linux/drivers/soc/qcom/qcom_gsbi.c
Andy Gross e5fdad68d4 soc: qcom: gsbi: Add support for ADM CRCI muxing
This patch adds automatic configuration for the ADM CRCI muxing required to
support DMA operations for GSBI clients.  The GSBI mode and instance determine
the correct TCSR ADM CRCI MUX value that must be programmed so that the DMA
works properly.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-11 15:18:39 -05:00

257 lines
6.4 KiB
C

/*
* Copyright (c) 2014, The Linux foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License rev 2 and
* only rev 2 as published by the free Software foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#define GSBI_CTRL_REG 0x0000
#define GSBI_PROTOCOL_SHIFT 4
#define MAX_GSBI 12
#define TCSR_ADM_CRCI_BASE 0x70
struct crci_config {
u32 num_rows;
const u32 (*array)[MAX_GSBI];
};
static const u32 crci_ipq8064[][MAX_GSBI] = {
{
0x000003, 0x00000c, 0x000030, 0x0000c0,
0x000300, 0x000c00, 0x003000, 0x00c000,
0x030000, 0x0c0000, 0x300000, 0xc00000
},
{
0x000003, 0x00000c, 0x000030, 0x0000c0,
0x000300, 0x000c00, 0x003000, 0x00c000,
0x030000, 0x0c0000, 0x300000, 0xc00000
},
};
static const struct crci_config config_ipq8064 = {
.num_rows = ARRAY_SIZE(crci_ipq8064),
.array = crci_ipq8064,
};
static const unsigned int crci_apq8064[][MAX_GSBI] = {
{
0x001800, 0x006000, 0x000030, 0x0000c0,
0x000300, 0x000400, 0x000000, 0x000000,
0x000000, 0x000000, 0x000000, 0x000000
},
{
0x000000, 0x000000, 0x000000, 0x000000,
0x000000, 0x000020, 0x0000c0, 0x000000,
0x000000, 0x000000, 0x000000, 0x000000
},
};
static const struct crci_config config_apq8064 = {
.num_rows = ARRAY_SIZE(crci_apq8064),
.array = crci_apq8064,
};
static const unsigned int crci_msm8960[][MAX_GSBI] = {
{
0x000003, 0x00000c, 0x000030, 0x0000c0,
0x000300, 0x000400, 0x000000, 0x000000,
0x000000, 0x000000, 0x000000, 0x000000
},
{
0x000000, 0x000000, 0x000000, 0x000000,
0x000000, 0x000020, 0x0000c0, 0x000300,
0x001800, 0x006000, 0x000000, 0x000000
},
};
static const struct crci_config config_msm8960 = {
.num_rows = ARRAY_SIZE(crci_msm8960),
.array = crci_msm8960,
};
static const unsigned int crci_msm8660[][MAX_GSBI] = {
{ /* ADM 0 - B */
0x000003, 0x00000c, 0x000030, 0x0000c0,
0x000300, 0x000c00, 0x003000, 0x00c000,
0x030000, 0x0c0000, 0x300000, 0xc00000
},
{ /* ADM 0 - B */
0x000003, 0x00000c, 0x000030, 0x0000c0,
0x000300, 0x000c00, 0x003000, 0x00c000,
0x030000, 0x0c0000, 0x300000, 0xc00000
},
{ /* ADM 1 - A */
0x000003, 0x00000c, 0x000030, 0x0000c0,
0x000300, 0x000c00, 0x003000, 0x00c000,
0x030000, 0x0c0000, 0x300000, 0xc00000
},
{ /* ADM 1 - B */
0x000003, 0x00000c, 0x000030, 0x0000c0,
0x000300, 0x000c00, 0x003000, 0x00c000,
0x030000, 0x0c0000, 0x300000, 0xc00000
},
};
static const struct crci_config config_msm8660 = {
.num_rows = ARRAY_SIZE(crci_msm8660),
.array = crci_msm8660,
};
struct gsbi_info {
struct clk *hclk;
u32 mode;
u32 crci;
struct regmap *tcsr;
};
static const struct of_device_id tcsr_dt_match[] = {
{ .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064},
{ .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064},
{ .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960},
{ .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660},
{ },
};
static int gsbi_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *tcsr_node;
const struct of_device_id *match;
struct resource *res;
void __iomem *base;
struct gsbi_info *gsbi;
int i;
u32 mask, gsbi_num;
const struct crci_config *config = NULL;
gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL);
if (!gsbi)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
/* get the tcsr node and setup the config and regmap */
gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
if (!IS_ERR(gsbi->tcsr)) {
tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0);
if (tcsr_node) {
match = of_match_node(tcsr_dt_match, tcsr_node);
if (match)
config = match->data;
else
dev_warn(&pdev->dev, "no matching TCSR\n");
of_node_put(tcsr_node);
}
}
if (of_property_read_u32(node, "cell-index", &gsbi_num)) {
dev_err(&pdev->dev, "missing cell-index\n");
return -EINVAL;
}
if (gsbi_num < 1 || gsbi_num > MAX_GSBI) {
dev_err(&pdev->dev, "invalid cell-index\n");
return -EINVAL;
}
if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) {
dev_err(&pdev->dev, "missing mode configuration\n");
return -EINVAL;
}
/* not required, so default to 0 if not present */
of_property_read_u32(node, "qcom,crci", &gsbi->crci);
dev_info(&pdev->dev, "GSBI port protocol: %d crci: %d\n",
gsbi->mode, gsbi->crci);
gsbi->hclk = devm_clk_get(&pdev->dev, "iface");
if (IS_ERR(gsbi->hclk))
return PTR_ERR(gsbi->hclk);
clk_prepare_enable(gsbi->hclk);
writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci,
base + GSBI_CTRL_REG);
/*
* modify tcsr to reflect mode and ADM CRCI mux
* Each gsbi contains a pair of bits, one for RX and one for TX
* SPI mode requires both bits cleared, otherwise they are set
*/
if (config) {
for (i = 0; i < config->num_rows; i++) {
mask = config->array[i][gsbi_num - 1];
if (gsbi->mode == GSBI_PROT_SPI)
regmap_update_bits(gsbi->tcsr,
TCSR_ADM_CRCI_BASE + 4 * i, mask, 0);
else
regmap_update_bits(gsbi->tcsr,
TCSR_ADM_CRCI_BASE + 4 * i, mask, mask);
}
}
/* make sure the gsbi control write is not reordered */
wmb();
platform_set_drvdata(pdev, gsbi);
return of_platform_populate(node, NULL, NULL, &pdev->dev);
}
static int gsbi_remove(struct platform_device *pdev)
{
struct gsbi_info *gsbi = platform_get_drvdata(pdev);
clk_disable_unprepare(gsbi->hclk);
return 0;
}
static const struct of_device_id gsbi_dt_match[] = {
{ .compatible = "qcom,gsbi-v1.0.0", },
{ },
};
MODULE_DEVICE_TABLE(of, gsbi_dt_match);
static struct platform_driver gsbi_driver = {
.driver = {
.name = "gsbi",
.of_match_table = gsbi_dt_match,
},
.probe = gsbi_probe,
.remove = gsbi_remove,
};
module_platform_driver(gsbi_driver);
MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
MODULE_DESCRIPTION("QCOM GSBI driver");
MODULE_LICENSE("GPL v2");