mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 06:55:13 +08:00
d842a31f12
The driver fails to check the results of DMA mapping and results in the following warning: (with kernel config "CONFIG_DMA_API_DEBUG" enable) ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:937 check_unmap+0x43c/0x7d8() fec 2188000.ethernet: DMA-API: device driver failed to check map error[device address=0x00000000383a8040] [size=2048 bytes] [mapped as single] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.17-16827-g9cdb0ba-dirty #188 [<80013c4c>] (unwind_backtrace+0x0/0xf8) from [<80011704>] (show_stack+0x10/0x14) [<80011704>] (show_stack+0x10/0x14) from [<80025614>] (warn_slowpath_common+0x4c/0x6c) [<80025614>] (warn_slowpath_common+0x4c/0x6c) from [<800256c8>] (warn_slowpath_fmt+0x30/0x40) [<800256c8>] (warn_slowpath_fmt+0x30/0x40) from [<8026bfdc>] (check_unmap+0x43c/0x7d8) [<8026bfdc>] (check_unmap+0x43c/0x7d8) from [<8026c584>] (debug_dma_unmap_page+0x6c/0x78) [<8026c584>] (debug_dma_unmap_page+0x6c/0x78) from [<8038049c>] (fec_enet_rx_napi+0x254/0x8a8) [<8038049c>] (fec_enet_rx_napi+0x254/0x8a8) from [<804dc8c0>] (net_rx_action+0x94/0x160) [<804dc8c0>] (net_rx_action+0x94/0x160) from [<8002c758>] (__do_softirq+0xe8/0x1d0) [<8002c758>] (__do_softirq+0xe8/0x1d0) from [<8002c8e8>] (do_softirq+0x4c/0x58) [<8002c8e8>] (do_softirq+0x4c/0x58) from [<8002cb50>] (irq_exit+0x90/0xc8) [<8002cb50>] (irq_exit+0x90/0xc8) from [<8000ea88>] (handle_IRQ+0x3c/0x94) [<8000ea88>] (handle_IRQ+0x3c/0x94) from [<8000855c>] (gic_handle_irq+0x28/0x5c) [<8000855c>] (gic_handle_irq+0x28/0x5c) from [<8000de00>] (__irq_svc+0x40/0x50) Exception stack(0x815a5f38 to 0x815a5f80) 5f20: 815a5f80 3b9aca00 5f40: 0fe52383 00000002 0dd8950e 00000002 81e7b080 00000000 00000000 815ac4d8 5f60: 806032ec 00000000 00000017 815a5f80 80059028 8041fc4c 60000013 ffffffff [<8000de00>] (__irq_svc+0x40/0x50) from [<8041fc4c>] (cpuidle_enter_state+0x50/0xf0) [<8041fc4c>] (cpuidle_enter_state+0x50/0xf0) from [<8041fd94>] (cpuidle_idle_call+0xa8/0x14c) [<8041fd94>] (cpuidle_idle_call+0xa8/0x14c) from [<8000edac>] (arch_cpu_idle+0x10/0x4c) [<8000edac>] (arch_cpu_idle+0x10/0x4c) from [<800582f8>] (cpu_startup_entry+0x60/0x130) [<800582f8>] (cpu_startup_entry+0x60/0x130) from [<80bc7a48>] (start_kernel+0x2d0/0x328) [<80bc7a48>] (start_kernel+0x2d0/0x328) from [<10008074>] (0x10008074) ---[ end trace c6edec32436e0042 ]--- Because dma-debug add new interfaces to debug dma mapping errors, pls refer to: http://lwn.net/Articles/516640/ After dma mapping, it must call dma_mapping_error() to check mapping error, otherwise the map_err_type alway is MAP_ERR_NOT_CHECKED, check_unmap() define the mapping is not checked and dump the error msg. So,add dma_mapping_error() checking to fix the WARNING And RX DMA buffers are used repeatedly and the driver copies it into an skb, fec_enet_rx() should not map or unmap, use dma_sync_single_for_cpu()/dma_sync_single_for_device() instead of dma_map_single()/dma_unmap_single(). There have another potential issue: fec_enet_rx() passes the DMA address to __va(). Physical and DMA addresses are *not* the same thing. They may differ if the device is behind an IOMMU or bounce buffering was required, or just because there is a fixed offset between the device and host physical addresses. Also fix it in this patch. ============================================= V2: add net_ratelimit() to limit map err message. use dma_sync_single_for_cpu() instead of dma_map_single(). fix the issue that pass DMA addresses to __va() to get virture address. V1: initial send ============================================= Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2388 lines
61 KiB
C
2388 lines
61 KiB
C
/*
|
|
* Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
|
|
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
|
|
*
|
|
* Right now, I am very wasteful with the buffers. I allocate memory
|
|
* pages and then divide them into 2K frame buffers. This way I know I
|
|
* have buffers large enough to hold one frame within one buffer descriptor.
|
|
* Once I get this working, I will use 64 or 128 byte CPM buffers, which
|
|
* will be much more memory efficient and will easily handle lots of
|
|
* small packets.
|
|
*
|
|
* Much better multiple PHY support by Magnus Damm.
|
|
* Copyright (c) 2000 Ericsson Radio Systems AB.
|
|
*
|
|
* Support for FEC controller of ColdFire processors.
|
|
* Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com)
|
|
*
|
|
* Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
|
|
* Copyright (c) 2004-2006 Macq Electronique SA.
|
|
*
|
|
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ip.h>
|
|
#include <net/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/icmp.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/fec.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/if_vlan.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include "fec.h"
|
|
|
|
static void set_multicast_list(struct net_device *ndev);
|
|
|
|
#if defined(CONFIG_ARM)
|
|
#define FEC_ALIGNMENT 0xf
|
|
#else
|
|
#define FEC_ALIGNMENT 0x3
|
|
#endif
|
|
|
|
#define DRIVER_NAME "fec"
|
|
|
|
/* Pause frame feild and FIFO threshold */
|
|
#define FEC_ENET_FCE (1 << 5)
|
|
#define FEC_ENET_RSEM_V 0x84
|
|
#define FEC_ENET_RSFL_V 16
|
|
#define FEC_ENET_RAEM_V 0x8
|
|
#define FEC_ENET_RAFL_V 0x8
|
|
#define FEC_ENET_OPD_V 0xFFF0
|
|
|
|
/* Controller is ENET-MAC */
|
|
#define FEC_QUIRK_ENET_MAC (1 << 0)
|
|
/* Controller needs driver to swap frame */
|
|
#define FEC_QUIRK_SWAP_FRAME (1 << 1)
|
|
/* Controller uses gasket */
|
|
#define FEC_QUIRK_USE_GASKET (1 << 2)
|
|
/* Controller has GBIT support */
|
|
#define FEC_QUIRK_HAS_GBIT (1 << 3)
|
|
/* Controller has extend desc buffer */
|
|
#define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4)
|
|
/* Controller has hardware checksum support */
|
|
#define FEC_QUIRK_HAS_CSUM (1 << 5)
|
|
/* Controller has hardware vlan support */
|
|
#define FEC_QUIRK_HAS_VLAN (1 << 6)
|
|
/* ENET IP errata ERR006358
|
|
*
|
|
* If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously
|
|
* detected as not set during a prior frame transmission, then the
|
|
* ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs
|
|
* were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in
|
|
* If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously
|
|
* detected as not set during a prior frame transmission, then the
|
|
* ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs
|
|
* were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in
|
|
* frames not being transmitted until there is a 0-to-1 transition on
|
|
* ENET_TDAR[TDAR].
|
|
*/
|
|
#define FEC_QUIRK_ERR006358 (1 << 7)
|
|
|
|
static struct platform_device_id fec_devtype[] = {
|
|
{
|
|
/* keep it for coldfire */
|
|
.name = DRIVER_NAME,
|
|
.driver_data = 0,
|
|
}, {
|
|
.name = "imx25-fec",
|
|
.driver_data = FEC_QUIRK_USE_GASKET,
|
|
}, {
|
|
.name = "imx27-fec",
|
|
.driver_data = 0,
|
|
}, {
|
|
.name = "imx28-fec",
|
|
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
|
|
}, {
|
|
.name = "imx6q-fec",
|
|
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
|
|
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
|
|
FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358,
|
|
}, {
|
|
.name = "mvf600-fec",
|
|
.driver_data = FEC_QUIRK_ENET_MAC,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, fec_devtype);
|
|
|
|
enum imx_fec_type {
|
|
IMX25_FEC = 1, /* runs on i.mx25/50/53 */
|
|
IMX27_FEC, /* runs on i.mx27/35/51 */
|
|
IMX28_FEC,
|
|
IMX6Q_FEC,
|
|
MVF600_FEC,
|
|
};
|
|
|
|
static const struct of_device_id fec_dt_ids[] = {
|
|
{ .compatible = "fsl,imx25-fec", .data = &fec_devtype[IMX25_FEC], },
|
|
{ .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], },
|
|
{ .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], },
|
|
{ .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], },
|
|
{ .compatible = "fsl,mvf600-fec", .data = &fec_devtype[MVF600_FEC], },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fec_dt_ids);
|
|
|
|
static unsigned char macaddr[ETH_ALEN];
|
|
module_param_array(macaddr, byte, NULL, 0);
|
|
MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
|
|
|
|
#if defined(CONFIG_M5272)
|
|
/*
|
|
* Some hardware gets it MAC address out of local flash memory.
|
|
* if this is non-zero then assume it is the address to get MAC from.
|
|
*/
|
|
#if defined(CONFIG_NETtel)
|
|
#define FEC_FLASHMAC 0xf0006006
|
|
#elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES)
|
|
#define FEC_FLASHMAC 0xf0006000
|
|
#elif defined(CONFIG_CANCam)
|
|
#define FEC_FLASHMAC 0xf0020000
|
|
#elif defined (CONFIG_M5272C3)
|
|
#define FEC_FLASHMAC (0xffe04000 + 4)
|
|
#elif defined(CONFIG_MOD5272)
|
|
#define FEC_FLASHMAC 0xffc0406b
|
|
#else
|
|
#define FEC_FLASHMAC 0
|
|
#endif
|
|
#endif /* CONFIG_M5272 */
|
|
|
|
#if (((RX_RING_SIZE + TX_RING_SIZE) * 32) > PAGE_SIZE)
|
|
#error "FEC: descriptor ring size constants too large"
|
|
#endif
|
|
|
|
/* Interrupt events/masks. */
|
|
#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
|
|
#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
|
|
#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
|
|
#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
|
|
#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
|
|
#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
|
|
#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
|
|
#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
|
|
#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
|
|
#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
|
|
|
|
#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII)
|
|
#define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF))
|
|
|
|
/* The FEC stores dest/src/type/vlan, data, and checksum for receive packets.
