mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
bb644913a7
WDOG_NO_WAY_OUT (3) and WDOG_ACTIVE (0) are the bit numbers, not a mask. So "data->wddev.status |= WDOG_ACTIVE;" was intended to set bit zero but it is a no-op. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
620 lines
16 KiB
C
620 lines
16 KiB
C
/***************************************************************************
|
|
* Copyright (C) 2010-2012 Hans de Goede <hdegoede@redhat.com> *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or modify *
|
|
* it under the terms of the GNU General Public License as published by *
|
|
* the Free Software Foundation; either version 2 of the License, or *
|
|
* (at your option) any later version. *
|
|
* *
|
|
* This program is distributed in the hope that it will be useful, *
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
|
* GNU General Public License for more details. *
|
|
* *
|
|
* You should have received a copy of the GNU General Public License *
|
|
* along with this program; if not, write to the *
|
|
* Free Software Foundation, Inc., *
|
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
|
***************************************************************************/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/kref.h>
|
|
#include <linux/slab.h>
|
|
#include "sch56xx-common.h"
|
|
|
|
/* Insmod parameters */
|
|
static int nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, int, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
#define SIO_SCH56XX_LD_EM 0x0C /* Embedded uController Logical Dev */
|
|
#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */
|
|
#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
|
|
|
|
#define SIO_REG_LDSEL 0x07 /* Logical device select */
|
|
#define SIO_REG_DEVID 0x20 /* Device ID */
|
|
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
|
|
#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */
|
|
|
|
#define SIO_SCH5627_ID 0xC6 /* Chipset ID */
|
|
#define SIO_SCH5636_ID 0xC7 /* Chipset ID */
|
|
|
|
#define REGION_LENGTH 10
|
|
|
|
#define SCH56XX_CMD_READ 0x02
|
|
#define SCH56XX_CMD_WRITE 0x03
|
|
|
|
/* Watchdog registers */
|
|
#define SCH56XX_REG_WDOG_PRESET 0x58B
|
|
#define SCH56XX_REG_WDOG_CONTROL 0x58C
|
|
#define SCH56XX_WDOG_TIME_BASE_SEC 0x01
|
|
#define SCH56XX_REG_WDOG_OUTPUT_ENABLE 0x58E
|
|
#define SCH56XX_WDOG_OUTPUT_ENABLE 0x02
|
|
|
|
struct sch56xx_watchdog_data {
|
|
u16 addr;
|
|
struct mutex *io_lock;
|
|
struct kref kref;
|
|
struct watchdog_info wdinfo;
|
|
struct watchdog_device wddev;
|
|
u8 watchdog_preset;
|
|
u8 watchdog_control;
|
|
u8 watchdog_output_enable;
|
|
};
|
|
|
|
static struct platform_device *sch56xx_pdev;
|
|
|
|
/* Super I/O functions */
|
|
static inline int superio_inb(int base, int reg)
|
|
{
|
|
outb(reg, base);
|
|
return inb(base + 1);
|
|
}
|
|
|
|
static inline int superio_enter(int base)
|
|
{
|
|
/* Don't step on other drivers' I/O space by accident */
|
|
if (!request_muxed_region(base, 2, "sch56xx")) {
|
|
pr_err("I/O address 0x%04x already in use\n", base);
|
|
return -EBUSY;
|
|
}
|
|
|
|
outb(SIO_UNLOCK_KEY, base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void superio_select(int base, int ld)
|
|
{
|
|
outb(SIO_REG_LDSEL, base);
|
|
outb(ld, base + 1);
|
|
}
|
|
|
|
static inline void superio_exit(int base)
|
|
{
|
|
outb(SIO_LOCK_KEY, base);
|
|
release_region(base, 2);
|
|
}
|
|
|
|
static int sch56xx_send_cmd(u16 addr, u8 cmd, u16 reg, u8 v)
|
|
{
|
|
u8 val;
|
|
int i;
|
|
/*
|
|
* According to SMSC for the commands we use the maximum time for
|
|
* the EM to respond is 15 ms, but testing shows in practice it
|
|
* responds within 15-32 reads, so we first busy poll, and if
|
|
* that fails sleep a bit and try again until we are way past
|
|
* the 15 ms maximum response time.
