linux/drivers/scsi/lpfc/lpfc_nvme.c
James Smart 25ac2c970b scsi: lpfc: Fix EEH support for NVMe I/O
Injecting errors on the PCI slot while the driver is handling NVMe I/O will
cause crashes and hangs.

There are several rather difficult scenarios occurring. The main issue is
that the adapter can report a PCI error before or simultaneously to the PCI
subsystem reporting the error. Both paths have different entry points and
currently there is no interlock between them. Thus multiple teardown paths
are competing and all heck breaks loose.

Complicating things is the NVMs path. To a large degree, I/O was able to be
shutdown for a full FC port on the SCSI stack. But on NVMe, there isn't a
similar call. At best, it works on a per-controller basis, but even at the
controller level, it's a controller "reset" call. All of which means I/O is
still flowing on different CPUs with reset paths expecting hw access
(mailbox commands) to execute properly.

The following modifications are made:

 - A new flag is set in PCI error entrypoints so the driver can track being
   called by that path.

 - An interlock is added in the SLI hw error path and the PCI error path
   such that only one of the paths proceeds with the teardown logic.

 - RPI cleanup is patched such that RPIs are marked unregistered w/o mbx
   cmds in cases of hw error.

 - If entering the SLI port re-init calls, a case where SLI error teardown
   was quick and beat the PCI calls now reporting error, check whether the
   SLI port is still live on the PCI bus.

 - In the PCI reset code to bring the adapter back, recheck the IRQ
   settings. Different checks for SLI3 vs SLI4.

 - In I/O completions, that may be called as part of the cleanup or
   underway just before the hw error, check the state of the adapter.  If
   in error, shortcut handling that would expect further adapter
   completions as the hw error won't be sending them.

 - In routines waiting on I/O completions, which may have been in progress
   prior to the hw error, detect the device is being torn down and abort
   from their waits and just give up. This points to a larger issue in the
   driver on ref-counting for data structures, as it doesn't have
   ref-counting on q and port structures. We'll do this fix for now as it
   would be a major rework to be done differently.

 - Fix the NVMe cleanup to simulate NVMe I/O completions if I/O is being
   failed back due to hw error.

 - In I/O buf allocation, done at the start of new I/Os, check hw state and
   fail if hw error.

Link: https://lore.kernel.org/r/20210910233159.115896-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00