|
|
*/
|
|
#define PKT_MAXBUF_SIZE 1522
|
|
#define PKT_MINBUF_SIZE 64
|
|
#define PKT_MAXBLR_SIZE 1536
|
|
|
|
/* FEC receive acceleration */
|
|
#define FEC_RACC_IPDIS (1 << 1)
|
|
#define FEC_RACC_PRODIS (1 << 2)
|
|
#define FEC_RACC_OPTIONS (FEC_RACC_IPDIS | FEC_RACC_PRODIS)
|
|
|
|
/*
|
|
* The 5270/5271/5280/5282/532x RX control register also contains maximum frame
|
|
* size bits. Other FEC hardware does not, so we need to take that into
|
|
* account when setting it.
|
|
*/
|
|
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
|
|
defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
|
|
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
|
|
#else
|
|
#define OPT_FRAME_SIZE 0
|
|
#endif
|
|
|
|
/* FEC MII MMFR bits definition */
|
|
#define FEC_MMFR_ST (1 << 30)
|
|
#define FEC_MMFR_OP_READ (2 << 28)
|
|
#define FEC_MMFR_OP_WRITE (1 << 28)
|
|
#define FEC_MMFR_PA(v) ((v & 0x1f) << 23)
|
|
#define FEC_MMFR_RA(v) ((v & 0x1f) << 18)
|
|
#define FEC_MMFR_TA (2 << 16)
|
|
#define FEC_MMFR_DATA(v) (v & 0xffff)
|
|
|
|
#define FEC_MII_TIMEOUT 30000 /* us */
|
|
|
|
/* Transmitter timeout */
|
|
#define TX_TIMEOUT (2 * HZ)
|
|
|
|
#define FEC_PAUSE_FLAG_AUTONEG 0x1
|
|
#define FEC_PAUSE_FLAG_ENABLE 0x2
|
|
|
|
static int mii_cnt;
|
|
|
|
static inline
|
|
struct bufdesc *fec_enet_get_nextdesc(struct bufdesc *bdp, struct fec_enet_private *fep)
|
|
{
|
|
struct bufdesc *new_bd = bdp + 1;
|
|
struct bufdesc_ex *ex_new_bd = (struct bufdesc_ex *)bdp + 1;
|
|
struct bufdesc_ex *ex_base;
|
|
struct bufdesc *base;
|
|
int ring_size;
|
|
|
|
if (bdp >= fep->tx_bd_base) {
|
|
base = fep->tx_bd_base;
|
|
ring_size = fep->tx_ring_size;
|
|
ex_base = (struct bufdesc_ex *)fep->tx_bd_base;
|
|
} else {
|
|
base = fep->rx_bd_base;
|
|
ring_size = fep->rx_ring_size;
|
|
ex_base = (struct bufdesc_ex *)fep->rx_bd_base;
|
|
}
|
|
|
|
if (fep->bufdesc_ex)
|
|
return (struct bufdesc *)((ex_new_bd >= (ex_base + ring_size)) ?
|
|
ex_base : ex_new_bd);
|
|
else
|
|
return (new_bd >= (base + ring_size)) ?
|
|
base : new_bd;
|
|
}
|
|
|
|
static inline
|
|
struct bufdesc *fec_enet_get_prevdesc(struct bufdesc *bdp, struct fec_enet_private *fep)
|
|
{
|
|
struct bufdesc *new_bd = bdp - 1;
|
|
struct bufdesc_ex *ex_new_bd = (struct bufdesc_ex *)bdp - 1;
|
|
struct bufdesc_ex *ex_base;
|
|
struct bufdesc *base;
|
|
int ring_size;
|
|
|
|
if (bdp >= fep->tx_bd_base) {
|
|
base = fep->tx_bd_base;
|
|
ring_size = fep->tx_ring_size;
|
|
ex_base = (struct bufdesc_ex *)fep->tx_bd_base;
|
|
} else {
|
|
base = fep->rx_bd_base;
|
|
ring_size = fep->rx_ring_size;
|
|
ex_base = (struct bufdesc_ex *)fep->rx_bd_base;
|
|
}
|
|
|
|
if (fep->bufdesc_ex)
|
|
return (struct bufdesc *)((ex_new_bd < ex_base) ?
|
|
(ex_new_bd + ring_size) : ex_new_bd);
|
|
else
|
|
return (new_bd < base) ? (new_bd + ring_size) : new_bd;
|
|
}
|
|
|
|
static void *swap_buffer(void *bufaddr, int len)
|
|
{
|
|
int i;
|
|
unsigned int *buf = bufaddr;
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(len, 4); i++, buf++)
|
|
*buf = cpu_to_be32(*buf);
|
|
|
|
return bufaddr;
|
|
}
|
|
|
|
static int
|
|
fec_enet_clear_csum(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
/* Only run for packets requiring a checksum. */
|
|
if (skb->ip_summed != CHECKSUM_PARTIAL)
|
|
return 0;
|
|
|
|
if (unlikely(skb_cow_head(skb, 0)))
|
|
return -1;
|
|
|
|
*(__sum16 *)(skb->head + skb->csum_start + skb->csum_offset) = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static netdev_tx_t
|
|
fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct bufdesc *bdp, *bdp_pre;
|
|
void *bufaddr;
|
|
unsigned short status;
|
|
unsigned int index;
|
|
|
|
/* Fill in a Tx ring entry */
|
|
bdp = fep->cur_tx;
|
|
|
|
status = bdp->cbd_sc;
|
|
|
|
if (status & BD_ENET_TX_READY) {
|
|
/* Ooops. All transmit buffers are full. Bail out.
|
|
* This should not happen, since ndev->tbusy should be set.
|
|
*/
|
|
netdev_err(ndev, "tx queue full!\n");
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Protocol checksum off-load for TCP and UDP. */
|
|
if (fec_enet_clear_csum(skb, ndev)) {
|
|
kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Clear all of the status flags */
|
|
status &= ~BD_ENET_TX_STATS;
|
|
|
|
/* Set buffer length and buffer pointer */
|
|
bufaddr = skb->data;
|
|
bdp->cbd_datlen = skb->len;
|
|
|
|
/*
|
|
* On some FEC implementations data must be aligned on
|
|
* 4-byte boundaries. Use bounce buffers to copy data
|
|
* and get it aligned. Ugh.
|
|
*/
|
|
if (fep->bufdesc_ex)
|
|
index = (struct bufdesc_ex *)bdp -
|
|
(struct bufdesc_ex *)fep->tx_bd_base;
|
|
else
|
|
index = bdp - fep->tx_bd_base;
|
|
|
|
if (((unsigned long) bufaddr) & FEC_ALIGNMENT) {
|
|
memcpy(fep->tx_bounce[index], skb->data, skb->len);
|
|
bufaddr = fep->tx_bounce[index];
|
|
}
|
|
|
|
/*
|
|
* Some design made an incorrect assumption on endian mode of
|
|
* the system that it's running on. As the result, driver has to
|
|
* swap every frame going to and coming from the controller.
|
|
*/
|
|
if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
|
|
swap_buffer(bufaddr, skb->len);
|
|
|
|
/* Save skb pointer */
|
|
fep->tx_skbuff[index] = skb;
|
|
|
|
/* Push the data cache so the CPM does not get stale memory
|
|
* data.
|
|
*/
|
|
bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr,
|
|
FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
|
|
if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) {
|
|
bdp->cbd_bufaddr = 0;
|
|
fep->tx_skbuff[index] = NULL;
|
|
dev_kfree_skb_any(skb);
|
|
if (net_ratelimit())
|
|
netdev_err(ndev, "Tx DMA memory map failed\n");
|
|
return NETDEV_TX_OK;
|
|
}
|
|
/* Send it on its way. Tell FEC it's ready, interrupt when done,
|
|
* it's the last BD of the frame, and to put the CRC on the end.
|
|
*/
|
|
status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
|
|
| BD_ENET_TX_LAST | BD_ENET_TX_TC);
|
|
bdp->cbd_sc = status;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
ebdp->cbd_bdu = 0;
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
|
|
fep->hwts_tx_en)) {
|
|
ebdp->cbd_esc = (BD_ENET_TX_TS | BD_ENET_TX_INT);
|
|
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
|
|
} else {
|
|
ebdp->cbd_esc = BD_ENET_TX_INT;
|
|
|
|
/* Enable protocol checksum flags
|
|
* We do not bother with the IP Checksum bits as they
|
|
* are done by the kernel
|
|
*/
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL)
|
|
ebdp->cbd_esc |= BD_ENET_TX_PINS;
|
|
}
|
|
}
|
|
|
|
bdp_pre = fec_enet_get_prevdesc(bdp, fep);
|
|
if ((id_entry->driver_data & FEC_QUIRK_ERR006358) &&
|
|
!(bdp_pre->cbd_sc & BD_ENET_TX_READY)) {
|
|
fep->delay_work.trig_tx = true;
|
|
schedule_delayed_work(&(fep->delay_work.delay_work),
|
|
msecs_to_jiffies(1));
|
|
}
|
|
|
|
/* If this was the last BD in the ring, start at the beginning again. */
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
|
|
fep->cur_tx = bdp;
|
|
|
|
if (fep->cur_tx == fep->dirty_tx)
|
|
netif_stop_queue(ndev);
|
|
|
|
/* Trigger transmission start */
|
|
writel(0, fep->hwp + FEC_X_DES_ACTIVE);
|
|
|
|
skb_tx_timestamp(skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Init RX & TX buffer descriptors
|
|
*/
|
|
static void fec_enet_bd_init(struct net_device *dev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(dev);
|
|
struct bufdesc *bdp;
|
|
unsigned int i;
|
|
|
|
/* Initialize the receive buffer descriptors. */
|
|
bdp = fep->rx_bd_base;
|
|
for (i = 0; i < fep->rx_ring_size; i++) {
|
|
|
|
/* Initialize the BD for every fragment in the page. */
|
|
if (bdp->cbd_bufaddr)
|
|
bdp->cbd_sc = BD_ENET_RX_EMPTY;
|
|
else
|
|
bdp->cbd_sc = 0;
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
}
|
|
|
|
/* Set the last buffer to wrap */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
|
|
fep->cur_rx = fep->rx_bd_base;
|
|
|
|
/* ...and the same for transmit */
|
|
bdp = fep->tx_bd_base;
|
|
fep->cur_tx = bdp;
|
|
for (i = 0; i < fep->tx_ring_size; i++) {
|
|
|
|
/* Initialize the BD for every fragment in the page. */
|
|
bdp->cbd_sc = 0;
|
|
if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) {
|
|
dev_kfree_skb_any(fep->tx_skbuff[i]);
|
|
fep->tx_skbuff[i] = NULL;
|
|
}
|
|
bdp->cbd_bufaddr = 0;
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
}
|
|
|
|
/* Set the last buffer to wrap */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
fep->dirty_tx = bdp;
|
|
}
|
|
|
|
/* This function is called to start or restart the FEC during a link
|
|
* change. This only happens when switching between half and full
|
|
* duplex.
