mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
c64daf3600
Add SoC-glue clock source selector for ahci controller on UniPhier SoCs. Currently this supports Pro4 only. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1634000035-3114-6-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
350 lines
14 KiB
C
350 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2016 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
|
|
#include "clk-uniphier.h"
|
|
|
|
#define UNIPHIER_LD4_SYS_CLK_SD \
|
|
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 8), \
|
|
UNIPHIER_CLK_FACTOR("sd-133m", -1, "vpll27a", 1, 2)
|
|
|
|
#define UNIPHIER_PRO5_SYS_CLK_SD \
|
|
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 12), \
|
|
UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 18)
|
|
|
|
#define UNIPHIER_LD20_SYS_CLK_SD \
|
|
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10), \
|
|
UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
|
|
|
|
#define UNIPHIER_NX1_SYS_CLK_SD \
|
|
UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 4), \
|
|
UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 6)
|
|
|
|
#define UNIPHIER_LD4_SYS_CLK_NAND(idx) \
|
|
UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32), \
|
|
UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
|
|
|
|
#define UNIPHIER_PRO5_SYS_CLK_NAND(idx) \
|
|
UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 48), \
|
|
UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_NAND(idx) \
|
|
UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 40), \
|
|
UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x210c, 0)
|
|
|
|
#define UNIPHIER_SYS_CLK_NAND_4X(idx) \
|
|
UNIPHIER_CLK_FACTOR("nand-4x", (idx), "nand", 4, 1)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_EMMC(idx) \
|
|
UNIPHIER_CLK_GATE("emmc", (idx), NULL, 0x210c, 2)
|
|
|
|
#define UNIPHIER_LD4_SYS_CLK_STDMAC(idx) \
|
|
UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_STDMAC(idx) \
|
|
UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x210c, 8)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_HSC(idx) \
|
|
UNIPHIER_CLK_GATE("hsc", (idx), NULL, 0x210c, 9)
|
|
|
|
#define UNIPHIER_PRO4_SYS_CLK_GIO(idx) \
|
|
UNIPHIER_CLK_GATE("gio", (idx), NULL, 0x2104, 6)
|
|
|
|
#define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch) \
|
|
UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
|
|
|
|
#define UNIPHIER_PRO4_SYS_CLK_AIO(idx) \
|
|
UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 8), \
|
|
UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
|
|
|
|
#define UNIPHIER_PRO5_SYS_CLK_AIO(idx) \
|
|
UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 12), \
|
|
UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_AIO(idx) \
|
|
UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 10), \
|
|
UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2108, 0)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_EVEA(idx) \
|
|
UNIPHIER_CLK_FACTOR("evea-io100m", -1, "spll", 1, 20), \
|
|
UNIPHIER_CLK_GATE("evea", (idx), "evea-io100m", 0x2108, 1)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_EXIV(idx) \
|
|
UNIPHIER_CLK_FACTOR("exiv-io200m", -1, "spll", 1, 10), \
|
|
UNIPHIER_CLK_GATE("exiv", (idx), "exiv-io200m", 0x2110, 2)
|
|
|
|
#define UNIPHIER_PRO4_SYS_CLK_ETHER(idx) \
|
|
UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
|
|
|
|
#define UNIPHIER_LD11_SYS_CLK_ETHER(idx) \
|
|
UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x210c, 6)
|
|
|
|
const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1), /* 1597.44 MHz */
|
|
UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512), /* 288 MHz */
|
|
UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1), /* 589.824 MHz */
|
|
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512), /* 270 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
|
|
UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
|
|
UNIPHIER_LD4_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_LD4_SYS_CLK_SD,
|
|
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
|
|
UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1), /* 1600 MHz */
|
|
UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25), /* 288 MHz */
|
|
UNIPHIER_CLK_FACTOR("a2pll", -1, "upll", 256, 125), /* 589.824 MHz */
|
|
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
|
|
UNIPHIER_CLK_FACTOR("gpll", -1, "ref", 10, 1), /* 250 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
|
|
UNIPHIER_CLK_FACTOR("spi", 1, "spll", 1, 32),
|
|
UNIPHIER_LD4_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_LD4_SYS_CLK_SD,
|
|
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
|
|
UNIPHIER_PRO4_SYS_CLK_ETHER(6),
|
|
UNIPHIER_CLK_GATE("ether-gb", 7, "gpll", 0x2104, 5),
|
|
UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* HSC, MIO, RLE */
|
|
UNIPHIER_CLK_GATE("ether-phy", 10, "ref", 0x2260, 0),
|
|
UNIPHIER_PRO4_SYS_CLK_GIO(12), /* Ether, SATA, USB3 */
|
|
UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
|
|
UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
