung S3C2416 and
|
|
S3C2450 SoC. The S3C2416 supports changing the rate of the
|
|
armdiv clock source and also entering a so called dynamic
|
|
voltage scaling mode in which it is possible to reduce the
|
|
core voltage of the CPU.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S3C2416_CPUFREQ_VCORESCALE
|
|
bool "Allow voltage scaling for S3C2416 arm core"
|
|
depends on ARM_S3C2416_CPUFREQ && REGULATOR
|
|
help
|
|
Enable CPU voltage scaling when entering the dvs mode.
|
|
It uses information gathered through existing hardware and
|
|
tests but not documented in any datasheet.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S3C2440_CPUFREQ
|
|
bool "S3C2440/S3C2442 CPU Frequency scaling support"
|
|
depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
|
|
select S3C2410_CPUFREQ_UTILS
|
|
default y
|
|
help
|
|
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
|
|
|
|
config ARM_S3C64XX_CPUFREQ
|
|
bool "Samsung S3C64XX"
|
|
depends on CPU_S3C6410
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver for Samsung S3C6410 SoC.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_S5PV210_CPUFREQ
|
|
bool "Samsung S5PV210 and S5PC110"
|
|
depends on CPU_S5PV210
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver for Samsung S5PV210 and
|
|
S5PC110 SoCs.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ARM_SA1100_CPUFREQ
|
|
bool
|
|
|
|
config ARM_SA1110_CPUFREQ
|
|
bool
|
|
|
|
config ARM_SCPI_CPUFREQ
|
|
tristate "SCPI based CPUfreq driver"
|
|
depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL
|
|
help
|
|
This adds the CPUfreq driver support for ARM big.LITTLE platforms
|
|
using SCPI protocol for CPU power management.
|
|
|
|
This driver uses SCPI Message Protocol driver to interact with the
|
|
firmware providing the CPU DVFS functionality.
|
|
|
|
config ARM_SPEAR_CPUFREQ
|
|
bool "SPEAr CPUFreq support"
|
|
depends on PLAT_SPEAR
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver support for SPEAr SOCs.
|
|
|
|
config ARM_TEGRA20_CPUFREQ
|
|
bool "Tegra20 CPUFreq support"
|
|
depends on ARCH_TEGRA
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver support for Tegra20 SOCs.
|
|
|
|
config ARM_TEGRA124_CPUFREQ
|
|
tristate "Tegra124 CPUFreq support"
|
|
depends on ARCH_TEGRA && CPUFREQ_DT
|
|
default y
|
|
help
|
|
This adds the CPUFreq driver support for Tegra124 SOCs.
|
|
|
|
config ARM_PXA2xx_CPUFREQ
|
|
tristate "Intel PXA2xx CPUfreq driver"
|
|
depends on PXA27x || PXA25x
|
|
help
|
|
This add the CPUFreq driver support for Intel PXA2xx SOCs.
|
|
|
|
If in doubt, say N.
|
|
|
|
config ACPI_CPPC_CPUFREQ
|
|
tristate "CPUFreq driver based on the ACPI CPPC spec"
|
|
depends on ACPI
|
|
select ACPI_CPPC_LIB
|
|
default n
|
|
help
|
|
This adds a CPUFreq driver which uses CPPC methods
|
|
as described in the ACPIv5.1 spec. CPPC stands for
|
|
Collaborative Processor Performance Controls. It
|
|
is based on an abstract continuous scale of CPU
|
|
performance values which allows the remote power
|
|
processor to flexibly optimize for power and
|
|
performance. CPPC relies on power management firmware
|
|
support for its operation.
|
|
|
|
If in doubt, say N.
|