mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
00f87ec74c
This will be used to identify ALSA controls and firmware. The Amp Name will be a channel identifier (L or R), and an index, which identifies which amp for that channel. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220509214703.4482-10-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
577 lines
16 KiB
C
577 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// CS35l41 ALSA HDA audio driver
|
|
//
|
|
// Copyright 2021 Cirrus Logic, Inc.
|
|
//
|
|
// Author: Lucas Tanure <tanureal@opensource.cirrus.com>
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/module.h>
|
|
#include <sound/hda_codec.h>
|
|
#include "hda_local.h"
|
|
#include "hda_auto_parser.h"
|
|
#include "hda_jack.h"
|
|
#include "hda_generic.h"
|
|
#include "hda_component.h"
|
|
#include "cs35l41_hda.h"
|
|
|
|
static const struct reg_sequence cs35l41_hda_config[] = {
|
|
{ CS35L41_PLL_CLK_CTRL, 0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
|
|
{ CS35L41_GLOBAL_CLK_CTRL, 0x00000003 }, // GLOBAL_FS = 48 kHz
|
|
{ CS35L41_SP_ENABLES, 0x00010000 }, // ASP_RX1_EN = 1
|
|
{ CS35L41_SP_RATE_CTRL, 0x00000021 }, // ASP_BCLK_FREQ = 3.072 MHz
|
|
{ CS35L41_SP_FORMAT, 0x20200200 }, // 32 bits RX/TX slots, I2S, clk consumer
|
|
{ CS35L41_DAC_PCM1_SRC, 0x00000008 }, // DACPCM1_SRC = ASPRX1
|
|
{ CS35L41_AMP_DIG_VOL_CTRL, 0x00000000 }, // AMP_VOL_PCM 0.0 dB
|
|
{ CS35L41_AMP_GAIN_CTRL, 0x00000084 }, // AMP_GAIN_PCM 4.5 dB
|
|
};
|
|
|
|
static const struct reg_sequence cs35l41_hda_mute[] = {
|
|
{ CS35L41_AMP_GAIN_CTRL, 0x00000000 }, // AMP_GAIN_PCM 0.5 dB
|
|
{ CS35L41_AMP_DIG_VOL_CTRL, 0x0000A678 }, // AMP_VOL_PCM Mute
|
|
};
|
|
|
|
/* Protection release cycle to get the speaker out of Safe-Mode */
|
|
static void cs35l41_error_release(struct device *dev, struct regmap *regmap, unsigned int mask)
|
|
{
|
|
regmap_write(regmap, CS35L41_PROTECT_REL_ERR_IGN, 0);
|
|
regmap_set_bits(regmap, CS35L41_PROTECT_REL_ERR_IGN, mask);
|
|
regmap_clear_bits(regmap, CS35L41_PROTECT_REL_ERR_IGN, mask);
|
|
}
|
|
|
|
/* Clear all errors to release safe mode. Global Enable must be cleared first. */
|
|
static void cs35l41_irq_release(struct cs35l41_hda *cs35l41)
|
|
{
|
|
cs35l41_error_release(cs35l41->dev, cs35l41->regmap, cs35l41->irq_errors);
|
|
cs35l41->irq_errors = 0;
|
|
}
|
|
|
|
static void cs35l41_hda_playback_hook(struct device *dev, int action)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
|
|
struct regmap *reg = cs35l41->regmap;
|
|
int ret = 0;
|
|
|
|
switch (action) {
|
|
case HDA_GEN_PCM_ACT_OPEN:
|
|
regmap_multi_reg_write(reg, cs35l41_hda_config, ARRAY_SIZE(cs35l41_hda_config));
|
|
ret = regmap_update_bits(reg, CS35L41_PWR_CTRL2,
|
|
CS35L41_AMP_EN_MASK, 1 << CS35L41_AMP_EN_SHIFT);
|
|
if (cs35l41->hw_cfg.bst_type == CS35L41_EXT_BOOST)
|
|
regmap_write(reg, CS35L41_GPIO1_CTRL1, 0x00008001);
|
|
break;
|
|
case HDA_GEN_PCM_ACT_PREPARE:
|
|
ret = cs35l41_global_enable(reg, cs35l41->hw_cfg.bst_type, 1);
|
|
break;
|
|
case HDA_GEN_PCM_ACT_CLEANUP:
|
|
regmap_multi_reg_write(reg, cs35l41_hda_mute, ARRAY_SIZE(cs35l41_hda_mute));
