linux/drivers/net/ethernet/broadcom/Kconfig
Arnd Bergmann 00fb3a7c7c net: systemport: add NET_DSA dependency
The notifier cause a link error when NET_DSA is a loadable
module:

drivers/net/ethernet/broadcom/bcmsysport.o: In function `bcm_sysport_remove':
bcmsysport.c:(.text+0x1582): undefined reference to `unregister_dsa_notifier'
drivers/net/ethernet/broadcom/bcmsysport.o: In function `bcm_sysport_probe':
bcmsysport.c:(.text+0x278d): undefined reference to `register_dsa_notifier'

This adds a dependency that forces the systemport driver to be
a loadable module as well when that happens, but otherwise
allows it to be built normally when DSA is either built-in or
completely disabled.

Fixes: d156576362 ("net: systemport: Establish lower/upper queue mapping")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 21:21:05 +01:00

236 lines
6.4 KiB
Plaintext

#
# Broadcom device configuration
#
config NET_VENDOR_BROADCOM
bool "Broadcom devices"
default y
depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
SIBYTE_SB1xxx_SOC
---help---
If you have a network (Ethernet) chipset belonging to this class,
say Y.
Note that the answer to this question does not directly affect
the kernel: saying N will just case the configurator to skip all
the questions regarding AMD chipsets. If you say Y, you will be asked
for your specific chipset/driver in the following questions.
if NET_VENDOR_BROADCOM
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
select PHYLIB
---help---
If you have a network (Ethernet) controller of this type, say Y
or M here.
To compile this driver as a module, choose M here. The module
will be called b44.
# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
bool
depends on B44 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
default y
# Auto-select SSB PCICORE driver, if possible
config B44_PCICORE_AUTOSELECT
bool
depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
select SSB_DRIVER_PCICORE
default y
config B44_PCI
bool
depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
default y
config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support"
depends on BCM63XX
select MII
select PHYLIB
help
This driver supports the ethernet MACs in the Broadcom 63xx
MIPS chipset family (BCM63XX).
config BCMGENET
tristate "Broadcom GENET internal MAC support"
depends on OF && HAS_IOMEM
select MII
select PHYLIB
select FIXED_PHY
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
help
This driver supports the built-in Ethernet MACs found in the
Broadcom BCM7xxx Set Top Box family chipset.
config BNX2
tristate "QLogic bnx2 support"
depends on PCI
select CRC32
select FW_LOADER
---help---
This driver supports QLogic bnx2 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
config CNIC
tristate "QLogic CNIC support"
depends on PCI && (IPV6 || IPV6=n)
select BNX2
select UIO
---help---
This driver supports offload features of QLogic bnx2 gigabit
Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called cnic. This is recommended.
config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
---help---
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
and BCM1480 chips.
To compile this driver as a module, choose M here: the module
will be called sb1250-mac.
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
select PHYLIB
imply PTP_1588_CLOCK
---help---
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
config TIGON3_HWMON
bool "Broadcom Tigon3 HWMON support"
default y
depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
---help---
Say Y if you want to expose the thermal sensor on Tigon3 devices.
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
imply PTP_1588_CLOCK
select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
select MDIO
---help---
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
config BNX2X_SRIOV
bool "Broadcom 578xx and 57712 SR-IOV support"
depends on BNX2X && PCI_IOV
default y
---help---
This configuration parameter enables Single Root Input Output
Virtualization support in the 578xx and 57712 products. This
allows for virtual function acceleration in virtual environments.
config BGMAC
tristate
help
This enables the integrated ethernet controller support for many
Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
needs to be enabled to select this.
config BGMAC_BCMA
tristate "Broadcom iProc GBit BCMA support"
depends on BCMA && BCMA_HOST_SOC
depends on HAS_DMA
depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
select BGMAC
select PHYLIB
select FIXED_PHY
---help---
This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
They can be found on BCM47xx SoCs and provide gigabit ethernet.
In case of using this driver on BCM4706 it's also requires to enable
BCMA_DRIVER_GMAC_CMN to make it work.
config BGMAC_PLATFORM
tristate "Broadcom iProc GBit platform support"
depends on HAS_DMA
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on OF
select BGMAC
select PHYLIB
select FIXED_PHY
default ARCH_BCM_IPROC
---help---
Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
controller through the generic platform interface
config SYSTEMPORT
tristate "Broadcom SYSTEMPORT internal MAC support"
depends on OF
depends on NET_DSA || !NET_DSA
select MII
select PHYLIB
select FIXED_PHY
help
This driver supports the built-in Ethernet MACs found in the
Broadcom BCM7xxx Set Top Box family chipset using an internal
Ethernet switch.
config BNXT
tristate "Broadcom NetXtreme-C/E support"
depends on PCI
depends on MAY_USE_DEVLINK
select FW_LOADER
select LIBCRC32C
---help---
This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
Ethernet cards. To compile this driver as a module, choose M here:
the module will be called bnxt_en. This is recommended.
config BNXT_SRIOV
bool "Broadcom NetXtreme-C/E SR-IOV support"
depends on BNXT && PCI_IOV
default y
---help---
This configuration parameter enables Single Root Input Output
Virtualization support in the NetXtreme-C/E products. This
allows for virtual function acceleration in virtual environments.
config BNXT_FLOWER_OFFLOAD
bool "TC Flower offload support for NetXtreme-C/E"
depends on BNXT
default y
---help---
This configuration parameter enables TC Flower packet classifier
offload for eswitch. This option enables SR-IOV switchdev eswitch
offload.
config BNXT_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on BNXT && DCB
---help---
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If unsure, say N.
endif # NET_VENDOR_BROADCOM