mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 12:04:46 +08:00
af1ffd628a
Add a V4L2 driver for Renesas R-Car Image Signal Processor. The driver supports the R-Car V3U SoC where the ISP IP sits between the R-Car CSI-2 receiver and VIN and filters the CSI-2 data based on VC/DT and directs the video stream to different VIN IPs. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
668 lines
20 KiB
Plaintext
668 lines
20 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Platform drivers
|
|
# Most drivers here are currently for webcam support
|
|
|
|
menuconfig V4L_PLATFORM_DRIVERS
|
|
bool "V4L platform devices"
|
|
help
|
|
Say Y here to enable support for platform-specific V4L drivers.
|
|
|
|
if V4L_PLATFORM_DRIVERS
|
|
|
|
source "drivers/media/platform/marvell-ccic/Kconfig"
|
|
|
|
config VIDEO_VIA_CAMERA
|
|
tristate "VIAFB camera controller support"
|
|
depends on FB_VIA && VIDEO_V4L2
|
|
select VIDEOBUF2_DMA_SG
|
|
select VIDEO_OV7670
|
|
help
|
|
Driver support for the integrated camera controller in VIA
|
|
Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
|
|
with ov7670 sensors.
|
|
|
|
#
|
|
# Platform multimedia device configuration
|
|
#
|
|
source "drivers/media/platform/cadence/Kconfig"
|
|
|
|
source "drivers/media/platform/davinci/Kconfig"
|
|
|
|
source "drivers/media/platform/omap/Kconfig"
|
|
|
|
config VIDEO_ASPEED
|
|
tristate "Aspeed AST2400 and AST2500 Video Engine driver"
|
|
depends on VIDEO_V4L2
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
help
|
|
Support for the Aspeed Video Engine (VE) embedded in the Aspeed
|
|
AST2400 and AST2500 SOCs. The VE can capture and compress video data
|
|
from digital or analog sources.
|
|
|
|
config VIDEO_SH_VOU
|
|
tristate "SuperH VOU video output driver"
|
|
depends on VIDEO_DEV && I2C
|
|
depends on ARCH_SHMOBILE || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
help
|
|
Support for the Video Output Unit (VOU) on SuperH SoCs.
|
|
|
|
config VIDEO_VIU
|
|
tristate "Freescale VIU Video Driver"
|
|
depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C
|
|
select VIDEOBUF_DMA_CONTIG
|
|
default y
|
|
help
|
|
Support for Freescale VIU video driver. This device captures
|
|
video data, or overlays video on DIU frame buffer.
|
|
|
|
Say Y here if you want to enable VIU device on MPC5121e Rev2+.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_MUX
|
|
tristate "Video Multiplexer"
|
|
select MULTIPLEXER
|
|
depends on VIDEO_V4L2 && OF
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
select REGMAP
|
|
select V4L2_FWNODE
|
|
help
|
|
This driver provides support for N:1 video bus multiplexers.
|
|
|
|
config VIDEO_OMAP3
|
|
tristate "OMAP 3 Camera support"
|
|
depends on VIDEO_V4L2 && I2C
|
|
depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST
|
|
depends on COMMON_CLK && OF
|
|
select ARM_DMA_USE_IOMMU if OMAP_IOMMU
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select MFD_SYSCON
|
|
select V4L2_FWNODE
|
|
help
|
|
Driver for an OMAP 3 camera controller.
|
|
|
|
config VIDEO_OMAP3_DEBUG
|
|
bool "OMAP 3 Camera debug messages"
|
|
depends on VIDEO_OMAP3
|
|
help
|
|
Enable debug messages on OMAP 3 camera controller driver.
|
|
|
|
config VIDEO_PXA27x
|
|
tristate "PXA27x Quick Capture Interface driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on PXA27x || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_SG
|
|
select SG_SPLIT
|
|
select V4L2_FWNODE
|
|
help
|
|
This is a v4l2 driver for the PXA27x Quick Capture Interface
|
|
|
|
config VIDEO_QCOM_CAMSS
|
|
tristate "Qualcomm V4L2 Camera Subsystem driver"
|
|
depends on VIDEO_V4L2
|
|
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
select VIDEOBUF2_DMA_SG
|
|
select V4L2_FWNODE
|
|
|
|
config VIDEO_S3C_CAMIF
|
|
tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
|
|
depends on VIDEO_V4L2 && I2C && PM
|
|
depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
help
|
|
This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
|
|
host interface (CAMIF).
