linux/drivers/video/backlight/adp8860_bl.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

816 lines
22 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Backlight driver for Analog Devices ADP8860 Backlight Devices
*
* Copyright 2009-2010 Analog Devices Inc.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/platform_data/adp8860.h>
#define ADP8860_EXT_FEATURES
#define ADP8860_USE_LEDS
#define ADP8860_MFDVID 0x00 /* Manufacturer and device ID */
#define ADP8860_MDCR 0x01 /* Device mode and status */
#define ADP8860_MDCR2 0x02 /* Device mode and Status Register 2 */
#define ADP8860_INTR_EN 0x03 /* Interrupts enable */
#define ADP8860_CFGR 0x04 /* Configuration register */
#define ADP8860_BLSEN 0x05 /* Sink enable backlight or independent */
#define ADP8860_BLOFF 0x06 /* Backlight off timeout */
#define ADP8860_BLDIM 0x07 /* Backlight dim timeout */
#define ADP8860_BLFR 0x08 /* Backlight fade in and out rates */
#define ADP8860_BLMX1 0x09 /* Backlight (Brightness Level 1-daylight) maximum current */
#define ADP8860_BLDM1 0x0A /* Backlight (Brightness Level 1-daylight) dim current */
#define ADP8860_BLMX2 0x0B /* Backlight (Brightness Level 2-office) maximum current */
#define ADP8860_BLDM2 0x0C /* Backlight (Brightness Level 2-office) dim current */
#define ADP8860_BLMX3 0x0D /* Backlight (Brightness Level 3-dark) maximum current */
#define ADP8860_BLDM3 0x0E /* Backlight (Brightness Level 3-dark) dim current */
#define ADP8860_ISCFR 0x0F /* Independent sink current fade control register */
#define ADP8860_ISCC 0x10 /* Independent sink current control register */
#define ADP8860_ISCT1 0x11 /* Independent Sink Current Timer Register LED[7:5] */
#define ADP8860_ISCT2 0x12 /* Independent Sink Current Timer Register LED[4:1] */
#define ADP8860_ISCF 0x13 /* Independent sink current fade register */
#define ADP8860_ISC7 0x14 /* Independent Sink Current LED7 */
#define ADP8860_ISC6 0x15 /* Independent Sink Current LED6 */
#define ADP8860_ISC5 0x16 /* Independent Sink Current LED5 */
#define ADP8860_ISC4 0x17 /* Independent Sink Current LED4 */
#define ADP8860_ISC3 0x18 /* Independent Sink Current LED3 */
#define ADP8860_ISC2 0x19 /* Independent Sink Current LED2 */
#define ADP8860_ISC1 0x1A /* Independent Sink Current LED1 */
#define ADP8860_CCFG 0x1B /* Comparator configuration */
#define ADP8860_CCFG2 0x1C /* Second comparator configuration */
#define ADP8860_L2_TRP 0x1D /* L2 comparator reference */
#define ADP8860_L2_HYS 0x1E /* L2 hysteresis */
#define ADP8860_L3_TRP 0x1F /* L3 comparator reference */
#define ADP8860_L3_HYS 0x20 /* L3 hysteresis */
#define ADP8860_PH1LEVL 0x21 /* First phototransistor ambient light level-low byte register */
#define ADP8860_PH1LEVH 0x22 /* First phototransistor ambient light level-high byte register */
#define ADP8860_PH2LEVL 0x23 /* Second phototransistor ambient light level-low byte register */
#define ADP8860_PH2LEVH 0x24 /* Second phototransistor ambient light level-high byte register */
#define ADP8860_MANUFID 0x0 /* Analog Devices ADP8860 Manufacturer ID */
#define ADP8861_MANUFID 0x4 /* Analog Devices ADP8861 Manufacturer ID */
#define ADP8863_MANUFID 0x2 /* Analog Devices ADP8863 Manufacturer ID */
#define ADP8860_DEVID(x) ((x) & 0xF)
#define ADP8860_MANID(x) ((x) >> 4)
/* MDCR Device mode and status */
#define INT_CFG (1 << 6)
#define NSTBY (1 << 5)
