mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
426 lines
10 KiB
C
426 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Simple driver for Texas Instruments LM3639 Backlight + Flash LED driver chip
|
|
* Copyright (C) 2012 Texas Instruments
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/platform_data/lm3639_bl.h>
|
|
|
|
#define REG_DEV_ID 0x00
|
|
#define REG_CHECKSUM 0x01
|
|
#define REG_BL_CONF_1 0x02
|
|
#define REG_BL_CONF_2 0x03
|
|
#define REG_BL_CONF_3 0x04
|
|
#define REG_BL_CONF_4 0x05
|
|
#define REG_FL_CONF_1 0x06
|
|
#define REG_FL_CONF_2 0x07
|
|
#define REG_FL_CONF_3 0x08
|
|
#define REG_IO_CTRL 0x09
|
|
#define REG_ENABLE 0x0A
|
|
#define REG_FLAG 0x0B
|
|
#define REG_MAX REG_FLAG
|
|
|
|
struct lm3639_chip_data {
|
|
struct device *dev;
|
|
struct lm3639_platform_data *pdata;
|
|
|
|
struct backlight_device *bled;
|
|
struct led_classdev cdev_flash;
|
|
struct led_classdev cdev_torch;
|
|
struct regmap *regmap;
|
|
|
|
unsigned int bled_mode;
|
|
unsigned int bled_map;
|
|
unsigned int last_flag;
|
|
};
|
|
|
|
/* initialize chip */
|
|
static int lm3639_chip_init(struct lm3639_chip_data *pchip)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_platform_data *pdata = pchip->pdata;
|
|
|
|
/* input pins config. */
|
|
ret =
|
|
regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x08,
|
|
pdata->pin_pwm);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
reg_val = (pdata->pin_pwm & 0x40) | pdata->pin_strobe | pdata->pin_tx;
|
|
ret = regmap_update_bits(pchip->regmap, REG_IO_CTRL, 0x7C, reg_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* init brightness */
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_4, pdata->init_brt_led);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_3, pdata->init_brt_led);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* output pins config. */
|
|
if (!pdata->init_brt_led) {
|
|
reg_val = pdata->fled_pins;
|
|
reg_val |= pdata->bled_pins;
|
|
} else {
|
|
reg_val = pdata->fled_pins;
|
|
reg_val |= pdata->bled_pins | 0x01;
|
|
}
|
|
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x79, reg_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return ret;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return ret;
|
|
}
|
|
|
|
/* update and get brightness */
|
|
static int lm3639_bled_update_status(struct backlight_device *bl)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip = bl_get_data(bl);
|
|
struct lm3639_platform_data *pdata = pchip->pdata;
|
|
|
|
ret = regmap_read(pchip->regmap, REG_FLAG, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (reg_val != 0)
|
|
dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
|
|
|
|
/* pwm control */
|
|
if (pdata->pin_pwm) {
|
|
if (pdata->pwm_set_intensity)
|
|
pdata->pwm_set_intensity(bl->props.brightness,
|
|
pdata->max_brt_led);
|
|
else
|
|
dev_err(pchip->dev,
|
|
"No pwm control func. in plat-data\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
/* i2c control and set brigtness */
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_4, bl->props.brightness);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = regmap_write(pchip->regmap, REG_BL_CONF_3, bl->props.brightness);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (!bl->props.brightness)
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x00);
|
|
else
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x01);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return bl->props.brightness;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access registers\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
static int lm3639_bled_get_brightness(struct backlight_device *bl)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip = bl_get_data(bl);
|
|
struct lm3639_platform_data *pdata = pchip->pdata;
|
|
|
|
if (pdata->pin_pwm) {
|
|
if (pdata->pwm_get_intensity)
|
|
bl->props.brightness = pdata->pwm_get_intensity();
|
|
else
|
|
dev_err(pchip->dev,
|
|
"No pwm control func. in plat-data\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
ret = regmap_read(pchip->regmap, REG_BL_CONF_1, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (reg_val & 0x10)
|
|
ret = regmap_read(pchip->regmap, REG_BL_CONF_4, ®_val);
|
|
else
|
|
ret = regmap_read(pchip->regmap, REG_BL_CONF_3, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
bl->props.brightness = reg_val;
|
|
|
|
return bl->props.brightness;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
return bl->props.brightness;
|
|
}
|
|
|
|
static const struct backlight_ops lm3639_bled_ops = {
|
|
.options = BL_CORE_SUSPENDRESUME,
|
|
.update_status = lm3639_bled_update_status,
|
|
.get_brightness = lm3639_bled_get_brightness,
|
|
};
|
|
|
|
/* backlight mapping mode */
|
|
static ssize_t lm3639_bled_mode_store(struct device *dev,
|
|
struct device_attribute *devAttr,
|
|
const char *buf, size_t size)
|
|
{
|
|
ssize_t ret;
|
|
struct lm3639_chip_data *pchip = dev_get_drvdata(dev);
|
|
unsigned int state;
|
|
|
|
ret = kstrtouint(buf, 10, &state);
|
|
if (ret)
|
|
goto out_input;
|
|
|
|
if (!state)
|
|
ret =
|
|
regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10,
|
|
0x00);
|
|
else
|
|
ret =
|
|
regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10,
|
|
0x10);
|
|
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return size;
|
|
|
|
out:
|
|
dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__);