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called s3c-camif.
|
|
|
|
config VIDEO_STM32_DCMI
|
|
tristate "STM32 Digital Camera Memory Interface (DCMI) support"
|
|
depends on VIDEO_V4L2 && OF
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select MEDIA_CONTROLLER
|
|
select V4L2_FWNODE
|
|
help
|
|
This module makes the STM32 Digital Camera Memory Interface (DCMI)
|
|
available as a v4l2 device.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called stm32-dcmi.
|
|
|
|
config VIDEO_RENESAS_CEU
|
|
tristate "Renesas Capture Engine Unit (CEU) driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_FWNODE
|
|
help
|
|
This is a v4l2 driver for the Renesas CEU Interface
|
|
|
|
config VIDEO_ROCKCHIP_ISP1
|
|
tristate "Rockchip Image Signal Processing v1 Unit driver"
|
|
depends on VIDEO_V4L2 && OF
|
|
depends on ARCH_ROCKCHIP || COMPILE_TEST
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select VIDEOBUF2_VMALLOC
|
|
select V4L2_FWNODE
|
|
select GENERIC_PHY_MIPI_DPHY
|
|
default n
|
|
help
|
|
Enable this to support the Image Signal Processing (ISP) module
|
|
present in RK3399 SoCs.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called rockchip-isp1.
|
|
|
|
source "drivers/media/platform/exynos4-is/Kconfig"
|
|
source "drivers/media/platform/am437x/Kconfig"
|
|
source "drivers/media/platform/xilinx/Kconfig"
|
|
source "drivers/media/platform/rcar-vin/Kconfig"
|
|
source "drivers/media/platform/atmel/Kconfig"
|
|
source "drivers/media/platform/sunxi/Kconfig"
|
|
|
|
config VIDEO_TI_CAL
|
|
tristate "TI CAL (Camera Adaptation Layer) driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_FWNODE
|
|
help
|
|
Support for the TI CAL (Camera Adaptation Layer) block
|
|
found on DRA72X SoC.
|
|
In TI Technical Reference Manual this module is referred as
|
|
Camera Interface Subsystem (CAMSS).
|
|
|
|
if VIDEO_TI_CAL
|
|
|
|
config VIDEO_TI_CAL_MC
|
|
bool "Media Controller centric mode by default"
|
|
default n
|
|
help
|
|
Enables Media Controller centric mode by default.
|
|
|
|
If set, CAL driver will start in Media Controller mode by
|
|
default. Note that this behavior can be overridden via
|
|
module parameter 'mc_api'.
|
|
|
|
endif # VIDEO_TI_CAL
|
|
|
|
config VIDEO_RCAR_ISP
|
|
tristate "R-Car Image Signal Processor (ISP)"
|
|
depends on VIDEO_V4L2 && OF
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
select RESET_CONTROLLER
|
|
select V4L2_FWNODE
|
|
help
|
|
Support for Renesas R-Car Image Signal Processor (ISP).
|
|
Enable this to support the Renesas R-Car Image Signal
|
|
Processor (ISP).
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called rcar-isp.
|
|
|
|
endif # V4L_PLATFORM_DRIVERS
|
|
|
|
menuconfig V4L_MEM2MEM_DRIVERS
|
|
bool "Memory-to-memory multimedia devices"
|
|
depends on VIDEO_V4L2
|
|
help
|
|
Say Y here to enable selecting drivers for V4L devices that
|
|
use system memory for both source and destination buffers, as opposed
|
|
to capture and output drivers, which use memory buffers for just
|
|
one of those.
|
|
|
|
if V4L_MEM2MEM_DRIVERS
|
|
|
|
config VIDEO_ALLEGRO_DVT
|
|
tristate "Allegro DVT Video IP Core"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_ZYNQMP || COMPILE_TEST
|
|
select V4L2_MEM2MEM_DEV
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select REGMAP_MMIO
|
|
help
|
|
Support for the encoder video IP core by Allegro DVT. This core is
|
|
found for example on the Xilinx ZynqMP SoC in the EV family and is
|
|
called VCU in the reference manual.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called allegro.