|
|
ret = cs35l41_global_enable(reg, cs35l41->hw_cfg.bst_type, 0);
|
|
break;
|
|
case HDA_GEN_PCM_ACT_CLOSE:
|
|
ret = regmap_update_bits(reg, CS35L41_PWR_CTRL2,
|
|
CS35L41_AMP_EN_MASK, 0 << CS35L41_AMP_EN_SHIFT);
|
|
if (cs35l41->hw_cfg.bst_type == CS35L41_EXT_BOOST)
|
|
regmap_write(reg, CS35L41_GPIO1_CTRL1, 0x00000001);
|
|
cs35l41_irq_release(cs35l41);
|
|
break;
|
|
default:
|
|
dev_warn(cs35l41->dev, "Playback action not supported: %d\n", action);
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
dev_err(cs35l41->dev, "Regmap access fail: %d\n", ret);
|
|
}
|
|
|
|
static int cs35l41_hda_channel_map(struct device *dev, unsigned int tx_num, unsigned int *tx_slot,
|
|
unsigned int rx_num, unsigned int *rx_slot)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
|
|
static const char * const channel_name[] = { "L", "R" };
|
|
|
|
if (!cs35l41->amp_name) {
|
|
if (*rx_slot >= ARRAY_SIZE(channel_name))
|
|
return -EINVAL;
|
|
|
|
cs35l41->amp_name = devm_kasprintf(cs35l41->dev, GFP_KERNEL, "%s%d",
|
|
channel_name[*rx_slot], cs35l41->channel_index);
|
|
if (!cs35l41->amp_name)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return cs35l41_set_channels(cs35l41->dev, cs35l41->regmap, tx_num, tx_slot, rx_num,
|
|
rx_slot);
|
|
}
|
|
|
|
static int cs35l41_hda_bind(struct device *dev, struct device *master, void *master_data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
|
|
struct hda_component *comps = master_data;
|
|
|
|
if (!comps || cs35l41->index < 0 || cs35l41->index >= HDA_MAX_COMPONENTS)
|
|
return -EINVAL;
|
|
|
|
comps = &comps[cs35l41->index];
|
|
if (comps->dev)
|
|
return -EBUSY;
|
|
|
|
comps->dev = dev;
|
|
strscpy(comps->name, dev_name(dev), sizeof(comps->name));
|
|
comps->playback_hook = cs35l41_hda_playback_hook;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cs35l41_hda_unbind(struct device *dev, struct device *master, void *master_data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
|
|
struct hda_component *comps = master_data;
|
|
|
|
if (comps[cs35l41->index].dev == dev)
|
|
memset(&comps[cs35l41->index], 0, sizeof(*comps));
|
|
}
|
|
|
|
static const struct component_ops cs35l41_hda_comp_ops = {
|
|
.bind = cs35l41_hda_bind,
|
|
.unbind = cs35l41_hda_unbind,
|
|
};
|
|
|
|
static irqreturn_t cs35l41_bst_short_err(int irq, void *data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = data;
|
|
|
|
dev_crit_ratelimited(cs35l41->dev, "LBST Error\n");
|
|
set_bit(CS35L41_BST_SHORT_ERR_RLS_SHIFT, &cs35l41->irq_errors);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cs35l41_bst_dcm_uvp_err(int irq, void *data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = data;
|
|
|
|
dev_crit_ratelimited(cs35l41->dev, "DCM VBST Under Voltage Error\n");
|
|
set_bit(CS35L41_BST_UVP_ERR_RLS_SHIFT, &cs35l41->irq_errors);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cs35l41_bst_ovp_err(int irq, void *data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = data;
|
|
|
|
dev_crit_ratelimited(cs35l41->dev, "VBST Over Voltage error\n");
|
|