|
|
return ret;
|
|
|
|
out_input:
|
|
dev_err(pchip->dev, "%s:input conversion fail\n", __func__);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR(bled_mode, S_IWUSR, NULL, lm3639_bled_mode_store);
|
|
|
|
/* torch */
|
|
static void lm3639_torch_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip;
|
|
|
|
pchip = container_of(cdev, struct lm3639_chip_data, cdev_torch);
|
|
|
|
ret = regmap_read(pchip->regmap, REG_FLAG, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (reg_val != 0)
|
|
dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
|
|
|
|
/* brightness 0 means off state */
|
|
if (!brightness) {
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00);
|
|
if (ret < 0)
|
|
goto out;
|
|
return;
|
|
}
|
|
|
|
ret = regmap_update_bits(pchip->regmap,
|
|
REG_FL_CONF_1, 0x70, (brightness - 1) << 4);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x02);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
}
|
|
|
|
/* flash */
|
|
static void lm3639_flash_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm3639_chip_data *pchip;
|
|
|
|
pchip = container_of(cdev, struct lm3639_chip_data, cdev_flash);
|
|
|
|
ret = regmap_read(pchip->regmap, REG_FLAG, ®_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (reg_val != 0)
|
|
dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
|
|
|
|
/* torch off before flash control */
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* brightness 0 means off state */
|
|
if (!brightness)
|
|
return;
|
|
|
|
ret = regmap_update_bits(pchip->regmap,
|
|
REG_FL_CONF_1, 0x0F, brightness - 1);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x06);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return;
|
|
out:
|
|
dev_err(pchip->dev, "i2c failed to access register\n");
|
|
}
|
|
|
|
static const struct regmap_config lm3639_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = REG_MAX,
|
|
};
|
|
|
|
static int lm3639_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct lm3639_chip_data *pchip;
|
|
struct lm3639_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct backlight_properties props;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(&client->dev, "i2c functionality check fail.\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&client->dev, "Needs Platform Data.\n");
|
|
return -ENODATA;
|
|
}
|
|
|
|
pchip = devm_kzalloc(&client->dev,
|
|
sizeof(struct lm3639_chip_data), GFP_KERNEL);
|
|
if (!pchip)
|
|
return -ENOMEM;
|
|
|
|
pchip->pdata = pdata;
|
|
pchip->dev = &client->dev;
|
|
|
|
pchip->regmap = devm_regmap_init_i2c(client, &lm3639_regmap);
|
|
if (IS_ERR(pchip->regmap)) {
|
|
ret = PTR_ERR(pchip->regmap);
|
|
dev_err(&client->dev, "fail : allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
i2c_set_clientdata(client, pchip);
|
|
|
|
/* chip initialize */
|
|
ret = lm3639_chip_init(pchip);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "fail : chip init\n");
|
|
goto err_out;
|
|
}
|
|
|
|
/* backlight */
|
|
props.type = BACKLIGHT_RAW;
|
|
props.brightness = pdata->init_brt_led;
|
|
props.max_brightness = pdata->max_brt_led;
|
|
pchip->bled =
|
|
devm_backlight_device_register(pchip->dev, "lm3639_bled",
|
|
pchip->dev, pchip, &lm3639_bled_ops,
|
|
&props);
|
|
if (IS_ERR(pchip->bled)) {
|
|
dev_err(&client->dev, "fail : backlight register\n");
|
|
ret = PTR_ERR(pchip->bled);
|
|
goto err_out;
|
|
}
|
|
|
|
ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed : add sysfs entries\n");
|
|
goto err_out;
|
|
}
|
|
|
|
/* flash */
|
|
pchip->cdev_flash.name = "lm3639_flash";
|
|
pchip->cdev_flash.max_brightness = 16;
|
|
pchip->cdev_flash.brightness_set = lm3639_flash_brightness_set;
|
|
ret = led_classdev_register((struct device *)
|
|
&client->dev, &pchip->cdev_flash);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "fail : flash register\n");
|
|
goto err_flash;
|
|
}
|
|
|
|
/* torch */
|
|
pchip->cdev_torch.name = "lm3639_torch";
|
|
pchip->cdev_torch.max_brightness = 8;
|
|
pchip->cdev_torch.brightness_set = lm3639_torch_brightness_set;
|
|
ret = led_classdev_register((struct device *)
|
|
&client->dev, &pchip->cdev_torch);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "fail : torch register\n");
|
|
goto err_torch;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_torch:
|
|
led_classdev_unregister(&pchip->cdev_flash);
|
|
err_flash:
|
|
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
|
|
err_out:
|
|
return ret;
|
|
}
|
|
|
|
static void lm3639_remove(struct i2c_client *client)
|
|
{
|
|
struct lm3639_chip_data *pchip = i2c_get_clientdata(client);
|
|
|
|
regmap_write(pchip->regmap, REG_ENABLE, 0x00);
|
|
|
|
led_classdev_unregister(&pchip->cdev_torch);
|
|
led_classdev_unregister(&pchip->cdev_flash);
|
|
if (pchip->bled)
|
|
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
|
|
}
|
|
|
|
static const struct i2c_device_id lm3639_id[] = {
|
|
{LM3639_NAME, 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, lm3639_id);
|
|
static struct i2c_driver lm3639_i2c_driver = {
|
|
.driver = {
|
|
.name = LM3639_NAME,
|
|
},
|
|
.probe = lm3639_probe,
|
|
.remove = lm3639_remove,
|
|
.id_table = lm3639_id,
|
|
};
|
|
|
|
module_i2c_driver(lm3639_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639");
|
|
MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
|
|
MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|