2750 lines
80 KiB
C

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.broadcom.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
********************************************************************/
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/unaligned.h>
#include <linux/crc-t10dif.h>
#include <net/checksum.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
#include "lpfc_version.h"
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc.h"
#include "lpfc_nvme.h"
#include "lpfc_scsi.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_debugfs.h"
/* NVME initiator-based functions */
static struct lpfc_io_buf *
lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
int idx, int expedite);
static void
lpfc_release_nvme_buf(struct lpfc_hba *, struct lpfc_io_buf *);
static struct nvme_fc_port_template lpfc_nvme_template;
/**
* lpfc_nvme_create_queue -
* @pnvme_lport: Transport localport that LS is to be issued from
* @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
* @qsize: Size of the queue in bytes
* @handle: An opaque driver handle used in follow-up calls.
*
* Driver registers this routine to preallocate and initialize any
* internal data structures to bind the @qidx to its internal IO queues.
* A hardware queue maps (qidx) to a specific driver MSI-X vector/EQ/CQ/WQ.
*
* Return value :
* 0 - Success
* -EINVAL - Unsupported input value.
* -ENOMEM - Could not alloc necessary memory
**/
static int
lpfc_nvme_create_queue(struct nvme_fc_local_port *pnvme_lport,
unsigned int qidx, u16 qsize,
void **handle)
{
struct lpfc_nvme_lport *lport;
struct lpfc_vport *vport;
struct lpfc_nvme_qhandle *qhandle;
char *str;
if (!pnvme_lport->private)
return -ENOMEM;
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
vport = lport->vport;
qhandle = kzalloc(sizeof(struct lpfc_nvme_qhandle), GFP_KERNEL);
if (qhandle == NULL)
return -ENOMEM;
qhandle->cpu_id = raw_smp_processor_id();
qhandle->qidx = qidx;
/*
* NVME qidx == 0 is the admin queue, so both admin queue
* and first IO queue will use MSI-X vector and associated
* EQ/CQ/WQ at index 0. After that they are sequentially assigned.
*/
if (qidx) {
str = "IO "; /* IO queue */
qhandle->index = ((qidx - 1) %
lpfc_nvme_template.max_hw_queues);
} else {
str = "ADM"; /* Admin queue */
qhandle->index = qidx;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
"6073 Binding %s HdwQueue %d (cpu %d) to "
"hdw_queue %d qhandle x%px\n", str,
qidx, qhandle->cpu_id, qhandle->index, qhandle);
*handle = (void *)qhandle;
return 0;
}
/**
* lpfc_nvme_delete_queue -
* @pnvme_lport: Transport localport that LS is to be issued from
* @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
* @handle: An opaque driver handle from lpfc_nvme_create_queue
*
* Driver registers this routine to free
* any internal data structures to bind the @qidx to its internal
* IO queues.
*
* Return value :
* 0 - Success
* TODO: What are the failure codes.
**/
static void
lpfc_nvme_delete_queue(struct nvme_fc_local_port *pnvme_lport,
unsigned int qidx,
void *handle)
{
struct lpfc_nvme_lport *lport;
struct lpfc_vport *vport;
if (!pnvme_lport->private)
return;
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
vport = lport->vport;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
"6001 ENTER. lpfc_pnvme x%px, qidx x%x qhandle x%px\n",
lport, qidx, handle);
kfree(handle);
}
static void
lpfc_nvme_localport_delete(struct nvme_fc_local_port *localport)
{
struct lpfc_nvme_lport *lport = localport->private;
lpfc_printf_vlog(lport->vport, KERN_INFO, LOG_NVME,
"6173 localport x%px delete complete\n",
lport);
/* release any threads waiting for the unreg to complete */
if (lport->vport->localport)
complete(lport->lport_unreg_cmp);
}
/* lpfc_nvme_remoteport_delete
*
* @remoteport: Pointer to an nvme transport remoteport instance.
*
* This is a template downcall. NVME transport calls this function
* when it has completed the unregistration of a previously
* registered remoteport.
*
* Return value :
* None
*/
static void
lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
{
struct lpfc_nvme_rport *rport = remoteport->private;
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
u32 fc4_xpt_flags;
ndlp = rport->ndlp;
if (!ndlp) {
pr_err("**** %s: NULL ndlp on rport x%px remoteport x%px\n",
__func__, rport, remoteport);
goto rport_err;
}
vport = ndlp->vport;
if (!vport) {
pr_err("**** %s: Null vport on ndlp x%px, ste x%x rport x%px\n",
__func__, ndlp, ndlp->nlp_state, rport);
goto rport_err;
}
fc4_xpt_flags = NVME_XPT_REGD | SCSI_XPT_REGD;
/* Remove this rport from the lport's list - memory is owned by the
* transport. Remove the ndlp reference for the NVME transport before
* calling state machine to remove the node.
*/
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6146 remoteport delete of remoteport x%px, ndlp x%px "
"DID x%x xflags x%x\n",
remoteport, ndlp, ndlp->nlp_DID, ndlp->fc4_xpt_flags);
spin_lock_irq(&ndlp->lock);
/* The register rebind might have occurred before the delete
* downcall. Guard against this race.
*/
if (ndlp->fc4_xpt_flags & NVME_XPT_UNREG_WAIT)
ndlp->fc4_xpt_flags &= ~(NVME_XPT_UNREG_WAIT | NVME_XPT_REGD);
spin_unlock_irq(&ndlp->lock);
/* On a devloss timeout event, one more put is executed provided the
* NVME and SCSI rport unregister requests are complete. If the vport
* is unloading, this extra put is executed by lpfc_drop_node.
*/
if (!(ndlp->fc4_xpt_flags & fc4_xpt_flags))
lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
rport_err:
return;
}
/**
* lpfc_nvme_handle_lsreq - Process an unsolicited NVME LS request
* @phba: pointer to lpfc hba data structure.
* @axchg: pointer to exchange context for the NVME LS request
*
* This routine is used for processing an asychronously received NVME LS
* request. Any remaining validation is done and the LS is then forwarded
* to the nvme-fc transport via nvme_fc_rcv_ls_req().
*
* The calling sequence should be: nvme_fc_rcv_ls_req() -> (processing)
* -> lpfc_nvme_xmt_ls_rsp/cmp -> req->done.
* __lpfc_nvme_xmt_ls_rsp_cmp should free the allocated axchg.
*
* Returns 0 if LS was handled and delivered to the transport
* Returns 1 if LS failed to be handled and should be dropped
*/
int
lpfc_nvme_handle_lsreq(struct lpfc_hba *phba,
struct lpfc_async_xchg_ctx *axchg)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
struct lpfc_vport *vport;
struct lpfc_nvme_rport *lpfc_rport;
struct nvme_fc_remote_port *remoteport;
struct lpfc_nvme_lport *lport;
uint32_t *payload = axchg->payload;
int rc;
vport = axchg->ndlp->vport;
lpfc_rport = axchg->ndlp->nrport;
if (!lpfc_rport)
return -EINVAL;
remoteport = lpfc_rport->remoteport;
if (!vport->localport)
return -EINVAL;
lport = vport->localport->private;
if (!lport)
return -EINVAL;
rc = nvme_fc_rcv_ls_req(remoteport, &axchg->ls_rsp, axchg->payload,
axchg->size);
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC,
"6205 NVME Unsol rcv: sz %d rc %d: %08x %08x %08x "
"%08x %08x %08x\n",
axchg->size, rc,
*payload, *(payload+1), *(payload+2),
*(payload+3), *(payload+4), *(payload+5));
if (!rc)
return 0;
#endif
return 1;
}
/**
* __lpfc_nvme_ls_req_cmp - Generic completion handler for a NVME
* LS request.
* @phba: Pointer to HBA context object
* @vport: The local port that issued the LS
* @cmdwqe: Pointer to driver command WQE object.
* @wcqe: Pointer to driver response CQE object.
*
* This function is the generic completion handler for NVME LS requests.
* The function updates any states and statistics, calls the transport
* ls_req done() routine, then tears down the command and buffers used
* for the LS request.
**/
void
__lpfc_nvme_ls_req_cmp(struct lpfc_hba *phba, struct lpfc_vport *vport,
struct lpfc_iocbq *cmdwqe,
struct lpfc_wcqe_complete *wcqe)
{
struct nvmefc_ls_req *pnvme_lsreq;
struct lpfc_dmabuf *buf_ptr;
struct lpfc_nodelist *ndlp;
uint32_t status;
pnvme_lsreq = (struct nvmefc_ls_req *)cmdwqe->context2;
ndlp = (struct lpfc_nodelist *)cmdwqe->context1;
status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6047 NVMEx LS REQ x%px cmpl DID %x Xri: %x "
"status %x reason x%x cmd:x%px lsreg:x%px bmp:x%px "
"ndlp:x%px\n",
pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
cmdwqe->sli4_xritag, status,
(wcqe->parameter & 0xffff),
cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp);
lpfc_nvmeio_data(phba, "NVMEx LS CMPL: xri x%x stat x%x parm x%x\n",
cmdwqe->sli4_xritag, status, wcqe->parameter);
if (cmdwqe->context3) {
buf_ptr = (struct lpfc_dmabuf *)cmdwqe->context3;
lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
kfree(buf_ptr);
cmdwqe->context3 = NULL;
}
if (pnvme_lsreq->done)
pnvme_lsreq->done(pnvme_lsreq, status);
else
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6046 NVMEx cmpl without done call back? "
"Data x%px DID %x Xri: %x status %x\n",
pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
cmdwqe->sli4_xritag, status);
if (ndlp) {
lpfc_nlp_put(ndlp);
cmdwqe->context1 = NULL;
}
lpfc_sli_release_iocbq(phba, cmdwqe);
}
static void
lpfc_nvme_ls_req_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
struct lpfc_wcqe_complete *wcqe)
{
struct lpfc_vport *vport = cmdwqe->vport;
struct lpfc_nvme_lport *lport;
uint32_t status;
status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK;
if (vport->localport) {
lport = (struct lpfc_nvme_lport *)vport->localport->private;
if (lport) {
atomic_inc(&lport->fc4NvmeLsCmpls);
if (status) {
if (bf_get(lpfc_wcqe_c_xb, wcqe))
atomic_inc(&lport->cmpl_ls_xb);
atomic_inc(&lport->cmpl_ls_err);
}
}
}
__lpfc_nvme_ls_req_cmp(phba, vport, cmdwqe, wcqe);
}
static int
lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
struct lpfc_dmabuf *inp,
struct nvmefc_ls_req *pnvme_lsreq,
void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_wcqe_complete *),
struct lpfc_nodelist *ndlp, uint32_t num_entry,
uint32_t tmo, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
union lpfc_wqe128 *wqe;
struct lpfc_iocbq *genwqe;
struct ulp_bde64 *bpl;
struct ulp_bde64 bde;
int i, rc, xmit_len, first_len;
/* Allocate buffer for command WQE */
genwqe = lpfc_sli_get_iocbq(phba);
if (genwqe == NULL)
return 1;
wqe = &genwqe->wqe;
/* Initialize only 64 bytes */
memset(wqe, 0, sizeof(union lpfc_wqe));
genwqe->context3 = (uint8_t *)bmp;
genwqe->iocb_flag |= LPFC_IO_NVME_LS;
/* Save for completion so we can release these resources */
genwqe->context1 = lpfc_nlp_get(ndlp);
if (!genwqe->context1) {
dev_warn(&phba->pcidev->dev,
"Warning: Failed node ref, not sending LS_REQ\n");
lpfc_sli_release_iocbq(phba, genwqe);
return 1;
}
genwqe->context2 = (uint8_t *)pnvme_lsreq;
/* Fill in payload, bp points to frame payload */
if (!tmo)
/* FC spec states we need 3 * ratov for CT requests */
