korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 08:44:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
b1653f23ea
linux/drivers/scsi/mpt3sas/mpt3sas_config.c
Sreekanth Reddy c84b06a48c mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs 
Modified the mpt3sas driver to have a single driver module which
supports both SAS 2.0 & SAS 3.0 HBA devices.

* Added SAS 2.0 HBA device IDs to the mpt3sas_pci_table pci table.

* Created two separate SCSI host templates for SAS2 and SAS3 HBAs so
  that, during the driver load time driver can use corresponding host
  template(based the pci device ID) while registering a scsi host
  adapter instance for that pci device.

* Registered two IOCTL devices, mpt2ctl is for SAS2 HBAs & mpt3ctl for
  SAS3 HBAs. Also updated the code to make sure that mpt2ctl device
  processes only those ioctl cmds issued for the SAS2 HBAs and mpt3ctl
  device processes only those ioctl cmds issued for the SAS3 HBAs.

* Added separate indexing for SAS2 and SAS3 HBAs.

* Replaced compile time check 'MPT2SAS_SCSI' to run time check
  'hba_mpi_version_belonged' whereever needed.

* Aliased this merged driver to mpt2sas using MODULE_ALIAS.

* Moved global varaible 'driver_name' to per adapter instance variable.

* Created two raid function template and used corresponding raid
  function templates based on the run time check
  'hba_mpi_version_belonged'.

* Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and
  renamed it as mpt3sas_warpdrive.c.

* Also renamed the functions in mpt3sas_warpdrive.c file to follow
  current driver function name convention.

* Updated the Makefile to build mpt3sas_warpdrive.o file for these
  WarpDrive-specific functions.

* Also in function mpt3sas_setup_direct_io(), used sector_div() API
  instead of division operator (which gives compilation errors on 32 bit
  machines).

* Removed mpt2sas files, mpt2sas directory & mpt3sas_module.c file.

* Added module parameter 'hbas_to_enumerate' which permits using this
  merged driver as a legacy mpt2sas driver or as a legacy mpt3sas
  driver.

  Here are the available options for this module parameter:

   0 - Merged driver which enumerates both SAS 2.0 & SAS 3.0 HBAs
   1 - Acts as legacy mpt2sas driver, which enumerates only SAS 2.0 HBAs
   2 - Acts as legacy mpt3sas driver, which enumerates only SAS 3.0 HBAs

* Removed mpt2sas entries from SCSI's Kconfig and Makefile files.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11 19:50:11 -05:00

