0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-27 04:54:41 +08:00
linux/drivers/spi/spi-mpc512x-psc.c
Amit Kumar Mahapatra via Alsa-devel 9e264f3f85
spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver
Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi
Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver
Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part
Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-11 12:34:01 +00:00

539 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* MPC512x PSC in SPI mode driver.
*
* Copyright (C) 2007,2008 Freescale Semiconductor Inc.
* Original port from 52xx driver:
* Hongjun Chen <hong-jun.chen@freescale.com>
*
* Fork of mpc52xx_psc_spi.c:
* Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <asm/mpc52xx_psc.h>
enum {
TYPE_MPC5121,
TYPE_MPC5125,
};
/*
* This macro abstracts the differences in the PSC register layout between
* MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc).
*/
#define psc_addr(mps, regname) ({ \
void *__ret = NULL; \
switch (mps->type) { \
case TYPE_MPC5121: { \
struct mpc52xx_psc __iomem *psc = mps->psc; \
__ret = &psc->regname; \
}; \
break; \
case TYPE_MPC5125: { \
struct mpc5125_psc __iomem *psc = mps->psc; \
__ret = &psc->regname; \
}; \
break; \
} \
__ret; })
struct mpc512x_psc_spi {
/* driver internal data */
int type;
void __iomem *psc;
struct mpc512x_psc_fifo __iomem *fifo;
unsigned int irq;
u8 bits_per_word;
u32 mclk_rate;
struct completion txisrdone;
};
/* controller state */
struct mpc512x_psc_spi_cs {
int bits_per_word;
int speed_hz;
};
/* set clock freq, clock ramp, bits per work
* if t is NULL then reset the values to the default values
*/
static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi,
struct spi_transfer *t)
{
struct mpc512x_psc_spi_cs *cs = spi->controller_state;
cs->speed_hz = (t && t->speed_hz)
? t->speed_hz : spi->max_speed_hz;
cs->bits_per_word = (t && t->bits_per_word)
? t->bits_per_word : spi->bits_per_word;
cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8;
return 0;
}
static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
{
struct mpc512x_psc_spi_cs *cs = spi->controller_state;
struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
u32 sicr;
u32 ccr;
int speed;
u16 bclkdiv;
sicr = in_be32(psc_addr(mps, sicr));
/* Set clock phase and polarity */
if (spi->mode & SPI_CPHA)
sicr |= 0x00001000;
else
sicr &= ~0x00001000;
if (spi->mode & SPI_CPOL)
sicr |= 0x00002000;
else
sicr &= ~0x00002000;
if (spi->mode & SPI_LSB_FIRST)
sicr |= 0x10000000;
else
sicr &= ~0x10000000;
out_be32(psc_addr(mps, sicr), sicr);
ccr = in_be32(psc_addr(mps, ccr));
ccr &= 0xFF000000;
speed = cs->speed_hz;
if (!speed)
speed = 1000000; /* default 1MHz */
bclkdiv = (mps->mclk_rate / speed) - 1;
ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
out_be32(psc_addr(mps, ccr), ccr);
mps->bits_per_word = cs->bits_per_word;
if (spi_get_csgpiod(spi, 0)) {
/* gpiolib will deal with the inversion */
gpiod_set_value(spi_get_csgpiod(spi, 0), 1);
}
}
static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
{
if (spi_get_csgpiod(spi, 0)) {
/* gpiolib will deal with the inversion */
gpiod_set_value(spi_get_csgpiod(spi, 0), 0);
}
}
/* extract and scale size field in txsz or rxsz */
#define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2);
#define EOFBYTE 1
static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi,
struct spi_transfer *t)
{
struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
size_t tx_len = t->len;
size_t rx_len = t->len;
u8 *tx_buf = (u8 *)t->tx_buf;
u8 *rx_buf = (u8 *)t->rx_buf;
if (!tx_buf && !rx_buf && t->len)
return -EINVAL;
while (rx_len || tx_len) {
size_t txcount;
u8 data;
size_t fifosz;
size_t rxcount;
int rxtries;
/*
* send the TX bytes in as large a chunk as possible
* but neither exceed the TX nor the RX FIFOs
*/
fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz));
txcount = min(fifosz, tx_len);
fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->rxsz));
fifosz -= in_be32(&fifo->rxcnt) + 1;
txcount = min(fifosz, txcount);
if (txcount) {
/* fill the TX FIFO */
while (txcount-- > 0) {
data = tx_buf ? *tx_buf++ : 0;
if (tx_len == EOFBYTE && t->cs_change)
setbits32(&fifo->txcmd,
MPC512x_PSC_FIFO_EOF);
out_8(&fifo->txdata_8, data);
tx_len--;
}
/* have the ISR trigger when the TX FIFO is empty */
reinit_completion(&mps->txisrdone);
out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY);
wait_for_completion(&mps->txisrdone);
}
/*
* consume as much RX data as the FIFO holds, while we
* iterate over the transfer's TX data length
*
* only insist in draining all the remaining RX bytes
* when the TX bytes were exhausted (that's at the very
* end of this transfer, not when still iterating over
* the transfer's chunks)
*/
rxtries = 50;
do {
/*
* grab whatever was in the FIFO when we started
* looking, don't bother fetching what was added to
* the FIFO while we read from it -- we'll return
* here eventually and prefer sending out remaining
* TX data
*/
fifosz = in_be32(&fifo->rxcnt);
rxcount = min(fifosz, rx_len);
while (rxcount-- > 0) {
data = in_8(&fifo->rxdata_8);
if (rx_buf)
*rx_buf++ = data;
rx_len--;
}
/*
* come back later if there still is TX data to send,
* bail out of the RX drain loop if all of the TX data
* was sent and all of the RX data was received (i.e.