tmo = (3 * phba->fc_ratov);
/* For this command calculate the xmit length of the request bde. */
xmit_len = 0;
first_len = 0;
bpl = (struct ulp_bde64 *)bmp->virt;
for (i = 0; i < num_entry; i++) {
bde.tus.w = bpl[i].tus.w;
if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64)
break;
xmit_len += bde.tus.f.bdeSize;
if (i == 0)
first_len = xmit_len;
}
genwqe->rsvd2 = num_entry;
genwqe->hba_wqidx = 0;
/* Words 0 - 2 */
wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
wqe->generic.bde.tus.f.bdeSize = first_len;
wqe->generic.bde.addrLow = bpl[0].addrLow;
wqe->generic.bde.addrHigh = bpl[0].addrHigh;
/* Word 3 */
wqe->gen_req.request_payload_len = first_len;
/* Word 4 */
/* Word 5 */
bf_set(wqe_dfctl, &wqe->gen_req.wge_ctl, 0);
bf_set(wqe_si, &wqe->gen_req.wge_ctl, 1);
bf_set(wqe_la, &wqe->gen_req.wge_ctl, 1);
bf_set(wqe_rctl, &wqe->gen_req.wge_ctl, FC_RCTL_ELS4_REQ);
bf_set(wqe_type, &wqe->gen_req.wge_ctl, FC_TYPE_NVME);
/* Word 6 */
bf_set(wqe_ctxt_tag, &wqe->gen_req.wqe_com,
phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
bf_set(wqe_xri_tag, &wqe->gen_req.wqe_com, genwqe->sli4_xritag);
/* Word 7 */
bf_set(wqe_tmo, &wqe->gen_req.wqe_com, tmo);
bf_set(wqe_class, &wqe->gen_req.wqe_com, CLASS3);
bf_set(wqe_cmnd, &wqe->gen_req.wqe_com, CMD_GEN_REQUEST64_WQE);
bf_set(wqe_ct, &wqe->gen_req.wqe_com, SLI4_CT_RPI);
/* Word 8 */
wqe->gen_req.wqe_com.abort_tag = genwqe->iotag;
/* Word 9 */
bf_set(wqe_reqtag, &wqe->gen_req.wqe_com, genwqe->iotag);
/* Word 10 */
bf_set(wqe_dbde, &wqe->gen_req.wqe_com, 1);
bf_set(wqe_iod, &wqe->gen_req.wqe_com, LPFC_WQE_IOD_READ);
bf_set(wqe_qosd, &wqe->gen_req.wqe_com, 1);
bf_set(wqe_lenloc, &wqe->gen_req.wqe_com, LPFC_WQE_LENLOC_NONE);
bf_set(wqe_ebde_cnt, &wqe->gen_req.wqe_com, 0);
/* Word 11 */
bf_set(wqe_cqid, &wqe->gen_req.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
bf_set(wqe_cmd_type, &wqe->gen_req.wqe_com, OTHER_COMMAND);
/* Issue GEN REQ WQE for NPORT <did> */
genwqe->wqe_cmpl = cmpl;
genwqe->iocb_cmpl = NULL;
genwqe->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
genwqe->vport = vport;
genwqe->retry = retry;
lpfc_nvmeio_data(phba, "NVME LS XMIT: xri x%x iotag x%x to x%06x\n",
genwqe->sli4_xritag, genwqe->iotag, ndlp->nlp_DID);
rc = lpfc_sli4_issue_wqe(phba, &phba->sli4_hba.hdwq[0], genwqe);
if (rc) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6045 Issue GEN REQ WQE to NPORT x%x "
"Data: x%x x%x rc x%x\n",
ndlp->nlp_DID, genwqe->iotag,
vport->port_state, rc);
lpfc_nlp_put(ndlp);
lpfc_sli_release_iocbq(phba, genwqe);
return 1;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC | LOG_ELS,
"6050 Issue GEN REQ WQE to NPORT x%x "
"Data: oxid: x%x state: x%x wq:x%px lsreq:x%px "
"bmp:x%px xmit:%d 1st:%d\n",
ndlp->nlp_DID, genwqe->sli4_xritag,
vport->port_state,
genwqe, pnvme_lsreq, bmp, xmit_len, first_len);
return 0;
}
/**
* __lpfc_nvme_ls_req - Generic service routine to issue an NVME LS request
* @vport: The local port issuing the LS
* @ndlp: The remote port to send the LS to
* @pnvme_lsreq: Pointer to LS request structure from the transport
* @gen_req_cmp: Completion call-back
*
* Routine validates the ndlp, builds buffers and sends a GEN_REQUEST
* WQE to perform the LS operation.
*
* Return value :
* 0 - Success
* non-zero: various error codes, in form of -Exxx
**/
int
__lpfc_nvme_ls_req(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct nvmefc_ls_req *pnvme_lsreq,
void (*gen_req_cmp)(struct lpfc_hba *phba,
struct lpfc_iocbq *cmdwqe,
struct lpfc_wcqe_complete *wcqe))
{
struct lpfc_dmabuf *bmp;
struct ulp_bde64 *bpl;
int ret;
uint16_t ntype, nstate;
if (!ndlp) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6051 NVMEx LS REQ: Bad NDLP x%px, Failing "
"LS Req\n",
ndlp);
return -ENODEV;
}
ntype = ndlp->nlp_type;
nstate = ndlp->nlp_state;
if ((ntype & NLP_NVME_TARGET && nstate != NLP_STE_MAPPED_NODE) ||
(ntype & NLP_NVME_INITIATOR && nstate != NLP_STE_UNMAPPED_NODE)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6088 NVMEx LS REQ: Fail DID x%06x not "
"ready for IO. Type x%x, State x%x\n",
ndlp->nlp_DID, ntype, nstate);
return -ENODEV;
}
if (!vport->phba->sli4_hba.nvmels_wq)
return -ENOMEM;
/*
* there are two dma buf in the request, actually there is one and
* the second one is just the start address + cmd size.
* Before calling lpfc_nvme_gen_req these buffers need to be wrapped
* in a lpfc_dmabuf struct. When freeing we just free the wrapper
* because the nvem layer owns the data bufs.
* We do not have to break these packets open, we don't care what is
* in them. And we do not have to look at the resonse data, we only
* care that we got a response. All of the caring is going to happen
* in the nvme-fc layer.
*/
bmp = kmalloc(sizeof(*bmp), GFP_KERNEL);
if (!bmp) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6044 NVMEx LS REQ: Could not alloc LS buf "
"for DID %x\n",
ndlp->nlp_DID);
return -ENOMEM;
}
bmp->virt = lpfc_mbuf_alloc(vport->phba, MEM_PRI, &(bmp->phys));
if (!bmp->virt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6042 NVMEx LS REQ: Could not alloc mbuf "
"for DID %x\n",
ndlp->nlp_DID);
kfree(bmp);
return -ENOMEM;
}
INIT_LIST_HEAD(&bmp->list);
bpl = (struct ulp_bde64 *)bmp->virt;
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rqstdma));
bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rqstdma));
bpl->tus.f.bdeFlags = 0;
bpl->tus.f.bdeSize = pnvme_lsreq->rqstlen;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rspdma));
bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rspdma));
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
bpl->tus.f.bdeSize = pnvme_lsreq->rsplen;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6149 NVMEx LS REQ: Issue to DID 0x%06x lsreq x%px, "
"rqstlen:%d rsplen:%d %pad %pad\n",
ndlp->nlp_DID, pnvme_lsreq, pnvme_lsreq->rqstlen,
pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
&pnvme_lsreq->rspdma);
ret = lpfc_nvme_gen_req(vport, bmp, pnvme_lsreq->rqstaddr,
pnvme_lsreq, gen_req_cmp, ndlp, 2,
pnvme_lsreq->timeout, 0);
if (ret != WQE_SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6052 NVMEx REQ: EXIT. issue ls wqe failed "
"lsreq x%px Status %x DID %x\n",
pnvme_lsreq, ret, ndlp->nlp_DID);
lpfc_mbuf_free(vport->phba, bmp->virt, bmp->phys);
kfree(bmp);
return -EIO;
}
return 0;
}
/**
* lpfc_nvme_ls_req - Issue an NVME Link Service request
* @pnvme_lport: Transport localport that LS is to be issued from.
* @pnvme_rport: Transport remoteport that LS is to be sent to.
* @pnvme_lsreq: the transport nvme_ls_req structure for the LS
*
* Driver registers this routine to handle any link service request
* from the nvme_fc transport to a remote nvme-aware port.
*
* Return value :
* 0 - Success
* non-zero: various error codes, in form of -Exxx
**/
static int
lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
struct nvme_fc_remote_port *pnvme_rport,
struct nvmefc_ls_req *pnvme_lsreq)
{
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_rport *rport;
struct lpfc_vport *vport;
int ret;
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
if (unlikely(!lport) || unlikely(!rport))
return -EINVAL;
vport = lport->vport;
if (vport->load_flag & FC_UNLOADING)
return -ENODEV;
atomic_inc(&lport->fc4NvmeLsRequests);
ret = __lpfc_nvme_ls_req(vport, rport->ndlp, pnvme_lsreq,
lpfc_nvme_ls_req_cmp);
if (ret)
atomic_inc(&lport->xmt_ls_err);
return ret;
}
/**
* __lpfc_nvme_ls_abort - Generic service routine to abort a prior
* NVME LS request
* @vport: The local port that issued the LS
* @ndlp: The remote port the LS was sent to
* @pnvme_lsreq: Pointer to LS request structure from the transport
*
* The driver validates the ndlp, looks for the LS, and aborts the
* LS if found.
*
* Returns:
* 0 : if LS found and aborted
* non-zero: various error conditions in form -Exxx
**/
int
__lpfc_nvme_ls_abort(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct nvmefc_ls_req *pnvme_lsreq)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *wqe, *next_wqe;
bool foundit = false;
if (!ndlp) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6049 NVMEx LS REQ Abort: Bad NDLP x%px DID "
"x%06x, Failing LS Req\n",
ndlp, ndlp ? ndlp->nlp_DID : 0);
return -EINVAL;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC | LOG_NVME_ABTS,
"6040 NVMEx LS REQ Abort: Issue LS_ABORT for lsreq "
"x%px rqstlen:%d rsplen:%d %pad %pad\n",
pnvme_lsreq, pnvme_lsreq->rqstlen,
pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
&pnvme_lsreq->rspdma);
/*
* Lock the ELS ring txcmplq and look for the wqe that matches
* this ELS. If found, issue an abort on the wqe.
*/
pring = phba->sli4_hba.nvmels_wq->pring;
spin_lock_irq(&phba->hbalock);
spin_lock(&pring->ring_lock);
list_for_each_entry_safe(wqe, next_wqe, &pring->txcmplq, list) {
if (wqe->context2 == pnvme_lsreq) {
wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
foundit = true;
break;
}
}
spin_unlock(&pring->ring_lock);
if (foundit)
lpfc_sli_issue_abort_iotag(phba, pring, wqe, NULL);
spin_unlock_irq(&phba->hbalock);
if (foundit)
return 0;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC | LOG_NVME_ABTS,
"6213 NVMEx LS REQ Abort: Unable to locate req x%px\n",
pnvme_lsreq);
return -EINVAL;
}
static int
lpfc_nvme_xmt_ls_rsp(struct nvme_fc_local_port *localport,
struct nvme_fc_remote_port *remoteport,
struct nvmefc_ls_rsp *ls_rsp)
{
struct lpfc_async_xchg_ctx *axchg =
container_of(ls_rsp, struct lpfc_async_xchg_ctx, ls_rsp);
struct lpfc_nvme_lport *lport;
int rc;
if (axchg->phba->pport->load_flag & FC_UNLOADING)
return -ENODEV;
lport = (struct lpfc_nvme_lport *)localport->private;
rc = __lpfc_nvme_xmt_ls_rsp(axchg, ls_rsp, __lpfc_nvme_xmt_ls_rsp_cmp);
if (rc) {
/*
* unless the failure is due to having already sent
* the response, an abort will be generated for the
* exchange if the rsp can't be sent.
*/
if (rc != -EALREADY)
atomic_inc(&lport->xmt_ls_abort);
return rc;
}
return 0;
}
/**
* lpfc_nvme_ls_abort - Abort a prior NVME LS request
* @pnvme_lport: Transport localport that LS is to be issued from.
* @pnvme_rport: Transport remoteport that LS is to be sent to.
* @pnvme_lsreq: the transport nvme_ls_req structure for the LS
*
* Driver registers this routine to abort a NVME LS request that is
* in progress (from the transports perspective).
**/
static void
lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
struct nvme_fc_remote_port *pnvme_rport,
struct nvmefc_ls_req *pnvme_lsreq)
{
struct lpfc_nvme_lport *lport;
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
int ret;
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
if (unlikely(!lport))
return;
vport = lport->vport;
if (vport->load_flag & FC_UNLOADING)
return;
ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
ret = __lpfc_nvme_ls_abort(vport, ndlp, pnvme_lsreq);