#define DIM_EN (1 << 4)
#define GDWN_DIS (1 << 3)
#define SIS_EN (1 << 2)
#define CMP_AUTOEN (1 << 1)
#define BLEN (1 << 0)
/* ADP8860_CCFG Main ALS comparator level enable */
#define L3_EN (1 << 1)
#define L2_EN (1 << 0)
#define CFGR_BLV_SHIFT 3
#define CFGR_BLV_MASK 0x3
#define ADP8860_FLAG_LED_MASK 0xFF
#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4))
#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
#define ALS_CCFG_VAL(filt) ((0x7 & filt) << 5)
enum {
adp8860,
adp8861,
adp8863
};
struct adp8860_led {
struct led_classdev cdev;
struct work_struct work;
struct i2c_client *client;
enum led_brightness new_brightness;
int id;
int flags;
};
struct adp8860_bl {
struct i2c_client *client;
struct backlight_device *bl;
struct adp8860_led *led;
struct adp8860_backlight_platform_data *pdata;
struct mutex lock;
unsigned long cached_daylight_max;
int id;
int revid;
int current_brightness;
unsigned en_ambl_sens:1;
unsigned gdwn_dis:1;
};
static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val)
{
int ret;
ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0) {
dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
return ret;
}
*val = (uint8_t)ret;
return 0;
}
static int adp8860_write(struct i2c_client *client, u8 reg, u8 val)
{
return i2c_smbus_write_byte_data(client, reg, val);
}
static int adp8860_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
{
struct adp8860_bl *data = i2c_get_clientdata(client);
uint8_t reg_val;
int ret;
mutex_lock(&data->lock);
ret = adp8860_read(client, reg, &reg_val);
if (!ret && ((reg_val & bit_mask) != bit_mask)) {
reg_val |= bit_mask;
ret = adp8860_write(client, reg, reg_val);
}
mutex_unlock(&data->lock);
return ret;
}
static int adp8860_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
{
struct adp8860_bl *data = i2c_get_clientdata(client);
uint8_t reg_val;
int ret;
mutex_lock(&data->lock);
ret = adp8860_read(client, reg, &reg_val);
if (!ret && (reg_val & bit_mask)) {
reg_val &= ~bit_mask;
ret = adp8860_write(client, reg, reg_val);
}
mutex_unlock(&data->lock);
return ret;
}
/*
* Independent sink / LED
*/
#if defined(ADP8860_USE_LEDS)
static void adp8860_led_work(struct work_struct *work)
{
struct adp8860_led *led = container_of(work, struct adp8860_led, work);
adp8860_write(led->client, ADP8860_ISC1 - led->id + 1,
led->new_brightness >> 1);
}
static void adp8860_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct adp8860_led *led;
led = container_of(led_cdev, struct adp8860_led, cdev);
led->new_brightness = value;
schedule_work(&led->work);
}
static int adp8860_led_setup(struct adp8860_led *led)
{
struct i2c_client *client = led->client;
int ret = 0;
ret = adp8860_write(client, ADP8860_ISC1 - led->id + 1, 0);
ret |= adp8860_set_bits(client, ADP8860_ISCC, 1 << (led->id - 1));
if (led->id > 4)
ret |= adp8860_set_bits(client, ADP8860_ISCT1,
(led->flags & 0x3) << ((led->id - 5) * 2));
else
ret |= adp8860_set_bits(client, ADP8860_ISCT2,
(led->flags & 0x3) << ((led->id - 1) * 2));
return ret;
}
static int adp8860_led_probe(struct i2c_client *client)
{
struct adp8860_backlight_platform_data *pdata =
dev_get_platdata(&client->dev);
struct adp8860_bl *data = i2c_get_clientdata(client);
struct adp8860_led *led, *led_dat;
struct led_info *cur_led;
int ret, i;
led = devm_kcalloc(&client->dev, pdata->num_leds, sizeof(*led),
GFP_KERNEL);