|
|
*/
|
|
static void
|
|
fec_restart(struct net_device *ndev, int duplex)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
int i;
|
|
u32 val;
|
|
u32 temp_mac[2];
|
|
u32 rcntl = OPT_FRAME_SIZE | 0x04;
|
|
u32 ecntl = 0x2; /* ETHEREN */
|
|
|
|
if (netif_running(ndev)) {
|
|
netif_device_detach(ndev);
|
|
napi_disable(&fep->napi);
|
|
netif_stop_queue(ndev);
|
|
netif_tx_lock_bh(ndev);
|
|
}
|
|
|
|
/* Whack a reset. We should wait for this. */
|
|
writel(1, fep->hwp + FEC_ECNTRL);
|
|
udelay(10);
|
|
|
|
/*
|
|
* enet-mac reset will reset mac address registers too,
|
|
* so need to reconfigure it.
|
|
*/
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN);
|
|
writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
|
|
writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
|
|
}
|
|
|
|
/* Clear any outstanding interrupt. */
|
|
writel(0xffc00000, fep->hwp + FEC_IEVENT);
|
|
|
|
/* Setup multicast filter. */
|
|
set_multicast_list(ndev);
|
|
#ifndef CONFIG_M5272
|
|
writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
|
|
writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
|
|
#endif
|
|
|
|
/* Set maximum receive buffer size. */
|
|
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
|
|
|
|
fec_enet_bd_init(ndev);
|
|
|
|
/* Set receive and transmit descriptor base. */
|
|
writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
|
|
if (fep->bufdesc_ex)
|
|
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc_ex)
|
|
* fep->rx_ring_size, fep->hwp + FEC_X_DES_START);
|
|
else
|
|
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc)
|
|
* fep->rx_ring_size, fep->hwp + FEC_X_DES_START);
|
|
|
|
|
|
for (i = 0; i <= TX_RING_MOD_MASK; i++) {
|
|
if (fep->tx_skbuff[i]) {
|
|
dev_kfree_skb_any(fep->tx_skbuff[i]);
|
|
fep->tx_skbuff[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Enable MII mode */
|
|
if (duplex) {
|
|
/* FD enable */
|
|
writel(0x04, fep->hwp + FEC_X_CNTRL);
|
|
} else {
|
|
/* No Rcv on Xmit */
|
|
rcntl |= 0x02;
|
|
writel(0x0, fep->hwp + FEC_X_CNTRL);
|
|
}
|
|
|
|
fep->full_duplex = duplex;
|
|
|
|
/* Set MII speed */
|
|
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
|
|
|
|
#if !defined(CONFIG_M5272)
|
|
/* set RX checksum */
|
|
val = readl(fep->hwp + FEC_RACC);
|
|
if (fep->csum_flags & FLAG_RX_CSUM_ENABLED)
|
|
val |= FEC_RACC_OPTIONS;
|
|
else
|
|
val &= ~FEC_RACC_OPTIONS;
|
|
writel(val, fep->hwp + FEC_RACC);
|
|
#endif
|
|
|
|
/*
|
|
* The phy interface and speed need to get configured
|
|
* differently on enet-mac.
|
|
*/
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
/* Enable flow control and length check */
|
|
rcntl |= 0x40000000 | 0x00000020;
|
|
|
|
/* RGMII, RMII or MII */
|
|
if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII)
|
|
rcntl |= (1 << 6);
|
|
else if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
rcntl |= (1 << 8);
|
|
else
|
|
rcntl &= ~(1 << 8);
|
|
|
|
/* 1G, 100M or 10M */
|
|
if (fep->phy_dev) {
|
|
if (fep->phy_dev->speed == SPEED_1000)
|
|
ecntl |= (1 << 5);
|
|
else if (fep->phy_dev->speed == SPEED_100)
|
|
rcntl &= ~(1 << 9);
|
|
else
|
|
rcntl |= (1 << 9);
|
|
}
|
|
} else {
|
|
#ifdef FEC_MIIGSK_ENR
|
|
if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) {
|
|
u32 cfgr;
|
|
/* disable the gasket and wait */
|
|
writel(0, fep->hwp + FEC_MIIGSK_ENR);
|
|
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
|
|
udelay(1);
|
|
|
|
/*
|
|
* configure the gasket:
|
|
* RMII, 50 MHz, no loopback, no echo
|
|
* MII, 25 MHz, no loopback, no echo
|
|
*/
|
|
cfgr = (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
? BM_MIIGSK_CFGR_RMII : BM_MIIGSK_CFGR_MII;
|
|
if (fep->phy_dev && fep->phy_dev->speed == SPEED_10)
|
|
cfgr |= BM_MIIGSK_CFGR_FRCONT_10M;
|
|
writel(cfgr, fep->hwp + FEC_MIIGSK_CFGR);
|
|
|
|
/* re-enable the gasket */
|
|
writel(2, fep->hwp + FEC_MIIGSK_ENR);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if !defined(CONFIG_M5272)
|
|
/* enable pause frame*/
|
|
if ((fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) ||
|
|
((fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) &&
|
|
fep->phy_dev && fep->phy_dev->pause)) {
|
|
rcntl |= FEC_ENET_FCE;
|
|
|
|
/* set FIFO threshold parameter to reduce overrun */
|
|
writel(FEC_ENET_RSEM_V, fep->hwp + FEC_R_FIFO_RSEM);
|
|
writel(FEC_ENET_RSFL_V, fep->hwp + FEC_R_FIFO_RSFL);
|
|
writel(FEC_ENET_RAEM_V, fep->hwp + FEC_R_FIFO_RAEM);
|
|
writel(FEC_ENET_RAFL_V, fep->hwp + FEC_R_FIFO_RAFL);
|
|
|
|
/* OPD */
|
|
writel(FEC_ENET_OPD_V, fep->hwp + FEC_OPD);
|
|
} else {
|
|
rcntl &= ~FEC_ENET_FCE;
|
|
}
|
|
#endif /* !defined(CONFIG_M5272) */
|
|
|
|
writel(rcntl, fep->hwp + FEC_R_CNTRL);
|
|
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
/* enable ENET endian swap */
|
|
ecntl |= (1 << 8);
|
|
/* enable ENET store and forward mode */
|
|
writel(1 << 8, fep->hwp + FEC_X_WMRK);
|
|
}
|
|
|
|
if (fep->bufdesc_ex)
|
|
ecntl |= (1 << 4);
|
|
|
|
#ifndef CONFIG_M5272
|
|
/* Enable the MIB statistic event counters */
|
|
writel(0 << 31, fep->hwp + FEC_MIB_CTRLSTAT);
|
|
#endif
|
|
|
|
/* And last, enable the transmit and receive processing */
|
|
writel(ecntl, fep->hwp + FEC_ECNTRL);
|
|
writel(0, fep->hwp + FEC_R_DES_ACTIVE);
|
|
|
|
if (fep->bufdesc_ex)
|
|
fec_ptp_start_cyclecounter(ndev);
|
|
|
|
/* Enable interrupts we wish to service */
|
|
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
|
|
|
|
if (netif_running(ndev)) {
|
|
netif_tx_unlock_bh(ndev);
|
|
netif_wake_queue(ndev);
|
|
napi_enable(&fep->napi);
|
|
netif_device_attach(ndev);
|
|
}
|
|
}
|
|
|
|
static void
|
|
fec_stop(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
|
|
|
|
/* We cannot expect a graceful transmit stop without link !!! */
|
|
if (fep->link) {
|
|
writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
|
|
udelay(10);
|
|
if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
|
|
netdev_err(ndev, "Graceful transmit stop did not complete!\n");
|
|
}
|
|
|
|
/* Whack a reset. We should wait for this. */
|
|
writel(1, fep->hwp + FEC_ECNTRL);
|
|
udelay(10);
|
|
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
|
|
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
|
|
|
|
/* We have to keep ENET enabled to have MII interrupt stay working */
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
writel(2, fep->hwp + FEC_ECNTRL);
|
|
writel(rmii_mode, fep->hwp + FEC_R_CNTRL);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
fec_timeout(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
ndev->stats.tx_errors++;
|
|
|
|
fep->delay_work.timeout = true;
|
|
schedule_delayed_work(&(fep->delay_work.delay_work), 0);
|
|
}
|
|
|
|
static void fec_enet_work(struct work_struct *work)
|
|
{
|
|
struct fec_enet_private *fep =
|
|
container_of(work,
|
|
struct fec_enet_private,
|
|
delay_work.delay_work.work);
|
|
|
|
if (fep->delay_work.timeout) {
|
|
fep->delay_work.timeout = false;
|
|
fec_restart(fep->netdev, fep->full_duplex);
|
|
netif_wake_queue(fep->netdev);
|
|
}
|
|
|
|
if (fep->delay_work.trig_tx) {
|
|
fep->delay_work.trig_tx = false;
|
|
writel(0, fep->hwp + FEC_X_DES_ACTIVE);
|
|
}
|
|
}
|
|
|
|
static void
|
|
fec_enet_tx(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep;
|
|
struct bufdesc *bdp;
|
|
unsigned short status;
|
|
struct sk_buff *skb;
|
|
int index = 0;
|
|
|
|
fep = netdev_priv(ndev);
|
|
bdp = fep->dirty_tx;
|
|
|
|
/* get next bdp of dirty_tx */
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
|
|
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
|
|
|
|
/* current queue is empty */
|
|
if (bdp == fep->cur_tx)
|
|
break;
|
|
|
|
if (fep->bufdesc_ex)
|
|
index = (struct bufdesc_ex *)bdp -
|
|
(struct bufdesc_ex *)fep->tx_bd_base;
|
|
else
|
|
index = bdp - fep->tx_bd_base;
|
|
|
|
dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
|
|
FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
|
|
bdp->cbd_bufaddr = 0;
|
|
|
|
skb = fep->tx_skbuff[index];
|
|
|
|
/* Check for errors. */
|
|
if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
|
|
BD_ENET_TX_RL | BD_ENET_TX_UN |
|
|
BD_ENET_TX_CSL)) {
|
|
ndev->stats.tx_errors++;
|
|
if (status & BD_ENET_TX_HB) /* No heartbeat */
|
|
ndev->stats.tx_heartbeat_errors++;
|
|
if (status & BD_ENET_TX_LC) /* Late collision */
|
|
ndev->stats.tx_window_errors++;
|
|
if (status & BD_ENET_TX_RL) /* Retrans limit */
|
|
ndev->stats.tx_aborted_errors++;
|
|
if (status & BD_ENET_TX_UN) /* Underrun */
|
|
ndev->stats.tx_fifo_errors++;
|
|
if (status & BD_ENET_TX_CSL) /* Carrier lost */
|
|
ndev->stats.tx_carrier_errors++;
|
|
} else {
|
|
ndev->stats.tx_packets++;
|
|
ndev->stats.tx_bytes += bdp->cbd_datlen;
|
|
}
|
|
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) &&
|
|
fep->bufdesc_ex) {
|
|
struct skb_shared_hwtstamps shhwtstamps;
|
|
unsigned long flags;
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
|
|
memset(&shhwtstamps, 0, sizeof(shhwtstamps));
|
|
spin_lock_irqsave(&fep->tmreg_lock, flags);
|
|
shhwtstamps.hwtstamp = ns_to_ktime(
|
|
timecounter_cyc2time(&fep->tc, ebdp->ts));
|
|
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
|
|
skb_tstamp_tx(skb, &shhwtstamps);
|
|
}
|
|
|
|
if (status & BD_ENET_TX_READY)
|
|
netdev_err(ndev, "HEY! Enet xmit interrupt and TX_READY\n");
|
|
|
|
/* Deferred means some collisions occurred during transmit,
|
|
* but we eventually sent the packet OK.