if (!ret)
atomic_inc(&lport->xmt_ls_abort);
}
/* Fix up the existing sgls for NVME IO. */
static inline void
lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
struct lpfc_io_buf *lpfc_ncmd,
struct nvmefc_fcp_req *nCmd)
{
struct lpfc_hba *phba = vport->phba;
struct sli4_sge *sgl;
union lpfc_wqe128 *wqe;
uint32_t *wptr, *dptr;
/*
* Get a local pointer to the built-in wqe and correct
* the cmd size to match NVME's 96 bytes and fix
* the dma address.
*/
wqe = &lpfc_ncmd->cur_iocbq.wqe;
/*
* Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to
* match NVME. NVME sends 96 bytes. Also, use the
* nvme commands command and response dma addresses
* rather than the virtual memory to ease the restore
* operation.
*/
sgl = lpfc_ncmd->dma_sgl;
sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
if (phba->cfg_nvme_embed_cmd) {
sgl->addr_hi = 0;
sgl->addr_lo = 0;
/* Word 0-2 - NVME CMND IU (embedded payload) */
wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
wqe->generic.bde.tus.f.bdeSize = 56;
wqe->generic.bde.addrHigh = 0;
wqe->generic.bde.addrLow = 64; /* Word 16 */
/* Word 10 - dbde is 0, wqes is 1 in template */
/*
* Embed the payload in the last half of the WQE
* WQE words 16-30 get the NVME CMD IU payload
*
* WQE words 16-19 get payload Words 1-4
* WQE words 20-21 get payload Words 6-7
* WQE words 22-29 get payload Words 16-23
*/
wptr = &wqe->words[16]; /* WQE ptr */
dptr = (uint32_t *)nCmd->cmdaddr; /* payload ptr */
dptr++; /* Skip Word 0 in payload */
*wptr++ = *dptr++; /* Word 1 */
*wptr++ = *dptr++; /* Word 2 */
*wptr++ = *dptr++; /* Word 3 */
*wptr++ = *dptr++; /* Word 4 */
dptr++; /* Skip Word 5 in payload */
*wptr++ = *dptr++; /* Word 6 */
*wptr++ = *dptr++; /* Word 7 */
dptr += 8; /* Skip Words 8-15 in payload */
*wptr++ = *dptr++; /* Word 16 */
*wptr++ = *dptr++; /* Word 17 */
*wptr++ = *dptr++; /* Word 18 */
*wptr++ = *dptr++; /* Word 19 */
*wptr++ = *dptr++; /* Word 20 */
*wptr++ = *dptr++; /* Word 21 */
*wptr++ = *dptr++; /* Word 22 */
*wptr = *dptr; /* Word 23 */
} else {
sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->cmddma));
sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->cmddma));
/* Word 0-2 - NVME CMND IU Inline BDE */
wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
wqe->generic.bde.tus.f.bdeSize = nCmd->cmdlen;
wqe->generic.bde.addrHigh = sgl->addr_hi;
wqe->generic.bde.addrLow = sgl->addr_lo;
/* Word 10 */
bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
bf_set(wqe_wqes, &wqe->generic.wqe_com, 0);
}
sgl++;
/* Setup the physical region for the FCP RSP */
sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->rspdma));
sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->rspdma));
sgl->word2 = le32_to_cpu(sgl->word2);
if (nCmd->sg_cnt)
bf_set(lpfc_sli4_sge_last, sgl, 0);
else
bf_set(lpfc_sli4_sge_last, sgl, 1);
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(nCmd->rsplen);
}
/*
* lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO
*
* Driver registers this routine as it io request handler. This
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
* data structure to the rport indicated in @lpfc_nvme_rport.
*
* Return value :
* 0 - Success
* TODO: What are the failure codes.
**/
static void
lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
struct lpfc_wcqe_complete *wcqe)
{
struct lpfc_io_buf *lpfc_ncmd =
(struct lpfc_io_buf *)pwqeIn->context1;
struct lpfc_vport *vport = pwqeIn->vport;
struct nvmefc_fcp_req *nCmd;
struct nvme_fc_ersp_iu *ep;
struct nvme_fc_cmd_iu *cp;
struct lpfc_nodelist *ndlp;
struct lpfc_nvme_fcpreq_priv *freqpriv;
struct lpfc_nvme_lport *lport;
uint32_t code, status, idx;
uint16_t cid, sqhd, data;
uint32_t *ptr;
uint32_t lat;
bool call_done = false;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
int cpu;
#endif
int offline = 0;
/* Sanity check on return of outstanding command */
if (!lpfc_ncmd) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6071 Null lpfc_ncmd pointer. No "
"release, skip completion\n");
return;
}
/* Guard against abort handler being called at same time */
spin_lock(&lpfc_ncmd->buf_lock);
if (!lpfc_ncmd->nvmeCmd) {
spin_unlock(&lpfc_ncmd->buf_lock);
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6066 Missing cmpl ptrs: lpfc_ncmd x%px, "
"nvmeCmd x%px\n",
lpfc_ncmd, lpfc_ncmd->nvmeCmd);
/* Release the lpfc_ncmd regardless of the missing elements. */
lpfc_release_nvme_buf(phba, lpfc_ncmd);
return;
}
nCmd = lpfc_ncmd->nvmeCmd;
status = bf_get(lpfc_wcqe_c_status, wcqe);
idx = lpfc_ncmd->cur_iocbq.hba_wqidx;
phba->sli4_hba.hdwq[idx].nvme_cstat.io_cmpls++;
if (unlikely(status && vport->localport)) {
lport = (struct lpfc_nvme_lport *)vport->localport->private;
if (lport) {
if (bf_get(lpfc_wcqe_c_xb, wcqe))
atomic_inc(&lport->cmpl_fcp_xb);
atomic_inc(&lport->cmpl_fcp_err);
}
}
lpfc_nvmeio_data(phba, "NVME FCP CMPL: xri x%x stat x%x parm x%x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag,
status, wcqe->parameter);
/*
* Catch race where our node has transitioned, but the
* transport is still transitioning.
*/
ndlp = lpfc_ncmd->ndlp;
if (!ndlp) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6062 Ignoring NVME cmpl. No ndlp\n");
goto out_err;
}
code = bf_get(lpfc_wcqe_c_code, wcqe);
if (code == CQE_CODE_NVME_ERSP) {
/* For this type of CQE, we need to rebuild the rsp */
ep = (struct nvme_fc_ersp_iu *)nCmd->rspaddr;
/*
* Get Command Id from cmd to plug into response. This
* code is not needed in the next NVME Transport drop.
*/
cp = (struct nvme_fc_cmd_iu *)nCmd->cmdaddr;
cid = cp->sqe.common.command_id;
/*
* RSN is in CQE word 2
* SQHD is in CQE Word 3 bits 15:0
* Cmd Specific info is in CQE Word 1
* and in CQE Word 0 bits 15:0
*/
sqhd = bf_get(lpfc_wcqe_c_sqhead, wcqe);
/* Now lets build the NVME ERSP IU */
ep->iu_len = cpu_to_be16(8);
ep->rsn = wcqe->parameter;
ep->xfrd_len = cpu_to_be32(nCmd->payload_length);
ep->rsvd12 = 0;
ptr = (uint32_t *)&ep->cqe.result.u64;
*ptr++ = wcqe->total_data_placed;
data = bf_get(lpfc_wcqe_c_ersp0, wcqe);
*ptr = (uint32_t)data;
ep->cqe.sq_head = sqhd;
ep->cqe.sq_id = nCmd->sqid;
ep->cqe.command_id = cid;
ep->cqe.status = 0;
lpfc_ncmd->status = IOSTAT_SUCCESS;
lpfc_ncmd->result = 0;
nCmd->rcv_rsplen = LPFC_NVME_ERSP_LEN;
nCmd->transferred_length = nCmd->payload_length;
} else {
lpfc_ncmd->status = (status & LPFC_IOCB_STATUS_MASK);
lpfc_ncmd->result = (wcqe->parameter & IOERR_PARAM_MASK);
/* For NVME, the only failure path that results in an
* IO error is when the adapter rejects it. All other
* conditions are a success case and resolved by the
* transport.
* IOSTAT_FCP_RSP_ERROR means:
* 1. Length of data received doesn't match total
* transfer length in WQE
* 2. If the RSP payload does NOT match these cases:
* a. RSP length 12/24 bytes and all zeros
* b. NVME ERSP
*/
switch (lpfc_ncmd->status) {
case IOSTAT_SUCCESS:
nCmd->transferred_length = wcqe->total_data_placed;
nCmd->rcv_rsplen = 0;
nCmd->status = 0;
break;
case IOSTAT_FCP_RSP_ERROR:
nCmd->transferred_length = wcqe->total_data_placed;
nCmd->rcv_rsplen = wcqe->parameter;
nCmd->status = 0;
/* Check if this is really an ERSP */
if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN) {
lpfc_ncmd->status = IOSTAT_SUCCESS;
lpfc_ncmd->result = 0;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
"6084 NVME Completion ERSP: "
"xri %x placed x%x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag,
wcqe->total_data_placed);
break;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6081 NVME Completion Protocol Error: "
"xri %x status x%x result x%x "
"placed x%x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag,
lpfc_ncmd->status, lpfc_ncmd->result,
wcqe->total_data_placed);
break;
case IOSTAT_LOCAL_REJECT:
/* Let fall through to set command final state. */
if (lpfc_ncmd->result == IOERR_ABORT_REQUESTED)
lpfc_printf_vlog(vport, KERN_INFO,
LOG_NVME_IOERR,
"6032 Delay Aborted cmd x%px "
"nvme cmd x%px, xri x%x, "
"xb %d\n",
lpfc_ncmd, nCmd,
lpfc_ncmd->cur_iocbq.sli4_xritag,
bf_get(lpfc_wcqe_c_xb, wcqe));
fallthrough;
default:
out_err:
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6072 NVME Completion Error: xri %x "
"status x%x result x%x [x%x] "
"placed x%x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag,
lpfc_ncmd->status, lpfc_ncmd->result,
wcqe->parameter,
wcqe->total_data_placed);
nCmd->transferred_length = 0;
nCmd->rcv_rsplen = 0;
nCmd->status = NVME_SC_INTERNAL;
offline = pci_channel_offline(vport->phba->pcidev);
}
}
/* pick up SLI4 exhange busy condition */
if (bf_get(lpfc_wcqe_c_xb, wcqe) && !offline)
lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
else
lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
/* Update stats and complete the IO. There is
* no need for dma unprep because the nvme_transport
* owns the dma address.
*/
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
if (lpfc_ncmd->ts_cmd_start) {
lpfc_ncmd->ts_isr_cmpl = pwqeIn->isr_timestamp;
lpfc_ncmd->ts_data_io = ktime_get_ns();
phba->ktime_last_cmd = lpfc_ncmd->ts_data_io;
lpfc_io_ktime(phba, lpfc_ncmd);
}
if (unlikely(phba->hdwqstat_on & LPFC_CHECK_NVME_IO)) {
cpu = raw_smp_processor_id();
this_cpu_inc(phba->sli4_hba.c_stat->cmpl_io);
if (lpfc_ncmd->cpu != cpu)
lpfc_printf_vlog(vport,
KERN_INFO, LOG_NVME_IOERR,
"6701 CPU Check cmpl: "
"cpu %d expect %d\n",
cpu, lpfc_ncmd->cpu);
}
#endif
/* NVME targets need completion held off until the abort exchange
* completes unless the NVME Rport is getting unregistered.
*/
if (!(lpfc_ncmd->flags & LPFC_SBUF_XBUSY)) {
freqpriv = nCmd->private;
freqpriv->nvme_buf = NULL;
lpfc_ncmd->nvmeCmd = NULL;
call_done = true;
}
spin_unlock(&lpfc_ncmd->buf_lock);
/* Check if IO qualified for CMF */
if (phba->cmf_active_mode != LPFC_CFG_OFF &&
nCmd->io_dir == NVMEFC_FCP_READ &&
nCmd->payload_length) {
/* Used when calculating average latency */
lat = ktime_get_ns() - lpfc_ncmd->rx_cmd_start;
lpfc_update_cmf_cmpl(phba, lat, nCmd->payload_length, NULL);
}
if (call_done)
nCmd->done(nCmd);
/* Call release with XB=1 to queue the IO into the abort list. */
lpfc_release_nvme_buf(phba, lpfc_ncmd);
}
/**
* lpfc_nvme_prep_io_cmd - Issue an NVME-over-FCP IO
* @vport: pointer to a host virtual N_Port data structure
* @lpfc_ncmd: Pointer to lpfc scsi command
* @pnode: pointer to a node-list data structure
* @cstat: pointer to the control status structure
*
* Driver registers this routine as it io request handler. This
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
* data structure to the rport indicated in @lpfc_nvme_rport.
*
* Return value :
* 0 - Success
* TODO: What are the failure codes.
**/
static int
lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
struct lpfc_io_buf *lpfc_ncmd,