1717 lines
54 KiB
C
Raw Blame History

/*
* This module provides common API for accessing firmware configuration pages
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
* Copyright (C) 2012-2014 LSI Corporation
* Copyright (C) 2013-2014 Avago Technologies
* (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include "mpt3sas_base.h"
/* local definitions */
/* Timeout for config page request (in seconds) */
#define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT 15
/* Common sgl flags for READING a config page. */
#define MPT3_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
| MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)
/* Common sgl flags for WRITING a config page. */
#define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
| MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
<< MPI2_SGE_FLAGS_SHIFT)
/**
* struct config_request - obtain dma memory via routine
* @sz: size
* @page: virt pointer
* @page_dma: phys pointer
*
*/
struct config_request {
u16 sz;
void *page;
dma_addr_t page_dma;
};
/**
* _config_display_some_debug - debug routine
* @ioc: per adapter object
* @smid: system request message index
* @calling_function_name: string pass from calling function
* @mpi_reply: reply message frame
* Context: none.
*
* Function for displaying debug info helpful when debugging issues
* in this module.
*/
static void
_config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
{
Mpi2ConfigRequest_t *mpi_request;
char *desc = NULL;
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
return;
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
case MPI2_CONFIG_PAGETYPE_IO_UNIT:
desc = "io_unit";
break;
case MPI2_CONFIG_PAGETYPE_IOC:
desc = "ioc";
break;
case MPI2_CONFIG_PAGETYPE_BIOS:
desc = "bios";
break;
case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
desc = "raid_volume";
break;
case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
desc = "manufaucturing";
break;
case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
desc = "physdisk";
break;
case MPI2_CONFIG_PAGETYPE_EXTENDED:
switch (mpi_request->ExtPageType) {
case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
desc = "sas_io_unit";
break;
case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
desc = "sas_expander";
break;
case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
desc = "sas_device";
break;
case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
desc = "sas_phy";
break;
case MPI2_CONFIG_EXTPAGETYPE_LOG:
desc = "log";
break;
case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
desc = "enclosure";
break;
case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
desc = "raid_config";
break;
case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
desc = "driver_mapping";
break;
}
break;
}
if (!desc)
return;
pr_info(MPT3SAS_FMT
"%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n",
ioc->name, calling_function_name, desc,
mpi_request->Header.PageNumber, mpi_request->Action,
le32_to_cpu(mpi_request->PageAddress), smid);
if (!mpi_reply)
return;
if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
pr_info(MPT3SAS_FMT
"\tiocstatus(0x%04x), loginfo(0x%08x)\n",
ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
}
/**
* _config_alloc_config_dma_memory - obtain physical memory
* @ioc: per adapter object
* @mem: struct config_request
*
* A wrapper for obtaining dma-able memory for config page request.
*
* Returns 0 for success, non-zero for failure.
*/
static int
_config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
struct config_request *mem)
{
int r = 0;
if (mem->sz > ioc->config_page_sz) {
mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
&mem->page_dma, GFP_KERNEL);
if (!mem->page) {
pr_err(MPT3SAS_FMT
"%s: dma_alloc_coherent failed asking for (%d) bytes!!\n",
ioc->name, __func__, mem->sz);
r = -ENOMEM;
}
} else { /* use tmp buffer if less than 512 bytes */
mem->page = ioc->config_page;
mem->page_dma = ioc->config_page_dma;
}
return r;
}
/**
* _config_free_config_dma_memory - wrapper to free the memory
* @ioc: per adapter object
* @mem: struct config_request
*
* A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
*
* Returns 0 for success, non-zero for failure.
*/
static void
_config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
struct config_request *mem)
{
if (mem->sz > ioc->config_page_sz)
dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
mem->page_dma);
}
/**
* mpt3sas_config_done - config page completion routine
* @ioc: per adapter object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: none.
*
* The callback handler when using _config_request.
*
* Return 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
u8
mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
if (ioc->config_cmds.status == MPT3_CMD_NOT_USED)
return 1;
if (ioc->config_cmds.smid != smid)
return 1;
ioc->config_cmds.status |= MPT3_CMD_COMPLETE;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
ioc->config_cmds.status |= MPT3_CMD_REPLY_VALID;
memcpy(ioc->config_cmds.reply, mpi_reply,
mpi_reply->MsgLength*4);
}
ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
ioc->config_cmds.smid = USHRT_MAX;
complete(&ioc->config_cmds.done);
return 1;
}
/**
* _config_request - main routine for sending config page requests
* @ioc: per adapter object
* @mpi_request: request message frame
* @mpi_reply: reply mf payload returned from firmware
* @timeout: timeout in seconds
* @config_page: contents of the config page
* @config_page_sz: size of config page
* Context: sleep
*
* A generic API for config page requests to firmware.
*
* The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling
* this API.
*
* The callback index is set inside `ioc->config_cb_idx.
*
* Returns 0 for success, non-zero for failure.
*/
static int
_config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
*mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
void *config_page, u16 config_page_sz)
{
u16 smid;
u32 ioc_state;
unsigned long timeleft;
Mpi2ConfigRequest_t *config_request;
int r;
u8 retry_count, issue_host_reset = 0;
u16 wait_state_count;
struct config_request mem;
u32 ioc_status = UINT_MAX;
mutex_lock(&ioc->config_cmds.mutex);
if (ioc->config_cmds.status != MPT3_CMD_NOT_USED) {