|
|
*/
|
|
if (status & BD_ENET_TX_DEF)
|
|
ndev->stats.collisions++;
|
|
|
|
/* Free the sk buffer associated with this last transmit */
|
|
dev_kfree_skb_any(skb);
|
|
fep->tx_skbuff[index] = NULL;
|
|
|
|
fep->dirty_tx = bdp;
|
|
|
|
/* Update pointer to next buffer descriptor to be transmitted */
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
|
|
/* Since we have freed up a buffer, the ring is no longer full
|
|
*/
|
|
if (fep->dirty_tx != fep->cur_tx) {
|
|
if (netif_queue_stopped(ndev))
|
|
netif_wake_queue(ndev);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/* During a receive, the cur_rx points to the current incoming buffer.
|
|
* When we update through the ring, if the next incoming buffer has
|
|
* not been given to the system, we just set the empty indicator,
|
|
* effectively tossing the packet.
|
|
*/
|
|
static int
|
|
fec_enet_rx(struct net_device *ndev, int budget)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct bufdesc *bdp;
|
|
unsigned short status;
|
|
struct sk_buff *skb;
|
|
ushort pkt_len;
|
|
__u8 *data;
|
|
int pkt_received = 0;
|
|
struct bufdesc_ex *ebdp = NULL;
|
|
bool vlan_packet_rcvd = false;
|
|
u16 vlan_tag;
|
|
int index = 0;
|
|
|
|
#ifdef CONFIG_M532x
|
|
flush_cache_all();
|
|
#endif
|
|
|
|
/* First, grab all of the stats for the incoming packet.
|
|
* These get messed up if we get called due to a busy condition.
|
|
*/
|
|
bdp = fep->cur_rx;
|
|
|
|
while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
|
|
|
|
if (pkt_received >= budget)
|
|
break;
|
|
pkt_received++;
|
|
|
|
/* Since we have allocated space to hold a complete frame,
|
|
* the last indicator should be set.
|
|
*/
|
|
if ((status & BD_ENET_RX_LAST) == 0)
|
|
netdev_err(ndev, "rcv is not +last\n");
|
|
|
|
if (!fep->opened)
|
|
goto rx_processing_done;
|
|
|
|
/* Check for errors. */
|
|
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
|
|
BD_ENET_RX_CR | BD_ENET_RX_OV)) {
|
|
ndev->stats.rx_errors++;
|
|
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
|
|
/* Frame too long or too short. */
|
|
ndev->stats.rx_length_errors++;
|
|
}
|
|
if (status & BD_ENET_RX_NO) /* Frame alignment */
|
|
ndev->stats.rx_frame_errors++;
|
|
if (status & BD_ENET_RX_CR) /* CRC Error */
|
|
ndev->stats.rx_crc_errors++;
|
|
if (status & BD_ENET_RX_OV) /* FIFO overrun */
|
|
ndev->stats.rx_fifo_errors++;
|
|
}
|
|
|
|
/* Report late collisions as a frame error.
|
|
* On this error, the BD is closed, but we don't know what we
|
|
* have in the buffer. So, just drop this frame on the floor.
|
|
*/
|
|
if (status & BD_ENET_RX_CL) {
|
|
ndev->stats.rx_errors++;
|
|
ndev->stats.rx_frame_errors++;
|
|
goto rx_processing_done;
|
|
}
|
|
|
|
/* Process the incoming frame. */
|
|
ndev->stats.rx_packets++;
|
|
pkt_len = bdp->cbd_datlen;
|
|
ndev->stats.rx_bytes += pkt_len;
|
|
|
|
if (fep->bufdesc_ex)
|
|
index = (struct bufdesc_ex *)bdp -
|
|
(struct bufdesc_ex *)fep->rx_bd_base;
|
|
else
|
|
index = bdp - fep->rx_bd_base;
|
|
data = fep->rx_skbuff[index]->data;
|
|
dma_sync_single_for_cpu(&fep->pdev->dev, bdp->cbd_bufaddr,
|
|
FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
|
|
|
|
if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
|
|
swap_buffer(data, pkt_len);
|
|
|
|
/* Extract the enhanced buffer descriptor */
|
|
ebdp = NULL;
|
|
if (fep->bufdesc_ex)
|
|
ebdp = (struct bufdesc_ex *)bdp;
|
|
|
|
/* If this is a VLAN packet remove the VLAN Tag */
|
|
vlan_packet_rcvd = false;
|
|
if ((ndev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
|
|
fep->bufdesc_ex && (ebdp->cbd_esc & BD_ENET_RX_VLAN)) {
|
|
/* Push and remove the vlan tag */
|
|
struct vlan_hdr *vlan_header =
|
|
(struct vlan_hdr *) (data + ETH_HLEN);
|
|
vlan_tag = ntohs(vlan_header->h_vlan_TCI);
|
|
pkt_len -= VLAN_HLEN;
|
|
|
|
vlan_packet_rcvd = true;
|
|
}
|
|
|
|
/* This does 16 byte alignment, exactly what we need.
|
|
* The packet length includes FCS, but we don't want to
|
|
* include that when passing upstream as it messes up
|
|
* bridging applications.
|
|
*/
|
|
skb = netdev_alloc_skb(ndev, pkt_len - 4 + NET_IP_ALIGN);
|
|
|
|
if (unlikely(!skb)) {
|
|
ndev->stats.rx_dropped++;
|
|
} else {
|
|
int payload_offset = (2 * ETH_ALEN);
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
skb_put(skb, pkt_len - 4); /* Make room */
|
|
|
|
/* Extract the frame data without the VLAN header. */
|
|
skb_copy_to_linear_data(skb, data, (2 * ETH_ALEN));
|
|
if (vlan_packet_rcvd)
|
|
payload_offset = (2 * ETH_ALEN) + VLAN_HLEN;
|
|
skb_copy_to_linear_data_offset(skb, (2 * ETH_ALEN),
|
|
data + payload_offset,
|
|
pkt_len - 4 - (2 * ETH_ALEN));
|
|
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
|
|
/* Get receive timestamp from the skb */
|
|
if (fep->hwts_rx_en && fep->bufdesc_ex) {
|
|
struct skb_shared_hwtstamps *shhwtstamps =
|
|
skb_hwtstamps(skb);
|
|
unsigned long flags;
|
|
|
|
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
|
|
|
|
spin_lock_irqsave(&fep->tmreg_lock, flags);
|
|
shhwtstamps->hwtstamp = ns_to_ktime(
|
|
timecounter_cyc2time(&fep->tc, ebdp->ts));
|
|
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
|
|
}
|
|
|
|
if (fep->bufdesc_ex &&
|
|
(fep->csum_flags & FLAG_RX_CSUM_ENABLED)) {
|
|
if (!(ebdp->cbd_esc & FLAG_RX_CSUM_ERROR)) {
|
|
/* don't check it */
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
} else {
|
|
skb_checksum_none_assert(skb);
|
|
}
|
|
}
|
|
|
|
/* Handle received VLAN packets */
|
|
if (vlan_packet_rcvd)
|
|
__vlan_hwaccel_put_tag(skb,
|
|
htons(ETH_P_8021Q),
|
|
vlan_tag);
|
|
|
|
napi_gro_receive(&fep->napi, skb);
|
|
}
|
|
|
|
dma_sync_single_for_device(&fep->pdev->dev, bdp->cbd_bufaddr,
|
|
FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
|
|
rx_processing_done:
|
|
/* Clear the status flags for this buffer */
|
|
status &= ~BD_ENET_RX_STATS;
|
|
|
|
/* Mark the buffer empty */
|
|
status |= BD_ENET_RX_EMPTY;
|
|
bdp->cbd_sc = status;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
|
|
ebdp->cbd_esc = BD_ENET_RX_INT;
|
|
ebdp->cbd_prot = 0;
|
|
ebdp->cbd_bdu = 0;
|
|
}
|
|
|
|
/* Update BD pointer to next entry */
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
|
|
/* Doing this here will keep the FEC running while we process
|
|
* incoming frames. On a heavily loaded network, we should be
|
|
* able to keep up at the expense of system resources.
