mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-03 00:54:09 +08:00
af96579dc3
Each of the CPSW5G ports in J7200 support additional modes like QSGMII. Add a new compatible for J7200 to support the additional modes. In TI's J7200, each of the CPSW5G ethernet interfaces can act as a QSGMII or QSGMII-SUB port. The QSGMII interface is responsible for performing auto-negotiation between the MAC and the PHY while the rest of the interfaces are designated as QSGMII-SUB interfaces, indicating that they will not be taking part in the auto-negotiation process. To indicate the interface which will serve as the main QSGMII interface, add a property "ti,qsgmii-main-ports", whose value indicates the port number of the interface which shall serve as the main QSGMII interface. The rest of the interfaces are then assigned QSGMII-SUB mode by default. The property "ti,qsgmii-main-ports" is used to configure the CTRLMMR_ENETx_CTRL register. Depending on the device, it is possible for more than one QSGMII main port to exist. Thus, the property "ti,qsgmii-main-ports" is defined as an array of values in order to reuse the property for other devices. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20220912085650.83263-4-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
445 lines
12 KiB
C
445 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Texas Instruments CPSW Port's PHY Interface Mode selection Driver
|
|
*
|
|
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Based on cpsw-phy-sel.c driver created by Mugunthan V N <mugunthanvnm@ti.com>
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* AM33xx SoC specific definitions for the CONTROL port */
|
|
#define AM33XX_GMII_SEL_MODE_MII 0
|
|
#define AM33XX_GMII_SEL_MODE_RMII 1
|
|
#define AM33XX_GMII_SEL_MODE_RGMII 2
|
|
|
|
/* J72xx SoC specific definitions for the CONTROL port */
|
|
#define J72XX_GMII_SEL_MODE_QSGMII 4
|
|
#define J72XX_GMII_SEL_MODE_QSGMII_SUB 6
|
|
|
|
#define PHY_GMII_PORT(n) BIT((n) - 1)
|
|
|
|
enum {
|
|
PHY_GMII_SEL_PORT_MODE = 0,
|
|
PHY_GMII_SEL_RGMII_ID_MODE,
|
|
PHY_GMII_SEL_RMII_IO_CLK_EN,
|
|
PHY_GMII_SEL_LAST,
|
|
};
|
|
|
|
struct phy_gmii_sel_phy_priv {
|
|
struct phy_gmii_sel_priv *priv;
|
|
u32 id;
|
|
struct phy *if_phy;
|
|
int rmii_clock_external;
|
|
int phy_if_mode;
|
|
struct regmap_field *fields[PHY_GMII_SEL_LAST];
|
|
};
|
|
|
|
struct phy_gmii_sel_soc_data {
|
|
u32 num_ports;
|
|
u32 features;
|
|
const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
|
|
bool use_of_data;
|
|
u64 extra_modes;
|
|
};
|
|
|
|
struct phy_gmii_sel_priv {
|
|
struct device *dev;
|
|
const struct phy_gmii_sel_soc_data *soc_data;
|
|
struct regmap *regmap;
|
|
struct phy_provider *phy_provider;
|
|
struct phy_gmii_sel_phy_priv *if_phys;
|
|
u32 num_ports;
|
|
u32 reg_offset;
|
|
u32 qsgmii_main_ports;
|
|
};
|
|
|
|
static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
|
|
{
|
|
struct phy_gmii_sel_phy_priv *if_phy = phy_get_drvdata(phy);
|
|
const struct phy_gmii_sel_soc_data *soc_data = if_phy->priv->soc_data;
|
|
struct device *dev = if_phy->priv->dev;
|
|
struct regmap_field *regfield;
|
|
int ret, rgmii_id = 0;
|
|
u32 gmii_sel_mode = 0;
|
|
|
|
if (mode != PHY_MODE_ETHERNET)
|
|
return -EINVAL;
|
|
|
|
switch (submode) {
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
gmii_sel_mode = AM33XX_GMII_SEL_MODE_RMII;
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
|
|
rgmii_id = 1;
