mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
29f84af6ab
The generic property, used in most of the drivers and defined in generic dma-common DT bindings, is 'dma-channels'. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220503065201.51818-3-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
82 lines
2.0 KiB
Plaintext
82 lines
2.0 KiB
Plaintext
TI DA8xx MUSB
|
|
~~~~~~~~~~~~~
|
|
For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
|
|
|
|
Required properties:
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
- compatible : Should be set to "ti,da830-musb".
|
|
|
|
- reg: Offset and length of the USB controller register set.
|
|
|
|
- interrupts: The USB interrupt number.
|
|
|
|
- interrupt-names: Should be set to "mc".
|
|
|
|
- dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
|
|
|
|
- phys: Phandle for the PHY device
|
|
|
|
- phy-names: Should be "usb-phy"
|
|
|
|
- dmas: specifies the dma channels
|
|
|
|
- dma-names: specifies the names of the channels. Use "rxN" for receive
|
|
and "txN" for transmit endpoints. N specifies the endpoint number.
|
|
|
|
Optional properties:
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
- vbus-supply: Phandle to a regulator providing the USB bus power.
|
|
|
|
DMA
|
|
~~~
|
|
- compatible: ti,da830-cppi41
|
|
- reg: offset and length of the following register spaces: CPPI DMA Controller,
|
|
CPPI DMA Scheduler, Queue Manager
|
|
- reg-names: "controller", "scheduler", "queuemgr"
|
|
- #dma-cells: should be set to 2. The first number represents the
|
|
channel number (0 … 3 for endpoints 1 … 4).
|
|
The second number is 0 for RX and 1 for TX transfers.
|
|
- dma-channels: should be set to 4 representing the 4 endpoints.
|
|
- #dma-channels: deprecated
|
|
|
|
Example:
|
|
usb_phy: usb-phy {
|
|
compatible = "ti,da830-usb-phy";
|
|
#phy-cells = <0>;
|
|
};
|
|
usb0: usb@200000 {
|
|
compatible = "ti,da830-musb";
|
|
reg = <0x00200000 0x1000>;
|
|
ranges;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupts = <58>;
|
|
interrupt-names = "mc";
|
|
|
|
dr_mode = "host";
|
|
vbus-supply = <&usb_vbus>;
|
|
phys = <&usb_phy 0>;
|
|
phy-names = "usb-phy";
|
|
|
|
dmas = <&cppi41dma 0 0 &cppi41dma 1 0
|
|
&cppi41dma 2 0 &cppi41dma 3 0
|
|
&cppi41dma 0 1 &cppi41dma 1 1
|
|
&cppi41dma 2 1 &cppi41dma 3 1>;
|
|
dma-names =
|
|
"rx1", "rx2", "rx3", "rx4",
|
|
"tx1", "tx2", "tx3", "tx4";
|
|
|
|
|
|
cppi41dma: dma-controller@201000 {
|
|
compatible = "ti,da830-cppi41";
|
|
reg = <0x201000 0x1000
|
|
0x202000 0x1000
|
|
0x204000 0x4000>;
|
|
reg-names = "controller", "scheduler", "queuemgr";
|
|
interrupts = <58>;
|
|
#dma-cells = <2>;
|
|
dma-channels = <4>;
|
|
};
|
|
|
|
};
|