if (led == NULL)
return -ENOMEM;
ret = adp8860_write(client, ADP8860_ISCFR, pdata->led_fade_law);
ret = adp8860_write(client, ADP8860_ISCT1,
(pdata->led_on_time & 0x3) << 6);
ret |= adp8860_write(client, ADP8860_ISCF,
FADE_VAL(pdata->led_fade_in, pdata->led_fade_out));
if (ret) {
dev_err(&client->dev, "failed to write\n");
return ret;
}
for (i = 0; i < pdata->num_leds; ++i) {
cur_led = &pdata->leds[i];
led_dat = &led[i];
led_dat->id = cur_led->flags & ADP8860_FLAG_LED_MASK;
if (led_dat->id > 7 || led_dat->id < 1) {
dev_err(&client->dev, "Invalid LED ID %d\n",
led_dat->id);
ret = -EINVAL;
goto err;
}
if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) {
dev_err(&client->dev, "LED %d used by Backlight\n",
led_dat->id);
ret = -EBUSY;
goto err;
}
led_dat->cdev.name = cur_led->name;
led_dat->cdev.default_trigger = cur_led->default_trigger;
led_dat->cdev.brightness_set = adp8860_led_set;
led_dat->cdev.brightness = LED_OFF;
led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT;
led_dat->client = client;
led_dat->new_brightness = LED_OFF;
INIT_WORK(&led_dat->work, adp8860_led_work);
ret = led_classdev_register(&client->dev, &led_dat->cdev);
if (ret) {
dev_err(&client->dev, "failed to register LED %d\n",
led_dat->id);
goto err;
}
ret = adp8860_led_setup(led_dat);
if (ret) {
dev_err(&client->dev, "failed to write\n");
i++;
goto err;
}
}
data->led = led;
return 0;
err:
for (i = i - 1; i >= 0; --i) {
led_classdev_unregister(&led[i].cdev);
cancel_work_sync(&led[i].work);
}
return ret;
}
static int adp8860_led_remove(struct i2c_client *client)
{
struct adp8860_backlight_platform_data *pdata =
dev_get_platdata(&client->dev);
struct adp8860_bl *data = i2c_get_clientdata(client);
int i;
for (i = 0; i < pdata->num_leds; i++) {
led_classdev_unregister(&data->led[i].cdev);
cancel_work_sync(&data->led[i].work);
}
return 0;
}
#else
static int adp8860_led_probe(struct i2c_client *client)
{
return 0;
}
static int adp8860_led_remove(struct i2c_client *client)
{
return 0;
}
#endif
static int adp8860_bl_set(struct backlight_device *bl, int brightness)
{
struct adp8860_bl *data = bl_get_data(bl);
struct i2c_client *client = data->client;
int ret = 0;
if (data->en_ambl_sens) {
if ((brightness > 0) && (brightness < ADP8860_MAX_BRIGHTNESS)) {
/* Disable Ambient Light auto adjust */
ret |= adp8860_clr_bits(client, ADP8860_MDCR,
CMP_AUTOEN);
ret |= adp8860_write(client, ADP8860_BLMX1, brightness);
} else {
/*
* MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
* restore daylight l1 sysfs brightness
*/
ret |= adp8860_write(client, ADP8860_BLMX1,
data->cached_daylight_max);
ret |= adp8860_set_bits(client, ADP8860_MDCR,
CMP_AUTOEN);
}
} else
ret |= adp8860_write(client, ADP8860_BLMX1, brightness);
if (data->current_brightness && brightness == 0)
ret |= adp8860_set_bits(client,
ADP8860_MDCR, DIM_EN);
else if (data->current_brightness == 0 && brightness)
ret |= adp8860_clr_bits(client,
ADP8860_MDCR, DIM_EN);
if (!ret)
data->current_brightness = brightness;
return ret;
}
static int adp8860_bl_update_status(struct backlight_device *bl)
{
return adp8860_bl_set(bl, backlight_get_brightness(bl));
}
static int adp8860_bl_get_brightness(struct backlight_device *bl)
{
struct adp8860_bl *data = bl_get_data(bl);
return data->current_brightness;
}
static const struct backlight_ops adp8860_bl_ops = {
.update_status = adp8860_bl_update_status,