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_MII:
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
gmii_sel_mode = AM33XX_GMII_SEL_MODE_MII;
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
if (!(soc_data->extra_modes & BIT(PHY_INTERFACE_MODE_QSGMII)))
|
|
goto unsupported;
|
|
if (if_phy->priv->qsgmii_main_ports & BIT(if_phy->id - 1))
|
|
gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII;
|
|
else
|
|
gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII_SUB;
|
|
break;
|
|
|
|
default:
|
|
goto unsupported;
|
|
}
|
|
|
|
if_phy->phy_if_mode = submode;
|
|
|
|
dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n",
|
|
__func__, if_phy->id, submode, rgmii_id,
|
|
if_phy->rmii_clock_external);
|
|
|
|
regfield = if_phy->fields[PHY_GMII_SEL_PORT_MODE];
|
|
ret = regmap_field_write(regfield, gmii_sel_mode);
|
|
if (ret) {
|
|
dev_err(dev, "port%u: set mode fail %d", if_phy->id, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE) &&
|
|
if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE]) {
|
|
regfield = if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE];
|
|
ret = regmap_field_write(regfield, rgmii_id);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) &&
|
|
if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN]) {
|
|
regfield = if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN];
|
|
ret = regmap_field_write(regfield,
|
|
if_phy->rmii_clock_external);
|
|
}
|
|
|
|
return 0;
|
|
|
|
unsupported:
|
|
dev_warn(dev, "port%u: unsupported mode: \"%s\"\n",
|
|
if_phy->id, phy_modes(submode));
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const
|
|
struct reg_field phy_gmii_sel_fields_am33xx[][PHY_GMII_SEL_LAST] = {
|
|
{
|
|
[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 0, 1),
|
|
[PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 4, 4),
|
|
[PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 6, 6),
|
|
},
|
|
{
|
|
[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 2, 3),
|
|
[PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 5, 5),
|
|
[PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 7, 7),
|
|
},
|
|
};
|
|
|
|
static const
|
|
struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am33xx = {
|
|
.num_ports = 2,
|
|
.features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) |
|
|
BIT(PHY_GMII_SEL_RMII_IO_CLK_EN),
|
|
.regfields = phy_gmii_sel_fields_am33xx,
|
|
};
|
|
|
|
static const
|
|
struct reg_field phy_gmii_sel_fields_dra7[][PHY_GMII_SEL_LAST] = {
|
|
{
|
|
[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 0, 1),
|
|
},
|
|
{
|
|
[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 4, 5),
|
|
},
|
|
};
|
|
|
|
static const
|
|
struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dra7 = {
|
|
.num_ports = 2,
|
|
.regfields = phy_gmii_sel_fields_dra7,
|
|
};
|
|
|
|
static const
|
|
struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = {
|
|
.num_ports = 2,
|
|
.features = BIT(PHY_GMII_SEL_RGMII_ID_MODE),
|
|
.regfields = phy_gmii_sel_fields_am33xx,
|
|
};
|
|
|
|
static const
|
|
struct reg_field phy_gmii_sel_fields_am654[][PHY_GMII_SEL_LAST] = {
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x0, 0, 2), },
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4, 0, 2), },
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x8, 0, 2), },
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0xC, 0, 2), },
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x10, 0, 2), },
