mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
58ac8177ce
Fix the NO INT in the Multi-BLK IO in SD/MMC, and Multi-BLK read in SDIO on imx53. The CMDTYPE of the CMD register (offset 0xE) should be set to "11" when the STOP CMD12 is issued on imx53 to abort one open ended multi-blk IO. Otherwise the TC INT wouldn't be generated. In exact block transfer, the controller doesn't complete the operations automatically as required at the end of the transfer and remains on hold if the abort command is not sent on imx53. As a result, the TC flag is not asserted and SW receives timeout exception. Set bit1 of Vendor Spec register to fix it. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
332 lines
9.1 KiB
C
332 lines
9.1 KiB
C
/*
|
|
* Freescale eSDHC i.MX controller driver for the platform bus.
|
|
*
|
|
* derived from the OF-version.
|
|
*
|
|
* Copyright (c) 2010 Pengutronix e.K.
|
|
* Author: Wolfram Sang <w.sang@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sdhci-pltfm.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sdio.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/esdhc.h>
|
|
#include "sdhci.h"
|
|
#include "sdhci-pltfm.h"
|
|
#include "sdhci-esdhc.h"
|
|
|
|
/* VENDOR SPEC register */
|
|
#define SDHCI_VENDOR_SPEC 0xC0
|
|
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
|
|
|
|
#define ESDHC_FLAG_GPIO_FOR_CD_WP (1 << 0)
|
|
/*
|
|
* The CMDTYPE of the CMD register (offset 0xE) should be set to
|
|
* "11" when the STOP CMD12 is issued on imx53 to abort one
|
|
* open ended multi-blk IO. Otherwise the TC INT wouldn't
|
|
* be generated.
|
|
* In exact block transfer, the controller doesn't complete the
|
|
* operations automatically as required at the end of the
|
|
* transfer and remains on hold if the abort command is not sent.
|
|
* As a result, the TC flag is not asserted and SW received timeout
|
|
* exeception. Bit1 of Vendor Spec registor is used to fix it.
|
|
*/
|
|
#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
|
|
|
|
struct pltfm_imx_data {
|
|
int flags;
|
|
u32 scratchpad;
|
|
};
|
|
|
|
static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
|
|
{
|
|
void __iomem *base = host->ioaddr + (reg & ~0x3);
|
|
u32 shift = (reg & 0x3) * 8;
|
|
|
|
writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
|
|
}
|
|
|
|
static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
/* fake CARD_PRESENT flag on mx25/35 */
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
if (unlikely((reg == SDHCI_PRESENT_STATE)
|
|
&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP))) {
|
|
struct esdhc_platform_data *boarddata =
|
|
host->mmc->parent->platform_data;
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->cd_gpio)
|
|
&& gpio_get_value(boarddata->cd_gpio))
|
|
/* no card, if a valid gpio says so... */
|
|
val &= SDHCI_CARD_PRESENT;
|
|
else
|
|
/* ... in all other cases assume card is present */
|
|
val |= SDHCI_CARD_PRESENT;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
|
|
&& (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP)))
|
|
/*
|
|
* these interrupts won't work with a custom card_detect gpio
|
|
* (only applied to mx25/35)
|
|
*/
|
|
val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
|
|
|
|
if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (reg == SDHCI_INT_STATUS)
|
|
&& (val & SDHCI_INT_DATA_END))) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(reg == SDHCI_HOST_VERSION))
|
|
reg ^= 2;
|
|
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
switch (reg) {
|
|
case SDHCI_TRANSFER_MODE:
|
|
/*
|
|
* Postpone this write, we must do it together with a
|
|
* command write that is down below.