|
|
UNIPHIER_CLK_FACTOR("usb30-hsphy0", 16, "upll", 1, 12),
|
|
UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
|
|
UNIPHIER_CLK_FACTOR("usb31-ssphy0", 20, "ref", 1, 1),
|
|
UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 18),
|
|
UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x2104, 19),
|
|
UNIPHIER_PRO4_SYS_CLK_AIO(40),
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1), /* 1600 MHz */
|
|
UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25), /* 288 MHz */
|
|
UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25), /* 270 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
|
|
UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
|
|
UNIPHIER_LD4_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_LD4_SYS_CLK_SD,
|
|
UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
|
|
UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* Ether, HSC, MIO */
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1), /* 2400 MHz */
|
|
UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1), /* 2560 MHz */
|
|
UNIPHIER_CLK_FACTOR("dapll2", -1, "dapll1", 144, 125), /* 2949.12 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "dapll2", 1, 40),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
|
|
UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
|
|
UNIPHIER_PRO5_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_PRO5_SYS_CLK_SD,
|
|
UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* HSC */
|
|
UNIPHIER_PRO4_SYS_CLK_GIO(12), /* PCIe, USB3 */
|
|
UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
|
|
UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
|
|
UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x2108, 2),
|
|
UNIPHIER_PRO5_SYS_CLK_AIO(40),
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1), /* 2400 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
|
|
UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
|
|
UNIPHIER_PRO5_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_PRO5_SYS_CLK_SD,
|
|
UNIPHIER_PRO4_SYS_CLK_ETHER(6),
|
|
UNIPHIER_LD4_SYS_CLK_STDMAC(8), /* HSC, RLE */
|
|
/* GIO is always clock-enabled: no function for 0x2104 bit6 */
|
|
UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
|
|
UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
|
|
/* The document mentions 0x2104 bit 18, but not functional */
|
|
UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x2104, 19),
|
|
UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
|
|
UNIPHIER_CLK_FACTOR("usb30-ssphy1", 18, "ref", 1, 1),
|
|
UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x2104, 20),
|
|
UNIPHIER_CLK_FACTOR("usb31-ssphy0", 21, "ref", 1, 1),
|
|
UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 22),
|
|
UNIPHIER_PRO5_SYS_CLK_AIO(40),
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 392, 5), /* 1960 MHz */
|
|
UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1), /* 1600 MHz */
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
|
|
UNIPHIER_CLK_FACTOR("vspll", -1, "ref", 80, 1), /* 2000 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
|
|
UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
|
|
UNIPHIER_LD11_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_LD11_SYS_CLK_EMMC(4),
|
|
/* Index 5 reserved for eMMC PHY */
|
|
UNIPHIER_LD11_SYS_CLK_ETHER(6),
|
|
UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC, MIO */
|
|
UNIPHIER_LD11_SYS_CLK_HSC(9),
|
|
UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
|
|
UNIPHIER_LD11_SYS_CLK_AIO(40),
|
|
UNIPHIER_LD11_SYS_CLK_EVEA(41),
|
|
UNIPHIER_LD11_SYS_CLK_EXIV(42),
|
|
/* CPU gears */
|
|
UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_DIV3("spll", 3, 4, 8),
|
|
/* Note: both gear1 and gear4 are spll/4. This is not a bug. */
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
|
|
"cpll/2", "spll/4", "cpll/3", "spll/3",
|
|
"spll/4", "spll/8", "cpll/4", "cpll/8"),
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
|
|
"mpll/2", "spll/4", "mpll/3", "spll/3",
|
|
"spll/4", "spll/8", "mpll/4", "mpll/8"),
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 88, 1), /* ARM: 2200 MHz */
|
|
UNIPHIER_CLK_FACTOR("gppll", -1, "ref", 52, 1), /* Mali: 1300 MHz */
|
|
UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1), /* Codec: 1600 MHz */
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
|
|
UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1), /* IPP: 2200 MHz */
|
|
UNIPHIER_CLK_FACTOR("vppll", -1, "ref", 504, 5), /* 2520 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
|
|
UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
|
|
UNIPHIER_LD11_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_LD11_SYS_CLK_EMMC(4),
|
|
/* Index 5 reserved for eMMC PHY */
|
|
UNIPHIER_LD20_SYS_CLK_SD,
|
|
UNIPHIER_LD11_SYS_CLK_ETHER(6),
|
|
UNIPHIER_LD11_SYS_CLK_STDMAC(8), /* HSC */
|
|
UNIPHIER_LD11_SYS_CLK_HSC(9),
|
|
/* GIO is always clock-enabled: no function for 0x210c bit5 */
|
|
/*
|
|
* clock for USB Link is enabled by the logic "OR" of bit 14 and bit 15.
|
|
* We do not use bit 15 here.