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x14, 0, 2), },
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x18, 0, 2), },
|
|
{ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x1C, 0, 2), },
|
|
};
|
|
|
|
static const
|
|
struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = {
|
|
.use_of_data = true,
|
|
.regfields = phy_gmii_sel_fields_am654,
|
|
};
|
|
|
|
static const
|
|
struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
|
|
.use_of_data = true,
|
|
.regfields = phy_gmii_sel_fields_am654,
|
|
.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
|
|
};
|
|
|
|
static const struct of_device_id phy_gmii_sel_id_table[] = {
|
|
{
|
|
.compatible = "ti,am3352-phy-gmii-sel",
|
|
.data = &phy_gmii_sel_soc_am33xx,
|
|
},
|
|
{
|
|
.compatible = "ti,dra7xx-phy-gmii-sel",
|
|
.data = &phy_gmii_sel_soc_dra7,
|
|
},
|
|
{
|
|
.compatible = "ti,am43xx-phy-gmii-sel",
|
|
.data = &phy_gmii_sel_soc_am33xx,
|
|
},
|
|
{
|
|
.compatible = "ti,dm814-phy-gmii-sel",
|
|
.data = &phy_gmii_sel_soc_dm814,
|
|
},
|
|
{
|
|
.compatible = "ti,am654-phy-gmii-sel",
|
|
.data = &phy_gmii_sel_soc_am654,
|
|
},
|
|
{
|
|
.compatible = "ti,j7200-cpsw5g-phy-gmii-sel",
|
|
.data = &phy_gmii_sel_cpsw5g_soc_j7200,
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
|
|
|
|
static const struct phy_ops phy_gmii_sel_ops = {
|
|
.set_mode = phy_gmii_sel_mode,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *phy_gmii_sel_of_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct phy_gmii_sel_priv *priv = dev_get_drvdata(dev);
|
|
int phy_id = args->args[0];
|
|
|
|
if (args->args_count < 1)
|
|
return ERR_PTR(-EINVAL);
|
|
if (!priv || !priv->if_phys)
|
|
return ERR_PTR(-ENODEV);
|
|
if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) &&
|
|
args->args_count < 2)
|
|
return ERR_PTR(-EINVAL);
|
|
if (phy_id > priv->num_ports)
|
|
return ERR_PTR(-EINVAL);
|
|
if (phy_id != priv->if_phys[phy_id - 1].id)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
phy_id--;
|
|
if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN))
|
|
priv->if_phys[phy_id].rmii_clock_external = args->args[1];
|
|
dev_dbg(dev, "%s id:%u ext:%d\n", __func__,
|
|
priv->if_phys[phy_id].id, args->args[1]);
|
|
|
|
return priv->if_phys[phy_id].if_phy;
|
|
}
|
|
|
|
static int phy_gmii_init_phy(struct phy_gmii_sel_priv *priv, int port,
|
|
struct phy_gmii_sel_phy_priv *if_phy)
|
|
{
|
|
const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data;
|
|
struct device *dev = priv->dev;
|
|
const struct reg_field *fields;
|
|
struct regmap_field *regfield;
|
|
struct reg_field field;
|
|
int ret;
|
|
|
|
if_phy->id = port;
|
|
if_phy->priv = priv;
|
|
|
|
fields = soc_data->regfields[port - 1];
|
|
field = *fields++;
|
|
field.reg += priv->reg_offset;
|
|
dev_dbg(dev, "%s field %x %d %d\n", __func__,
|
|
field.reg, field.msb, field.lsb);
|
|
|
|
regfield = devm_regmap_field_alloc(dev, priv->regmap, field);
|
|
if (IS_ERR(regfield))
|
|
return PTR_ERR(regfield);
|
|
if_phy->fields[PHY_GMII_SEL_PORT_MODE] = regfield;
|
|
|
|
field = *fields++;
|
|
field.reg += priv->reg_offset;
|
|
if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE)) {
|
|
regfield = devm_regmap_field_alloc(dev,
|
|
priv->regmap,
|
|
field);
|
|
if (IS_ERR(regfield))
|
|
return PTR_ERR(regfield);
|
|
if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE] = regfield;
|
|
dev_dbg(dev, "%s field %x %d %d\n", __func__,
|
|
field.reg, field.msb, field.lsb);
|
|
}