|
|
|
|
config VIDEO_CODA
|
|
tristate "Chips&Media Coda multi-standard codec IP"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && OF && (ARCH_MXC || COMPILE_TEST)
|
|
select SRAM
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select VIDEOBUF2_VMALLOC
|
|
select V4L2_JPEG_HELPER
|
|
select V4L2_MEM2MEM_DEV
|
|
select GENERIC_ALLOCATOR
|
|
help
|
|
Coda is a range of video codec IPs that supports
|
|
H.264, MPEG-4, and other video formats.
|
|
|
|
config VIDEO_IMX_VDOA
|
|
def_tristate VIDEO_CODA if SOC_IMX6Q || COMPILE_TEST
|
|
|
|
config VIDEO_IMX_PXP
|
|
tristate "i.MX Pixel Pipeline (PXP)"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST)
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
The i.MX Pixel Pipeline is a memory-to-memory engine for scaling,
|
|
color space conversion, and rotation.
|
|
|
|
source "drivers/media/platform/imx-jpeg/Kconfig"
|
|
|
|
config VIDEO_MEDIATEK_JPEG
|
|
tristate "Mediatek JPEG Codec driver"
|
|
depends on MTK_IOMMU_V1 || MTK_IOMMU || COMPILE_TEST
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_MEDIATEK || COMPILE_TEST
|
|
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
Mediatek jpeg codec driver provides HW capability to decode
|
|
JPEG format
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mtk-jpeg
|
|
|
|
config VIDEO_MEDIATEK_VPU
|
|
tristate "Mediatek Video Processor Unit"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_MEDIATEK || COMPILE_TEST
|
|
help
|
|
This driver provides downloading VPU firmware and
|
|
communicating with VPU. This driver for hw video
|
|
codec embedded in Mediatek's MT8173 SOCs. It is able
|
|
to handle video decoding/encoding in a range of formats.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mtk-vpu.
|
|
|
|
config VIDEO_MEDIATEK_MDP
|
|
tristate "Mediatek MDP driver"
|
|
depends on MTK_IOMMU || COMPILE_TEST
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_MEDIATEK || COMPILE_TEST
|
|
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
select VIDEO_MEDIATEK_VPU
|
|
help
|
|
It is a v4l2 driver and present in Mediatek MT8173 SoCs.
|
|
The driver supports for scaling and color space conversion.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mtk-mdp.
|
|
|
|
config VIDEO_MEDIATEK_VCODEC
|
|
tristate "Mediatek Video Codec driver"
|
|
depends on MTK_IOMMU || COMPILE_TEST
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_MEDIATEK || COMPILE_TEST
|
|
depends on VIDEO_MEDIATEK_VPU || MTK_SCP
|
|
# The two following lines ensure we have the same state ("m" or "y") as
|
|
# our dependencies, to avoid missing symbols during link.
|
|
depends on VIDEO_MEDIATEK_VPU || !VIDEO_MEDIATEK_VPU
|
|
depends on MTK_SCP || !MTK_SCP
|
|
depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n)
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU
|
|
select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP
|
|
select V4L2_H264
|
|
select MEDIA_CONTROLLER
|
|
select MEDIA_CONTROLLER_REQUEST_API
|
|
help
|
|
Mediatek video codec driver provides HW capability to
|
|
encode and decode in a range of video formats on MT8173
|
|
and MT8183.
|
|
|
|
Note that support for MT8173 requires VIDEO_MEDIATEK_VPU to
|
|
also be selected. Support for MT8183 depends on MTK_SCP.
|
|
|
|
To compile this driver as modules, choose M here: the
|
|
modules will be called mtk-vcodec-dec and mtk-vcodec-enc.
|
|
|
|
config VIDEO_MEDIATEK_VCODEC_VPU
|
|
bool
|
|
|
|
config VIDEO_MEDIATEK_VCODEC_SCP
|
|
bool
|
|
|
|
config VIDEO_MEM2MEM_DEINTERLACE
|
|
tristate "Deinterlace support"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on HAS_DMA
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
Generic deinterlacing V4L2 driver.
|
|
|
|
config VIDEO_MESON_GE2D
|
|
tristate "Amlogic 2D Graphic Acceleration Unit"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_MESON || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a v4l2 driver for Amlogic GE2D 2D graphics accelerator.
|
|
GE2D is a standalone 2D graphic acceleration unit, with color converter,
|
|
image scaling, BitBLT & alpha blending operations.
|
|
|
|
To compile this driver as a module choose m here.