pr_err(MPT3SAS_FMT "%s: config_cmd in use\n",
ioc->name, __func__);
mutex_unlock(&ioc->config_cmds.mutex);
return -EAGAIN;
}
retry_count = 0;
memset(&mem, 0, sizeof(struct config_request));
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
if (config_page) {
mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
mpi_request->Header.PageType = mpi_reply->Header.PageType;
mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
mpi_request->ExtPageType = mpi_reply->ExtPageType;
if (mpi_request->Header.PageLength)
mem.sz = mpi_request->Header.PageLength * 4;
else
mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
r = _config_alloc_config_dma_memory(ioc, &mem);
if (r != 0)
goto out;
if (mpi_request->Action ==
MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
mpi_request->Action ==
MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
MPT3_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
mem.page_dma);
memcpy(mem.page, config_page, min_t(u16, mem.sz,
config_page_sz));
} else {
memset(config_page, 0, config_page_sz);
ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
MPT3_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
memset(mem.page, 0, min_t(u16, mem.sz, config_page_sz));
}
}
retry_config:
if (retry_count) {
if (retry_count > 2) { /* attempt only 2 retries */
r = -EFAULT;
goto free_mem;
}
pr_info(MPT3SAS_FMT "%s: attempting retry (%d)\n",
ioc->name, __func__, retry_count);
}
wait_state_count = 0;
ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
if (wait_state_count++ == MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT) {
pr_err(MPT3SAS_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
ioc->config_cmds.status = MPT3_CMD_NOT_USED;
r = -EFAULT;
goto free_mem;
}
ssleep(1);
ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
pr_info(MPT3SAS_FMT
"%s: waiting for operational state(count=%d)\n",
ioc->name, __func__, wait_state_count);
}
if (wait_state_count)
pr_info(MPT3SAS_FMT "%s: ioc is operational\n",
ioc->name, __func__);
smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx);
if (!smid) {
pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
ioc->config_cmds.status = MPT3_CMD_NOT_USED;
r = -EAGAIN;
goto free_mem;
}
r = 0;
memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t));
ioc->config_cmds.status = MPT3_CMD_PENDING;
config_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->config_cmds.smid = smid;
memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
_config_display_some_debug(ioc, smid, "config_request", NULL);
init_completion(&ioc->config_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
timeout*HZ);
if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
pr_err(MPT3SAS_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2ConfigRequest_t)/4);
retry_count++;
if (ioc->config_cmds.smid == smid)
mpt3sas_base_free_smid(ioc, smid);
if ((ioc->shost_recovery) || (ioc->config_cmds.status &
MPT3_CMD_RESET) || ioc->pci_error_recovery)
goto retry_config;
issue_host_reset = 1;
r = -EFAULT;
goto free_mem;
}
if (ioc->config_cmds.status & MPT3_CMD_REPLY_VALID) {
memcpy(mpi_reply, ioc->config_cmds.reply,
sizeof(Mpi2ConfigReply_t));
/* Reply Frame Sanity Checks to workaround FW issues */
if ((mpi_request->Header.PageType & 0xF) !=
(mpi_reply->Header.PageType & 0xF)) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \
" mpi_reply mismatch: Requested PageType(0x%02x)" \
" Reply PageType(0x%02x)\n", \
ioc->name, __func__,
(mpi_request->Header.PageType & 0xF),
(mpi_reply->Header.PageType & 0xF));
}
if (((mpi_request->Header.PageType & 0xF) ==
MPI2_CONFIG_PAGETYPE_EXTENDED) &&
mpi_request->ExtPageType != mpi_reply->ExtPageType) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
panic(KERN_WARNING MPT3SAS_FMT "%s: Firmware BUG:" \
" mpi_reply mismatch: Requested ExtPageType(0x%02x)"
" Reply ExtPageType(0x%02x)\n",
ioc->name, __func__, mpi_request->ExtPageType,
mpi_reply->ExtPageType);
}
ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
& MPI2_IOCSTATUS_MASK;
}
if (retry_count)
pr_info(MPT3SAS_FMT "%s: retry (%d) completed!!\n", \
ioc->name, __func__, retry_count);
if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
config_page && mpi_request->Action ==
MPI2_CONFIG_ACTION_PAGE_READ_CURRENT) {
u8 *p = (u8 *)mem.page;
/* Config Page Sanity Checks to workaround FW issues */
if (p) {
if ((mpi_request->Header.PageType & 0xF) !=
(p[3] & 0xF)) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
_debug_dump_config(p, min_t(u16, mem.sz,
config_page_sz)/4);
panic(KERN_WARNING MPT3SAS_FMT
"%s: Firmware BUG:" \
" config page mismatch:"
" Requested PageType(0x%02x)"
" Reply PageType(0x%02x)\n",
ioc->name, __func__,
(mpi_request->Header.PageType & 0xF),
(p[3] & 0xF));
}
if (((mpi_request->Header.PageType & 0xF) ==
MPI2_CONFIG_PAGETYPE_EXTENDED) &&
(mpi_request->ExtPageType != p[6])) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
_debug_dump_config(p, min_t(u16, mem.sz,
config_page_sz)/4);
panic(KERN_WARNING MPT3SAS_FMT
"%s: Firmware BUG:" \
" config page mismatch:"
" Requested ExtPageType(0x%02x)"
" Reply ExtPageType(0x%02x)\n",
ioc->name, __func__,
mpi_request->ExtPageType, p[6]);
}
}
memcpy(config_page, mem.page, min_t(u16, mem.sz,
config_page_sz));
}
free_mem:
if (config_page)
_config_free_config_dma_memory(ioc, &mem);
out:
ioc->config_cmds.status = MPT3_CMD_NOT_USED;
mutex_unlock(&ioc->config_cmds.mutex);
if (issue_host_reset)
mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 7;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING7_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sz);
out:
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply,
struct Mpi2ManufacturingPage10_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 10;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply,
struct Mpi2ManufacturingPage11_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 11;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply,
struct Mpi2ManufacturingPage11_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 11;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_bios_pg2 - obtain bios page 2
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
mpi_request.Header.PageNumber = 2;
mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_bios_pg3 - obtain bios page 3