|
|
*/
|
|
const int max_busy_polls = 64;
|
|
const int max_lazy_polls = 32;
|
|
|
|
/* (Optional) Write-Clear the EC to Host Mailbox Register */
|
|
val = inb(addr + 1);
|
|
outb(val, addr + 1);
|
|
|
|
/* Set Mailbox Address Pointer to first location in Region 1 */
|
|
outb(0x00, addr + 2);
|
|
outb(0x80, addr + 3);
|
|
|
|
/* Write Request Packet Header */
|
|
outb(cmd, addr + 4); /* VREG Access Type read:0x02 write:0x03 */
|
|
outb(0x01, addr + 5); /* # of Entries: 1 Byte (8-bit) */
|
|
outb(0x04, addr + 2); /* Mailbox AP to first data entry loc. */
|
|
|
|
/* Write Value field */
|
|
if (cmd == SCH56XX_CMD_WRITE)
|
|
outb(v, addr + 4);
|
|
|
|
/* Write Address field */
|
|
outb(reg & 0xff, addr + 6);
|
|
outb(reg >> 8, addr + 7);
|
|
|
|
/* Execute the Random Access Command */
|
|
outb(0x01, addr); /* Write 01h to the Host-to-EC register */
|
|
|
|
/* EM Interface Polling "Algorithm" */
|
|
for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
|
|
if (i >= max_busy_polls)
|
|
msleep(1);
|
|
/* Read Interrupt source Register */
|
|
val = inb(addr + 8);
|
|
/* Write Clear the interrupt source bits */
|
|
if (val)
|
|
outb(val, addr + 8);
|
|
/* Command Completed ? */
|
|
if (val & 0x01)
|
|
break;
|
|
}
|
|
if (i == max_busy_polls + max_lazy_polls) {
|
|
pr_err("Max retries exceeded reading virtual "
|
|
"register 0x%04hx (%d)\n", reg, 1);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* According to SMSC we may need to retry this, but sofar I've always
|
|
* seen this succeed in 1 try.
|
|
*/
|
|
for (i = 0; i < max_busy_polls; i++) {
|
|
/* Read EC-to-Host Register */
|
|
val = inb(addr + 1);
|
|
/* Command Completed ? */
|
|
if (val == 0x01)
|
|
break;
|
|
|
|
if (i == 0)
|
|
pr_warn("EC reports: 0x%02x reading virtual register "
|
|
"0x%04hx\n", (unsigned int)val, reg);
|
|
}
|
|
if (i == max_busy_polls) {
|
|
pr_err("Max retries exceeded reading virtual "
|
|
"register 0x%04hx (%d)\n", reg, 2);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* According to the SMSC app note we should now do:
|
|
*
|
|
* Set Mailbox Address Pointer to first location in Region 1 *
|
|
* outb(0x00, addr + 2);
|
|
* outb(0x80, addr + 3);
|
|
*
|
|
* But if we do that things don't work, so let's not.
|
|
*/
|
|
|
|
/* Read Value field */
|
|
if (cmd == SCH56XX_CMD_READ)
|
|
return inb(addr + 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sch56xx_read_virtual_reg(u16 addr, u16 reg)
|
|
{
|
|
return sch56xx_send_cmd(addr, SCH56XX_CMD_READ, reg, 0);
|
|
}
|
|
EXPORT_SYMBOL(sch56xx_read_virtual_reg);
|
|
|
|
int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val)
|
|
{
|
|
return sch56xx_send_cmd(addr, SCH56XX_CMD_WRITE, reg, val);
|
|
}
|
|
EXPORT_SYMBOL(sch56xx_write_virtual_reg);
|
|
|
|
int sch56xx_read_virtual_reg16(u16 addr, u16 reg)
|
|
{
|
|
int lsb, msb;
|
|
|
|
/* Read LSB first, this will cause the matching MSB to be latched */
|
|
lsb = sch56xx_read_virtual_reg(addr, reg);
|
|
if (lsb < 0)
|
|
return lsb;
|
|
|
|
msb = sch56xx_read_virtual_reg(addr, reg + 1);
|
|
if (msb < 0)
|
|
return msb;
|
|
|
|
return lsb | (msb << 8);