|
|
|
|
config VIDEO_SAMSUNG_S5P_G2D
|
|
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
|
|
2d graphics accelerator.
|
|
|
|
config VIDEO_SAMSUNG_S5P_JPEG
|
|
tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a v4l2 driver for Samsung S5P, EXYNOS3250
|
|
and EXYNOS4 JPEG codec
|
|
|
|
config VIDEO_SAMSUNG_S5P_MFC
|
|
tristate "Samsung S5P MFC Video Codec"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
help
|
|
MFC 5.1 and 6.x driver for V4L2
|
|
|
|
config VIDEO_MX2_EMMAPRP
|
|
tristate "MX2 eMMa-PrP support"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on SOC_IMX27 || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
MX2X chips have a PrP that can be used to process buffers from
|
|
memory to memory. Operations include resizing and format
|
|
conversion.
|
|
|
|
config VIDEO_SAMSUNG_EXYNOS_GSC
|
|
tristate "Samsung Exynos G-Scaler driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_EXYNOS || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.
|
|
|
|
config VIDEO_STI_BDISP
|
|
tristate "STMicroelectronics BDISP 2D blitter driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_STI || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC.
|
|
|
|
config VIDEO_STI_HVA
|
|
tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_STI || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format
|
|
video encoder of STMicroelectronics SoC, allowing hardware encoding of
|
|
raw uncompressed formats in various compressed video bitstreams format.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called st-hva.
|
|
|
|
config VIDEO_STI_HVA_DEBUGFS
|
|
bool "Export STMicroelectronics HVA internals in debugfs"
|
|
depends on VIDEO_STI_HVA
|
|
depends on DEBUG_FS
|
|
help
|
|
Select this to see information about the internal state and the last
|
|
operation of STMicroelectronics HVA multi-format video encoder in
|
|
debugfs.
|
|
|
|
Choose N unless you know you need this.
|
|
|
|
config VIDEO_STI_DELTA
|
|
tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_STI || COMPILE_TEST
|
|
help
|
|
This V4L2 driver enables DELTA multi-format video decoder
|
|
of STMicroelectronics STiH4xx SoC series allowing hardware
|
|
decoding of various compressed video bitstream format in
|
|
raw uncompressed format.
|
|
|
|
Use this option to see the decoders available for such
|
|
hardware.
|
|
|
|
Please notice that the driver will only be built if
|
|
at least one of the DELTA decoder below is selected.
|
|
|
|
if VIDEO_STI_DELTA
|
|
|
|
config VIDEO_STI_DELTA_MJPEG
|
|
bool "STMicroelectronics DELTA MJPEG support"
|
|
default y
|
|
help
|
|
Enables DELTA MJPEG hardware support.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called st-delta.
|
|
|
|
config VIDEO_STI_DELTA_DRIVER
|
|
tristate
|
|
depends on VIDEO_STI_DELTA
|
|
depends on VIDEO_STI_DELTA_MJPEG
|
|
default VIDEO_STI_DELTA_MJPEG
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
select RPMSG
|
|
|
|
endif # VIDEO_STI_DELTA
|
|
|
|
config VIDEO_RENESAS_FDP1
|
|
tristate "Renesas Fine Display Processor"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a V4L2 driver for the Renesas Fine Display Processor
|
|
providing colour space conversion, and de-interlacing features.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called rcar_fdp1.
|
|
|
|
config VIDEO_RENESAS_JPU
|
|
tristate "Renesas JPEG Processing Unit"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a V4L2 driver for the Renesas JPEG Processing Unit.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called rcar_jpu.
|
|
|
|
config VIDEO_RENESAS_FCP
|
|
tristate "Renesas Frame Compression Processor"
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
depends on OF
|
|
help
|
|
This is a driver for the Renesas Frame Compression Processor (FCP).
|
|
The FCP is a companion module of video processing modules in the
|
|
Renesas R-Car Gen3 and RZ/G2 SoCs. It handles memory access for
|
|
the codec, VSP and FDP modules.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called rcar-fcp.
|
|
|
|
config VIDEO_RENESAS_VSP1
|
|
tristate "Renesas VSP1 Video Processing Engine"
|
|
depends on VIDEO_V4L2
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
|
|
select MEDIA_CONTROLLER
|
|
select VIDEO_V4L2_SUBDEV_API
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select VIDEOBUF2_VMALLOC
|
|
help
|
|
This is a V4L2 driver for the Renesas VSP1 video processing engine.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called vsp1.