struct lpfc_nodelist *pnode,
struct lpfc_fc4_ctrl_stat *cstat)
{
struct lpfc_hba *phba = vport->phba;
struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq);
union lpfc_wqe128 *wqe = &pwqeq->wqe;
uint32_t req_len;
/*
* There are three possibilities here - use scatter-gather segment, use
* the single mapping, or neither.
*/
if (nCmd->sg_cnt) {
if (nCmd->io_dir == NVMEFC_FCP_WRITE) {
/* From the iwrite template, initialize words 7 - 11 */
memcpy(&wqe->words[7],
&lpfc_iwrite_cmd_template.words[7],
sizeof(uint32_t) * 5);
/* Word 4 */
wqe->fcp_iwrite.total_xfer_len = nCmd->payload_length;
/* Word 5 */
if ((phba->cfg_nvme_enable_fb) &&
(pnode->nlp_flag & NLP_FIRSTBURST)) {
req_len = lpfc_ncmd->nvmeCmd->payload_length;
if (req_len < pnode->nvme_fb_size)
wqe->fcp_iwrite.initial_xfer_len =
req_len;
else
wqe->fcp_iwrite.initial_xfer_len =
pnode->nvme_fb_size;
} else {
wqe->fcp_iwrite.initial_xfer_len = 0;
}
cstat->output_requests++;
} else {
/* From the iread template, initialize words 7 - 11 */
memcpy(&wqe->words[7],
&lpfc_iread_cmd_template.words[7],
sizeof(uint32_t) * 5);
/* Word 4 */
wqe->fcp_iread.total_xfer_len = nCmd->payload_length;
/* Word 5 */
wqe->fcp_iread.rsrvd5 = 0;
/* For a CMF Managed port, iod must be zero'ed */
if (phba->cmf_active_mode == LPFC_CFG_MANAGED)
bf_set(wqe_iod, &wqe->fcp_iread.wqe_com,
LPFC_WQE_IOD_NONE);
cstat->input_requests++;
}
} else {
/* From the icmnd template, initialize words 4 - 11 */
memcpy(&wqe->words[4], &lpfc_icmnd_cmd_template.words[4],
sizeof(uint32_t) * 8);
cstat->control_requests++;
}
if (pnode->nlp_nvme_info & NLP_NVME_NSLER)
bf_set(wqe_erp, &wqe->generic.wqe_com, 1);
/*
* Finish initializing those WQE fields that are independent
* of the nvme_cmnd request_buffer
*/
/* Word 3 */
bf_set(payload_offset_len, &wqe->fcp_icmd,
(nCmd->rsplen + nCmd->cmdlen));
/* Word 6 */
bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,
phba->sli4_hba.rpi_ids[pnode->nlp_rpi]);
bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag);
/* Word 8 */
wqe->generic.wqe_com.abort_tag = pwqeq->iotag;
/* Word 9 */
bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag);
/* Word 10 */
bf_set(wqe_xchg, &wqe->fcp_iwrite.wqe_com, LPFC_NVME_XCHG);
/* Words 13 14 15 are for PBDE support */
pwqeq->vport = vport;
return 0;
}
/**
* lpfc_nvme_prep_io_dma - Issue an NVME-over-FCP IO
* @vport: pointer to a host virtual N_Port data structure
* @lpfc_ncmd: Pointer to lpfc scsi command
*
* Driver registers this routine as it io request handler. This
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
* data structure to the rport indicated in @lpfc_nvme_rport.
*
* Return value :
* 0 - Success
* TODO: What are the failure codes.
**/
static int
lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
struct lpfc_io_buf *lpfc_ncmd)
{
struct lpfc_hba *phba = vport->phba;
struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
union lpfc_wqe128 *wqe = &lpfc_ncmd->cur_iocbq.wqe;
struct sli4_sge *sgl = lpfc_ncmd->dma_sgl;
struct sli4_hybrid_sgl *sgl_xtra = NULL;
struct scatterlist *data_sg;
struct sli4_sge *first_data_sgl;
struct ulp_bde64 *bde;
dma_addr_t physaddr = 0;
uint32_t num_bde = 0;
uint32_t dma_len = 0;
uint32_t dma_offset = 0;
int nseg, i, j;
bool lsp_just_set = false;
/* Fix up the command and response DMA stuff. */
lpfc_nvme_adj_fcp_sgls(vport, lpfc_ncmd, nCmd);
/*
* There are three possibilities here - use scatter-gather segment, use
* the single mapping, or neither.
*/
if (nCmd->sg_cnt) {
/*
* Jump over the cmd and rsp SGEs. The fix routine
* has already adjusted for this.
*/
sgl += 2;
first_data_sgl = sgl;
lpfc_ncmd->seg_cnt = nCmd->sg_cnt;
if (lpfc_ncmd->seg_cnt > lpfc_nvme_template.max_sgl_segments) {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"6058 Too many sg segments from "
"NVME Transport. Max %d, "
"nvmeIO sg_cnt %d\n",
phba->cfg_nvme_seg_cnt + 1,
lpfc_ncmd->seg_cnt);
lpfc_ncmd->seg_cnt = 0;
return 1;
}
/*
* The driver established a maximum scatter-gather segment count
* during probe that limits the number of sg elements in any
* single nvme command. Just run through the seg_cnt and format
* the sge's.
*/
nseg = nCmd->sg_cnt;
data_sg = nCmd->first_sgl;
/* for tracking the segment boundaries */
j = 2;
for (i = 0; i < nseg; i++) {
if (data_sg == NULL) {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"6059 dptr err %d, nseg %d\n",
i, nseg);
lpfc_ncmd->seg_cnt = 0;
return 1;
}
sgl->word2 = 0;
if ((num_bde + 1) == nseg) {
bf_set(lpfc_sli4_sge_last, sgl, 1);
bf_set(lpfc_sli4_sge_type, sgl,
LPFC_SGE_TYPE_DATA);
} else {
bf_set(lpfc_sli4_sge_last, sgl, 0);
/* expand the segment */
if (!lsp_just_set &&
!((j + 1) % phba->border_sge_num) &&
((nseg - 1) != i)) {
/* set LSP type */
bf_set(lpfc_sli4_sge_type, sgl,
LPFC_SGE_TYPE_LSP);
sgl_xtra = lpfc_get_sgl_per_hdwq(
phba, lpfc_ncmd);
if (unlikely(!sgl_xtra)) {
lpfc_ncmd->seg_cnt = 0;
return 1;
}
sgl->addr_lo = cpu_to_le32(putPaddrLow(
sgl_xtra->dma_phys_sgl));
sgl->addr_hi = cpu_to_le32(putPaddrHigh(
sgl_xtra->dma_phys_sgl));
} else {
bf_set(lpfc_sli4_sge_type, sgl,
LPFC_SGE_TYPE_DATA);
}
}
if (!(bf_get(lpfc_sli4_sge_type, sgl) &
LPFC_SGE_TYPE_LSP)) {
if ((nseg - 1) == i)
bf_set(lpfc_sli4_sge_last, sgl, 1);
physaddr = data_sg->dma_address;
dma_len = data_sg->length;
sgl->addr_lo = cpu_to_le32(
putPaddrLow(physaddr));
sgl->addr_hi = cpu_to_le32(
putPaddrHigh(physaddr));
bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(dma_len);
dma_offset += dma_len;
data_sg = sg_next(data_sg);
sgl++;
lsp_just_set = false;
} else {
sgl->word2 = cpu_to_le32(sgl->word2);
sgl->sge_len = cpu_to_le32(
phba->cfg_sg_dma_buf_size);
sgl = (struct sli4_sge *)sgl_xtra->dma_sgl;
i = i - 1;
lsp_just_set = true;
}
j++;
}
if (phba->cfg_enable_pbde) {
/* Use PBDE support for first SGL only, offset == 0 */
/* Words 13-15 */
bde = (struct ulp_bde64 *)
&wqe->words[13];
bde->addrLow = first_data_sgl->addr_lo;
bde->addrHigh = first_data_sgl->addr_hi;
bde->tus.f.bdeSize =
le32_to_cpu(first_data_sgl->sge_len);
bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bde->tus.w = cpu_to_le32(bde->tus.w);
/* Word 11 */
bf_set(wqe_pbde, &wqe->generic.wqe_com, 1);
} else {
memset(&wqe->words[13], 0, (sizeof(uint32_t) * 3));
bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
}
} else {
lpfc_ncmd->seg_cnt = 0;
/* For this clause to be valid, the payload_length
* and sg_cnt must zero.
*/
if (nCmd->payload_length != 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"6063 NVME DMA Prep Err: sg_cnt %d "
"payload_length x%x\n",
nCmd->sg_cnt, nCmd->payload_length);
return 1;
}
}
return 0;
}
/**
* lpfc_nvme_fcp_io_submit - Issue an NVME-over-FCP IO
* @pnvme_lport: Pointer to the driver's local port data
* @pnvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
* @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
* @pnvme_fcreq: IO request from nvme fc to driver.
*
* Driver registers this routine as it io request handler. This
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
* data structure to the rport indicated in @lpfc_nvme_rport.
*
* Return value :
* 0 - Success
* TODO: What are the failure codes.
**/
static int
lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
struct nvme_fc_remote_port *pnvme_rport,
void *hw_queue_handle,
struct nvmefc_fcp_req *pnvme_fcreq)
{
int ret = 0;
int expedite = 0;
int idx, cpu;
struct lpfc_nvme_lport *lport;
struct lpfc_fc4_ctrl_stat *cstat;
struct lpfc_vport *vport;
struct lpfc_hba *phba;
struct lpfc_nodelist *ndlp;
struct lpfc_io_buf *lpfc_ncmd;
struct lpfc_nvme_rport *rport;
struct lpfc_nvme_qhandle *lpfc_queue_info;
struct lpfc_nvme_fcpreq_priv *freqpriv;
struct nvme_common_command *sqe;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint64_t start = 0;
#endif
/* Validate pointers. LLDD fault handling with transport does
* have timing races.
*/
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
if (unlikely(!lport)) {
ret = -EINVAL;
goto out_fail;
}
vport = lport->vport;
if (unlikely(!hw_queue_handle)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6117 Fail IO, NULL hw_queue_handle\n");
atomic_inc(&lport->xmt_fcp_err);
ret = -EBUSY;
goto out_fail;
}
phba = vport->phba;
if (unlikely(vport->load_flag & FC_UNLOADING)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6124 Fail IO, Driver unload\n");
atomic_inc(&lport->xmt_fcp_err);
ret = -ENODEV;
goto out_fail;
}
freqpriv = pnvme_fcreq->private;
if (unlikely(!freqpriv)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6158 Fail IO, NULL request data\n");
atomic_inc(&lport->xmt_fcp_err);
ret = -EINVAL;
goto out_fail;
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
if (phba->ktime_on)
start = ktime_get_ns();
#endif
rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
lpfc_queue_info = (struct lpfc_nvme_qhandle *)hw_queue_handle;
/*
* Catch race where our node has transitioned, but the
* transport is still transitioning.
*/
ndlp = rport->ndlp;
if (!ndlp) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_NVME_IOERR,
"6053 Busy IO, ndlp not ready: rport x%px "
"ndlp x%px, DID x%06x\n",
rport, ndlp, pnvme_rport->port_id);
atomic_inc(&lport->xmt_fcp_err);
ret = -EBUSY;
goto out_fail;
}
/* The remote node has to be a mapped target or it's an error. */
if ((ndlp->nlp_type & NLP_NVME_TARGET) &&
(ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_NVME_IOERR,
"6036 Fail IO, DID x%06x not ready for "
"IO. State x%x, Type x%x Flg x%x\n",
pnvme_rport->port_id,
ndlp->nlp_state, ndlp->nlp_type,
ndlp->fc4_xpt_flags);
atomic_inc(&lport->xmt_fcp_bad_ndlp);
ret = -EBUSY;
goto out_fail;
}
/* Currently only NVME Keep alive commands should be expedited
* if the driver runs out of a resource. These should only be
* issued on the admin queue, qidx 0
*/
if (!lpfc_queue_info->qidx && !pnvme_fcreq->sg_cnt) {
sqe = &((struct nvme_fc_cmd_iu *)
pnvme_fcreq->cmdaddr)->sqe.common;
if (sqe->opcode == nvme_admin_keep_alive)
expedite = 1;
}
/* Check if IO qualifies for CMF */
if (phba->cmf_active_mode != LPFC_CFG_OFF &&
pnvme_fcreq->io_dir == NVMEFC_FCP_READ &&
pnvme_fcreq->payload_length) {
ret = lpfc_update_cmf_cmd(phba, pnvme_fcreq->payload_length);
if (ret) {
ret = -EBUSY;
goto out_fail;
}
/* Get start time for IO latency */
start = ktime_get_ns();
}
/* The node is shared with FCP IO, make sure the IO pending count does
* not exceed the programmed depth.
*/
if (lpfc_ndlp_check_qdepth(phba, ndlp)) {
if ((atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) &&
!expedite) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6174 Fail IO, ndlp qdepth exceeded: "
"idx %d DID %x pend %d qdepth %d\n",
lpfc_queue_info->index, ndlp->nlp_DID,
atomic_read(&ndlp->cmd_pending),
ndlp->cmd_qdepth);
atomic_inc(&lport->xmt_fcp_qdepth);
ret = -EBUSY;
