mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
8472b529e1
Fix trivial copy/paste bug.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: ef1f09eca7 ("pwm: Add a driver for the STMPE PWM")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
320 lines
7.2 KiB
C
320 lines
7.2 KiB
C
/*
|
|
* Copyright (C) 2016 Linaro Ltd.
|
|
*
|
|
* Author: Linus Walleij <linus.walleij@linaro.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mfd/stmpe.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define STMPE24XX_PWMCS 0x30
|
|
#define PWMCS_EN_PWM0 BIT(0)
|
|
#define PWMCS_EN_PWM1 BIT(1)
|
|
#define PWMCS_EN_PWM2 BIT(2)
|
|
#define STMPE24XX_PWMIC0 0x38
|
|
#define STMPE24XX_PWMIC1 0x39
|
|
#define STMPE24XX_PWMIC2 0x3a
|
|
|
|
#define STMPE_PWM_24XX_PINBASE 21
|
|
|
|
struct stmpe_pwm {
|
|
struct stmpe *stmpe;
|
|
struct pwm_chip chip;
|
|
u8 last_duty;
|
|
};
|
|
|
|
static inline struct stmpe_pwm *to_stmpe_pwm(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct stmpe_pwm, chip);
|
|
}
|
|
|
|
static int stmpe_24xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
|
|
u8 value;
|
|
int ret;
|
|
|
|
ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "error reading PWM#%u control\n",
|
|
pwm->hwpwm);
|
|
return ret;
|
|
}
|
|
|
|
value = ret | BIT(pwm->hwpwm);
|
|
|
|
ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
|
|
if (ret) {
|
|
dev_err(chip->dev, "error writing PWM#%u control\n",
|
|
pwm->hwpwm);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stmpe_24xx_pwm_disable(struct pwm_chip *chip,
|
|
struct pwm_device *pwm)
|
|
{
|
|
struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
|
|
u8 value;
|
|
int ret;
|
|
|
|
ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
|
|
if (ret < 0) {
|
|
dev_err(chip->dev, "error reading PWM#%u control\n",
|
|
pwm->hwpwm);
|
|
return;
|
|
}
|
|
|
|
value = ret & ~BIT(pwm->hwpwm);
|
|
|
|
ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
|
|
if (ret) {
|
|
dev_err(chip->dev, "error writing PWM#%u control\n",
|
|
pwm->hwpwm);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* STMPE 24xx PWM instructions */
|
|
#define SMAX 0x007f
|
|
#define SMIN 0x00ff
|
|
#define GTS 0x0000
|
|
#define LOAD BIT(14) /* Only available on 2403 */
|
|
#define RAMPUP 0x0000
|
|
#define RAMPDOWN BIT(7)
|
|
#define PRESCALE_512 BIT(14)
|
|
#define STEPTIME_1 BIT(8)
|
|
#define BRANCH (BIT(15) | BIT(13))
|
|
|
|
static int stmpe_24xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
|
|
unsigned int i, pin;
|
|
u16 program[3] = {
|
|
SMAX,
|
|
GTS,
|
|
GTS,
|
|
};
|
|
u8 offset;
|
|
int ret;
|
|
|
|
/* Make sure we are disabled */
|
|
if (pwm_is_enabled(pwm)) {
|
|
stmpe_24xx_pwm_disable(chip, pwm);
|
|
} else {
|
|
/* Connect the PWM to the pin */
|
|
pin = pwm->hwpwm;
|
|
|
|
/* On STMPE2401 and 2403 pins 21,22,23 are used */
|
|
if (stmpe_pwm->stmpe->partnum == STMPE2401 ||
|
|
stmpe_pwm->stmpe->partnum == STMPE2403)
|
|
pin += STMPE_PWM_24XX_PINBASE;
|
|
|
|
ret = stmpe_set_altfunc(stmpe_pwm->stmpe, BIT(pin),
|
|
STMPE_BLOCK_PWM);
|
|
if (ret) {
|
|
dev_err(chip->dev, "unable to connect PWM#%u to pin\n",
|
|
pwm->hwpwm);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* STMPE24XX */
|
|
switch (pwm->hwpwm) {
|
|
case 0:
|
|
offset = STMPE24XX_PWMIC0;
|
|
break;
|
|
|
|
case 1:
|
|
offset = STMPE24XX_PWMIC1;
|
|
break;
|
|
|
|
case 2:
|
|
offset = STMPE24XX_PWMIC2;
|
|
break;
|
|
|
|
default:
|
|
/* Should not happen as npwm is 3 */
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_dbg(chip->dev, "PWM#%u: config duty %d ns, period %d ns\n",
|
|
pwm->hwpwm, duty_ns, period_ns);
|
|
|
|
if (duty_ns == 0) {
|
|
if (stmpe_pwm->stmpe->partnum == STMPE2401)
|
|
program[0] = SMAX; /* off all the time */
|
|
|
|
if (stmpe_pwm->stmpe->partnum == STMPE2403)
|
|
program[0] = LOAD | 0xff; /* LOAD 0xff */
|
|
|
|
stmpe_pwm->last_duty = 0x00;
|
|
} else if (duty_ns == period_ns) {
|
|
if (stmpe_pwm->stmpe->partnum == STMPE2401)
|
|
program[0] = SMIN; /* on all the time */
|
|
|
|
if (stmpe_pwm->stmpe->partnum == STMPE2403)
|
|
program[0] = LOAD | 0x00; /* LOAD 0x00 */
|
|
|
|
stmpe_pwm->last_duty = 0xff;
|
|
} else {
|
|
u8 value, last = stmpe_pwm->last_duty;
|
|
unsigned long duty;
|
|
|
|
/*
|
|
* Counter goes from 0x00 to 0xff repeatedly at 32768 Hz,
|
|
* (means a period of 30517 ns) then this is compared to the
|
|
* counter from the ramp, if this is >= PWM counter the output
|
|
* is high. With LOAD we can define how much of the cycle it
|
|
* is on.