|
|
*/
|
|
writel(0, fep->hwp + FEC_R_DES_ACTIVE);
|
|
}
|
|
fep->cur_rx = bdp;
|
|
|
|
return pkt_received;
|
|
}
|
|
|
|
static irqreturn_t
|
|
fec_enet_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *ndev = dev_id;
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
uint int_events;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
do {
|
|
int_events = readl(fep->hwp + FEC_IEVENT);
|
|
writel(int_events, fep->hwp + FEC_IEVENT);
|
|
|
|
if (int_events & (FEC_ENET_RXF | FEC_ENET_TXF)) {
|
|
ret = IRQ_HANDLED;
|
|
|
|
/* Disable the RX interrupt */
|
|
if (napi_schedule_prep(&fep->napi)) {
|
|
writel(FEC_RX_DISABLED_IMASK,
|
|
fep->hwp + FEC_IMASK);
|
|
__napi_schedule(&fep->napi);
|
|
}
|
|
}
|
|
|
|
if (int_events & FEC_ENET_MII) {
|
|
ret = IRQ_HANDLED;
|
|
complete(&fep->mdio_done);
|
|
}
|
|
} while (int_events);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fec_enet_rx_napi(struct napi_struct *napi, int budget)
|
|
{
|
|
struct net_device *ndev = napi->dev;
|
|
int pkts = fec_enet_rx(ndev, budget);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
fec_enet_tx(ndev);
|
|
|
|
if (pkts < budget) {
|
|
napi_complete(napi);
|
|
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
|
|
}
|
|
return pkts;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
static void fec_get_mac(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct fec_platform_data *pdata = dev_get_platdata(&fep->pdev->dev);
|
|
unsigned char *iap, tmpaddr[ETH_ALEN];
|
|
|
|
/*
|
|
* try to get mac address in following order:
|
|
*
|
|
* 1) module parameter via kernel command line in form
|
|
* fec.macaddr=0x00,0x04,0x9f,0x01,0x30,0xe0
|
|
*/
|
|
iap = macaddr;
|
|
|
|
/*
|
|
* 2) from device tree data
|
|
*/
|
|
if (!is_valid_ether_addr(iap)) {
|
|
struct device_node *np = fep->pdev->dev.of_node;
|
|
if (np) {
|
|
const char *mac = of_get_mac_address(np);
|
|
if (mac)
|
|
iap = (unsigned char *) mac;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* 3) from flash or fuse (via platform data)
|
|
*/
|
|
if (!is_valid_ether_addr(iap)) {
|
|
#ifdef CONFIG_M5272
|
|
if (FEC_FLASHMAC)
|
|
iap = (unsigned char *)FEC_FLASHMAC;
|
|
#else
|
|
if (pdata)
|
|
iap = (unsigned char *)&pdata->mac;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* 4) FEC mac registers set by bootloader
|
|
*/
|
|
if (!is_valid_ether_addr(iap)) {
|
|
*((__be32 *) &tmpaddr[0]) =
|
|
cpu_to_be32(readl(fep->hwp + FEC_ADDR_LOW));
|
|
*((__be16 *) &tmpaddr[4]) =
|
|
cpu_to_be16(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
|
|
iap = &tmpaddr[0];
|
|
}
|
|
|
|
/*
|
|
* 5) random mac address
|
|
*/
|
|
if (!is_valid_ether_addr(iap)) {
|
|
/* Report it and use a random ethernet address instead */
|
|
netdev_err(ndev, "Invalid MAC address: %pM\n", iap);
|
|
eth_hw_addr_random(ndev);
|
|
netdev_info(ndev, "Using random MAC address: %pM\n",
|
|
ndev->dev_addr);
|
|
return;
|
|
}
|
|
|
|
memcpy(ndev->dev_addr, iap, ETH_ALEN);
|
|
|
|
/* Adjust MAC if using macaddr */
|
|
if (iap == macaddr)
|
|
ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->dev_id;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Phy section
|
|
*/
|
|
static void fec_enet_adjust_link(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phy_dev = fep->phy_dev;
|
|
int status_change = 0;
|
|
|
|
/* Prevent a state halted on mii error */
|
|
if (fep->mii_timeout && phy_dev->state == PHY_HALTED) {
|
|
phy_dev->state = PHY_RESUMING;
|
|
return;
|
|
}
|
|
|
|
if (phy_dev->link) {
|
|
if (!fep->link) {
|
|
fep->link = phy_dev->link;
|
|
status_change = 1;
|
|
}
|
|
|
|
if (fep->full_duplex != phy_dev->duplex)
|
|
status_change = 1;
|
|
|
|
if (phy_dev->speed != fep->speed) {
|
|
fep->speed = phy_dev->speed;
|
|
status_change = 1;
|
|
}
|
|
|
|
/* if any of the above changed restart the FEC */
|
|
if (status_change)
|
|
fec_restart(ndev, phy_dev->duplex);
|
|
} else {
|
|
if (fep->link) {
|
|
fec_stop(ndev);
|
|
fep->link = phy_dev->link;
|
|
status_change = 1;
|
|
}
|
|
}
|
|
|
|
if (status_change)
|
|
phy_print_status(phy_dev);
|
|
}
|
|
|
|
static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
|
|
{
|
|
struct fec_enet_private *fep = bus->priv;
|
|
unsigned long time_left;
|
|
|
|
fep->mii_timeout = 0;
|
|
init_completion(&fep->mdio_done);
|
|
|
|
/* start a read op */
|
|
writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
|
|
FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
|
|
FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
|
|
|
|
/* wait for end of transfer */
|
|
time_left = wait_for_completion_timeout(&fep->mdio_done,
|
|
usecs_to_jiffies(FEC_MII_TIMEOUT));
|
|
if (time_left == 0) {
|
|
fep->mii_timeout = 1;
|
|
netdev_err(fep->netdev, "MDIO read timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* return value */
|
|
return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
|
|
}
|
|
|
|
static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
|
|
u16 value)
|
|
{
|
|
struct fec_enet_private *fep = bus->priv;
|
|
unsigned long time_left;
|
|
|
|
fep->mii_timeout = 0;
|
|
init_completion(&fep->mdio_done);
|
|
|
|
/* start a write op */
|
|
writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
|
|
FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
|
|
FEC_MMFR_TA | FEC_MMFR_DATA(value),
|
|
fep->hwp + FEC_MII_DATA);
|
|
|
|
/* wait for end of transfer */
|
|
time_left = wait_for_completion_timeout(&fep->mdio_done,
|
|
usecs_to_jiffies(FEC_MII_TIMEOUT));
|
|
if (time_left == 0) {
|
|
fep->mii_timeout = 1;
|
|
netdev_err(fep->netdev, "MDIO write timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fec_enet_mdio_reset(struct mii_bus *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int fec_enet_mii_probe(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct phy_device *phy_dev = NULL;
|
|
char mdio_bus_id[MII_BUS_ID_SIZE];
|
|
char phy_name[MII_BUS_ID_SIZE + 3];
|
|
int phy_id;
|
|
int dev_id = fep->dev_id;
|
|
|
|
fep->phy_dev = NULL;
|
|
|
|
/* check for attached phy */
|
|
for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
|
|
if ((fep->mii_bus->phy_mask & (1 << phy_id)))
|
|
continue;
|
|
if (fep->mii_bus->phy_map[phy_id] == NULL)
|
|
continue;
|
|
if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
|
|
continue;
|
|
if (dev_id--)
|
|
continue;
|
|
strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
|
|
break;
|
|
}
|
|
|
|
if (phy_id >= PHY_MAX_ADDR) {
|
|
netdev_info(ndev, "no PHY, assuming direct connection to switch\n");
|
|
strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
|
|
phy_id = 0;
|
|
}
|
|
|
|
snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id);
|
|
phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link,
|
|
fep->phy_interface);
|
|
if (IS_ERR(phy_dev)) {
|
|
netdev_err(ndev, "could not attach to PHY\n");
|
|
return PTR_ERR(phy_dev);
|
|
}
|
|
|
|
/* mask with MAC supported features */
|
|
if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) {
|
|
phy_dev->supported &= PHY_GBIT_FEATURES;
|
|
#if !defined(CONFIG_M5272)
|
|
phy_dev->supported |= SUPPORTED_Pause;
|
|
#endif
|
|
}
|
|
else
|
|
phy_dev->supported &= PHY_BASIC_FEATURES;
|
|
|
|
phy_dev->advertising = phy_dev->supported;
|
|
|
|
fep->phy_dev = phy_dev;
|
|
fep->link = 0;
|
|
fep->full_duplex = 0;
|
|
|
|
netdev_info(ndev, "Freescale FEC PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
|
|
fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
|
|
fep->phy_dev->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fec_enet_mii_init(struct platform_device *pdev)
|
|
{
|
|
static struct mii_bus *fec0_mii_bus;
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
int err = -ENXIO, i;
|
|
|
|
/*
|
|
* The dual fec interfaces are not equivalent with enet-mac.
|
|
* Here are the differences:
|
|
*
|
|
* - fec0 supports MII & RMII modes while fec1 only supports RMII
|
|
* - fec0 acts as the 1588 time master while fec1 is slave
|
|
* - external phys can only be configured by fec0
|
|
*
|
|
* That is to say fec1 can not work independently. It only works
|
|
* when fec0 is working. The reason behind this design is that the
|
|
* second interface is added primarily for Switch mode.
|
|
*
|
|
* Because of the last point above, both phys are attached on fec0
|
|
* mdio interface in board design, and need to be configured by
|
|
* fec0 mii_bus.
|
|
*/
|
|
if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) {
|
|
/* fec1 uses fec0 mii_bus */
|
|
if (mii_cnt && fec0_mii_bus) {
|
|
fep->mii_bus = fec0_mii_bus;
|
|
mii_cnt++;
|
|
return 0;
|
|
}
|
|
return -ENOENT;
|
|
}
|
|
|
|
fep->mii_timeout = 0;
|
|
|
|
/*
|
|
* Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
|
|
*
|
|
* The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while
|
|
* for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'. The i.MX28
|
|
* Reference Manual has an error on this, and gets fixed on i.MX6Q
|
|
* document.