|
|
}
|
|
EXPORT_SYMBOL(sch56xx_read_virtual_reg16);
|
|
|
|
int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg,
|
|
int high_nibble)
|
|
{
|
|
int msb, lsn;
|
|
|
|
/* Read MSB first, this will cause the matching LSN to be latched */
|
|
msb = sch56xx_read_virtual_reg(addr, msb_reg);
|
|
if (msb < 0)
|
|
return msb;
|
|
|
|
lsn = sch56xx_read_virtual_reg(addr, lsn_reg);
|
|
if (lsn < 0)
|
|
return lsn;
|
|
|
|
if (high_nibble)
|
|
return (msb << 4) | (lsn >> 4);
|
|
else
|
|
return (msb << 4) | (lsn & 0x0f);
|
|
}
|
|
EXPORT_SYMBOL(sch56xx_read_virtual_reg12);
|
|
|
|
/*
|
|
* Watchdog routines
|
|
*/
|
|
|
|
/* Release our data struct when we're unregistered *and*
|
|
all references to our watchdog device are released */
|
|
static void watchdog_release_resources(struct kref *r)
|
|
{
|
|
struct sch56xx_watchdog_data *data =
|
|
container_of(r, struct sch56xx_watchdog_data, kref);
|
|
kfree(data);
|
|
}
|
|
|
|
static int watchdog_set_timeout(struct watchdog_device *wddev,
|
|
unsigned int timeout)
|
|
{
|
|
struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
|
|
unsigned int resolution;
|
|
u8 control;
|
|
int ret;
|
|
|
|
/* 1 second or 60 second resolution? */
|
|
if (timeout <= 255)
|
|
resolution = 1;
|
|
else
|
|
resolution = 60;
|
|
|
|
if (timeout < resolution || timeout > (resolution * 255))
|
|
return -EINVAL;
|
|
|
|
if (resolution == 1)
|
|
control = data->watchdog_control | SCH56XX_WDOG_TIME_BASE_SEC;
|
|
else
|
|
control = data->watchdog_control & ~SCH56XX_WDOG_TIME_BASE_SEC;
|
|
|
|
if (data->watchdog_control != control) {
|
|
mutex_lock(data->io_lock);
|
|
ret = sch56xx_write_virtual_reg(data->addr,
|
|
SCH56XX_REG_WDOG_CONTROL,
|
|
control);
|
|
mutex_unlock(data->io_lock);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data->watchdog_control = control;
|
|
}
|
|
|
|
/*
|
|
* Remember new timeout value, but do not write as that (re)starts
|
|
* the watchdog countdown.
|
|
*/
|
|
data->watchdog_preset = DIV_ROUND_UP(timeout, resolution);
|
|
wddev->timeout = data->watchdog_preset * resolution;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int watchdog_start(struct watchdog_device *wddev)
|
|
{
|
|
struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
|
|
int ret;
|
|
u8 val;
|
|
|
|
/*
|
|
* The sch56xx's watchdog cannot really be started / stopped
|
|
* it is always running, but we can avoid the timer expiring
|
|
* from causing a system reset by clearing the output enable bit.
|
|
*
|
|
* The sch56xx's watchdog will set the watchdog event bit, bit 0
|
|
* of the second interrupt source register (at base-address + 9),
|
|
* when the timer expires.
|
|
*
|
|
* This will only cause a system reset if the 0-1 flank happens when
|
|
* output enable is true. Setting output enable after the flank will
|
|
* not cause a reset, nor will the timer expiring a second time.
|
|
* This means we must clear the watchdog event bit in case it is set.
|
|
*
|
|
* The timer may still be running (after a recent watchdog_stop) and
|
|
* mere milliseconds away from expiring, so the timer must be reset
|
|
* first!