.get_brightness = adp8860_bl_get_brightness,
};
static int adp8860_bl_setup(struct backlight_device *bl)
{
struct adp8860_bl *data = bl_get_data(bl);
struct i2c_client *client = data->client;
struct adp8860_backlight_platform_data *pdata = data->pdata;
int ret = 0;
ret |= adp8860_write(client, ADP8860_BLSEN, ~pdata->bl_led_assign);
ret |= adp8860_write(client, ADP8860_BLMX1, pdata->l1_daylight_max);
ret |= adp8860_write(client, ADP8860_BLDM1, pdata->l1_daylight_dim);
if (data->en_ambl_sens) {
data->cached_daylight_max = pdata->l1_daylight_max;
ret |= adp8860_write(client, ADP8860_BLMX2,
pdata->l2_office_max);
ret |= adp8860_write(client, ADP8860_BLDM2,
pdata->l2_office_dim);
ret |= adp8860_write(client, ADP8860_BLMX3,
pdata->l3_dark_max);
ret |= adp8860_write(client, ADP8860_BLDM3,
pdata->l3_dark_dim);
ret |= adp8860_write(client, ADP8860_L2_TRP, pdata->l2_trip);
ret |= adp8860_write(client, ADP8860_L2_HYS, pdata->l2_hyst);
ret |= adp8860_write(client, ADP8860_L3_TRP, pdata->l3_trip);
ret |= adp8860_write(client, ADP8860_L3_HYS, pdata->l3_hyst);
ret |= adp8860_write(client, ADP8860_CCFG, L2_EN | L3_EN |
ALS_CCFG_VAL(pdata->abml_filt));
}
ret |= adp8860_write(client, ADP8860_CFGR,
BL_CFGR_VAL(pdata->bl_fade_law, 0));
ret |= adp8860_write(client, ADP8860_BLFR, FADE_VAL(pdata->bl_fade_in,
pdata->bl_fade_out));
ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY |
(data->gdwn_dis ? GDWN_DIS : 0));
return ret;
}
static ssize_t adp8860_show(struct device *dev, char *buf, int reg)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
int error;
uint8_t reg_val;
mutex_lock(&data->lock);
error = adp8860_read(data->client, reg, &reg_val);
mutex_unlock(&data->lock);
if (error < 0)
return error;
return sprintf(buf, "%u\n", reg_val);
}
static ssize_t adp8860_store(struct device *dev, const char *buf,
size_t count, int reg)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
unsigned long val;
int ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&data->lock);
adp8860_write(data->client, reg, val);
mutex_unlock(&data->lock);
return count;
}
static ssize_t adp8860_bl_l3_dark_max_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return adp8860_show(dev, buf, ADP8860_BLMX3);
}
static ssize_t adp8860_bl_l3_dark_max_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
return adp8860_store(dev, buf, count, ADP8860_BLMX3);
}
static DEVICE_ATTR(l3_dark_max, 0664, adp8860_bl_l3_dark_max_show,
adp8860_bl_l3_dark_max_store);
static ssize_t adp8860_bl_l2_office_max_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return adp8860_show(dev, buf, ADP8860_BLMX2);
}
static ssize_t adp8860_bl_l2_office_max_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
return adp8860_store(dev, buf, count, ADP8860_BLMX2);
}
static DEVICE_ATTR(l2_office_max, 0664, adp8860_bl_l2_office_max_show,
adp8860_bl_l2_office_max_store);
static ssize_t adp8860_bl_l1_daylight_max_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return adp8860_show(dev, buf, ADP8860_BLMX1);
}
static ssize_t adp8860_bl_l1_daylight_max_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
int ret = kstrtoul(buf, 10, &data->cached_daylight_max);
if (ret)
return ret;
return adp8860_store(dev, buf, count, ADP8860_BLMX1);
}
static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show,
adp8860_bl_l1_daylight_max_store);