* when the transmission has completed)
*/
if (tx_len)
break;
if (!rx_len)
break;
/*
* TX data transmission has completed while RX data
* is still pending -- that's a transient situation
* which depends on wire speed and specific
* hardware implementation details (buffering) yet
* should resolve very quickly
*
* just yield for a moment to not hog the CPU for
* too long when running SPI at low speed
*
* the timeout range is rather arbitrary and tries
* to balance throughput against system load; the
* chosen values result in a minimal timeout of 50
* times 10us and thus work at speeds as low as
* some 20kbps, while the maximum timeout at the
* transfer's end could be 5ms _if_ nothing else
* ticks in the system _and_ RX data still wasn't
* received, which only occurs in situations that
* are exceptional; removing the unpredictability
* of the timeout either decreases throughput
* (longer timeouts), or puts more load on the
* system (fixed short timeouts) or requires the
* use of a timeout API instead of a counter and an
* unknown inner delay
*/
usleep_range(10, 100);
} while (--rxtries > 0);
if (!tx_len && rx_len && !rxtries) {
/*
* not enough RX bytes even after several retries
* and the resulting rather long timeout?
*/
rxcount = in_be32(&fifo->rxcnt);
dev_warn(&spi->dev,
"short xfer, missing %zd RX bytes, FIFO level %zd\n",
rx_len, rxcount);
}
/*
* drain and drop RX data which "should not be there" in
* the first place, for undisturbed transmission this turns
* into a NOP (except for the FIFO level fetch)
*/
if (!tx_len && !rx_len) {
while (in_be32(&fifo->rxcnt))
in_8(&fifo->rxdata_8);
}
}
return 0;
}
static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
struct spi_message *m)
{
struct spi_device *spi;
unsigned cs_change;
int status;
struct spi_transfer *t;
spi = m->spi;
cs_change = 1;
status = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
status = mpc512x_psc_spi_transfer_setup(spi, t);
if (status < 0)
break;
if (cs_change)
mpc512x_psc_spi_activate_cs(spi);
cs_change = t->cs_change;
status = mpc512x_psc_spi_transfer_rxtx(spi, t);
if (status)
break;
m->actual_length += t->len;
spi_transfer_delay_exec(t);
if (cs_change)
mpc512x_psc_spi_deactivate_cs(spi);
}
m->status = status;
if (m->complete)
m->complete(m->context);
if (status || !cs_change)
mpc512x_psc_spi_deactivate_cs(spi);
mpc512x_psc_spi_transfer_setup(spi, NULL);
spi_finalize_current_message(master);
return status;
}
static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master)
{
struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
dev_dbg(&master->dev, "%s()\n", __func__);
/* Zero MR2 */
in_8(psc_addr(mps, mr2));
out_8(psc_addr(mps, mr2), 0x0);
/* enable transmitter/receiver */
out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
return 0;
}
static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_master *master)
{
struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
dev_dbg(&master->dev, "%s()\n", __func__);
/* disable transmitter/receiver and fifo interrupt */
out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
out_be32(&fifo->tximr, 0);
return 0;
}
static int mpc512x_psc_spi_setup(struct spi_device *spi)
{
struct mpc512x_psc_spi_cs *cs = spi->controller_state;
if (spi->bits_per_word % 8)
return -EINVAL;
if (!cs) {
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs)
return -ENOMEM;
spi->controller_state = cs;
}
cs->bits_per_word = spi->bits_per_word;
cs->speed_hz = spi->max_speed_hz;
return 0;
}
static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
{
kfree(spi->controller_state);
}
static int mpc512x_psc_spi_port_config(struct spi_master *master,
struct mpc512x_psc_spi *mps)
{
struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
u32 sicr;
u32 ccr;
int speed;
u16 bclkdiv;
/* Reset the PSC into a known state */
out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX);
out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX);