|
|
*/
|
|
|
|
mutex_lock(data->io_lock);
|
|
|
|
/* 1. Reset the watchdog countdown counter */
|
|
ret = sch56xx_write_virtual_reg(data->addr, SCH56XX_REG_WDOG_PRESET,
|
|
data->watchdog_preset);
|
|
if (ret)
|
|
goto leave;
|
|
|
|
/* 2. Enable output */
|
|
val = data->watchdog_output_enable | SCH56XX_WDOG_OUTPUT_ENABLE;
|
|
ret = sch56xx_write_virtual_reg(data->addr,
|
|
SCH56XX_REG_WDOG_OUTPUT_ENABLE, val);
|
|
if (ret)
|
|
goto leave;
|
|
|
|
data->watchdog_output_enable = val;
|
|
|
|
/* 3. Clear the watchdog event bit if set */
|
|
val = inb(data->addr + 9);
|
|
if (val & 0x01)
|
|
outb(0x01, data->addr + 9);
|
|
|
|
leave:
|
|
mutex_unlock(data->io_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int watchdog_trigger(struct watchdog_device *wddev)
|
|
{
|
|
struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
|
|
int ret;
|
|
|
|
/* Reset the watchdog countdown counter */
|
|
mutex_lock(data->io_lock);
|
|
ret = sch56xx_write_virtual_reg(data->addr, SCH56XX_REG_WDOG_PRESET,
|
|
data->watchdog_preset);
|
|
mutex_unlock(data->io_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int watchdog_stop(struct watchdog_device *wddev)
|
|
{
|
|
struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
|
|
int ret = 0;
|
|
u8 val;
|
|
|
|
val = data->watchdog_output_enable & ~SCH56XX_WDOG_OUTPUT_ENABLE;
|
|
mutex_lock(data->io_lock);
|
|
ret = sch56xx_write_virtual_reg(data->addr,
|
|
SCH56XX_REG_WDOG_OUTPUT_ENABLE, val);
|
|
mutex_unlock(data->io_lock);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data->watchdog_output_enable = val;
|
|
return 0;
|
|
}
|
|
|
|
static void watchdog_ref(struct watchdog_device *wddev)
|
|
{
|
|
struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
|
|
|
|
kref_get(&data->kref);
|
|
}
|
|
|
|
static void watchdog_unref(struct watchdog_device *wddev)
|
|
{
|
|
struct sch56xx_watchdog_data *data = watchdog_get_drvdata(wddev);
|
|
|
|
kref_put(&data->kref, watchdog_release_resources);
|
|
}
|
|
|
|
static const struct watchdog_ops watchdog_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = watchdog_start,
|
|
.stop = watchdog_stop,
|
|
.ping = watchdog_trigger,
|
|
.set_timeout = watchdog_set_timeout,
|
|
.ref = watchdog_ref,
|
|
.unref = watchdog_unref,
|
|
};
|
|
|
|
struct sch56xx_watchdog_data *sch56xx_watchdog_register(struct device *parent,
|
|
u16 addr, u32 revision, struct mutex *io_lock, int check_enabled)
|
|
{
|
|
struct sch56xx_watchdog_data *data;
|
|
int err, control, output_enable;
|
|
|
|
/* Cache the watchdog registers */
|
|
mutex_lock(io_lock);
|
|
control =
|
|
sch56xx_read_virtual_reg(addr, SCH56XX_REG_WDOG_CONTROL);
|
|
output_enable =
|
|
sch56xx_read_virtual_reg(addr, SCH56XX_REG_WDOG_OUTPUT_ENABLE);
|
|
mutex_unlock(io_lock);
|
|
|
|
if (control < 0)
|
|
return NULL;
|
|
if (output_enable < 0)
|
|
return NULL;
|
|
if (check_enabled && !(output_enable & SCH56XX_WDOG_OUTPUT_ENABLE)) {
|
|
pr_warn("Watchdog not enabled by BIOS, not registering\n");
|
|
return NULL;
|
|
}
|
|
|
|
data = kzalloc(sizeof(struct sch56xx_watchdog_data), GFP_KERNEL);
|
|
if (!data)
|
|
return NULL;
|
|
|
|
data->addr = addr;
|
|
data->io_lock = io_lock;
|
|
kref_init(&data->kref);
|
|
|
|
strlcpy(data->wdinfo.identity, "sch56xx watchdog",
|
|
sizeof(data->wdinfo.identity));
|
|
data->wdinfo.firmware_version = revision;
|
|
data->wdinfo.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT;
|
|
if (!nowayout)
|
|
data->wdinfo.options |= WDIOF_MAGICCLOSE;
|
|
|
|
data->wddev.info = &data->wdinfo;
|
|
data->wddev.ops = &watchdog_ops;
|
|
data->wddev.parent = parent;
|
|
data->wddev.timeout = 60;
|
|
data->wddev.min_timeout = 1;
|
|
data->wddev.max_timeout = 255 * 60;
|
|
if (nowayout)
|
|
set_bit(WDOG_NO_WAY_OUT, &data->wddev.status);