|
|
*/
|
|
UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
|
|
UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 12),
|
|
UNIPHIER_CLK_GATE("usb30-hsphy1", 17, NULL, 0x210c, 13),
|
|
UNIPHIER_CLK_FACTOR("usb30-ssphy0", 18, "ref", 1, 1),
|
|
UNIPHIER_CLK_FACTOR("usb30-ssphy1", 19, "ref", 1, 1),
|
|
UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 4),
|
|
UNIPHIER_LD11_SYS_CLK_AIO(40),
|
|
UNIPHIER_LD11_SYS_CLK_EVEA(41),
|
|
UNIPHIER_LD11_SYS_CLK_EXIV(42),
|
|
/* CPU gears */
|
|
UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ca72", 32, 0x8000, 0xf, 8,
|
|
"cpll/2", "spll/2", "cpll/3", "spll/3",
|
|
"spll/4", "spll/8", "cpll/4", "cpll/8"),
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
|
|
"cpll/2", "spll/2", "cpll/3", "spll/3",
|
|
"spll/4", "spll/8", "cpll/4", "cpll/8"),
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
|
|
"s2pll/2", "spll/2", "s2pll/3", "spll/3",
|
|
"spll/4", "spll/8", "s2pll/4", "s2pll/8"),
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 104, 1), /* ARM: 2600 MHz */
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1), /* 2000 MHz */
|
|
UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1), /* IPP: 2400 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
|
|
UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
|
|
UNIPHIER_LD20_SYS_CLK_SD,
|
|
UNIPHIER_LD11_SYS_CLK_NAND(2),
|
|
UNIPHIER_SYS_CLK_NAND_4X(3),
|
|
UNIPHIER_LD11_SYS_CLK_EMMC(4),
|
|
UNIPHIER_CLK_GATE("ether0", 6, NULL, 0x210c, 9),
|
|
UNIPHIER_CLK_GATE("ether1", 7, NULL, 0x210c, 10),
|
|
UNIPHIER_CLK_GATE("usb30", 12, NULL, 0x210c, 4), /* =GIO0 */
|
|
UNIPHIER_CLK_GATE("usb31-0", 13, NULL, 0x210c, 5), /* =GIO1 */
|
|
UNIPHIER_CLK_GATE("usb31-1", 14, NULL, 0x210c, 6), /* =GIO1-1 */
|
|
UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 16),
|
|
UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 18),
|
|
UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 20),
|
|
UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x210c, 17),
|
|
UNIPHIER_CLK_GATE("usb31-ssphy0", 21, NULL, 0x210c, 19),
|
|
UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 3),
|
|
UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7),
|
|
UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8),
|
|
UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21),
|
|
UNIPHIER_LD11_SYS_CLK_AIO(40),
|
|
UNIPHIER_LD11_SYS_CLK_EXIV(42),
|
|
/* CPU gears */
|
|
UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
|
|
"cpll/2", "spll/2", "cpll/3", "spll/3",
|
|
"spll/4", "spll/8", "cpll/4", "cpll/8"),
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
|
|
"s2pll/2", "spll/2", "s2pll/3", "spll/3",
|
|
"spll/4", "spll/8", "s2pll/4", "s2pll/8"),
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = {
|
|
UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 100, 1), /* ARM: 2500 MHz */
|
|
UNIPHIER_CLK_FACTOR("spll", -1, "ref", 32, 1), /* 800 MHz */
|
|
UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 6),
|
|
UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
|
|
UNIPHIER_NX1_SYS_CLK_SD,
|
|
UNIPHIER_CLK_GATE("emmc", 4, NULL, 0x2108, 8),
|
|
UNIPHIER_CLK_GATE("ether", 6, NULL, 0x210c, 0),
|
|
UNIPHIER_CLK_GATE("usb30-0", 12, NULL, 0x210c, 16), /* =GIO */
|
|
UNIPHIER_CLK_GATE("usb30-1", 13, NULL, 0x210c, 20), /* =GIO1P */
|
|
UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 24),
|
|
UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 25),
|
|
UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 26),
|
|
UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 8),
|
|
UNIPHIER_CLK_GATE("voc", 52, NULL, 0x2110, 0),
|
|
UNIPHIER_CLK_GATE("hdmitx", 58, NULL, 0x2110, 8),
|
|
/* CPU gears */
|
|
UNIPHIER_CLK_DIV5("cpll", 2, 4, 8, 16, 32),
|
|
UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 5,
|
|
"cpll/2", "cpll/4", "cpll/8", "cpll/16",
|
|
"cpll/32"),
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
const struct uniphier_clk_data uniphier_pro4_sg_clk_data[] = {
|
|
UNIPHIER_CLK_DIV("gpll", 4),
|
|
{
|
|
.name = "sata-ref",
|
|
.type = UNIPHIER_CLK_TYPE_MUX,
|
|
.idx = 0,
|
|
.data.mux = {
|
|
.parent_names = { "gpll/4", "ref", },
|
|
.num_parents = 2,
|
|
.reg = 0x1a28,
|
|
.masks = { 0x1, 0x1, },
|
|
.vals = { 0x0, 0x1, },
|
|
},
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|