out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
/* Disable psc interrupts all useful interrupts are in fifo */
out_be16(psc_addr(mps, isr_imr.imr), 0);
/* Disable fifo interrupts, will be enabled later */
out_be32(&fifo->tximr, 0);
out_be32(&fifo->rximr, 0);
/* Setup fifo slice address and size */
/*out_be32(&fifo->txsz, 0x0fe00004);*/
/*out_be32(&fifo->rxsz, 0x0ff00004);*/
sicr = 0x01000000 | /* SIM = 0001 -- 8 bit */
0x00800000 | /* GenClk = 1 -- internal clk */
0x00008000 | /* SPI = 1 */
0x00004000 | /* MSTR = 1 -- SPI master */
0x00000800; /* UseEOF = 1 -- SS low until EOF */
out_be32(psc_addr(mps, sicr), sicr);
ccr = in_be32(psc_addr(mps, ccr));
ccr &= 0xFF000000;
speed = 1000000; /* default 1MHz */
bclkdiv = (mps->mclk_rate / speed) - 1;
ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
out_be32(psc_addr(mps, ccr), ccr);
/* Set 2ms DTL delay */
out_8(psc_addr(mps, ctur), 0x00);
out_8(psc_addr(mps, ctlr), 0x82);
/* we don't use the alarms */
out_be32(&fifo->rxalarm, 0xfff);
out_be32(&fifo->txalarm, 0);
/* Enable FIFO slices for Rx/Tx */
out_be32(&fifo->rxcmd,
MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
out_be32(&fifo->txcmd,
MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
mps->bits_per_word = 8;
return 0;
}
static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
{
struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id;
struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
/* clear interrupt and wake up the rx/tx routine */
if (in_be32(&fifo->txisr) &
in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) {
out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
out_be32(&fifo->tximr, 0);
complete(&mps->txisrdone);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static int mpc512x_psc_spi_of_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mpc512x_psc_spi *mps;
struct spi_master *master;
int ret;
void *tempp;
struct clk *clk;
master = devm_spi_alloc_master(dev, sizeof(*mps));
if (master == NULL)
return -ENOMEM;
dev_set_drvdata(dev, master);
mps = spi_master_get_devdata(master);
mps->type = (int)device_get_match_data(dev);
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
master->setup = mpc512x_psc_spi_setup;
master->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw;
master->transfer_one_message = mpc512x_psc_spi_msg_xfer;
master->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw;
master->use_gpio_descriptors = true;
master->cleanup = mpc512x_psc_spi_cleanup;
device_set_node(&master->dev, dev_fwnode(dev));
tempp = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(tempp))
return dev_err_probe(dev, PTR_ERR(tempp), "could not ioremap I/O port range\n");
mps->psc = tempp;
mps->fifo =
(struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc));
mps->irq = platform_get_irq(pdev, 0);
if (mps->irq < 0)
return mps->irq;
ret = devm_request_irq(dev, mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED,
"mpc512x-psc-spi", mps);
if (ret)
return ret;
init_completion(&mps->txisrdone);
clk = devm_clk_get_enabled(dev, "mclk");
if (IS_ERR(clk))
return PTR_ERR(clk);
mps->mclk_rate = clk_get_rate(clk);
clk = devm_clk_get_enabled(dev, "ipg");
if (IS_ERR(clk))
return PTR_ERR(clk);
ret = mpc512x_psc_spi_port_config(master, mps);
if (ret < 0)
return ret;
return devm_spi_register_master(dev, master);
}
static const struct of_device_id mpc512x_psc_spi_of_match[] = {
{ .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 },
{ .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 },
{},
};
MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
static struct platform_driver mpc512x_psc_spi_of_driver = {
.probe = mpc512x_psc_spi_of_probe,
.driver = {
.name = "mpc512x-psc-spi",
.of_match_table = mpc512x_psc_spi_of_match,
},
};
module_platform_driver(mpc512x_psc_spi_of_driver);
MODULE_AUTHOR("John Rigby");
MODULE_DESCRIPTION("MPC512x PSC SPI Driver");
MODULE_LICENSE("GPL");