|
|
*/
|
|
fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ahb), 5000000);
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
|
|
fep->phy_speed--;
|
|
fep->phy_speed <<= 1;
|
|
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
|
|
|
|
fep->mii_bus = mdiobus_alloc();
|
|
if (fep->mii_bus == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
fep->mii_bus->name = "fec_enet_mii_bus";
|
|
fep->mii_bus->read = fec_enet_mdio_read;
|
|
fep->mii_bus->write = fec_enet_mdio_write;
|
|
fep->mii_bus->reset = fec_enet_mdio_reset;
|
|
snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
|
|
pdev->name, fep->dev_id + 1);
|
|
fep->mii_bus->priv = fep;
|
|
fep->mii_bus->parent = &pdev->dev;
|
|
|
|
fep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
|
|
if (!fep->mii_bus->irq) {
|
|
err = -ENOMEM;
|
|
goto err_out_free_mdiobus;
|
|
}
|
|
|
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
|
fep->mii_bus->irq[i] = PHY_POLL;
|
|
|
|
if (mdiobus_register(fep->mii_bus))
|
|
goto err_out_free_mdio_irq;
|
|
|
|
mii_cnt++;
|
|
|
|
/* save fec0 mii_bus */
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
|
|
fec0_mii_bus = fep->mii_bus;
|
|
|
|
return 0;
|
|
|
|
err_out_free_mdio_irq:
|
|
kfree(fep->mii_bus->irq);
|
|
err_out_free_mdiobus:
|
|
mdiobus_free(fep->mii_bus);
|
|
err_out:
|
|
return err;
|
|
}
|
|
|
|
static void fec_enet_mii_remove(struct fec_enet_private *fep)
|
|
{
|
|
if (--mii_cnt == 0) {
|
|
mdiobus_unregister(fep->mii_bus);
|
|
kfree(fep->mii_bus->irq);
|
|
mdiobus_free(fep->mii_bus);
|
|
}
|
|
}
|
|
|
|
static int fec_enet_get_settings(struct net_device *ndev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phydev = fep->phy_dev;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
return phy_ethtool_gset(phydev, cmd);
|
|
}
|
|
|
|
static int fec_enet_set_settings(struct net_device *ndev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phydev = fep->phy_dev;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
return phy_ethtool_sset(phydev, cmd);
|
|
}
|
|
|
|
static void fec_enet_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
strlcpy(info->driver, fep->pdev->dev.driver->name,
|
|
sizeof(info->driver));
|
|
strlcpy(info->version, "Revision: 1.0", sizeof(info->version));
|
|
strlcpy(info->bus_info, dev_name(&ndev->dev), sizeof(info->bus_info));
|
|
}
|
|
|
|
static int fec_enet_get_ts_info(struct net_device *ndev,
|
|
struct ethtool_ts_info *info)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
if (fep->bufdesc_ex) {
|
|
|
|
info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
|
|
SOF_TIMESTAMPING_RX_SOFTWARE |
|
|
SOF_TIMESTAMPING_SOFTWARE |
|
|
SOF_TIMESTAMPING_TX_HARDWARE |
|
|
SOF_TIMESTAMPING_RX_HARDWARE |
|
|
SOF_TIMESTAMPING_RAW_HARDWARE;
|
|
if (fep->ptp_clock)
|
|
info->phc_index = ptp_clock_index(fep->ptp_clock);
|
|
else
|
|
info->phc_index = -1;
|
|
|
|
info->tx_types = (1 << HWTSTAMP_TX_OFF) |
|
|
(1 << HWTSTAMP_TX_ON);
|
|
|
|
info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
|
|
(1 << HWTSTAMP_FILTER_ALL);
|
|
return 0;
|
|
} else {
|
|
return ethtool_op_get_ts_info(ndev, info);
|
|
}
|
|
}
|
|
|
|
#if !defined(CONFIG_M5272)
|
|
|
|
static void fec_enet_get_pauseparam(struct net_device *ndev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
pause->autoneg = (fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) != 0;
|
|
pause->tx_pause = (fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) != 0;
|
|
pause->rx_pause = pause->tx_pause;
|
|
}
|
|
|
|
static int fec_enet_set_pauseparam(struct net_device *ndev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
if (pause->tx_pause != pause->rx_pause) {
|
|
netdev_info(ndev,
|
|
"hardware only support enable/disable both tx and rx");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fep->pause_flag = 0;
|
|
|
|
/* tx pause must be same as rx pause */
|
|
fep->pause_flag |= pause->rx_pause ? FEC_PAUSE_FLAG_ENABLE : 0;
|
|
fep->pause_flag |= pause->autoneg ? FEC_PAUSE_FLAG_AUTONEG : 0;
|
|
|
|
if (pause->rx_pause || pause->autoneg) {
|
|
fep->phy_dev->supported |= ADVERTISED_Pause;
|
|
fep->phy_dev->advertising |= ADVERTISED_Pause;
|
|
} else {
|
|
fep->phy_dev->supported &= ~ADVERTISED_Pause;
|
|
fep->phy_dev->advertising &= ~ADVERTISED_Pause;
|
|
}
|
|
|
|
if (pause->autoneg) {
|
|
if (netif_running(ndev))
|
|
fec_stop(ndev);
|
|
phy_start_aneg(fep->phy_dev);
|
|
}
|
|
if (netif_running(ndev))
|
|
fec_restart(ndev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct fec_stat {
|
|
char name[ETH_GSTRING_LEN];
|
|
u16 offset;
|
|
} fec_stats[] = {
|
|
/* RMON TX */
|
|
{ "tx_dropped", RMON_T_DROP },
|
|
{ "tx_packets", RMON_T_PACKETS },
|
|
{ "tx_broadcast", RMON_T_BC_PKT },
|
|
{ "tx_multicast", RMON_T_MC_PKT },
|
|
{ "tx_crc_errors", RMON_T_CRC_ALIGN },
|
|
{ "tx_undersize", RMON_T_UNDERSIZE },
|
|
{ "tx_oversize", RMON_T_OVERSIZE },
|
|
{ "tx_fragment", RMON_T_FRAG },
|
|
{ "tx_jabber", RMON_T_JAB },
|
|
{ "tx_collision", RMON_T_COL },
|
|
{ "tx_64byte", RMON_T_P64 },
|
|
{ "tx_65to127byte", RMON_T_P65TO127 },
|
|
{ "tx_128to255byte", RMON_T_P128TO255 },
|
|
{ "tx_256to511byte", RMON_T_P256TO511 },
|
|
{ "tx_512to1023byte", RMON_T_P512TO1023 },
|
|
{ "tx_1024to2047byte", RMON_T_P1024TO2047 },
|
|
{ "tx_GTE2048byte", RMON_T_P_GTE2048 },
|
|
{ "tx_octets", RMON_T_OCTETS },
|
|
|
|
/* IEEE TX */
|
|
{ "IEEE_tx_drop", IEEE_T_DROP },
|
|
{ "IEEE_tx_frame_ok", IEEE_T_FRAME_OK },
|
|
{ "IEEE_tx_1col", IEEE_T_1COL },
|
|
{ "IEEE_tx_mcol", IEEE_T_MCOL },
|
|
{ "IEEE_tx_def", IEEE_T_DEF },
|
|
{ "IEEE_tx_lcol", IEEE_T_LCOL },
|
|
{ "IEEE_tx_excol", IEEE_T_EXCOL },
|
|
{ "IEEE_tx_macerr", IEEE_T_MACERR },
|
|
{ "IEEE_tx_cserr", IEEE_T_CSERR },
|
|
{ "IEEE_tx_sqe", IEEE_T_SQE },
|
|
{ "IEEE_tx_fdxfc", IEEE_T_FDXFC },
|
|
{ "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK },
|
|
|
|
/* RMON RX */
|
|
{ "rx_packets", RMON_R_PACKETS },
|
|
{ "rx_broadcast", RMON_R_BC_PKT },
|
|
{ "rx_multicast", RMON_R_MC_PKT },
|
|
{ "rx_crc_errors", RMON_R_CRC_ALIGN },
|
|
{ "rx_undersize", RMON_R_UNDERSIZE },
|
|
{ "rx_oversize", RMON_R_OVERSIZE },
|
|
{ "rx_fragment", RMON_R_FRAG },
|
|
{ "rx_jabber", RMON_R_JAB },
|
|
{ "rx_64byte", RMON_R_P64 },
|
|
{ "rx_65to127byte", RMON_R_P65TO127 },
|
|
{ "rx_128to255byte", RMON_R_P128TO255 },
|
|
{ "rx_256to511byte", RMON_R_P256TO511 },
|
|
{ "rx_512to1023byte", RMON_R_P512TO1023 },
|
|
{ "rx_1024to2047byte", RMON_R_P1024TO2047 },
|
|
{ "rx_GTE2048byte", RMON_R_P_GTE2048 },
|
|
{ "rx_octets", RMON_R_OCTETS },
|
|
|
|
/* IEEE RX */
|
|
{ "IEEE_rx_drop", IEEE_R_DROP },
|
|
{ "IEEE_rx_frame_ok", IEEE_R_FRAME_OK },
|
|
{ "IEEE_rx_crc", IEEE_R_CRC },
|
|
{ "IEEE_rx_align", IEEE_R_ALIGN },
|
|
{ "IEEE_rx_macerr", IEEE_R_MACERR },
|
|
{ "IEEE_rx_fdxfc", IEEE_R_FDXFC },
|
|
{ "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK },
|
|
};
|
|
|
|
static void fec_enet_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(dev);
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
|
|
data[i] = readl(fep->hwp + fec_stats[i].offset);
|
|
}
|
|
|
|
static void fec_enet_get_strings(struct net_device *netdev,
|
|
u32 stringset, u8 *data)
|
|
{
|
|
int i;
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
|
|
memcpy(data + i * ETH_GSTRING_LEN,
|
|
fec_stats[i].name, ETH_GSTRING_LEN);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int fec_enet_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return ARRAY_SIZE(fec_stats);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
#endif /* !defined(CONFIG_M5272) */
|
|
|
|
static int fec_enet_nway_reset(struct net_device *dev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(dev);
|
|
struct phy_device *phydev = fep->phy_dev;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
return genphy_restart_aneg(phydev);
|
|
}
|
|
|
|
static const struct ethtool_ops fec_enet_ethtool_ops = {
|
|
#if !defined(CONFIG_M5272)
|
|
.get_pauseparam = fec_enet_get_pauseparam,
|
|
.set_pauseparam = fec_enet_set_pauseparam,
|
|
#endif
|
|
.get_settings = fec_enet_get_settings,
|
|
.set_settings = fec_enet_set_settings,
|
|
.get_drvinfo = fec_enet_get_drvinfo,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_ts_info = fec_enet_get_ts_info,
|
|
.nway_reset = fec_enet_nway_reset,
|
|
#ifndef CONFIG_M5272
|
|
.get_ethtool_stats = fec_enet_get_ethtool_stats,
|
|
.get_strings = fec_enet_get_strings,
|
|
.get_sset_count = fec_enet_get_sset_count,
|
|
#endif
|
|
};
|
|
|
|
static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phydev = fep->phy_dev;
|
|
|
|
if (!netif_running(ndev))
|
|
return -EINVAL;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
if (cmd == SIOCSHWTSTAMP && fep->bufdesc_ex)
|
|
return fec_ptp_ioctl(ndev, rq, cmd);
|
|
|
|
return phy_mii_ioctl(phydev, rq, cmd);
|
|
}
|
|
|
|
static void fec_enet_free_buffers(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
unsigned int i;
|
|
struct sk_buff *skb;
|
|
struct bufdesc *bdp;
|
|
|
|
bdp = fep->rx_bd_base;
|
|
for (i = 0; i < fep->rx_ring_size; i++) {
|
|
skb = fep->rx_skbuff[i];
|
|
|
|
if (bdp->cbd_bufaddr)
|
|
dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
|
|
FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
|
|
if (skb)
|
|
dev_kfree_skb(skb);
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
}
|
|
|
|
bdp = fep->tx_bd_base;
|
|
for (i = 0; i < fep->tx_ring_size; i++)
|
|
kfree(fep->tx_bounce[i]);
|
|
}
|
|
|
|
static int fec_enet_alloc_buffers(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
unsigned int i;
|
|
struct sk_buff *skb;
|
|
struct bufdesc *bdp;
|
|
|
|
bdp = fep->rx_bd_base;
|
|
for (i = 0; i < fep->rx_ring_size; i++) {
|
|
skb = netdev_alloc_skb(ndev, FEC_ENET_RX_FRSIZE);
|
|
if (!skb) {
|
|
fec_enet_free_buffers(ndev);
|
|
return -ENOMEM;
|
|
}
|
|
fep->rx_skbuff[i] = skb;
|
|
|
|
bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, skb->data,
|
|
FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) {
|
|
fec_enet_free_buffers(ndev);
|
|
if (net_ratelimit())
|
|
netdev_err(ndev, "Rx DMA memory map failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
bdp->cbd_sc = BD_ENET_RX_EMPTY;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
ebdp->cbd_esc = BD_ENET_RX_INT;
|
|
}
|
|
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
}
|
|
|
|
/* Set the last buffer to wrap. */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
|
|
bdp = fep->tx_bd_base;
|
|
for (i = 0; i < fep->tx_ring_size; i++) {
|
|
fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL);
|
|
|
|
bdp->cbd_sc = 0;
|
|
bdp->cbd_bufaddr = 0;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
ebdp->cbd_esc = BD_ENET_TX_INT;
|
|
}
|
|
|
|
bdp = fec_enet_get_nextdesc(bdp, fep);
|
|
}
|
|
|
|
/* Set the last buffer to wrap. */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fec_enet_open(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
int ret;
|
|
|
|
napi_enable(&fep->napi);
|
|
|
|
/* I should reset the ring buffers here, but I don't yet know
|
|
* a simple way to do that.