goto out_fail1;
}
}
/* Lookup Hardware Queue index based on fcp_io_sched module parameter */
if (phba->cfg_fcp_io_sched == LPFC_FCP_SCHED_BY_HDWQ) {
idx = lpfc_queue_info->index;
} else {
cpu = raw_smp_processor_id();
idx = phba->sli4_hba.cpu_map[cpu].hdwq;
}
lpfc_ncmd = lpfc_get_nvme_buf(phba, ndlp, idx, expedite);
if (lpfc_ncmd == NULL) {
atomic_inc(&lport->xmt_fcp_noxri);
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6065 Fail IO, driver buffer pool is empty: "
"idx %d DID %x\n",
lpfc_queue_info->index, ndlp->nlp_DID);
ret = -EBUSY;
goto out_fail1;
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
if (start) {
lpfc_ncmd->ts_cmd_start = start;
lpfc_ncmd->ts_last_cmd = phba->ktime_last_cmd;
} else {
lpfc_ncmd->ts_cmd_start = 0;
}
#endif
lpfc_ncmd->rx_cmd_start = start;
/*
* Store the data needed by the driver to issue, abort, and complete
* an IO.
* Do not let the IO hang out forever. There is no midlayer issuing
* an abort so inform the FW of the maximum IO pending time.
*/
freqpriv->nvme_buf = lpfc_ncmd;
lpfc_ncmd->nvmeCmd = pnvme_fcreq;
lpfc_ncmd->ndlp = ndlp;
lpfc_ncmd->qidx = lpfc_queue_info->qidx;
/*
* Issue the IO on the WQ indicated by index in the hw_queue_handle.
* This identfier was create in our hardware queue create callback
* routine. The driver now is dependent on the IO queue steering from
* the transport. We are trusting the upper NVME layers know which
* index to use and that they have affinitized a CPU to this hardware
* queue. A hardware queue maps to a driver MSI-X vector/EQ/CQ/WQ.
*/
lpfc_ncmd->cur_iocbq.hba_wqidx = idx;
cstat = &phba->sli4_hba.hdwq[idx].nvme_cstat;
lpfc_nvme_prep_io_cmd(vport, lpfc_ncmd, ndlp, cstat);
ret = lpfc_nvme_prep_io_dma(vport, lpfc_ncmd);
if (ret) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6175 Fail IO, Prep DMA: "
"idx %d DID %x\n",
lpfc_queue_info->index, ndlp->nlp_DID);
atomic_inc(&lport->xmt_fcp_err);
ret = -ENOMEM;
goto out_free_nvme_buf;
}
lpfc_nvmeio_data(phba, "NVME FCP XMIT: xri x%x idx %d to %06x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag,
lpfc_queue_info->index, ndlp->nlp_DID);
ret = lpfc_sli4_issue_wqe(phba, lpfc_ncmd->hdwq, &lpfc_ncmd->cur_iocbq);
if (ret) {
atomic_inc(&lport->xmt_fcp_wqerr);
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6113 Fail IO, Could not issue WQE err %x "
"sid: x%x did: x%x oxid: x%x\n",
ret, vport->fc_myDID, ndlp->nlp_DID,
lpfc_ncmd->cur_iocbq.sli4_xritag);
goto out_free_nvme_buf;
}
if (phba->cfg_xri_rebalancing)
lpfc_keep_pvt_pool_above_lowwm(phba, lpfc_ncmd->hdwq_no);
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
if (lpfc_ncmd->ts_cmd_start)
lpfc_ncmd->ts_cmd_wqput = ktime_get_ns();
if (phba->hdwqstat_on & LPFC_CHECK_NVME_IO) {
cpu = raw_smp_processor_id();
this_cpu_inc(phba->sli4_hba.c_stat->xmt_io);
lpfc_ncmd->cpu = cpu;
if (idx != cpu)
lpfc_printf_vlog(vport,
KERN_INFO, LOG_NVME_IOERR,
"6702 CPU Check cmd: "
"cpu %d wq %d\n",
lpfc_ncmd->cpu,
lpfc_queue_info->index);
}
#endif
return 0;
out_free_nvme_buf:
if (lpfc_ncmd->nvmeCmd->sg_cnt) {
if (lpfc_ncmd->nvmeCmd->io_dir == NVMEFC_FCP_WRITE)
cstat->output_requests--;
else
cstat->input_requests--;
} else
cstat->control_requests--;
lpfc_release_nvme_buf(phba, lpfc_ncmd);
out_fail1:
lpfc_update_cmf_cmpl(phba, LPFC_CGN_NOT_SENT,
pnvme_fcreq->payload_length, NULL);
out_fail:
return ret;
}
/**
* lpfc_nvme_abort_fcreq_cmpl - Complete an NVME FCP abort request.
* @phba: Pointer to HBA context object
* @cmdiocb: Pointer to command iocb object.
* @abts_cmpl: Pointer to wcqe complete object.
*
* This is the callback function for any NVME FCP IO that was aborted.
*
* Return value:
* None
**/
void
lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_wcqe_complete *abts_cmpl)
{
lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
"6145 ABORT_XRI_CN completing on rpi x%x "
"original iotag x%x, abort cmd iotag x%x "
"req_tag x%x, status x%x, hwstatus x%x\n",
cmdiocb->iocb.un.acxri.abortContextTag,
cmdiocb->iocb.un.acxri.abortIoTag,
cmdiocb->iotag,
bf_get(lpfc_wcqe_c_request_tag, abts_cmpl),
bf_get(lpfc_wcqe_c_status, abts_cmpl),
bf_get(lpfc_wcqe_c_hw_status, abts_cmpl));
lpfc_sli_release_iocbq(phba, cmdiocb);
}
/**
* lpfc_nvme_fcp_abort - Issue an NVME-over-FCP ABTS
* @pnvme_lport: Pointer to the driver's local port data
* @pnvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
* @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
* @pnvme_fcreq: IO request from nvme fc to driver.
*
* Driver registers this routine as its nvme request io abort handler. This
* routine issues an fcp Abort WQE with data from the @lpfc_nvme_fcpreq
* data structure to the rport indicated in @lpfc_nvme_rport. This routine
* is executed asynchronously - one the target is validated as "MAPPED" and
* ready for IO, the driver issues the abort request and returns.
*
* Return value:
* None
**/
static void
lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
struct nvme_fc_remote_port *pnvme_rport,
void *hw_queue_handle,
struct nvmefc_fcp_req *pnvme_fcreq)
{
struct lpfc_nvme_lport *lport;
struct lpfc_vport *vport;
struct lpfc_hba *phba;
struct lpfc_io_buf *lpfc_nbuf;
struct lpfc_iocbq *nvmereq_wqe;
struct lpfc_nvme_fcpreq_priv *freqpriv;
unsigned long flags;
int ret_val;
/* Validate pointers. LLDD fault handling with transport does
* have timing races.
*/
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
if (unlikely(!lport))
return;
vport = lport->vport;
if (unlikely(!hw_queue_handle)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
"6129 Fail Abort, HW Queue Handle NULL.\n");
return;
}
phba = vport->phba;
freqpriv = pnvme_fcreq->private;
if (unlikely(!freqpriv))
return;
if (vport->load_flag & FC_UNLOADING)
return;
/* Announce entry to new IO submit field. */
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
"6002 Abort Request to rport DID x%06x "
"for nvme_fc_req x%px\n",
pnvme_rport->port_id,
pnvme_fcreq);
/* If the hba is getting reset, this flag is set. It is
* cleared when the reset is complete and rings reestablished.
*/
spin_lock_irqsave(&phba->hbalock, flags);
/* driver queued commands are in process of being flushed */
if (phba->hba_flag & HBA_IOQ_FLUSH) {
spin_unlock_irqrestore(&phba->hbalock, flags);
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6139 Driver in reset cleanup - flushing "
"NVME Req now. hba_flag x%x\n",
phba->hba_flag);
return;
}
lpfc_nbuf = freqpriv->nvme_buf;
if (!lpfc_nbuf) {
spin_unlock_irqrestore(&phba->hbalock, flags);
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6140 NVME IO req has no matching lpfc nvme "
"io buffer. Skipping abort req.\n");
return;
} else if (!lpfc_nbuf->nvmeCmd) {
spin_unlock_irqrestore(&phba->hbalock, flags);
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6141 lpfc NVME IO req has no nvme_fcreq "
"io buffer. Skipping abort req.\n");
return;
}
nvmereq_wqe = &lpfc_nbuf->cur_iocbq;
/* Guard against IO completion being called at same time */
spin_lock(&lpfc_nbuf->buf_lock);
/*
* The lpfc_nbuf and the mapped nvme_fcreq in the driver's
* state must match the nvme_fcreq passed by the nvme
* transport. If they don't match, it is likely the driver
* has already completed the NVME IO and the nvme transport
* has not seen it yet.
*/
if (lpfc_nbuf->nvmeCmd != pnvme_fcreq) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6143 NVME req mismatch: "
"lpfc_nbuf x%px nvmeCmd x%px, "
"pnvme_fcreq x%px. Skipping Abort xri x%x\n",
lpfc_nbuf, lpfc_nbuf->nvmeCmd,
pnvme_fcreq, nvmereq_wqe->sli4_xritag);
goto out_unlock;
}
/* Don't abort IOs no longer on the pending queue. */
if (!(nvmereq_wqe->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6142 NVME IO req x%px not queued - skipping "
"abort req xri x%x\n",
pnvme_fcreq, nvmereq_wqe->sli4_xritag);
goto out_unlock;
}
atomic_inc(&lport->xmt_fcp_abort);
lpfc_nvmeio_data(phba, "NVME FCP ABORT: xri x%x idx %d to %06x\n",
nvmereq_wqe->sli4_xritag,
nvmereq_wqe->hba_wqidx, pnvme_rport->port_id);
/* Outstanding abort is in progress */
if (nvmereq_wqe->iocb_flag & LPFC_DRIVER_ABORTED) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6144 Outstanding NVME I/O Abort Request "
"still pending on nvme_fcreq x%px, "
"lpfc_ncmd x%px xri x%x\n",
pnvme_fcreq, lpfc_nbuf,
nvmereq_wqe->sli4_xritag);
goto out_unlock;
}
ret_val = lpfc_sli4_issue_abort_iotag(phba, nvmereq_wqe,
lpfc_nvme_abort_fcreq_cmpl);
spin_unlock(&lpfc_nbuf->buf_lock);
spin_unlock_irqrestore(&phba->hbalock, flags);
/* Make sure HBA is alive */
lpfc_issue_hb_tmo(phba);
if (ret_val != WQE_SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6137 Failed abts issue_wqe with status x%x "
"for nvme_fcreq x%px.\n",
ret_val, pnvme_fcreq);
return;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
"6138 Transport Abort NVME Request Issued for "
"ox_id x%x\n",
nvmereq_wqe->sli4_xritag);
return;
out_unlock:
spin_unlock(&lpfc_nbuf->buf_lock);
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
/* Declare and initialization an instance of the FC NVME template. */
static struct nvme_fc_port_template lpfc_nvme_template = {
/* initiator-based functions */
.localport_delete = lpfc_nvme_localport_delete,
.remoteport_delete = lpfc_nvme_remoteport_delete,
.create_queue = lpfc_nvme_create_queue,
.delete_queue = lpfc_nvme_delete_queue,
.ls_req = lpfc_nvme_ls_req,
.fcp_io = lpfc_nvme_fcp_io_submit,
.ls_abort = lpfc_nvme_ls_abort,
.fcp_abort = lpfc_nvme_fcp_abort,
.xmt_ls_rsp = lpfc_nvme_xmt_ls_rsp,
.max_hw_queues = 1,
.max_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
.max_dif_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
.dma_boundary = 0xFFFFFFFF,
/* Sizes of additional private data for data structures.
* No use for the last two sizes at this time.
*/
.local_priv_sz = sizeof(struct lpfc_nvme_lport),
.remote_priv_sz = sizeof(struct lpfc_nvme_rport),
.lsrqst_priv_sz = 0,
.fcprqst_priv_sz = sizeof(struct lpfc_nvme_fcpreq_priv),
};
/*
* lpfc_get_nvme_buf - Get a nvme buffer from io_buf_list of the HBA
*
* This routine removes a nvme buffer from head of @hdwq io_buf_list
* and returns to caller.
*
* Return codes:
* NULL - Error
* Pointer to lpfc_nvme_buf - Success
**/
static struct lpfc_io_buf *
lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
int idx, int expedite)
{
struct lpfc_io_buf *lpfc_ncmd;
struct lpfc_sli4_hdw_queue *qp;
struct sli4_sge *sgl;
struct lpfc_iocbq *pwqeq;
union lpfc_wqe128 *wqe;
lpfc_ncmd = lpfc_get_io_buf(phba, NULL, idx, expedite);
if (lpfc_ncmd) {
pwqeq = &(lpfc_ncmd->cur_iocbq);
wqe = &pwqeq->wqe;
/* Setup key fields in buffer that may have been changed
* if other protocols used this buffer.
*/
pwqeq->iocb_flag = LPFC_IO_NVME;
pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
lpfc_ncmd->start_time = jiffies;