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2BiosPage3_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
mpi_request.Header.PageNumber = 3;
mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg0 - obtain iounit page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg1 - obtain iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_set_iounit_pg1 - set iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg3 - obtain iounit page 3
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 3;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 8;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
mpi_request.Header.PageNumber = 8;
mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
mpi_request.Header.PageNumber = 0;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
mpi_request.Header.PageNumber = 1;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_number_hba_phys - obtain number of phys on the host
* @ioc: per adapter object
* @num_phys: pointer returned with the number of phys
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys)
{
Mpi2ConfigRequest_t mpi_request;
int r;
u16 ioc_status;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t config_page;
*num_phys = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
sizeof(Mpi2SasIOUnitPage0_t));
if (!r) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
*num_phys = config_page.NumPhys;
}
out:
return r;
}
/**
* mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Calling function should call config_get_number_hba_phys prior to
* this function, so enough memory is allocated for config_page.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Calling function should call config_get_number_hba_phys prior to
* this function, so enough memory is allocated for config_page.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Calling function should call config_get_number_hba_phys prior to
* this function, so enough memory is allocated for config_page.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
_config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_expander_pg0 - obtain expander page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: expander handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_expander_pg1 - obtain expander page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @phy_number: phy number
* @handle: expander handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
u16 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
(phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: expander handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_phy_pg0 - obtain phy page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @phy_number: phy number
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_phy_pg1 - obtain phy page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @phy_number: phy number
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: volume handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume
* @ioc: per adapter object
* @handle: volume handle
* @num_pds: returns pds count
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
u8 *num_pds)
{
Mpi2ConfigRequest_t mpi_request;
Mpi2RaidVolPage0_t config_page;
Mpi2ConfigReply_t mpi_reply;
int r;
u16 ioc_status;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
*num_pds = 0;
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
sizeof(Mpi2RaidVolPage0_t));
if (!r) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
*num_pds = config_page.NumPhysDisks;
}
out:
return r;
}
/**
* mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: volume handle
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
u32 handle, u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
* @form_specific: specific to the form
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
u32 form_specific)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | form_specific);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_volume_handle - returns volume handle for give hidden
* raid components
* @ioc: per adapter object
* @pd_handle: phys disk handle
* @volume_handle: volume handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
u16 *volume_handle)
{
Mpi2RaidConfigurationPage0_t *config_page = NULL;
Mpi2ConfigRequest_t mpi_request;
Mpi2ConfigReply_t mpi_reply;
int r, i, config_page_sz;
u16 ioc_status;
int config_num;
u16 element_type;
u16 phys_disk_dev_handle;
*volume_handle = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
mpi_request.Header.PageNumber = 0;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
config_page = kmalloc(config_page_sz, GFP_KERNEL);
if (!config_page) {
r = -1;
goto out;
}
config_num = 0xff;
while (1) {
mpi_request.PageAddress = cpu_to_le32(config_num +
MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
config_page_sz);
if (r)
goto out;
r = -1;
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
goto out;
for (i = 0; i < config_page->NumElements; i++) {
element_type = le16_to_cpu(config_page->
ConfigElement[i].ElementFlags) &
MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
if (element_type ==
MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
element_type ==
MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
phys_disk_dev_handle =
le16_to_cpu(config_page->ConfigElement[i].
PhysDiskDevHandle);
if (phys_disk_dev_handle == pd_handle) {
*volume_handle =
le16_to_cpu(config_page->
ConfigElement[i].VolDevHandle);
r = 0;
goto out;
}
} else if (element_type ==
MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
*volume_handle = 0;
r = 0;
goto out;
}
}
config_num = config_page->ConfigNum;
}
out:
kfree(config_page);
return r;
}
/**
* mpt3sas_config_get_volume_wwid - returns wwid given the volume handle
* @ioc: per adapter object
* @volume_handle: volume handle
* @wwid: volume wwid
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle,
u64 *wwid)
{
Mpi2ConfigReply_t mpi_reply;
Mpi2RaidVolPage1_t raid_vol_pg1;
*wwid = 0;
if (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
&raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
volume_handle))) {
*wwid = le64_to_cpu(raid_vol_pg1.WWID);
return 0;
} else
return -1;
}
Reference in New Issue View Git Blame Copy Permalink