|
|
|
|
field = *fields;
|
|
field.reg += priv->reg_offset;
|
|
if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN)) {
|
|
regfield = devm_regmap_field_alloc(dev,
|
|
priv->regmap,
|
|
field);
|
|
if (IS_ERR(regfield))
|
|
return PTR_ERR(regfield);
|
|
if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN] = regfield;
|
|
dev_dbg(dev, "%s field %x %d %d\n", __func__,
|
|
field.reg, field.msb, field.lsb);
|
|
}
|
|
|
|
if_phy->if_phy = devm_phy_create(dev,
|
|
priv->dev->of_node,
|
|
&phy_gmii_sel_ops);
|
|
if (IS_ERR(if_phy->if_phy)) {
|
|
ret = PTR_ERR(if_phy->if_phy);
|
|
dev_err(dev, "Failed to create phy%d %d\n", port, ret);
|
|
return ret;
|
|
}
|
|
phy_set_drvdata(if_phy->if_phy, if_phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
|
|
{
|
|
const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data;
|
|
struct phy_gmii_sel_phy_priv *if_phys;
|
|
struct device *dev = priv->dev;
|
|
int i, ret;
|
|
|
|
if (soc_data->use_of_data) {
|
|
const __be32 *offset;
|
|
u64 size;
|
|
|
|
offset = of_get_address(dev->of_node, 0, &size, NULL);
|
|
if (!offset)
|
|
return -EINVAL;
|
|
priv->num_ports = size / sizeof(u32);
|
|
if (!priv->num_ports)
|
|
return -EINVAL;
|
|
priv->reg_offset = __be32_to_cpu(*offset);
|
|
}
|
|
|
|
if_phys = devm_kcalloc(dev, priv->num_ports,
|
|
sizeof(*if_phys), GFP_KERNEL);
|
|
if (!if_phys)
|
|
return -ENOMEM;
|
|
dev_dbg(dev, "%s %d\n", __func__, priv->num_ports);
|
|
|
|
for (i = 0; i < priv->num_ports; i++) {
|
|
ret = phy_gmii_init_phy(priv, i + 1, &if_phys[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
priv->if_phys = if_phys;
|
|
return 0;
|
|
}
|
|
|
|
static int phy_gmii_sel_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
const struct of_device_id *of_id;
|
|
struct phy_gmii_sel_priv *priv;
|
|
u32 main_ports = 1;
|
|
int ret;
|
|
|
|
of_id = of_match_node(phy_gmii_sel_id_table, pdev->dev.of_node);
|
|
if (!of_id)
|
|
return -EINVAL;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->dev = &pdev->dev;
|
|
priv->soc_data = of_id->data;
|
|
priv->num_ports = priv->soc_data->num_ports;
|
|
of_property_read_u32(node, "ti,qsgmii-main-ports", &main_ports);
|
|
/*
|
|
* Ensure that main_ports is within bounds. If the property
|
|
* ti,qsgmii-main-ports is not mentioned, or the value mentioned
|
|
* is out of bounds, default to 1.
|
|
*/
|
|
if (main_ports < 1 || main_ports > 4)
|
|
main_ports = 1;
|
|
priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports);
|
|
|
|
priv->regmap = syscon_node_to_regmap(node->parent);
|
|
if (IS_ERR(priv->regmap)) {
|
|
ret = PTR_ERR(priv->regmap);
|
|
dev_err(dev, "Failed to get syscon %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = phy_gmii_sel_init_ports(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_set_drvdata(&pdev->dev, priv);
|
|
|
|
priv->phy_provider =
|
|
devm_of_phy_provider_register(dev,
|
|
phy_gmii_sel_of_xlate);
|
|
if (IS_ERR(priv->phy_provider)) {
|
|
ret = PTR_ERR(priv->phy_provider);
|
|
dev_err(dev, "Failed to create phy provider %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver phy_gmii_sel_driver = {
|
|
.probe = phy_gmii_sel_probe,
|
|
.driver = {
|
|
.name = "phy-gmii-sel",
|
|
.of_match_table = phy_gmii_sel_id_table,
|
|
},
|
|
};
|
|
module_platform_driver(phy_gmii_sel_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Grygorii Strashko <grygorii.strashko@ti.com>");
|
|
MODULE_DESCRIPTION("TI CPSW Port's PHY Interface Mode selection Driver");
|