set_bit(CS35L41_BST_OVP_ERR_RLS_SHIFT, &cs35l41->irq_errors);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cs35l41_temp_err(int irq, void *data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = data;
|
|
|
|
dev_crit_ratelimited(cs35l41->dev, "Over temperature error\n");
|
|
set_bit(CS35L41_TEMP_ERR_RLS_SHIFT, &cs35l41->irq_errors);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cs35l41_temp_warn(int irq, void *data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = data;
|
|
|
|
dev_crit_ratelimited(cs35l41->dev, "Over temperature warning\n");
|
|
set_bit(CS35L41_TEMP_WARN_ERR_RLS_SHIFT, &cs35l41->irq_errors);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cs35l41_amp_short(int irq, void *data)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = data;
|
|
|
|
dev_crit_ratelimited(cs35l41->dev, "Amp short error\n");
|
|
set_bit(CS35L41_AMP_SHORT_ERR_RLS_SHIFT, &cs35l41->irq_errors);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct cs35l41_irq cs35l41_irqs[] = {
|
|
CS35L41_IRQ(BST_OVP_ERR, "Boost Overvoltage Error", cs35l41_bst_ovp_err),
|
|
CS35L41_IRQ(BST_DCM_UVP_ERR, "Boost Undervoltage Error", cs35l41_bst_dcm_uvp_err),
|
|
CS35L41_IRQ(BST_SHORT_ERR, "Boost Inductor Short Error", cs35l41_bst_short_err),
|
|
CS35L41_IRQ(TEMP_WARN, "Temperature Warning", cs35l41_temp_warn),
|
|
CS35L41_IRQ(TEMP_ERR, "Temperature Error", cs35l41_temp_err),
|
|
CS35L41_IRQ(AMP_SHORT_ERR, "Amp Short", cs35l41_amp_short),
|
|
};
|
|
|
|
static const struct regmap_irq cs35l41_reg_irqs[] = {
|
|
CS35L41_REG_IRQ(IRQ1_STATUS1, BST_OVP_ERR),
|
|
CS35L41_REG_IRQ(IRQ1_STATUS1, BST_DCM_UVP_ERR),
|
|
CS35L41_REG_IRQ(IRQ1_STATUS1, BST_SHORT_ERR),
|
|
CS35L41_REG_IRQ(IRQ1_STATUS1, TEMP_WARN),
|
|
CS35L41_REG_IRQ(IRQ1_STATUS1, TEMP_ERR),
|
|
CS35L41_REG_IRQ(IRQ1_STATUS1, AMP_SHORT_ERR),
|
|
};
|
|
|
|
static const struct regmap_irq_chip cs35l41_regmap_irq_chip = {
|
|
.name = "cs35l41 IRQ1 Controller",
|
|
.status_base = CS35L41_IRQ1_STATUS1,
|
|
.mask_base = CS35L41_IRQ1_MASK1,
|
|
.ack_base = CS35L41_IRQ1_STATUS1,
|
|
.num_regs = 4,
|
|
.irqs = cs35l41_reg_irqs,
|
|
.num_irqs = ARRAY_SIZE(cs35l41_reg_irqs),
|
|
};
|
|
|
|
static int cs35l41_hda_apply_properties(struct cs35l41_hda *cs35l41)
|
|
{
|
|
struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
|
|
bool using_irq = false;
|
|
int irq, irq_pol;
|
|
int ret;
|
|
int i;
|
|
|
|
if (!cs35l41->hw_cfg.valid)
|
|
return -EINVAL;
|
|
|
|
ret = cs35l41_init_boost(cs35l41->dev, cs35l41->regmap, hw_cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (hw_cfg->gpio1.valid) {
|
|
switch (hw_cfg->gpio1.func) {
|
|
case CS35L41_NOT_USED:
|
|
break;
|
|
case CS35l41_VSPK_SWITCH:
|
|
hw_cfg->gpio1.func = CS35L41_GPIO1_GPIO;
|
|
hw_cfg->gpio1.out_en = true;
|
|
break;
|
|
case CS35l41_SYNC:
|
|
hw_cfg->gpio1.func = CS35L41_GPIO1_MDSYNC;
|
|
break;
|
|
default:
|
|
dev_err(cs35l41->dev, "Invalid function %d for GPIO1\n",
|
|
hw_cfg->gpio1.func);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (hw_cfg->gpio2.valid) {
|
|
switch (hw_cfg->gpio2.func) {
|
|
case CS35L41_NOT_USED:
|
|
break;
|
|
case CS35L41_INTERRUPT:
|
|
using_irq = true;
|
|
break;
|
|
default:
|
|