|
|
*/
|
|
if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
|
|
&& (host->cmd->data->blocks > 1)
|
|
&& (host->cmd->data->flags & MMC_DATA_READ)) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
imx_data->scratchpad = val;
|
|
return;
|
|
case SDHCI_COMMAND:
|
|
if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
|
|
&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
|
|
val |= SDHCI_CMD_ABORTCMD;
|
|
writel(val << 16 | imx_data->scratchpad,
|
|
host->ioaddr + SDHCI_TRANSFER_MODE);
|
|
return;
|
|
case SDHCI_BLOCK_SIZE:
|
|
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
|
|
break;
|
|
}
|
|
esdhc_clrset_le(host, 0xffff, val, reg);
|
|
}
|
|
|
|
static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
u32 new_val;
|
|
|
|
switch (reg) {
|
|
case SDHCI_POWER_CONTROL:
|
|
/*
|
|
* FSL put some DMA bits here
|
|
* If your board has a regulator, code should be here
|
|
*/
|
|
return;
|
|
case SDHCI_HOST_CONTROL:
|
|
/* FSL messed up here, so we can just keep those two */
|
|
new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
|
|
/* ensure the endianess */
|
|
new_val |= ESDHC_HOST_CONTROL_LE;
|
|
/* DMA mode bits are shifted */
|
|
new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
|
|
|
|
esdhc_clrset_le(host, 0xffff, new_val, reg);
|
|
return;
|
|
}
|
|
esdhc_clrset_le(host, 0xff, val, reg);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk) / 256 / 16;
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
|
|
{
|
|
struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->wp_gpio))
|
|
return gpio_get_value(boarddata->wp_gpio);
|
|
else
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static struct sdhci_ops sdhci_esdhc_ops = {
|
|
.read_l = esdhc_readl_le,
|
|
.read_w = esdhc_readw_le,
|
|
.write_l = esdhc_writel_le,
|
|
.write_w = esdhc_writew_le,
|
|
.write_b = esdhc_writeb_le,
|
|
.set_clock = esdhc_set_clock,
|
|
.get_max_clock = esdhc_pltfm_get_max_clock,
|
|
.get_min_clock = esdhc_pltfm_get_min_clock,
|
|
};
|
|
|
|
static irqreturn_t cd_irq(int irq, void *data)
|
|
{
|
|
struct sdhci_host *sdhost = (struct sdhci_host *)data;
|
|
|
|
tasklet_schedule(&sdhost->card_tasklet);
|
|
return IRQ_HANDLED;
|
|
};
|
|
|
|
static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pdata)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
|
|
struct clk *clk;
|
|
int err;
|
|
struct pltfm_imx_data *imx_data;
|
|
|
|
clk = clk_get(mmc_dev(host->mmc), NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(mmc_dev(host->mmc), "clk err\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
clk_enable(clk);
|
|
pltfm_host->clk = clk;
|
|
|
|
imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
|
|
if (!imx_data) {
|
|
clk_disable(pltfm_host->clk);
|
|
clk_put(pltfm_host->clk);
|
|
return -ENOMEM;
|
|
}
|
|
pltfm_host->priv = imx_data;
|
|
|
|
if (!cpu_is_mx25())
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
|
|
|
|
if (cpu_is_mx25() || cpu_is_mx35()) {
|
|
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
|
|
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
|
|
/* write_protect can't be routed to controller, use gpio */
|
|
sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
|
|
}
|
|
|
|
if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
|
|
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
|
|
|
|
if (boarddata) {
|
|
err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"no write-protect pin available!\n");
|
|
boarddata->wp_gpio = err;
|
|
}
|
|
|
|
err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"no card-detect pin available!\n");
|
|
goto no_card_detect_pin;
|
|
}
|
|
|
|
/* i.MX5x has issues to be researched */
|
|
if (!cpu_is_mx25() && !cpu_is_mx35())
|
|
goto not_supported;
|
|
|
|
err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
mmc_hostname(host->mmc), host);
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc), "request irq error\n");
|
|
goto no_card_detect_irq;
|
|
}
|
|
|
|
imx_data->flags |= ESDHC_FLAG_GPIO_FOR_CD_WP;
|
|
/* Now we have a working card_detect again */
|
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
}
|
|
|
|
return 0;
|
|
|
|
no_card_detect_irq:
|
|
gpio_free(boarddata->cd_gpio);
|
|
no_card_detect_pin:
|
|
boarddata->cd_gpio = err;
|
|
not_supported:
|
|
kfree(imx_data);
|
|
return 0;
|
|
}
|
|
|
|
static void esdhc_pltfm_exit(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->wp_gpio))
|
|
gpio_free(boarddata->wp_gpio);
|
|
|
|
if (boarddata && gpio_is_valid(boarddata->cd_gpio)) {
|
|
gpio_free(boarddata->cd_gpio);
|
|
|
|
if (!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION))
|
|
free_irq(gpio_to_irq(boarddata->cd_gpio), host);
|
|
}
|
|
|
|
clk_disable(pltfm_host->clk);
|
|
clk_put(pltfm_host->clk);
|
|
kfree(imx_data);
|
|
}
|
|
|
|
struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
|
|
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA
|
|
| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
|
|
/* ADMA has issues. Might be fixable */
|
|
.ops = &sdhci_esdhc_ops,
|
|
.init = esdhc_pltfm_init,
|
|
.exit = esdhc_pltfm_exit,
|
|
};
|