linux/arch/x86/pci/xen.c
Boris Ostrovsky 84d582d236 xen: Revert commits da72ff5bfc and 72a9b18629
Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741)
established that commit 72a9b18629 ("xen: Remove event channel
notification through Xen PCI platform device") (and thus commit
da72ff5bfc ("partially revert "xen: Remove event channel
notification through Xen PCI platform device"")) are unnecessary and,
in fact, prevent HVM guests from booting on Xen releases prior to 4.0

Therefore we revert both of those commits.

The summary of that discussion is below:

  Here is the brief summary of the current situation:

  Before the offending commit (72a9b18629):

  1) INTx does not work because of the reset_watches path.
  2) The reset_watches path is only taken if you have Xen > 4.0
  3) The Linux Kernel by default will use vector inject if the hypervisor
     support. So even INTx does not work no body running the kernel with
     Xen > 4.0 would notice. Unless he explicitly disabled this feature
     either in the kernel or in Xen (and this can only be disabled by
     modifying the code, not user-supported way to do it).

  After the offending commit (+ partial revert):

  1) INTx is no longer support for HVM (only for PV guests).
  2) Any HVM guest The kernel will not boot on Xen < 4.0 which does
     not have vector injection support. Since the only other mode
     supported is INTx which.

  So based on this summary, I think before commit (72a9b18629) we were
  in much better position from a user point of view.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02 11:18:05 +02:00