|
|
|
|
config VIDEO_ROCKCHIP_RGA
|
|
tristate "Rockchip Raster 2d Graphic Acceleration Unit"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_ROCKCHIP || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_SG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator.
|
|
Rockchip RGA is a separate 2D raster graphic acceleration unit.
|
|
It accelerates 2D graphics operations, such as point/line drawing,
|
|
image scaling, rotation, BitBLT, alpha blending and image blur/sharpness.
|
|
|
|
To compile this driver as a module choose m here.
|
|
|
|
config VIDEO_TI_VPE
|
|
tristate "TI VPE (Video Processing Engine) driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on SOC_DRA7XX || COMPILE_TEST
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
select VIDEO_TI_VPDMA
|
|
select VIDEO_TI_SC
|
|
select VIDEO_TI_CSC
|
|
help
|
|
Support for the TI VPE(Video Processing Engine) block
|
|
found on DRA7XX SoC.
|
|
|
|
config VIDEO_TI_VPE_DEBUG
|
|
bool "VPE debug messages"
|
|
depends on VIDEO_TI_VPE
|
|
help
|
|
Enable debug messages on VPE driver.
|
|
|
|
config VIDEO_QCOM_VENUS
|
|
tristate "Qualcomm Venus V4L2 encoder/decoder driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && QCOM_SMEM
|
|
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
|
|
select QCOM_MDT_LOADER if ARCH_QCOM
|
|
select QCOM_SCM if ARCH_QCOM
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a V4L2 driver for Qualcomm Venus video accelerator
|
|
hardware. It accelerates encoding and decoding operations
|
|
on various Qualcomm SoCs.
|
|
To compile this driver as a module choose m here.
|
|
|
|
config VIDEO_SUN8I_DEINTERLACE
|
|
tristate "Allwinner Deinterlace driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_SUNXI || COMPILE_TEST
|
|
depends on COMMON_CLK && OF
|
|
depends on PM
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
Support for the Allwinner deinterlace unit with scaling
|
|
capability found on some SoCs, like H3.
|
|
To compile this driver as a module choose m here.
|
|
|
|
config VIDEO_SUN8I_ROTATE
|
|
tristate "Allwinner DE2 rotation driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
depends on ARCH_SUNXI || COMPILE_TEST
|
|
depends on COMMON_CLK && OF
|
|
depends on PM
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
Support for the Allwinner DE2 rotation unit.
|
|
To compile this driver as a module choose m here.
|
|
|
|
endif # V4L_MEM2MEM_DRIVERS
|
|
|
|
# TI VIDEO PORT Helper Modules
|
|
# These will be selected by VPE and VIP
|
|
config VIDEO_TI_VPDMA
|
|
tristate
|
|
|
|
config VIDEO_TI_SC
|
|
tristate
|
|
|
|
config VIDEO_TI_CSC
|
|
tristate
|
|
|
|
menuconfig DVB_PLATFORM_DRIVERS
|
|
bool "DVB platform devices"
|
|
depends on MEDIA_DIGITAL_TV_SUPPORT
|
|
help
|
|
Say Y here to enable support for platform-specific Digital TV drivers.
|
|
|
|
if DVB_PLATFORM_DRIVERS
|
|
source "drivers/media/platform/sti/c8sectpfe/Kconfig"
|
|
endif #DVB_PLATFORM_DRIVERS
|
|
|
|
menuconfig SDR_PLATFORM_DRIVERS
|
|
bool "SDR platform devices"
|
|
depends on MEDIA_SDR_SUPPORT
|
|
help
|
|
Say Y here to enable support for platform-specific SDR Drivers.
|
|
|
|
if SDR_PLATFORM_DRIVERS
|
|
|
|
config VIDEO_RCAR_DRIF
|
|
tristate "Renesas Digital Radio Interface (DRIF)"
|
|
depends on VIDEO_V4L2
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
|
select VIDEOBUF2_VMALLOC
|
|
select V4L2_ASYNC
|
|
help
|
|
Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital
|
|
Radio Interface that interfaces with an RF front end chip. It is a
|
|
receiver of digital data which uses DMA to transfer received data to
|
|
a configured location for an application to use.
|
|
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called rcar_drif.
|
|
|
|
endif # SDR_PLATFORM_DRIVERS
|