static ssize_t adp8860_bl_l3_dark_dim_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return adp8860_show(dev, buf, ADP8860_BLDM3);
}
static ssize_t adp8860_bl_l3_dark_dim_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return adp8860_store(dev, buf, count, ADP8860_BLDM3);
}
static DEVICE_ATTR(l3_dark_dim, 0664, adp8860_bl_l3_dark_dim_show,
adp8860_bl_l3_dark_dim_store);
static ssize_t adp8860_bl_l2_office_dim_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return adp8860_show(dev, buf, ADP8860_BLDM2);
}
static ssize_t adp8860_bl_l2_office_dim_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return adp8860_store(dev, buf, count, ADP8860_BLDM2);
}
static DEVICE_ATTR(l2_office_dim, 0664, adp8860_bl_l2_office_dim_show,
adp8860_bl_l2_office_dim_store);
static ssize_t adp8860_bl_l1_daylight_dim_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return adp8860_show(dev, buf, ADP8860_BLDM1);
}
static ssize_t adp8860_bl_l1_daylight_dim_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return adp8860_store(dev, buf, count, ADP8860_BLDM1);
}
static DEVICE_ATTR(l1_daylight_dim, 0664, adp8860_bl_l1_daylight_dim_show,
adp8860_bl_l1_daylight_dim_store);
#ifdef ADP8860_EXT_FEATURES
static ssize_t adp8860_bl_ambient_light_level_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
int error;
uint8_t reg_val;
uint16_t ret_val;
mutex_lock(&data->lock);
error = adp8860_read(data->client, ADP8860_PH1LEVL, &reg_val);
if (!error) {
ret_val = reg_val;
error = adp8860_read(data->client, ADP8860_PH1LEVH, &reg_val);
}
mutex_unlock(&data->lock);
if (error)
return error;
/* Return 13-bit conversion value for the first light sensor */
ret_val += (reg_val & 0x1F) << 8;
return sprintf(buf, "%u\n", ret_val);
}
static DEVICE_ATTR(ambient_light_level, 0444,
adp8860_bl_ambient_light_level_show, NULL);
static ssize_t adp8860_bl_ambient_light_zone_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
int error;
uint8_t reg_val;
mutex_lock(&data->lock);
error = adp8860_read(data->client, ADP8860_CFGR, &reg_val);
mutex_unlock(&data->lock);
if (error < 0)
return error;
return sprintf(buf, "%u\n",
((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1);
}
static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct adp8860_bl *data = dev_get_drvdata(dev);
unsigned long val;
uint8_t reg_val;
int ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
if (val == 0) {
/* Enable automatic ambient light sensing */
adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
} else if ((val > 0) && (val <= 3)) {
/* Disable automatic ambient light sensing */
adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
/* Set user supplied ambient light zone */
mutex_lock(&data->lock);
ret = adp8860_read(data->client, ADP8860_CFGR, &reg_val);
if (!ret) {
reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
reg_val |= (val - 1) << CFGR_BLV_SHIFT;
adp8860_write(data->client, ADP8860_CFGR, reg_val);
}
mutex_unlock(&data->lock);
}
return count;
}
static DEVICE_ATTR(ambient_light_zone, 0664,
adp8860_bl_ambient_light_zone_show,
adp8860_bl_ambient_light_zone_store);
#endif
static struct attribute *adp8860_bl_attributes[] = {
&dev_attr_l3_dark_max.attr,
&dev_attr_l3_dark_dim.attr,
&dev_attr_l2_office_max.attr,
&dev_attr_l2_office_dim.attr,
&dev_attr_l1_daylight_max.attr,
&dev_attr_l1_daylight_dim.attr,
#ifdef ADP8860_EXT_FEATURES
&dev_attr_ambient_light_level.attr,