579 lines
14 KiB
C

/*
* Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and
* initial domain support. We also handle the DSDT _PRT callbacks for GSI's
* used in HVM and initial domain mode (PV does not parse ACPI, so it has no
* concept of GSIs). Under PV we hook under the pnbbios API for IRQs and
* 0xcf8 PCI configuration read/write.
*
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
* Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* Stefano Stabellini <stefano.stabellini@eu.citrix.com>
*/
#include <linux/export.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <asm/io_apic.h>
#include <asm/pci_x86.h>
#include <asm/xen/hypervisor.h>
#include <xen/features.h>
#include <xen/events.h>
#include <asm/xen/pci.h>
#include <asm/xen/cpuid.h>
#include <asm/apic.h>
#include <asm/i8259.h>
static int xen_pcifront_enable_irq(struct pci_dev *dev)
{
int rc;
int share = 1;
int pirq;
u8 gsi;
rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
if (rc < 0) {
dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
rc);
return rc;
}
/* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
pirq = gsi;
if (gsi < nr_legacy_irqs())
share = 0;
rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
if (rc < 0) {
dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
gsi, pirq, rc);
return rc;
}
dev->irq = rc;
dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
return 0;
}
#ifdef CONFIG_ACPI
static int xen_register_pirq(u32 gsi, int gsi_override, int triggering,
bool set_pirq)
{
int rc, pirq = -1, irq = -1;
struct physdev_map_pirq map_irq;
int shareable = 0;
char *name;
irq = xen_irq_from_gsi(gsi);
if (irq > 0)
return irq;
if (set_pirq)
pirq = gsi;
map_irq.domid = DOMID_SELF;
map_irq.type = MAP_PIRQ_TYPE_GSI;
map_irq.index = gsi;
map_irq.pirq = pirq;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
if (rc) {
printk(KERN_WARNING "xen map irq failed %d\n", rc);
return -1;
}
if (triggering == ACPI_EDGE_SENSITIVE) {
shareable = 0;
name = "ioapic-edge";
} else {
shareable = 1;
name = "ioapic-level";
}
if (gsi_override >= 0)
gsi = gsi_override;
irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
if (irq < 0)
goto out;
printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
out:
return irq;
}
static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
int trigger, int polarity)
{
if (!xen_hvm_domain())
return -1;
return xen_register_pirq(gsi, -1 /* no GSI override */, trigger,
false /* no mapping of GSI to PIRQ */);
}
#ifdef CONFIG_XEN_DOM0
static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
{
int rc, irq;
struct physdev_setup_gsi setup_gsi;
if (!xen_pv_domain())
return -1;
printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
gsi, triggering, polarity);
irq = xen_register_pirq(gsi, gsi_override, triggering, true);
setup_gsi.gsi = gsi;
setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
if (rc == -EEXIST)
printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
else if (rc) {
printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
gsi, rc);
}
return irq;
}
static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
int trigger, int polarity)
{
return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
}
#endif
#endif
#if defined(CONFIG_PCI_MSI)
#include <linux/msi.h>
#include <asm/msidef.h>
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);
static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int irq, ret, i;
struct msi_desc *msidesc;
int *v;
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
if (!v)
return -ENOMEM;
if (type == PCI_CAP_ID_MSIX)
ret = xen_pci_frontend_enable_msix(dev, v, nvec);
else
ret = xen_pci_frontend_enable_msi(dev, v);
if (ret)
goto error;
i = 0;
for_each_pci_msi_entry(msidesc, dev) {
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i],
(type == PCI_CAP_ID_MSI) ? nvec : 1,
(type == PCI_CAP_ID_MSIX) ?
"pcifront-msi-x" :
"pcifront-msi",
DOMID_SELF);
if (irq < 0) {
ret = irq;
goto free;
}
i++;
}
kfree(v);
return 0;
error:
if (ret == -ENOSYS)
dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
else if (ret)
dev_err(&dev->dev, "Xen PCI frontend error: %d!\n", ret);
free:
kfree(v);
return ret;
}
#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
struct msi_msg *msg)
{
/* We set vector == 0 to tell the hypervisor we don't care about it,
* but we want a pirq setup instead.
* We use the dest_id field to pass the pirq that we want. */
msg->address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(pirq);
msg->address_lo =
MSI_ADDR_BASE_LO |
MSI_ADDR_DEST_MODE_PHYSICAL |
MSI_ADDR_REDIRECTION_CPU |
MSI_ADDR_DEST_ID(pirq);
msg->data = XEN_PIRQ_MSI_DATA;
}
static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int irq, pirq;
struct msi_desc *msidesc;
struct msi_msg msg;