lpfc_ncmd->flags = 0;
/* Rsp SGE will be filled in when we rcv an IO
* from the NVME Layer to be sent.
* The cmd is going to be embedded so we need a SKIP SGE.
*/
sgl = lpfc_ncmd->dma_sgl;
bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP);
bf_set(lpfc_sli4_sge_last, sgl, 0);
sgl->word2 = cpu_to_le32(sgl->word2);
/* Fill in word 3 / sgl_len during cmd submission */
/* Initialize 64 bytes only */
memset(wqe, 0, sizeof(union lpfc_wqe));
if (lpfc_ndlp_check_qdepth(phba, ndlp)) {
atomic_inc(&ndlp->cmd_pending);
lpfc_ncmd->flags |= LPFC_SBUF_BUMP_QDEPTH;
}
} else {
qp = &phba->sli4_hba.hdwq[idx];
qp->empty_io_bufs++;
}
return lpfc_ncmd;
}
/**
* lpfc_release_nvme_buf: Return a nvme buffer back to hba nvme buf list.
* @phba: The Hba for which this call is being executed.
* @lpfc_ncmd: The nvme buffer which is being released.
*
* This routine releases @lpfc_ncmd nvme buffer by adding it to tail of @phba
* lpfc_io_buf_list list. For SLI4 XRI's are tied to the nvme buffer
* and cannot be reused for at least RA_TOV amount of time if it was
* aborted.
**/
static void
lpfc_release_nvme_buf(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_ncmd)
{
struct lpfc_sli4_hdw_queue *qp;
unsigned long iflag = 0;
if ((lpfc_ncmd->flags & LPFC_SBUF_BUMP_QDEPTH) && lpfc_ncmd->ndlp)
atomic_dec(&lpfc_ncmd->ndlp->cmd_pending);
lpfc_ncmd->ndlp = NULL;
lpfc_ncmd->flags &= ~LPFC_SBUF_BUMP_QDEPTH;
qp = lpfc_ncmd->hdwq;
if (unlikely(lpfc_ncmd->flags & LPFC_SBUF_XBUSY)) {
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6310 XB release deferred for "
"ox_id x%x on reqtag x%x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag,
lpfc_ncmd->cur_iocbq.iotag);
spin_lock_irqsave(&qp->abts_io_buf_list_lock, iflag);
list_add_tail(&lpfc_ncmd->list,
&qp->lpfc_abts_io_buf_list);
qp->abts_nvme_io_bufs++;
spin_unlock_irqrestore(&qp->abts_io_buf_list_lock, iflag);
} else
lpfc_release_io_buf(phba, (struct lpfc_io_buf *)lpfc_ncmd, qp);
}
/**
* lpfc_nvme_create_localport - Create/Bind an nvme localport instance.
* @vport: the lpfc_vport instance requesting a localport.
*
* This routine is invoked to create an nvme localport instance to bind
* to the nvme_fc_transport. It is called once during driver load
* like lpfc_create_shost after all other services are initialized.
* It requires a vport, vpi, and wwns at call time. Other localport
* parameters are modified as the driver's FCID and the Fabric WWN
* are established.
*
* Return codes
* 0 - successful
* -ENOMEM - no heap memory available
* other values - from nvme registration upcall
**/
int
lpfc_nvme_create_localport(struct lpfc_vport *vport)
{
int ret = 0;
struct lpfc_hba *phba = vport->phba;
struct nvme_fc_port_info nfcp_info;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
/* Initialize this localport instance. The vport wwn usage ensures
* that NPIV is accounted for.
*/
memset(&nfcp_info, 0, sizeof(struct nvme_fc_port_info));
nfcp_info.port_role = FC_PORT_ROLE_NVME_INITIATOR;
nfcp_info.node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
nfcp_info.port_name = wwn_to_u64(vport->fc_portname.u.wwn);
/* We need to tell the transport layer + 1 because it takes page
* alignment into account. When space for the SGL is allocated we
* allocate + 3, one for cmd, one for rsp and one for this alignment
*/
lpfc_nvme_template.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1;
/* Advertise how many hw queues we support based on cfg_hdw_queue,
* which will not exceed cpu count.
*/
lpfc_nvme_template.max_hw_queues = phba->cfg_hdw_queue;
if (!IS_ENABLED(CONFIG_NVME_FC))
return ret;
/* localport is allocated from the stack, but the registration
* call allocates heap memory as well as the private area.
*/
ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template,
&vport->phba->pcidev->dev, &localport);
if (!ret) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_NVME_DISC,
"6005 Successfully registered local "
"NVME port num %d, localP x%px, private "
"x%px, sg_seg %d\n",
localport->port_num, localport,
localport->private,
lpfc_nvme_template.max_sgl_segments);
/* Private is our lport size declared in the template. */
lport = (struct lpfc_nvme_lport *)localport->private;
vport->localport = localport;
lport->vport = vport;
vport->nvmei_support = 1;
atomic_set(&lport->xmt_fcp_noxri, 0);
atomic_set(&lport->xmt_fcp_bad_ndlp, 0);
atomic_set(&lport->xmt_fcp_qdepth, 0);
atomic_set(&lport->xmt_fcp_err, 0);
atomic_set(&lport->xmt_fcp_wqerr, 0);
atomic_set(&lport->xmt_fcp_abort, 0);
atomic_set(&lport->xmt_ls_abort, 0);
atomic_set(&lport->xmt_ls_err, 0);
atomic_set(&lport->cmpl_fcp_xb, 0);
atomic_set(&lport->cmpl_fcp_err, 0);
atomic_set(&lport->cmpl_ls_xb, 0);
atomic_set(&lport->cmpl_ls_err, 0);
atomic_set(&lport->fc4NvmeLsRequests, 0);
atomic_set(&lport->fc4NvmeLsCmpls, 0);
}
return ret;
}
#if (IS_ENABLED(CONFIG_NVME_FC))
/* lpfc_nvme_lport_unreg_wait - Wait for the host to complete an lport unreg.
*
* The driver has to wait for the host nvme transport to callback
* indicating the localport has successfully unregistered all
* resources. Since this is an uninterruptible wait, loop every ten
* seconds and print a message indicating no progress.
*
* An uninterruptible wait is used because of the risk of transport-to-
* driver state mismatch.
*/
static void
lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport,
struct lpfc_nvme_lport *lport,
struct completion *lport_unreg_cmp)
{
u32 wait_tmo;
int ret, i, pending = 0;
struct lpfc_sli_ring *pring;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli4_hdw_queue *qp;
int abts_scsi, abts_nvme;
/* Host transport has to clean up and confirm requiring an indefinite
* wait. Print a message if a 10 second wait expires and renew the
* wait. This is unexpected.
*/
wait_tmo = msecs_to_jiffies(LPFC_NVME_WAIT_TMO * 1000);
while (true) {
ret = wait_for_completion_timeout(lport_unreg_cmp, wait_tmo);
if (unlikely(!ret)) {
pending = 0;
abts_scsi = 0;
abts_nvme = 0;
for (i = 0; i < phba->cfg_hdw_queue; i++) {
qp = &phba->sli4_hba.hdwq[i];
if (!vport || !vport->localport ||
!qp || !qp->io_wq)
return;
pring = qp->io_wq->pring;
if (!pring)
continue;
pending += pring->txcmplq_cnt;
abts_scsi += qp->abts_scsi_io_bufs;
abts_nvme += qp->abts_nvme_io_bufs;
}
if (!vport || !vport->localport ||
vport->phba->hba_flag & HBA_PCI_ERR)
return;
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6176 Lport x%px Localport x%px wait "
"timed out. Pending %d [%d:%d]. "
"Renewing.\n",
lport, vport->localport, pending,
abts_scsi, abts_nvme);
continue;
}
break;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6177 Lport x%px Localport x%px Complete Success\n",
lport, vport->localport);
}
#endif
/**
* lpfc_nvme_destroy_localport - Destroy lpfc_nvme bound to nvme transport.
* @vport: pointer to a host virtual N_Port data structure
*
* This routine is invoked to destroy all lports bound to the phba.
* The lport memory was allocated by the nvme fc transport and is
* released there. This routine ensures all rports bound to the
* lport have been disconnected.
*
**/
void
lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
int ret;
DECLARE_COMPLETION_ONSTACK(lport_unreg_cmp);
if (vport->nvmei_support == 0)
return;
localport = vport->localport;
if (!localport)
return;
lport = (struct lpfc_nvme_lport *)localport->private;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
"6011 Destroying NVME localport x%px\n",
localport);
/* lport's rport list is clear. Unregister
* lport and release resources.
*/
lport->lport_unreg_cmp = &lport_unreg_cmp;
ret = nvme_fc_unregister_localport(localport);
/* Wait for completion. This either blocks
* indefinitely or succeeds
*/
lpfc_nvme_lport_unreg_wait(vport, lport, &lport_unreg_cmp);
vport->localport = NULL;
/* Regardless of the unregister upcall response, clear
* nvmei_support. All rports are unregistered and the
* driver will clean up.
*/
vport->nvmei_support = 0;
if (ret == 0) {
lpfc_printf_vlog(vport,
KERN_INFO, LOG_NVME_DISC,
"6009 Unregistered lport Success\n");
} else {
lpfc_printf_vlog(vport,
KERN_INFO, LOG_NVME_DISC,
"6010 Unregistered lport "
"Failed, status x%x\n",
ret);
}
#endif
}
void
lpfc_nvme_update_localport(struct lpfc_vport *vport)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
localport = vport->localport;
if (!localport) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
"6710 Update NVME fail. No localport\n");
return;
}
lport = (struct lpfc_nvme_lport *)localport->private;
if (!lport) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
"6171 Update NVME fail. localP x%px, No lport\n",
localport);
return;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
"6012 Update NVME lport x%px did x%x\n",
localport, vport->fc_myDID);
localport->port_id = vport->fc_myDID;
if (localport->port_id == 0)
localport->port_role = FC_PORT_ROLE_NVME_DISCOVERY;
else
localport->port_role = FC_PORT_ROLE_NVME_INITIATOR;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6030 bound lport x%px to DID x%06x\n",
lport, localport->port_id);
#endif
}
int
lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
int ret = 0;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_rport *rport;
struct lpfc_nvme_rport *oldrport;
struct nvme_fc_remote_port *remote_port;
struct nvme_fc_port_info rpinfo;
struct lpfc_nodelist *prev_ndlp = NULL;
struct fc_rport *srport = ndlp->rport;
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
"6006 Register NVME PORT. DID x%06x nlptype x%x\n",
ndlp->nlp_DID, ndlp->nlp_type);
localport = vport->localport;
if (!localport)
return 0;
lport = (struct lpfc_nvme_lport *)localport->private;
/* NVME rports are not preserved across devloss.
* Just register this instance. Note, rpinfo->dev_loss_tmo
* is left 0 to indicate accept transport defaults. The
* driver communicates port role capabilities consistent
* with the PRLI response data.
*/
memset(&rpinfo, 0, sizeof(struct nvme_fc_port_info));
rpinfo.port_id = ndlp->nlp_DID;
if (ndlp->nlp_type & NLP_NVME_TARGET)
rpinfo.port_role |= FC_PORT_ROLE_NVME_TARGET;
if (ndlp->nlp_type & NLP_NVME_INITIATOR)
rpinfo.port_role |= FC_PORT_ROLE_NVME_INITIATOR;
if (ndlp->nlp_type & NLP_NVME_DISCOVERY)
rpinfo.port_role |= FC_PORT_ROLE_NVME_DISCOVERY;
rpinfo.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
rpinfo.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
if (srport)
rpinfo.dev_loss_tmo = srport->dev_loss_tmo;
else
rpinfo.dev_loss_tmo = vport->cfg_devloss_tmo;
spin_lock_irq(&ndlp->lock);
oldrport = lpfc_ndlp_get_nrport(ndlp);
if (oldrport) {
prev_ndlp = oldrport->ndlp;
spin_unlock_irq(&ndlp->lock);
} else {
spin_unlock_irq(&ndlp->lock);
if (!lpfc_nlp_get(ndlp)) {
dev_warn(&vport->phba->pcidev->dev,