|
|
if (output_enable & SCH56XX_WDOG_OUTPUT_ENABLE)
|
|
set_bit(WDOG_ACTIVE, &data->wddev.status);
|
|
|
|
/* Since the watchdog uses a downcounter there is no register to read
|
|
the BIOS set timeout from (if any was set at all) ->
|
|
Choose a preset which will give us a 1 minute timeout */
|
|
if (control & SCH56XX_WDOG_TIME_BASE_SEC)
|
|
data->watchdog_preset = 60; /* seconds */
|
|
else
|
|
data->watchdog_preset = 1; /* minute */
|
|
|
|
data->watchdog_control = control;
|
|
data->watchdog_output_enable = output_enable;
|
|
|
|
watchdog_set_drvdata(&data->wddev, data);
|
|
err = watchdog_register_device(&data->wddev);
|
|
if (err) {
|
|
pr_err("Registering watchdog chardev: %d\n", err);
|
|
kfree(data);
|
|
return NULL;
|
|
}
|
|
|
|
return data;
|
|
}
|
|
EXPORT_SYMBOL(sch56xx_watchdog_register);
|
|
|
|
void sch56xx_watchdog_unregister(struct sch56xx_watchdog_data *data)
|
|
{
|
|
watchdog_unregister_device(&data->wddev);
|
|
kref_put(&data->kref, watchdog_release_resources);
|
|
/* Don't touch data after this it may have been free-ed! */
|
|
}
|
|
EXPORT_SYMBOL(sch56xx_watchdog_unregister);
|
|
|
|
/*
|
|
* platform dev find, add and remove functions
|
|
*/
|
|
|
|
static int __init sch56xx_find(int sioaddr, unsigned short *address,
|
|
const char **name)
|
|
{
|
|
u8 devid;
|
|
int err;
|
|
|
|
err = superio_enter(sioaddr);
|
|
if (err)
|
|
return err;
|
|
|
|
devid = superio_inb(sioaddr, SIO_REG_DEVID);
|
|
switch (devid) {
|
|
case SIO_SCH5627_ID:
|
|
*name = "sch5627";
|
|
break;
|
|
case SIO_SCH5636_ID:
|
|
*name = "sch5636";
|
|
break;
|
|
default:
|
|
pr_debug("Unsupported device id: 0x%02x\n",
|
|
(unsigned int)devid);
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
superio_select(sioaddr, SIO_SCH56XX_LD_EM);
|
|
|
|
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
|
|
pr_warn("Device not activated\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Warning the order of the low / high byte is the other way around
|
|
* as on most other superio devices!!
|
|
*/
|
|
*address = superio_inb(sioaddr, SIO_REG_ADDR) |
|
|
superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
|
|
if (*address == 0) {
|
|
pr_warn("Base address not set\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
superio_exit(sioaddr);
|
|
return err;
|
|
}
|
|
|
|
static int __init sch56xx_device_add(unsigned short address, const char *name)
|
|
{
|
|
struct resource res = {
|
|
.start = address,
|
|
.end = address + REGION_LENGTH - 1,
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err;
|
|
|
|
sch56xx_pdev = platform_device_alloc(name, address);
|
|
if (!sch56xx_pdev)
|
|
return -ENOMEM;
|
|
|
|
res.name = sch56xx_pdev->name;
|
|
err = acpi_check_resource_conflict(&res);
|
|
if (err)
|
|
goto exit_device_put;
|
|
|
|
err = platform_device_add_resources(sch56xx_pdev, &res, 1);
|
|
if (err) {
|
|
pr_err("Device resource addition failed\n");
|
|
goto exit_device_put;
|
|
}
|
|
|
|
err = platform_device_add(sch56xx_pdev);
|
|
if (err) {
|
|
pr_err("Device addition failed\n");
|
|
goto exit_device_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(sch56xx_pdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int __init sch56xx_init(void)
|
|
{
|
|
int err;
|
|
unsigned short address;
|
|
const char *name;
|
|
|
|
err = sch56xx_find(0x4e, &address, &name);
|
|
if (err)
|
|
err = sch56xx_find(0x2e, &address, &name);
|
|
if (err)
|
|
return err;
|
|
|
|
return sch56xx_device_add(address, name);
|
|
}
|
|
|
|
static void __exit sch56xx_exit(void)
|
|
{
|
|
platform_device_unregister(sch56xx_pdev);
|
|
}
|
|
|
|
MODULE_DESCRIPTION("SMSC SCH56xx Hardware Monitoring Common Code");
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sch56xx_init);
|
|
module_exit(sch56xx_exit);
|