|
|
*/
|
|
|
|
ret = fec_enet_alloc_buffers(ndev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Probe and connect to PHY when open the interface */
|
|
ret = fec_enet_mii_probe(ndev);
|
|
if (ret) {
|
|
fec_enet_free_buffers(ndev);
|
|
return ret;
|
|
}
|
|
phy_start(fep->phy_dev);
|
|
netif_start_queue(ndev);
|
|
fep->opened = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fec_enet_close(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
/* Don't know what to do yet. */
|
|
napi_disable(&fep->napi);
|
|
fep->opened = 0;
|
|
netif_stop_queue(ndev);
|
|
fec_stop(ndev);
|
|
|
|
if (fep->phy_dev) {
|
|
phy_stop(fep->phy_dev);
|
|
phy_disconnect(fep->phy_dev);
|
|
}
|
|
|
|
fec_enet_free_buffers(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
* Skeleton taken from sunlance driver.
|
|
* The CPM Ethernet implementation allows Multicast as well as individual
|
|
* MAC address filtering. Some of the drivers check to make sure it is
|
|
* a group multicast address, and discard those that are not. I guess I
|
|
* will do the same for now, but just remove the test if you want
|
|
* individual filtering as well (do the upper net layers want or support
|
|
* this kind of feature?).
|
|
*/
|
|
|
|
#define HASH_BITS 6 /* #bits in hash */
|
|
#define CRC32_POLY 0xEDB88320
|
|
|
|
static void set_multicast_list(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct netdev_hw_addr *ha;
|
|
unsigned int i, bit, data, crc, tmp;
|
|
unsigned char hash;
|
|
|
|
if (ndev->flags & IFF_PROMISC) {
|
|
tmp = readl(fep->hwp + FEC_R_CNTRL);
|
|
tmp |= 0x8;
|
|
writel(tmp, fep->hwp + FEC_R_CNTRL);
|
|
return;
|
|
}
|
|
|
|
tmp = readl(fep->hwp + FEC_R_CNTRL);
|
|
tmp &= ~0x8;
|
|
writel(tmp, fep->hwp + FEC_R_CNTRL);
|
|
|
|
if (ndev->flags & IFF_ALLMULTI) {
|
|
/* Catch all multicast addresses, so set the
|
|
* filter to all 1's
|
|
*/
|
|
writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Clear filter and add the addresses in hash register
|
|
*/
|
|
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
|
|
netdev_for_each_mc_addr(ha, ndev) {
|
|
/* calculate crc32 value of mac address */
|
|
crc = 0xffffffff;
|
|
|
|
for (i = 0; i < ndev->addr_len; i++) {
|
|
data = ha->addr[i];
|
|
for (bit = 0; bit < 8; bit++, data >>= 1) {
|
|
crc = (crc >> 1) ^
|
|
(((crc ^ data) & 1) ? CRC32_POLY : 0);
|
|
}
|
|
}
|
|
|
|
/* only upper 6 bits (HASH_BITS) are used
|
|
* which point to specific bit in he hash registers
|
|
*/
|
|
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
|
|
|
|
if (hash > 31) {
|
|
tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
tmp |= 1 << (hash - 32);
|
|
writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
} else {
|
|
tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
tmp |= 1 << hash;
|
|
writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Set a MAC change in hardware. */
|
|
static int
|
|
fec_set_mac_address(struct net_device *ndev, void *p)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
|
|
|
|
writel(ndev->dev_addr[3] | (ndev->dev_addr[2] << 8) |
|
|
(ndev->dev_addr[1] << 16) | (ndev->dev_addr[0] << 24),
|
|
fep->hwp + FEC_ADDR_LOW);
|
|
writel((ndev->dev_addr[5] << 16) | (ndev->dev_addr[4] << 24),
|
|
fep->hwp + FEC_ADDR_HIGH);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/**
|
|
* fec_poll_controller - FEC Poll controller function
|
|
* @dev: The FEC network adapter
|
|
*
|
|
* Polled functionality used by netconsole and others in non interrupt mode
|
|
*
|
|
*/
|
|
static void fec_poll_controller(struct net_device *dev)
|
|
{
|
|
int i;
|
|
struct fec_enet_private *fep = netdev_priv(dev);
|
|
|
|
for (i = 0; i < FEC_IRQ_NUM; i++) {
|
|
if (fep->irq[i] > 0) {
|
|
disable_irq(fep->irq[i]);
|
|
fec_enet_interrupt(fep->irq[i], dev);
|
|
enable_irq(fep->irq[i]);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int fec_set_features(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(netdev);
|
|
netdev_features_t changed = features ^ netdev->features;
|
|
|
|
netdev->features = features;
|
|
|
|
/* Receive checksum has been changed */
|
|
if (changed & NETIF_F_RXCSUM) {
|
|
if (features & NETIF_F_RXCSUM)
|
|
fep->csum_flags |= FLAG_RX_CSUM_ENABLED;
|
|
else
|
|
fep->csum_flags &= ~FLAG_RX_CSUM_ENABLED;
|
|
|
|
if (netif_running(netdev)) {
|
|
fec_stop(netdev);
|
|
fec_restart(netdev, fep->phy_dev->duplex);
|
|
netif_wake_queue(netdev);
|
|
} else {
|
|
fec_restart(netdev, fep->phy_dev->duplex);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops fec_netdev_ops = {
|
|
.ndo_open = fec_enet_open,
|
|
.ndo_stop = fec_enet_close,
|
|
.ndo_start_xmit = fec_enet_start_xmit,
|
|
.ndo_set_rx_mode = set_multicast_list,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_tx_timeout = fec_timeout,
|
|
.ndo_set_mac_address = fec_set_mac_address,
|
|
.ndo_do_ioctl = fec_enet_ioctl,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = fec_poll_controller,
|
|
#endif
|
|
.ndo_set_features = fec_set_features,
|
|
};
|
|
|
|
/*
|
|
* XXX: We need to clean up on failure exits here.
|
|
*
|
|
*/
|
|
static int fec_enet_init(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct bufdesc *cbd_base;
|
|
|
|
/* Allocate memory for buffer descriptors. */
|
|
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
|
|
GFP_KERNEL);
|
|
if (!cbd_base)
|
|
return -ENOMEM;
|
|
|
|
memset(cbd_base, 0, PAGE_SIZE);
|
|
|
|
fep->netdev = ndev;
|
|
|
|
/* Get the Ethernet address */
|
|
fec_get_mac(ndev);
|
|
|
|
/* init the tx & rx ring size */
|
|
fep->tx_ring_size = TX_RING_SIZE;
|
|
fep->rx_ring_size = RX_RING_SIZE;
|
|
|
|
/* Set receive and transmit descriptor base. */
|
|
fep->rx_bd_base = cbd_base;
|
|
if (fep->bufdesc_ex)
|
|
fep->tx_bd_base = (struct bufdesc *)
|
|
(((struct bufdesc_ex *)cbd_base) + fep->rx_ring_size);
|
|
else
|
|
fep->tx_bd_base = cbd_base + fep->rx_ring_size;
|
|
|
|
/* The FEC Ethernet specific entries in the device structure */
|
|
ndev->watchdog_timeo = TX_TIMEOUT;
|
|
ndev->netdev_ops = &fec_netdev_ops;
|
|
ndev->ethtool_ops = &fec_enet_ethtool_ops;
|
|
|
|
writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK);
|
|
netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, NAPI_POLL_WEIGHT);
|
|
|
|
if (id_entry->driver_data & FEC_QUIRK_HAS_VLAN) {
|
|
/* enable hw VLAN support */
|
|
ndev->features |= NETIF_F_HW_VLAN_CTAG_RX;
|
|
ndev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
|
|
}
|
|
|
|
if (id_entry->driver_data & FEC_QUIRK_HAS_CSUM) {
|
|
/* enable hw accelerator */
|
|
ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
|
|
| NETIF_F_RXCSUM);
|
|
ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
|
|
| NETIF_F_RXCSUM);
|
|
fep->csum_flags |= FLAG_RX_CSUM_ENABLED;
|
|
}
|
|
|
|
fec_restart(ndev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static void fec_reset_phy(struct platform_device *pdev)
|
|
{
|
|
int err, phy_reset;
|
|
int msec = 1;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
if (!np)
|
|
return;
|
|
|
|
of_property_read_u32(np, "phy-reset-duration", &msec);
|
|
/* A sane reset duration should not be longer than 1s */
|
|
if (msec > 1000)
|
|
msec = 1;
|
|
|
|
phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
|
|
if (!gpio_is_valid(phy_reset))
|
|
return;
|
|
|
|
err = devm_gpio_request_one(&pdev->dev, phy_reset,
|
|
GPIOF_OUT_INIT_LOW, "phy-reset");
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
|
|
return;
|
|
}
|
|
msleep(msec);
|
|
gpio_set_value(phy_reset, 1);
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static void fec_reset_phy(struct platform_device *pdev)
|
|
{
|
|
/*
|
|
* In case of platform probe, the reset has been done
|
|
* by machine code.