&dev_attr_ambient_light_zone.attr,
#endif
NULL
};
static const struct attribute_group adp8860_bl_attr_group = {
.attrs = adp8860_bl_attributes,
};
static int adp8860_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct backlight_device *bl;
struct adp8860_bl *data;
struct adp8860_backlight_platform_data *pdata =
dev_get_platdata(&client->dev);
struct backlight_properties props;
uint8_t reg_val;
int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
return -EIO;
}
if (!pdata) {
dev_err(&client->dev, "no platform data?\n");
return -EINVAL;
}
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
ret = adp8860_read(client, ADP8860_MFDVID, &reg_val);
if (ret < 0)
return ret;
switch (ADP8860_MANID(reg_val)) {
case ADP8863_MANUFID:
data->gdwn_dis = !!pdata->gdwn_dis;
fallthrough;
case ADP8860_MANUFID:
data->en_ambl_sens = !!pdata->en_ambl_sens;
break;
case ADP8861_MANUFID:
data->gdwn_dis = !!pdata->gdwn_dis;
break;
default:
dev_err(&client->dev, "failed to probe\n");
return -ENODEV;
}
/* It's confirmed that the DEVID field is actually a REVID */
data->revid = ADP8860_DEVID(reg_val);
data->client = client;
data->pdata = pdata;
data->id = id->driver_data;
data->current_brightness = 0;
i2c_set_clientdata(client, data);
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_RAW;
props.max_brightness = ADP8860_MAX_BRIGHTNESS;
mutex_init(&data->lock);
bl = devm_backlight_device_register(&client->dev,
dev_driver_string(&client->dev),
&client->dev, data, &adp8860_bl_ops, &props);
if (IS_ERR(bl)) {
dev_err(&client->dev, "failed to register backlight\n");
return PTR_ERR(bl);
}
bl->props.brightness = ADP8860_MAX_BRIGHTNESS;
data->bl = bl;
if (data->en_ambl_sens)
ret = sysfs_create_group(&bl->dev.kobj,
&adp8860_bl_attr_group);
if (ret) {
dev_err(&client->dev, "failed to register sysfs\n");
return ret;
}
ret = adp8860_bl_setup(bl);
if (ret) {
ret = -EIO;
goto out;
}
backlight_update_status(bl);
dev_info(&client->dev, "%s Rev.%d Backlight\n",
client->name, data->revid);
if (pdata->num_leds)
adp8860_led_probe(client);
return 0;
out:
if (data->en_ambl_sens)
sysfs_remove_group(&data->bl->dev.kobj,
&adp8860_bl_attr_group);
return ret;
}
static void adp8860_remove(struct i2c_client *client)
{
struct adp8860_bl *data = i2c_get_clientdata(client);
adp8860_clr_bits(client, ADP8860_MDCR, NSTBY);
if (data->led)
adp8860_led_remove(client);
if (data->en_ambl_sens)
sysfs_remove_group(&data->bl->dev.kobj,
&adp8860_bl_attr_group);
}
#ifdef CONFIG_PM_SLEEP
static int adp8860_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
adp8860_clr_bits(client, ADP8860_MDCR, NSTBY);
return 0;
}
static int adp8860_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
adp8860_set_bits(client, ADP8860_MDCR, NSTBY | BLEN);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(adp8860_i2c_pm_ops, adp8860_i2c_suspend,
adp8860_i2c_resume);
static const struct i2c_device_id adp8860_id[] = {
{ "adp8860", adp8860 },
{ "adp8861", adp8861 },
{ "adp8863", adp8863 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adp8860_id);
static struct i2c_driver adp8860_driver = {
.driver = {
.name = KBUILD_MODNAME,
.pm = &adp8860_i2c_pm_ops,
},
.probe = adp8860_probe,
.remove = adp8860_remove,
.id_table = adp8860_id,
};
module_i2c_driver(adp8860_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
MODULE_DESCRIPTION("ADP8860 Backlight driver");