mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 13:05:03 +08:00
7ebd8b66dd
Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
56 lines
1.2 KiB
ReStructuredText
56 lines
1.2 KiB
ReStructuredText
Kernel driver ltc4151
|
|
=====================
|
|
|
|
Supported chips:
|
|
|
|
* Linear Technology LTC4151
|
|
|
|
Prefix: 'ltc4151'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet:
|
|
|
|
http://www.linear.com/docs/Datasheet/4151fc.pdf
|
|
|
|
Author: Per Dalen <per.dalen@appeartv.com>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
The LTC4151 is a High Voltage I2C Current and Voltage Monitor.
|
|
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not probe for LTC4151 devices, since there is no register
|
|
which can be safely used to identify the chip. You will have to instantiate
|
|
the devices explicitly.
|
|
|
|
Example: the following will load the driver for an LTC4151 at address 0x6f
|
|
on I2C bus #0::
|
|
|
|
# modprobe ltc4151
|
|
# echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device
|
|
|
|
|
|
Sysfs entries
|
|
-------------
|
|
|
|
Voltage readings provided by this driver are reported as obtained from the ADIN
|
|
and VIN registers.
|
|
|
|
Current reading provided by this driver is reported as obtained from the Current
|
|
Sense register. The reported value assumes that a 1 mOhm sense resistor is
|
|
installed.
|
|
|
|
======================= ==================
|
|
in1_input VDIN voltage (mV)
|
|
|
|
in2_input ADIN voltage (mV)
|
|
|
|
curr1_input SENSE current (mA)
|
|
======================= ==================
|