dev_err(cs35l41->dev, "Invalid GPIO2 function %d\n", hw_cfg->gpio2.func);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
irq_pol = cs35l41_gpio_config(cs35l41->regmap, hw_cfg);
|
|
|
|
if (cs35l41->irq && using_irq) {
|
|
ret = devm_regmap_add_irq_chip(cs35l41->dev, cs35l41->regmap, cs35l41->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED | irq_pol,
|
|
0, &cs35l41_regmap_irq_chip, &cs35l41->irq_data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cs35l41_irqs); i++) {
|
|
irq = regmap_irq_get_virq(cs35l41->irq_data, cs35l41_irqs[i].irq);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ret = devm_request_threaded_irq(cs35l41->dev, irq, NULL,
|
|
cs35l41_irqs[i].handler,
|
|
IRQF_ONESHOT | IRQF_SHARED | irq_pol,
|
|
cs35l41_irqs[i].name, cs35l41);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return cs35l41_hda_channel_map(cs35l41->dev, 0, NULL, 1, &hw_cfg->spk_pos);
|
|
}
|
|
|
|
static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, int id)
|
|
{
|
|
struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
|
|
u32 values[HDA_MAX_COMPONENTS];
|
|
struct acpi_device *adev;
|
|
struct device *physdev;
|
|
char *property;
|
|
size_t nval;
|
|
int i, ret;
|
|
|
|
adev = acpi_dev_get_first_match_dev(hid, NULL, -1);
|
|
if (!adev) {
|
|
dev_err(cs35l41->dev, "Failed to find an ACPI device for %s\n", hid);
|
|
return -ENODEV;
|
|
}
|
|
|
|
physdev = get_device(acpi_get_first_physical_node(adev));
|
|
acpi_dev_put(adev);
|
|
|
|
property = "cirrus,dev-index";
|
|
ret = device_property_count_u32(physdev, property);
|
|
if (ret <= 0)
|
|
goto no_acpi_dsd;
|
|
|
|
if (ret > ARRAY_SIZE(values)) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
nval = ret;
|
|
|
|
ret = device_property_read_u32_array(physdev, property, values, nval);
|
|
if (ret)
|
|
goto err;
|
|
|
|
cs35l41->index = -1;
|
|
for (i = 0; i < nval; i++) {
|
|
if (values[i] == id) {
|
|
cs35l41->index = i;
|
|
break;
|
|
}
|
|
}
|
|
if (cs35l41->index == -1) {
|
|
dev_err(cs35l41->dev, "No index found in %s\n", property);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
/* To use the same release code for all laptop variants we can't use devm_ version of
|
|
* gpiod_get here, as CLSA010* don't have a fully functional bios with an _DSD node
|
|
*/
|
|
cs35l41->reset_gpio = fwnode_gpiod_get_index(&adev->fwnode, "reset", cs35l41->index,
|
|
GPIOD_OUT_LOW, "cs35l41-reset");
|
|
|
|
property = "cirrus,speaker-position";
|
|
ret = device_property_read_u32_array(physdev, property, values, nval);
|
|
if (ret)
|
|
goto err;
|
|
hw_cfg->spk_pos = values[cs35l41->index];
|
|
|
|
cs35l41->channel_index = 0;
|
|
for (i = 0; i < cs35l41->index; i++)
|
|
if (values[i] == hw_cfg->spk_pos)
|
|
cs35l41->channel_index++;
|
|
|
|
property = "cirrus,gpio1-func";
|
|
ret = device_property_read_u32_array(physdev, property, values, nval);
|
|
if (ret)
|
|
goto err;
|
|
hw_cfg->gpio1.func = values[cs35l41->index];
|
|
hw_cfg->gpio1.valid = true;
|
|
|
|
property = "cirrus,gpio2-func";
|
|
ret = device_property_read_u32_array(physdev, property, values, nval);
|
|
if (ret)
|
|
goto err;
|
|