"Warning - No node ref - exit register\n");
return 0;
}
}
ret = nvme_fc_register_remoteport(localport, &rpinfo, &remote_port);
if (!ret) {
/* If the ndlp already has an nrport, this is just
* a resume of the existing rport. Else this is a
* new rport.
*/
/* Guard against an unregister/reregister
* race that leaves the WAIT flag set.
*/
spin_lock_irq(&ndlp->lock);
ndlp->fc4_xpt_flags &= ~NVME_XPT_UNREG_WAIT;
ndlp->fc4_xpt_flags |= NVME_XPT_REGD;
spin_unlock_irq(&ndlp->lock);
rport = remote_port->private;
if (oldrport) {
/* Sever the ndlp<->rport association
* before dropping the ndlp ref from
* register.
*/
spin_lock_irq(&ndlp->lock);
ndlp->nrport = NULL;
ndlp->fc4_xpt_flags &= ~NVME_XPT_UNREG_WAIT;
spin_unlock_irq(&ndlp->lock);
rport->ndlp = NULL;
rport->remoteport = NULL;
/* Reference only removed if previous NDLP is no longer
* active. It might be just a swap and removing the
* reference would cause a premature cleanup.
*/
if (prev_ndlp && prev_ndlp != ndlp) {
if (!prev_ndlp->nrport)
lpfc_nlp_put(prev_ndlp);
}
}
/* Clean bind the rport to the ndlp. */
rport->remoteport = remote_port;
rport->lport = lport;
rport->ndlp = ndlp;
spin_lock_irq(&ndlp->lock);
ndlp->nrport = rport;
spin_unlock_irq(&ndlp->lock);
lpfc_printf_vlog(vport, KERN_INFO,
LOG_NVME_DISC | LOG_NODE,
"6022 Bind lport x%px to remoteport x%px "
"rport x%px WWNN 0x%llx, "
"Rport WWPN 0x%llx DID "
"x%06x Role x%x, ndlp %p prev_ndlp x%px\n",
lport, remote_port, rport,
rpinfo.node_name, rpinfo.port_name,
rpinfo.port_id, rpinfo.port_role,
ndlp, prev_ndlp);
} else {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_TRACE_EVENT,
"6031 RemotePort Registration failed "
"err: %d, DID x%06x\n",
ret, ndlp->nlp_DID);
}
return ret;
#else
return 0;
#endif
}
/*
* lpfc_nvme_rescan_port - Check to see if we should rescan this remoteport
*
* If the ndlp represents an NVME Target, that we are logged into,
* ping the NVME FC Transport layer to initiate a device rescan
* on this remote NPort.
*/
void
lpfc_nvme_rescan_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
struct lpfc_nvme_rport *nrport;
struct nvme_fc_remote_port *remoteport = NULL;
spin_lock_irq(&ndlp->lock);
nrport = lpfc_ndlp_get_nrport(ndlp);
if (nrport)
remoteport = nrport->remoteport;
spin_unlock_irq(&ndlp->lock);
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6170 Rescan NPort DID x%06x type x%x "
"state x%x nrport x%px remoteport x%px\n",
ndlp->nlp_DID, ndlp->nlp_type, ndlp->nlp_state,
nrport, remoteport);
if (!nrport || !remoteport)
goto rescan_exit;
/* Only rescan if we are an NVME target in the MAPPED state */
if (remoteport->port_role & FC_PORT_ROLE_NVME_DISCOVERY &&
ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
nvme_fc_rescan_remoteport(remoteport);
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6172 NVME rescanned DID x%06x "
"port_state x%x\n",
ndlp->nlp_DID, remoteport->port_state);
}
return;
rescan_exit:
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6169 Skip NVME Rport Rescan, NVME remoteport "
"unregistered\n");
#endif
}
/* lpfc_nvme_unregister_port - unbind the DID and port_role from this rport.
*
* There is no notion of Devloss or rport recovery from the current
* nvme_transport perspective. Loss of an rport just means IO cannot
* be sent and recovery is completely up to the initator.
* For now, the driver just unbinds the DID and port_role so that
* no further IO can be issued. Changes are planned for later.
*
* Notes - the ndlp reference count is not decremented here since
* since there is no nvme_transport api for devloss. Node ref count
* is only adjusted in driver unload.
*/
void
lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
int ret;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_rport *rport;
struct nvme_fc_remote_port *remoteport = NULL;
localport = vport->localport;
/* This is fundamental error. The localport is always
* available until driver unload. Just exit.
*/
if (!localport)
return;
lport = (struct lpfc_nvme_lport *)localport->private;
if (!lport)
goto input_err;
spin_lock_irq(&ndlp->lock);
rport = lpfc_ndlp_get_nrport(ndlp);
if (rport)
remoteport = rport->remoteport;
spin_unlock_irq(&ndlp->lock);
if (!remoteport)
goto input_err;
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
"6033 Unreg nvme remoteport x%px, portname x%llx, "
"port_id x%06x, portstate x%x port type x%x "
"refcnt %d\n",
remoteport, remoteport->port_name,
remoteport->port_id, remoteport->port_state,
ndlp->nlp_type, kref_read(&ndlp->kref));
/* Sanity check ndlp type. Only call for NVME ports. Don't
* clear any rport state until the transport calls back.
*/
if (ndlp->nlp_type & NLP_NVME_TARGET) {
/* No concern about the role change on the nvme remoteport.
* The transport will update it.
*/
spin_lock_irq(&vport->phba->hbalock);
ndlp->fc4_xpt_flags |= NVME_XPT_UNREG_WAIT;
spin_unlock_irq(&vport->phba->hbalock);
/* Don't let the host nvme transport keep sending keep-alives
* on this remoteport. Vport is unloading, no recovery. The
* return values is ignored. The upcall is a courtesy to the
* transport.
*/
if (vport->load_flag & FC_UNLOADING ||
unlikely(vport->phba->hba_flag & HBA_PCI_ERR))
(void)nvme_fc_set_remoteport_devloss(remoteport, 0);
ret = nvme_fc_unregister_remoteport(remoteport);
/* The driver no longer knows if the nrport memory is valid.
* because the controller teardown process has begun and
* is asynchronous. Break the binding in the ndlp. Also
* remove the register ndlp reference to setup node release.
*/
ndlp->nrport = NULL;
lpfc_nlp_put(ndlp);
if (ret != 0) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6167 NVME unregister failed %d "
"port_state x%x\n",
ret, remoteport->port_state);
}
}
return;
input_err:
#endif
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"6168 State error: lport x%px, rport x%px FCID x%06x\n",
vport->localport, ndlp->rport, ndlp->nlp_DID);
}
/**
* lpfc_sli4_nvme_pci_offline_aborted - Fast-path process of NVME xri abort
* @phba: pointer to lpfc hba data structure.
* @lpfc_ncmd: The nvme job structure for the request being aborted.
*
* This routine is invoked by the worker thread to process a SLI4 fast-path
* NVME aborted xri. Aborted NVME IO commands are completed to the transport
* here.
**/
void
lpfc_sli4_nvme_pci_offline_aborted(struct lpfc_hba *phba,
struct lpfc_io_buf *lpfc_ncmd)
{
struct nvmefc_fcp_req *nvme_cmd = NULL;
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6533 %s nvme_cmd %p tag x%x abort complete and "
"xri released\n", __func__,
lpfc_ncmd->nvmeCmd,
lpfc_ncmd->cur_iocbq.iotag);
/* Aborted NVME commands are required to not complete
* before the abort exchange command fully completes.
* Once completed, it is available via the put list.
*/
if (lpfc_ncmd->nvmeCmd) {
nvme_cmd = lpfc_ncmd->nvmeCmd;
nvme_cmd->transferred_length = 0;
nvme_cmd->rcv_rsplen = 0;
nvme_cmd->status = NVME_SC_INTERNAL;
nvme_cmd->done(nvme_cmd);
lpfc_ncmd->nvmeCmd = NULL;
}
lpfc_release_nvme_buf(phba, lpfc_ncmd);
}
/**
* lpfc_sli4_nvme_xri_aborted - Fast-path process of NVME xri abort
* @phba: pointer to lpfc hba data structure.
* @axri: pointer to the fcp xri abort wcqe structure.
* @lpfc_ncmd: The nvme job structure for the request being aborted.
*
* This routine is invoked by the worker thread to process a SLI4 fast-path
* NVME aborted xri. Aborted NVME IO commands are completed to the transport
* here.
**/
void
lpfc_sli4_nvme_xri_aborted(struct lpfc_hba *phba,
struct sli4_wcqe_xri_aborted *axri,
struct lpfc_io_buf *lpfc_ncmd)
{
uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
struct nvmefc_fcp_req *nvme_cmd = NULL;
struct lpfc_nodelist *ndlp = lpfc_ncmd->ndlp;
if (ndlp)
lpfc_sli4_abts_err_handler(phba, ndlp, axri);
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
"6311 nvme_cmd %p xri x%x tag x%x abort complete and "
"xri released\n",
lpfc_ncmd->nvmeCmd, xri,
lpfc_ncmd->cur_iocbq.iotag);
/* Aborted NVME commands are required to not complete
* before the abort exchange command fully completes.
* Once completed, it is available via the put list.
*/
if (lpfc_ncmd->nvmeCmd) {
nvme_cmd = lpfc_ncmd->nvmeCmd;
nvme_cmd->done(nvme_cmd);
lpfc_ncmd->nvmeCmd = NULL;
}
lpfc_release_nvme_buf(phba, lpfc_ncmd);
}
/**
* lpfc_nvme_wait_for_io_drain - Wait for all NVME wqes to complete
* @phba: Pointer to HBA context object.
*
* This function flushes all wqes in the nvme rings and frees all resources
* in the txcmplq. This function does not issue abort wqes for the IO
* commands in txcmplq, they will just be returned with
* IOERR_SLI_DOWN. This function is invoked with EEH when device's PCI
* slot has been permanently disabled.
**/
void
lpfc_nvme_wait_for_io_drain(struct lpfc_hba *phba)
{
struct lpfc_sli_ring *pring;
u32 i, wait_cnt = 0;
if (phba->sli_rev < LPFC_SLI_REV4 || !phba->sli4_hba.hdwq)
return;
/* Cycle through all IO rings and make sure all outstanding
* WQEs have been removed from the txcmplqs.
*/
for (i = 0; i < phba->cfg_hdw_queue; i++) {
if (!phba->sli4_hba.hdwq[i].io_wq)
continue;
pring = phba->sli4_hba.hdwq[i].io_wq->pring;
if (!pring)
continue;
/* Retrieve everything on the txcmplq */
while (!list_empty(&pring->txcmplq)) {
msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1);
wait_cnt++;
/* The sleep is 10mS. Every ten seconds,
* dump a message. Something is wrong.
*/
if ((wait_cnt % 1000) == 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
"6178 NVME IO not empty, "
"cnt %d\n", wait_cnt);
}
}
}
/* Make sure HBA is alive */
lpfc_issue_hb_tmo(phba);
}
void
lpfc_nvme_cancel_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
uint32_t stat, uint32_t param)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
struct lpfc_io_buf *lpfc_ncmd;
struct nvmefc_fcp_req *nCmd;
struct lpfc_wcqe_complete wcqe;
struct lpfc_wcqe_complete *wcqep = &wcqe;
lpfc_ncmd = (struct lpfc_io_buf *)pwqeIn->context1;
if (!lpfc_ncmd) {
lpfc_sli_release_iocbq(phba, pwqeIn);
return;
}
/* For abort iocb just return, IO iocb will do a done call */
if (bf_get(wqe_cmnd, &pwqeIn->wqe.gen_req.wqe_com) ==
CMD_ABORT_XRI_CX) {
lpfc_sli_release_iocbq(phba, pwqeIn);
return;
}
spin_lock(&lpfc_ncmd->buf_lock);
nCmd = lpfc_ncmd->nvmeCmd;
if (!nCmd) {
spin_unlock(&lpfc_ncmd->buf_lock);
lpfc_release_nvme_buf(phba, lpfc_ncmd);
return;
}
spin_unlock(&lpfc_ncmd->buf_lock);
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_IOERR,
"6194 NVME Cancel xri %x\n",
lpfc_ncmd->cur_iocbq.sli4_xritag);
wcqep->word0 = 0;
bf_set(lpfc_wcqe_c_status, wcqep, stat);
wcqep->parameter = param;
wcqep->word3 = 0; /* xb is 0 */
/* Call release with XB=1 to queue the IO into the abort list. */
if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
bf_set(lpfc_wcqe_c_xb, wcqep, 1);
(pwqeIn->wqe_cmpl)(phba, pwqeIn, wcqep);
#endif
}