mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
a0386bba70
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
264 lines
6.0 KiB
C
264 lines
6.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* drivers/video/backlight/vgg2432a4.c
|
|
*
|
|
* VGG2432A4 (ILI9320) LCD controller driver.
|
|
*
|
|
* Copyright 2007 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <video/ili9320.h>
|
|
|
|
#include "ili9320.h"
|
|
|
|
/* Device initialisation sequences */
|
|
|
|
static const struct ili9320_reg vgg_init1[] = {
|
|
{
|
|
.address = ILI9320_POWER1,
|
|
.value = ILI9320_POWER1_AP(0) | ILI9320_POWER1_BT(0),
|
|
}, {
|
|
.address = ILI9320_POWER2,
|
|
.value = (ILI9320_POWER2_VC(7) |
|
|
ILI9320_POWER2_DC0(0) | ILI9320_POWER2_DC1(0)),
|
|
}, {
|
|
.address = ILI9320_POWER3,
|
|
.value = ILI9320_POWER3_VRH(0),
|
|
}, {
|
|
.address = ILI9320_POWER4,
|
|
.value = ILI9320_POWER4_VREOUT(0),
|
|
},
|
|
};
|
|
|
|
static const struct ili9320_reg vgg_init2[] = {
|
|
{
|
|
.address = ILI9320_POWER1,
|
|
.value = (ILI9320_POWER1_AP(3) | ILI9320_POWER1_APE |
|
|
ILI9320_POWER1_BT(7) | ILI9320_POWER1_SAP),
|
|
}, {
|
|
.address = ILI9320_POWER2,
|
|
.value = ILI9320_POWER2_VC(7) | ILI9320_POWER2_DC0(3),
|
|
}
|
|
};
|
|
|
|
static const struct ili9320_reg vgg_gamma[] = {
|
|
{
|
|
.address = ILI9320_GAMMA1,
|
|
.value = 0x0000,
|
|
}, {
|
|
.address = ILI9320_GAMMA2,
|
|
.value = 0x0505,
|
|
}, {
|
|
.address = ILI9320_GAMMA3,
|
|
.value = 0x0004,
|
|
}, {
|
|
.address = ILI9320_GAMMA4,
|
|
.value = 0x0006,
|
|
}, {
|
|
.address = ILI9320_GAMMA5,
|
|
.value = 0x0707,
|
|
}, {
|
|
.address = ILI9320_GAMMA6,
|
|
.value = 0x0105,
|
|
}, {
|
|
.address = ILI9320_GAMMA7,
|
|
.value = 0x0002,
|
|
}, {
|
|
.address = ILI9320_GAMMA8,
|
|
.value = 0x0707,
|
|
}, {
|
|
.address = ILI9320_GAMMA9,
|
|
.value = 0x0704,
|
|
}, {
|
|
.address = ILI9320_GAMMA10,
|
|
.value = 0x807,
|
|
}
|
|
|
|
};
|
|
|
|
static const struct ili9320_reg vgg_init0[] = {
|
|
[0] = {
|
|
/* set direction and scan mode gate */
|
|
.address = ILI9320_DRIVER,
|
|
.value = ILI9320_DRIVER_SS,
|
|
}, {
|
|
.address = ILI9320_DRIVEWAVE,
|
|
.value = (ILI9320_DRIVEWAVE_MUSTSET |
|
|
ILI9320_DRIVEWAVE_EOR | ILI9320_DRIVEWAVE_BC),
|
|
}, {
|
|
.address = ILI9320_ENTRYMODE,
|
|
.value = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
|
|
}, {
|
|
.address = ILI9320_RESIZING,
|
|
.value = 0x0,
|
|
},
|
|
};
|
|
|
|
|
|
static int vgg2432a4_lcd_init(struct ili9320 *lcd,
|
|
struct ili9320_platdata *cfg)
|
|
{
|
|
unsigned int addr;
|
|
int ret;
|
|
|
|
/* Set VCore before anything else (VGG243237-6UFLWA) */
|
|
ret = ili9320_write(lcd, 0x00e5, 0x8000);
|
|
if (ret)
|
|
goto err_initial;
|
|
|
|
/* Start the oscillator up before we can do anything else. */
|
|
ret = ili9320_write(lcd, ILI9320_OSCILATION, ILI9320_OSCILATION_OSC);
|
|
if (ret)
|
|
goto err_initial;
|
|
|
|
/* must wait at-lesat 10ms after starting */
|
|
mdelay(15);
|
|
|
|
ret = ili9320_write_regs(lcd, vgg_init0, ARRAY_SIZE(vgg_init0));
|
|
if (ret != 0)
|
|
goto err_initial;
|
|
|
|
ili9320_write(lcd, ILI9320_DISPLAY2, cfg->display2);
|
|
ili9320_write(lcd, ILI9320_DISPLAY3, cfg->display3);
|
|
ili9320_write(lcd, ILI9320_DISPLAY4, cfg->display4);
|
|
|
|
ili9320_write(lcd, ILI9320_RGB_IF1, cfg->rgb_if1);
|
|
ili9320_write(lcd, ILI9320_FRAMEMAKER, 0x0);
|
|
ili9320_write(lcd, ILI9320_RGB_IF2, cfg->rgb_if2);