hw_cfg->gpio2.func = values[cs35l41->index];
|
|
hw_cfg->gpio2.valid = true;
|
|
|
|
property = "cirrus,boost-peak-milliamp";
|
|
ret = device_property_read_u32_array(physdev, property, values, nval);
|
|
if (ret == 0)
|
|
hw_cfg->bst_ipk = values[cs35l41->index];
|
|
else
|
|
hw_cfg->bst_ipk = -1;
|
|
|
|
property = "cirrus,boost-ind-nanohenry";
|
|
ret = device_property_read_u32_array(physdev, property, values, nval);
|
|
if (ret == 0)
|
|
hw_cfg->bst_ind = values[cs35l41->index];
|
|
else
|
|
hw_cfg->bst_ind = -1;
|
|
|
|
property = "cirrus,boost-cap-microfarad";
|
|
ret = device_property_read_u32_array(physdev, property, values, nval);
|
|
if (ret == 0)
|
|
hw_cfg->bst_cap = values[cs35l41->index];
|
|
else
|
|
hw_cfg->bst_cap = -1;
|
|
|
|
if (hw_cfg->bst_ind > 0 || hw_cfg->bst_cap > 0 || hw_cfg->bst_ipk > 0)
|
|
hw_cfg->bst_type = CS35L41_INT_BOOST;
|
|
else
|
|
hw_cfg->bst_type = CS35L41_EXT_BOOST;
|
|
|
|
hw_cfg->valid = true;
|
|
put_device(physdev);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
put_device(physdev);
|
|
dev_err(cs35l41->dev, "Failed property %s: %d\n", property, ret);
|
|
|
|
return ret;
|
|
|
|
no_acpi_dsd:
|
|
/*
|
|
* Device CLSA0100 doesn't have _DSD so a gpiod_get by the label reset won't work.
|
|
* And devices created by i2c-multi-instantiate don't have their device struct pointing to
|
|
* the correct fwnode, so acpi_dev must be used here.
|
|
* And devm functions expect that the device requesting the resource has the correct
|
|
* fwnode.
|
|
*/
|
|
if (strncmp(hid, "CLSA0100", 8) != 0)
|
|
return -EINVAL;
|
|
|
|
/* check I2C address to assign the index */
|
|
cs35l41->index = id == 0x40 ? 0 : 1;
|
|
cs35l41->hw_cfg.spk_pos = cs35l41->index;
|
|
cs35l41->channel_index = 0;
|
|
cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
|
|
cs35l41->hw_cfg.bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
|
|
hw_cfg->gpio2.func = CS35L41_GPIO2_INT_OPEN_DRAIN;
|
|
hw_cfg->gpio2.valid = true;
|
|
cs35l41->hw_cfg.valid = true;
|
|
put_device(physdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int irq,
|
|
struct regmap *regmap)
|
|
{
|
|
unsigned int int_sts, regid, reg_revid, mtl_revid, chipid, int_status;
|
|
struct cs35l41_hda *cs35l41;
|
|
int ret;
|
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(cs35l41_irqs) != ARRAY_SIZE(cs35l41_reg_irqs));
|
|
BUILD_BUG_ON(ARRAY_SIZE(cs35l41_irqs) != CS35L41_NUM_IRQ);
|
|
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
cs35l41 = devm_kzalloc(dev, sizeof(*cs35l41), GFP_KERNEL);
|
|
if (!cs35l41)
|
|
return -ENOMEM;
|
|
|
|
cs35l41->dev = dev;
|
|
cs35l41->irq = irq;
|
|
cs35l41->regmap = regmap;
|
|
dev_set_drvdata(dev, cs35l41);
|
|
|
|
ret = cs35l41_hda_read_acpi(cs35l41, device_name, id);
|
|
if (ret) {
|
|
dev_err_probe(cs35l41->dev, ret, "Platform not supported %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (IS_ERR(cs35l41->reset_gpio)) {
|
|
ret = PTR_ERR(cs35l41->reset_gpio);
|
|
cs35l41->reset_gpio = NULL;
|
|
if (ret == -EBUSY) {
|
|
dev_info(cs35l41->dev, "Reset line busy, assuming shared reset\n");
|
|
} else {
|
|
dev_err_probe(cs35l41->dev, ret, "Failed to get reset GPIO: %d\n", ret);