|
|
*/
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int
|
|
fec_probe(struct platform_device *pdev)
|
|
{
|
|
struct fec_enet_private *fep;
|
|
struct fec_platform_data *pdata;
|
|
struct net_device *ndev;
|
|
int i, irq, ret = 0;
|
|
struct resource *r;
|
|
const struct of_device_id *of_id;
|
|
static int dev_id;
|
|
|
|
of_id = of_match_device(fec_dt_ids, &pdev->dev);
|
|
if (of_id)
|
|
pdev->id_entry = of_id->data;
|
|
|
|
/* Init network device */
|
|
ndev = alloc_etherdev(sizeof(struct fec_enet_private));
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
|
|
/* setup board info structure */
|
|
fep = netdev_priv(ndev);
|
|
|
|
#if !defined(CONFIG_M5272)
|
|
/* default enable pause frame auto negotiation */
|
|
if (pdev->id_entry &&
|
|
(pdev->id_entry->driver_data & FEC_QUIRK_HAS_GBIT))
|
|
fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG;
|
|
#endif
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
fep->hwp = devm_ioremap_resource(&pdev->dev, r);
|
|
if (IS_ERR(fep->hwp)) {
|
|
ret = PTR_ERR(fep->hwp);
|
|
goto failed_ioremap;
|
|
}
|
|
|
|
fep->pdev = pdev;
|
|
fep->dev_id = dev_id++;
|
|
|
|
fep->bufdesc_ex = 0;
|
|
|
|
platform_set_drvdata(pdev, ndev);
|
|
|
|
ret = of_get_phy_mode(pdev->dev.of_node);
|
|
if (ret < 0) {
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
if (pdata)
|
|
fep->phy_interface = pdata->phy;
|
|
else
|
|
fep->phy_interface = PHY_INTERFACE_MODE_MII;
|
|
} else {
|
|
fep->phy_interface = ret;
|
|
}
|
|
|
|
fep->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(fep->clk_ipg)) {
|
|
ret = PTR_ERR(fep->clk_ipg);
|
|
goto failed_clk;
|
|
}
|
|
|
|
fep->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
|
|
if (IS_ERR(fep->clk_ahb)) {
|
|
ret = PTR_ERR(fep->clk_ahb);
|
|
goto failed_clk;
|
|
}
|
|
|
|
/* enet_out is optional, depends on board */
|
|
fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out");
|
|
if (IS_ERR(fep->clk_enet_out))
|
|
fep->clk_enet_out = NULL;
|
|
|
|
fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
|
|
fep->bufdesc_ex =
|
|
pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
|
|
if (IS_ERR(fep->clk_ptp)) {
|
|
fep->clk_ptp = NULL;
|
|
fep->bufdesc_ex = 0;
|
|
}
|
|
|
|
ret = clk_prepare_enable(fep->clk_ahb);
|
|
if (ret)
|
|
goto failed_clk;
|
|
|
|
ret = clk_prepare_enable(fep->clk_ipg);
|
|
if (ret)
|
|
goto failed_clk_ipg;
|
|
|
|
if (fep->clk_enet_out) {
|
|
ret = clk_prepare_enable(fep->clk_enet_out);
|
|
if (ret)
|
|
goto failed_clk_enet_out;
|
|
}
|
|
|
|
if (fep->clk_ptp) {
|
|
ret = clk_prepare_enable(fep->clk_ptp);
|
|
if (ret)
|
|
goto failed_clk_ptp;
|
|
}
|
|
|
|
fep->reg_phy = devm_regulator_get(&pdev->dev, "phy");
|
|
if (!IS_ERR(fep->reg_phy)) {
|
|
ret = regulator_enable(fep->reg_phy);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to enable phy regulator: %d\n", ret);
|
|
goto failed_regulator;
|
|
}
|
|
} else {
|
|
fep->reg_phy = NULL;
|
|
}
|
|
|
|
fec_reset_phy(pdev);
|
|
|
|
if (fep->bufdesc_ex)
|
|
fec_ptp_init(pdev);
|
|
|
|
ret = fec_enet_init(ndev);
|
|
if (ret)
|
|
goto failed_init;
|
|
|
|
for (i = 0; i < FEC_IRQ_NUM; i++) {
|
|
irq = platform_get_irq(pdev, i);
|
|
if (irq < 0) {
|
|
if (i)
|
|
break;
|
|
ret = irq;
|
|
goto failed_irq;
|
|
}
|
|
ret = devm_request_irq(&pdev->dev, irq, fec_enet_interrupt,
|
|
0, pdev->name, ndev);
|
|
if (ret)
|
|
goto failed_irq;
|
|
}
|
|
|
|
ret = fec_enet_mii_init(pdev);
|
|
if (ret)
|
|
goto failed_mii_init;
|
|
|
|
/* Carrier starts down, phylib will bring it up */
|
|
netif_carrier_off(ndev);
|
|
|
|
ret = register_netdev(ndev);
|
|
if (ret)
|
|
goto failed_register;
|
|
|
|
if (fep->bufdesc_ex && fep->ptp_clock)
|
|
netdev_info(ndev, "registered PHC device %d\n", fep->dev_id);
|
|
|
|
INIT_DELAYED_WORK(&(fep->delay_work.delay_work), fec_enet_work);
|
|
return 0;
|
|
|
|
failed_register:
|
|
fec_enet_mii_remove(fep);
|
|
failed_mii_init:
|
|
failed_irq:
|
|
failed_init:
|
|
if (fep->reg_phy)
|
|
regulator_disable(fep->reg_phy);
|
|
failed_regulator:
|
|
if (fep->clk_ptp)
|
|
clk_disable_unprepare(fep->clk_ptp);
|
|
failed_clk_ptp:
|
|
if (fep->clk_enet_out)
|
|
clk_disable_unprepare(fep->clk_enet_out);
|
|
failed_clk_enet_out:
|
|
clk_disable_unprepare(fep->clk_ipg);
|
|
failed_clk_ipg:
|
|
clk_disable_unprepare(fep->clk_ahb);
|
|
failed_clk:
|
|
failed_ioremap:
|
|
free_netdev(ndev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
fec_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
cancel_delayed_work_sync(&(fep->delay_work.delay_work));
|
|
unregister_netdev(ndev);
|
|
fec_enet_mii_remove(fep);
|
|
del_timer_sync(&fep->time_keep);
|
|
if (fep->reg_phy)
|
|
regulator_disable(fep->reg_phy);
|
|
if (fep->clk_ptp)
|
|
clk_disable_unprepare(fep->clk_ptp);
|
|
if (fep->ptp_clock)
|
|
ptp_clock_unregister(fep->ptp_clock);
|
|
if (fep->clk_enet_out)
|
|
clk_disable_unprepare(fep->clk_enet_out);
|
|
clk_disable_unprepare(fep->clk_ipg);
|
|
clk_disable_unprepare(fep->clk_ahb);
|
|
free_netdev(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int
|
|
fec_suspend(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
fec_stop(ndev);
|
|
netif_device_detach(ndev);
|
|
}
|
|
if (fep->clk_ptp)
|
|
clk_disable_unprepare(fep->clk_ptp);
|
|
if (fep->clk_enet_out)
|
|
clk_disable_unprepare(fep->clk_enet_out);
|
|
clk_disable_unprepare(fep->clk_ipg);
|
|
clk_disable_unprepare(fep->clk_ahb);
|
|
|
|
if (fep->reg_phy)
|
|
regulator_disable(fep->reg_phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fec_resume(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
int ret;
|
|
|
|
if (fep->reg_phy) {
|
|
ret = regulator_enable(fep->reg_phy);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(fep->clk_ahb);
|
|
if (ret)
|
|
goto failed_clk_ahb;
|
|
|
|
ret = clk_prepare_enable(fep->clk_ipg);
|
|
if (ret)
|
|
goto failed_clk_ipg;
|
|
|
|
if (fep->clk_enet_out) {
|
|
ret = clk_prepare_enable(fep->clk_enet_out);
|
|
if (ret)
|
|
goto failed_clk_enet_out;
|
|
}
|
|
|
|
if (fep->clk_ptp) {
|
|
ret = clk_prepare_enable(fep->clk_ptp);
|
|
if (ret)
|
|
goto failed_clk_ptp;
|
|
}
|
|
|
|
if (netif_running(ndev)) {
|
|
fec_restart(ndev, fep->full_duplex);
|
|
netif_device_attach(ndev);
|
|
}
|
|
|
|
return 0;
|
|
|
|
failed_clk_ptp:
|
|
if (fep->clk_enet_out)
|
|
clk_disable_unprepare(fep->clk_enet_out);
|
|
failed_clk_enet_out:
|
|
clk_disable_unprepare(fep->clk_ipg);
|
|
failed_clk_ipg:
|
|
clk_disable_unprepare(fep->clk_ahb);
|
|
failed_clk_ahb:
|
|
if (fep->reg_phy)
|
|
regulator_disable(fep->reg_phy);
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(fec_pm_ops, fec_suspend, fec_resume);
|
|
|
|
static struct platform_driver fec_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &fec_pm_ops,
|
|
.of_match_table = fec_dt_ids,
|
|
},
|
|
.id_table = fec_devtype,
|
|
.probe = fec_probe,
|
|
.remove = fec_drv_remove,
|
|
};
|
|
|
|
module_platform_driver(fec_driver);
|
|
|
|
MODULE_ALIAS("platform:"DRIVER_NAME);
|
|
MODULE_LICENSE("GPL");
|