|
|
|
|
ret = ili9320_write_regs(lcd, vgg_init1, ARRAY_SIZE(vgg_init1));
|
|
if (ret != 0)
|
|
goto err_vgg;
|
|
|
|
mdelay(300);
|
|
|
|
ret = ili9320_write_regs(lcd, vgg_init2, ARRAY_SIZE(vgg_init2));
|
|
if (ret != 0)
|
|
goto err_vgg2;
|
|
|
|
mdelay(100);
|
|
|
|
ili9320_write(lcd, ILI9320_POWER3, 0x13c);
|
|
|
|
mdelay(100);
|
|
|
|
ili9320_write(lcd, ILI9320_POWER4, 0x1c00);
|
|
ili9320_write(lcd, ILI9320_POWER7, 0x000e);
|
|
|
|
mdelay(100);
|
|
|
|
ili9320_write(lcd, ILI9320_GRAM_HORIZ_ADDR, 0x00);
|
|
ili9320_write(lcd, ILI9320_GRAM_VERT_ADD, 0x00);
|
|
|
|
ret = ili9320_write_regs(lcd, vgg_gamma, ARRAY_SIZE(vgg_gamma));
|
|
if (ret != 0)
|
|
goto err_vgg3;
|
|
|
|
ili9320_write(lcd, ILI9320_HORIZ_START, 0x0);
|
|
ili9320_write(lcd, ILI9320_HORIZ_END, cfg->hsize - 1);
|
|
ili9320_write(lcd, ILI9320_VERT_START, 0x0);
|
|
ili9320_write(lcd, ILI9320_VERT_END, cfg->vsize - 1);
|
|
|
|
ili9320_write(lcd, ILI9320_DRIVER2,
|
|
ILI9320_DRIVER2_NL(((cfg->vsize - 240) / 8) + 0x1D));
|
|
|
|
ili9320_write(lcd, ILI9320_BASE_IMAGE, 0x1);
|
|
ili9320_write(lcd, ILI9320_VERT_SCROLL, 0x00);
|
|
|
|
for (addr = ILI9320_PARTIAL1_POSITION; addr <= ILI9320_PARTIAL2_END;
|
|
addr++) {
|
|
ili9320_write(lcd, addr, 0x0);
|
|
}
|
|
|
|
ili9320_write(lcd, ILI9320_INTERFACE1, 0x10);
|
|
ili9320_write(lcd, ILI9320_INTERFACE2, cfg->interface2);
|
|
ili9320_write(lcd, ILI9320_INTERFACE3, cfg->interface3);
|
|
ili9320_write(lcd, ILI9320_INTERFACE4, cfg->interface4);
|
|
ili9320_write(lcd, ILI9320_INTERFACE5, cfg->interface5);
|
|
ili9320_write(lcd, ILI9320_INTERFACE6, cfg->interface6);
|
|
|
|
lcd->display1 = (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_DTE |
|
|
ILI9320_DISPLAY1_GON | ILI9320_DISPLAY1_BASEE |
|
|
0x40);
|
|
|
|
ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
|
|
|
|
return 0;
|
|
|
|
err_vgg3:
|
|
err_vgg2:
|
|
err_vgg:
|
|
err_initial:
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int vgg2432a4_suspend(struct device *dev)
|
|
{
|
|
return ili9320_suspend(dev_get_drvdata(dev));
|
|
}
|
|
static int vgg2432a4_resume(struct device *dev)
|
|
{
|
|
return ili9320_resume(dev_get_drvdata(dev));
|
|
}
|
|
#endif
|
|
|
|
static struct ili9320_client vgg2432a4_client = {
|
|
.name = "VGG2432A4",
|
|
.init = vgg2432a4_lcd_init,
|
|
};
|
|
|
|
/* Device probe */
|
|
|
|
static int vgg2432a4_probe(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
|
|
ret = ili9320_probe_spi(spi, &vgg2432a4_client);
|
|
if (ret != 0) {
|
|
dev_err(&spi->dev, "failed to initialise ili9320\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vgg2432a4_remove(struct spi_device *spi)
|
|
{
|
|
ili9320_remove(spi_get_drvdata(spi));
|
|
}
|
|
|
|
static void vgg2432a4_shutdown(struct spi_device *spi)
|
|
{
|
|
ili9320_shutdown(spi_get_drvdata(spi));
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(vgg2432a4_pm_ops, vgg2432a4_suspend, vgg2432a4_resume);
|
|
|
|
static struct spi_driver vgg2432a4_driver = {
|
|
.driver = {
|
|
.name = "VGG2432A4",
|
|
.pm = &vgg2432a4_pm_ops,
|
|
},
|
|
.probe = vgg2432a4_probe,
|
|
.remove = vgg2432a4_remove,
|
|
.shutdown = vgg2432a4_shutdown,
|
|
};
|
|
|
|
module_spi_driver(vgg2432a4_driver);
|
|
|
|
MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
|
|
MODULE_DESCRIPTION("VGG2432A4 LCD Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("spi:VGG2432A4");
|