mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 10:05:00 +08:00
90b8c2c8f9
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-18-jic23@kernel.org
288 lines
6.4 KiB
C
288 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Freescale Vybrid vf610 DAC driver
|
|
*
|
|
* Copyright 2016 Toradex AG
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define VF610_DACx_STATCTRL 0x20
|
|
|
|
#define VF610_DAC_DACEN BIT(15)
|
|
#define VF610_DAC_DACRFS BIT(14)
|
|
#define VF610_DAC_LPEN BIT(11)
|
|
|
|
#define VF610_DAC_DAT0(x) ((x) & 0xFFF)
|
|
|
|
enum vf610_conversion_mode_sel {
|
|
VF610_DAC_CONV_HIGH_POWER,
|
|
VF610_DAC_CONV_LOW_POWER,
|
|
};
|
|
|
|
struct vf610_dac {
|
|
struct clk *clk;
|
|
struct device *dev;
|
|
enum vf610_conversion_mode_sel conv_mode;
|
|
void __iomem *regs;
|
|
struct mutex lock;
|
|
};
|
|
|
|
static void vf610_dac_init(struct vf610_dac *info)
|
|
{
|
|
int val;
|
|
|
|
info->conv_mode = VF610_DAC_CONV_LOW_POWER;
|
|
val = VF610_DAC_DACEN | VF610_DAC_DACRFS |
|
|
VF610_DAC_LPEN;
|
|
writel(val, info->regs + VF610_DACx_STATCTRL);
|
|
}
|
|
|
|
static void vf610_dac_exit(struct vf610_dac *info)
|
|
{
|
|
int val;
|
|
|
|
val = readl(info->regs + VF610_DACx_STATCTRL);
|
|
val &= ~VF610_DAC_DACEN;
|
|
writel(val, info->regs + VF610_DACx_STATCTRL);
|
|
}
|
|
|
|
static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
unsigned int mode)
|
|
{
|
|
struct vf610_dac *info = iio_priv(indio_dev);
|
|
int val;
|
|
|
|
mutex_lock(&info->lock);
|
|
info->conv_mode = mode;
|
|
val = readl(info->regs + VF610_DACx_STATCTRL);
|
|
if (mode)
|
|
val |= VF610_DAC_LPEN;
|
|
else
|
|
val &= ~VF610_DAC_LPEN;
|
|
writel(val, info->regs + VF610_DACx_STATCTRL);
|
|
mutex_unlock(&info->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct vf610_dac *info = iio_priv(indio_dev);
|
|
|
|
return info->conv_mode;
|
|
}
|
|
|
|
static const char * const vf610_conv_modes[] = { "high-power", "low-power" };
|
|
|
|
static const struct iio_enum vf610_conversion_mode = {
|
|
.items = vf610_conv_modes,
|
|
.num_items = ARRAY_SIZE(vf610_conv_modes),
|
|
.get = vf610_get_conversion_mode,
|
|
.set = vf610_set_conversion_mode,
|
|
};
|
|
|
|
static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
|
|
IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR,
|
|
&vf610_conversion_mode),
|
|
{},
|
|
};
|
|
|
|
#define VF610_DAC_CHAN(_chan_type) { \
|
|
.type = (_chan_type), \
|
|
.output = 1, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.ext_info = vf610_ext_info, \
|
|
}
|
|
|
|
static const struct iio_chan_spec vf610_dac_iio_channels[] = {
|
|
VF610_DAC_CHAN(IIO_VOLTAGE),
|
|
};
|
|
|
|
static int vf610_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2,
|
|
long mask)
|
|
{
|
|
struct vf610_dac *info = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
*val = VF610_DAC_DAT0(readl(info->regs));
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/*
|
|
* DACRFS is always 1 for valid reference and typical
|
|
* reference voltage as per Vybrid datasheet is 3.3V
|
|
* from section 9.1.2.1 of Vybrid datasheet
|
|
*/
|
|
*val = 3300 /* mV */;
|
|
*val2 = 12;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int vf610_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2,
|
|
long mask)
|
|
{
|
|
struct vf610_dac *info = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&info->lock);
|
|
writel(VF610_DAC_DAT0(val), info->regs);
|
|
mutex_unlock(&info->lock);
|
|
return 0;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info vf610_dac_iio_info = {
|
|
.read_raw = &vf610_read_raw,
|
|
.write_raw = &vf610_write_raw,
|
|
};
|
|
|
|
static const struct of_device_id vf610_dac_match[] = {
|
|
{ .compatible = "fsl,vf610-dac", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, vf610_dac_match);
|
|
|
|
static int vf610_dac_probe(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct vf610_dac *info;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev,
|
|
sizeof(struct vf610_dac));
|
|
if (!indio_dev) {
|
|
dev_err(&pdev->dev, "Failed allocating iio device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info = iio_priv(indio_dev);
|
|
info->dev = &pdev->dev;
|
|
|
|
info->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(info->regs))
|
|
return PTR_ERR(info->regs);
|
|
|
|
info->clk = devm_clk_get(&pdev->dev, "dac");
|
|
if (IS_ERR(info->clk)) {
|
|
dev_err(&pdev->dev, "Failed getting clock, err = %ld\n",
|
|
PTR_ERR(info->clk));
|
|
return PTR_ERR(info->clk);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->info = &vf610_dac_iio_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = vf610_dac_iio_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(vf610_dac_iio_channels);
|
|
|
|
mutex_init(&info->lock);
|
|
|
|
ret = clk_prepare_enable(info->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Could not prepare or enable the clock\n");
|
|
return ret;
|
|
}
|
|
|
|
vf610_dac_init(info);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't register the device\n");
|
|
goto error_iio_device_register;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_iio_device_register:
|
|
vf610_dac_exit(info);
|
|
clk_disable_unprepare(info->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vf610_dac_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct vf610_dac *info = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
vf610_dac_exit(info);
|
|
clk_disable_unprepare(info->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vf610_dac_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct vf610_dac *info = iio_priv(indio_dev);
|
|
|
|
vf610_dac_exit(info);
|
|
clk_disable_unprepare(info->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vf610_dac_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct vf610_dac *info = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(info->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
vf610_dac_init(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend,
|
|
vf610_dac_resume);
|
|
|
|
static struct platform_driver vf610_dac_driver = {
|
|
.probe = vf610_dac_probe,
|
|
.remove = vf610_dac_remove,
|
|
.driver = {
|
|
.name = "vf610-dac",
|
|
.of_match_table = vf610_dac_match,
|
|
.pm = pm_sleep_ptr(&vf610_dac_pm_ops),
|
|
},
|
|
};
|
|
module_platform_driver(vf610_dac_driver);
|
|
|
|
MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
|
|
MODULE_DESCRIPTION("Freescale VF610 DAC driver");
|
|
MODULE_LICENSE("GPL v2");
|