|
|
goto err;
|
|
}
|
|
}
|
|
if (cs35l41->reset_gpio) {
|
|
usleep_range(2000, 2100);
|
|
gpiod_set_value_cansleep(cs35l41->reset_gpio, 1);
|
|
}
|
|
|
|
usleep_range(2000, 2100);
|
|
|
|
ret = regmap_read_poll_timeout(cs35l41->regmap, CS35L41_IRQ1_STATUS4, int_status,
|
|
int_status & CS35L41_OTP_BOOT_DONE, 1000, 100000);
|
|
if (ret) {
|
|
dev_err(cs35l41->dev, "Failed waiting for OTP_BOOT_DONE: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(cs35l41->regmap, CS35L41_IRQ1_STATUS3, &int_sts);
|
|
if (ret || (int_sts & CS35L41_OTP_BOOT_ERR)) {
|
|
dev_err(cs35l41->dev, "OTP Boot status %x error: %d\n",
|
|
int_sts & CS35L41_OTP_BOOT_ERR, ret);
|
|
ret = -EIO;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(cs35l41->regmap, CS35L41_DEVID, ®id);
|
|
if (ret) {
|
|
dev_err(cs35l41->dev, "Get Device ID failed: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(cs35l41->regmap, CS35L41_REVID, ®_revid);
|
|
if (ret) {
|
|
dev_err(cs35l41->dev, "Get Revision ID failed: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
mtl_revid = reg_revid & CS35L41_MTLREVID_MASK;
|
|
|
|
chipid = (mtl_revid % 2) ? CS35L41R_CHIP_ID : CS35L41_CHIP_ID;
|
|
if (regid != chipid) {
|
|
dev_err(cs35l41->dev, "CS35L41 Device ID (%X). Expected ID %X\n", regid, chipid);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
ret = cs35l41_test_key_unlock(cs35l41->dev, cs35l41->regmap);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = cs35l41_register_errata_patch(cs35l41->dev, cs35l41->regmap, reg_revid);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = cs35l41_otp_unpack(cs35l41->dev, cs35l41->regmap);
|
|
if (ret) {
|
|
dev_err(cs35l41->dev, "OTP Unpack failed: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = cs35l41_test_key_lock(cs35l41->dev, cs35l41->regmap);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = cs35l41_hda_apply_properties(cs35l41);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = component_add(cs35l41->dev, &cs35l41_hda_comp_ops);
|
|
if (ret) {
|
|
dev_err(cs35l41->dev, "Register component failed: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(cs35l41->dev, "Cirrus Logic CS35L41 (%x), Revision: %02X\n", regid, reg_revid);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
if (cs35l41_safe_reset(cs35l41->regmap, cs35l41->hw_cfg.bst_type))
|
|
gpiod_set_value_cansleep(cs35l41->reset_gpio, 0);
|
|
gpiod_put(cs35l41->reset_gpio);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs35l41_hda_probe, SND_HDA_SCODEC_CS35L41);
|
|
|
|
void cs35l41_hda_remove(struct device *dev)
|
|
{
|
|
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
|
|
|
|
component_del(cs35l41->dev, &cs35l41_hda_comp_ops);
|
|
|
|
if (cs35l41_safe_reset(cs35l41->regmap, cs35l41->hw_cfg.bst_type))
|
|
gpiod_set_value_cansleep(cs35l41->reset_gpio, 0);
|
|
gpiod_put(cs35l41->reset_gpio);
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs35l41_hda_remove, SND_HDA_SCODEC_CS35L41);
|
|
|
|
MODULE_DESCRIPTION("CS35L41 HDA Driver");
|
|
MODULE_AUTHOR("Lucas Tanure, Cirrus Logic Inc, <tanureal@opensource.cirrus.com>");
|
|
MODULE_LICENSE("GPL");
|