linux/drivers/w1/masters/w1-gpio.c
Andrew F. Davis de0d6dbdbd w1: Add subsystem kernel public interface
Like other subsystems we should be able to define slave devices outside
of the w1 directory. To do this we move public facing interface
definitions to include/linux/w1.h and rename the internal definition
file to w1_internal.h.

As w1_family.h and w1_int.h contained almost entirely public
driver interface definitions we simply removed these files and
moved the remaining definitions into w1_internal.h.

With this we can now start to move slave devices out of w1/slaves and
into the subsystem based on the function they implement, again like
other drivers.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:54:54 +02:00

237 lines
5.2 KiB
C

/*
* w1-gpio - GPIO w1 bus master driver
*
* Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/w1-gpio.h>
#include <linux/gpio.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/delay.h>
#include <linux/w1.h>
static u8 w1_gpio_set_pullup(void *data, int delay)
{
struct w1_gpio_platform_data *pdata = data;
if (delay) {
pdata->pullup_duration = delay;
} else {
if (pdata->pullup_duration) {
gpio_direction_output(pdata->pin, 1);
msleep(pdata->pullup_duration);
gpio_direction_input(pdata->pin);
}
pdata->pullup_duration = 0;
}
return 0;
}
static void w1_gpio_write_bit_dir(void *data, u8 bit)
{
struct w1_gpio_platform_data *pdata = data;
if (bit)
gpio_direction_input(pdata->pin);
else
gpio_direction_output(pdata->pin, 0);
}
static void w1_gpio_write_bit_val(void *data, u8 bit)
{
struct w1_gpio_platform_data *pdata = data;
gpio_set_value(pdata->pin, bit);
}
static u8 w1_gpio_read_bit(void *data)
{
struct w1_gpio_platform_data *pdata = data;
return gpio_get_value(pdata->pin) ? 1 : 0;
}
#if defined(CONFIG_OF)
static const struct of_device_id w1_gpio_dt_ids[] = {
{ .compatible = "w1-gpio" },
{}
};
MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
#endif
static int w1_gpio_probe_dt(struct platform_device *pdev)
{
struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *np = pdev->dev.of_node;
int gpio;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
if (of_get_property(np, "linux,open-drain", NULL))
pdata->is_open_drain = 1;
gpio = of_get_gpio(np, 0);
if (gpio < 0) {
if (gpio != -EPROBE_DEFER)
dev_err(&pdev->dev,
"Failed to parse gpio property for data pin (%d)\n",
gpio);
return gpio;
}
pdata->pin = gpio;
gpio = of_get_gpio(np, 1);
if (gpio == -EPROBE_DEFER)
return gpio;
/* ignore other errors as the pullup gpio is optional */
pdata->ext_pullup_enable_pin = gpio;
pdev->dev.platform_data = pdata;
return 0;
}
static int w1_gpio_probe(struct platform_device *pdev)
{
struct w1_bus_master *master;
struct w1_gpio_platform_data *pdata;
int err;
if (of_have_populated_dt()) {
err = w1_gpio_probe_dt(pdev);
if (err < 0)
return err;
}
pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "No configuration data\n");
return -ENXIO;
}
master = devm_kzalloc(&pdev->dev, sizeof(struct w1_bus_master),
GFP_KERNEL);
if (!master) {
dev_err(&pdev->dev, "Out of memory\n");
return -ENOMEM;
}
err = devm_gpio_request(&pdev->dev, pdata->pin, "w1");
if (err) {
dev_err(&pdev->dev, "gpio_request (pin) failed\n");
return err;
}
if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
err = devm_gpio_request_one(&pdev->dev,
pdata->ext_pullup_enable_pin, GPIOF_INIT_LOW,
"w1 pullup");
if (err < 0) {
dev_err(&pdev->dev, "gpio_request_one "
"(ext_pullup_enable_pin) failed\n");
return err;
}
}
master->data = pdata;
master->read_bit = w1_gpio_read_bit;
if (pdata->is_open_drain) {
gpio_direction_output(pdata->pin, 1);
master->write_bit = w1_gpio_write_bit_val;
} else {
gpio_direction_input(pdata->pin);
master->write_bit = w1_gpio_write_bit_dir;
master->set_pullup = w1_gpio_set_pullup;
}
err = w1_add_master_device(master);
if (err) {
dev_err(&pdev->dev, "w1_add_master device failed\n");
return err;
}
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(1);
if (gpio_is_valid(pdata->ext_pullup_enable_pin))
gpio_set_value(pdata->ext_pullup_enable_pin, 1);
platform_set_drvdata(pdev, master);
return 0;
}
static int w1_gpio_remove(struct platform_device *pdev)
{
struct w1_bus_master *master = platform_get_drvdata(pdev);
struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(0);
if (gpio_is_valid(pdata->ext_pullup_enable_pin))
gpio_set_value(pdata->ext_pullup_enable_pin, 0);
w1_remove_master_device(master);
return 0;
}
static int __maybe_unused w1_gpio_suspend(struct device *dev)
{
struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(0);
return 0;
}
static int __maybe_unused w1_gpio_resume(struct device *dev)
{
struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(1);
return 0;
}
static SIMPLE_DEV_PM_OPS(w1_gpio_pm_ops, w1_gpio_suspend, w1_gpio_resume);
static struct platform_driver w1_gpio_driver = {
.driver = {
.name = "w1-gpio",
.pm = &w1_gpio_pm_ops,
.of_match_table = of_match_ptr(w1_gpio_dt_ids),
},
.probe = w1_gpio_probe,
.remove = w1_gpio_remove,
};
module_platform_driver(w1_gpio_driver);
MODULE_DESCRIPTION("GPIO w1 bus master driver");
MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
MODULE_LICENSE("GPL");