mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 00:24:58 +08:00
a6af77637a
This patch adds complete support for manipulating the L2 Policing Tables from this switch. There are 45 table entries, one entry per each port and traffic class, and one dedicated entry for broadcast traffic for each ingress port. Policing entries are shareable, and we use this functionality to support shared block filters. We are modeling broadcast policers as simple tc-flower matches on dst_mac. As for the traffic class policers, the switch only deduces the traffic class from the VLAN PCP field, so it makes sense to model this as a tc-flower match on vlan_prio. How to limit broadcast traffic coming from all front-panel ports to a cumulated total of 10 Mbit/s: tc qdisc add dev sw0p0 ingress_block 1 clsact tc qdisc add dev sw0p1 ingress_block 1 clsact tc qdisc add dev sw0p2 ingress_block 1 clsact tc qdisc add dev sw0p3 ingress_block 1 clsact tc filter add block 1 flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \ action police rate 10mbit burst 64k How to limit traffic with VLAN PCP 0 (also includes untagged traffic) to 100 Mbit/s on port 0 only: tc filter add dev sw0p0 ingress protocol 802.1Q flower skip_sw \ vlan_prio 0 action police rate 100mbit burst 64k The broadcast, VLAN PCP and port policers are compatible with one another (can be installed at the same time on a port). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| sja1105_clocking.c | ||
| sja1105_dynamic_config.c | ||
| sja1105_dynamic_config.h | ||
| sja1105_ethtool.c | ||
| sja1105_flower.c | ||
| sja1105_main.c | ||
| sja1105_ptp.c | ||
| sja1105_ptp.h | ||
| sja1105_sgmii.h | ||
| sja1105_spi.c | ||
| sja1105_static_config.c | ||
| sja1105_static_config.h | ||
| sja1105_tas.c | ||
| sja1105_tas.h | ||
| sja1105.h | ||