|
|
*
|
|
* Prescale = 0 -> 2 kHz -> T = 1/f = 488281.25 ns
|
|
*/
|
|
|
|
/* Scale to 0..0xff */
|
|
duty = duty_ns * 256;
|
|
duty = DIV_ROUND_CLOSEST(duty, period_ns);
|
|
value = duty;
|
|
|
|
if (value == last) {
|
|
/* Run the old program */
|
|
if (pwm_is_enabled(pwm))
|
|
stmpe_24xx_pwm_enable(chip, pwm);
|
|
|
|
return 0;
|
|
} else if (stmpe_pwm->stmpe->partnum == STMPE2403) {
|
|
/* STMPE2403 can simply set the right PWM value */
|
|
program[0] = LOAD | value;
|
|
program[1] = 0x0000;
|
|
} else if (stmpe_pwm->stmpe->partnum == STMPE2401) {
|
|
/* STMPE2401 need a complex program */
|
|
u16 incdec = 0x0000;
|
|
|
|
if (last < value)
|
|
/* Count up */
|
|
incdec = RAMPUP | (value - last);
|
|
else
|
|
/* Count down */
|
|
incdec = RAMPDOWN | (last - value);
|
|
|
|
/* Step to desired value, smoothly */
|
|
program[0] = PRESCALE_512 | STEPTIME_1 | incdec;
|
|
|
|
/* Loop eternally to 0x00 */
|
|
program[1] = BRANCH;
|
|
}
|
|
|
|
dev_dbg(chip->dev,
|
|
"PWM#%u: value = %02x, last_duty = %02x, program=%04x,%04x,%04x\n",
|
|
pwm->hwpwm, value, last, program[0], program[1],
|
|
program[2]);
|
|
stmpe_pwm->last_duty = value;
|
|
}
|
|
|
|
/*
|
|
* We can write programs of up to 64 16-bit words into this channel.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(program); i++) {
|
|
u8 value;
|
|
|
|
value = (program[i] >> 8) & 0xff;
|
|
|
|
ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
|
|
if (ret) {
|
|
dev_err(chip->dev, "error writing register %02x: %d\n",
|
|
offset, ret);
|
|
return ret;
|
|
}
|
|
|
|
value = program[i] & 0xff;
|
|
|
|
ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
|
|
if (ret) {
|
|
dev_err(chip->dev, "error writing register %02x: %d\n",
|
|
offset, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* If we were enabled, re-enable this PWM */
|
|
if (pwm_is_enabled(pwm))
|
|
stmpe_24xx_pwm_enable(chip, pwm);
|
|
|
|
/* Sleep for 200ms so we're sure it will take effect */
|
|
msleep(200);
|
|
|
|
dev_dbg(chip->dev, "programmed PWM#%u, %u bytes\n", pwm->hwpwm, i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops stmpe_24xx_pwm_ops = {
|
|
.config = stmpe_24xx_pwm_config,
|
|
.enable = stmpe_24xx_pwm_enable,
|
|
.disable = stmpe_24xx_pwm_disable,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int __init stmpe_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
|
|
struct stmpe_pwm *pwm;
|
|
int ret;
|
|
|
|
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
|
|
if (!pwm)
|
|
return -ENOMEM;
|
|
|
|
pwm->stmpe = stmpe;
|
|
pwm->chip.dev = &pdev->dev;
|
|
pwm->chip.base = -1;
|
|
|
|
if (stmpe->partnum == STMPE2401 || stmpe->partnum == STMPE2403) {
|
|
pwm->chip.ops = &stmpe_24xx_pwm_ops;
|
|
pwm->chip.npwm = 3;
|
|
} else {
|
|
if (stmpe->partnum == STMPE1601)
|
|
dev_err(&pdev->dev, "STMPE1601 not yet supported\n");
|
|
else
|
|
dev_err(&pdev->dev, "Unknown STMPE PWM\n");
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = stmpe_enable(stmpe, STMPE_BLOCK_PWM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pwmchip_add(&pwm->chip);
|
|
if (ret) {
|
|
stmpe_disable(stmpe, STMPE_BLOCK_PWM);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pwm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver stmpe_pwm_driver = {
|
|
.driver = {
|
|
.name = "stmpe-pwm",
|
|
},
|
|
};
|
|
builtin_platform_driver_probe(stmpe_pwm_driver, stmpe_pwm_probe);
|