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
for_each_pci_msi_entry(msidesc, dev) {
pirq = xen_allocate_pirq_msi(dev, msidesc);
if (pirq < 0) {
irq = -ENODEV;
goto error;
}
xen_msi_compose_msg(dev, pirq, &msg);
__pci_write_msi_msg(msidesc, &msg);
dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq);
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq,
(type == PCI_CAP_ID_MSI) ? nvec : 1,
(type == PCI_CAP_ID_MSIX) ?
"msi-x" : "msi",
DOMID_SELF);
if (irq < 0)
goto error;
dev_dbg(&dev->dev,
"xen: msi --> pirq=%d --> irq=%d\n", pirq, irq);
}
return 0;
error:
dev_err(&dev->dev, "Failed to create MSI%s! ret=%d!\n",
type == PCI_CAP_ID_MSI ? "" : "-X", irq);
return irq;
}
#ifdef CONFIG_XEN_DOM0
static bool __read_mostly pci_seg_supported = true;
static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int ret = 0;
struct msi_desc *msidesc;
for_each_pci_msi_entry(msidesc, dev) {
struct physdev_map_pirq map_irq;
domid_t domid;
domid = ret = xen_find_device_domain_owner(dev);
/* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
* hence check ret value for < 0. */
if (ret < 0)
domid = DOMID_SELF;
memset(&map_irq, 0, sizeof(map_irq));
map_irq.domid = domid;
map_irq.type = MAP_PIRQ_TYPE_MSI_SEG;
map_irq.index = -1;
map_irq.pirq = -1;
map_irq.bus = dev->bus->number |
(pci_domain_nr(dev->bus) << 16);
map_irq.devfn = dev->devfn;
if (type == PCI_CAP_ID_MSI && nvec > 1) {
map_irq.type = MAP_PIRQ_TYPE_MULTI_MSI;
map_irq.entry_nr = nvec;
} else if (type == PCI_CAP_ID_MSIX) {
int pos;
unsigned long flags;
u32 table_offset, bir;
pos = dev->msix_cap;
pci_read_config_dword(dev, pos + PCI_MSIX_TABLE,
&table_offset);
bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR);
flags = pci_resource_flags(dev, bir);
if (!flags || (flags & IORESOURCE_UNSET))
return -EINVAL;
map_irq.table_base = pci_resource_start(dev, bir);
map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
}
ret = -EINVAL;
if (pci_seg_supported)
ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
&map_irq);
if (type == PCI_CAP_ID_MSI && nvec > 1 && ret) {
/*
* If MAP_PIRQ_TYPE_MULTI_MSI is not available
* there's nothing else we can do in this case.
* Just set ret > 0 so driver can retry with
* single MSI.
*/
ret = 1;
goto out;
}
if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
map_irq.type = MAP_PIRQ_TYPE_MSI;
map_irq.index = -1;
map_irq.pirq = -1;
map_irq.bus = dev->bus->number;
ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
&map_irq);
if (ret != -EINVAL)
pci_seg_supported = false;
}
if (ret) {
dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
ret, domid);
goto out;
}
ret = xen_bind_pirq_msi_to_irq(dev, msidesc, map_irq.pirq,
(type == PCI_CAP_ID_MSI) ? nvec : 1,
(type == PCI_CAP_ID_MSIX) ? "msi-x" : "msi",
domid);
if (ret < 0)
goto out;
}
ret = 0;
out:
return ret;
}
static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
{
int ret = 0;
if (pci_seg_supported) {
struct physdev_pci_device restore_ext;
restore_ext.seg = pci_domain_nr(dev->bus);
restore_ext.bus = dev->bus->number;
restore_ext.devfn = dev->devfn;
ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi_ext,
&restore_ext);
if (ret == -ENOSYS)
pci_seg_supported = false;
WARN(ret && ret != -ENOSYS, "restore_msi_ext -> %d\n", ret);
}
if (!pci_seg_supported) {
struct physdev_restore_msi restore;
restore.bus = dev->bus->number;
restore.devfn = dev->devfn;
ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi, &restore);
WARN(ret && ret != -ENOSYS, "restore_msi -> %d\n", ret);
}
}
#endif
static void xen_teardown_msi_irqs(struct pci_dev *dev)
{
struct msi_desc *msidesc;
msidesc = first_pci_msi_entry(dev);
if (msidesc->msi_attrib.is_msix)
xen_pci_frontend_disable_msix(dev);
else
xen_pci_frontend_disable_msi(dev);
/* Free the IRQ's and the msidesc using the generic code. */
default_teardown_msi_irqs(dev);
}
static void xen_teardown_msi_irq(unsigned int irq)
{
xen_destroy_irq(irq);
}
#endif
int __init pci_xen_init(void)
{
if (!xen_pv_domain() || xen_initial_domain())
return -ENODEV;
printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n");
pcibios_set_cache_line_size();
pcibios_enable_irq = xen_pcifront_enable_irq;
pcibios_disable_irq = NULL;
#ifdef CONFIG_ACPI
/* Keep ACPI out of the picture */
acpi_noirq = 1;
#endif
#ifdef CONFIG_PCI_MSI
x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
pci_msi_ignore_mask = 1;
#endif
return 0;
}
#ifdef CONFIG_PCI_MSI
void __init xen_msi_init(void)
{
if (!disable_apic) {
/*
* If hardware supports (x2)APIC virtualization (as indicated
* by hypervisor's leaf 4) then we don't need to use pirqs/
* event channels for MSI handling and instead use regular
* APIC processing
*/
uint32_t eax = cpuid_eax(xen_cpuid_base() + 4);
if (((eax & XEN_HVM_CPUID_X2APIC_VIRT) && x2apic_mode) ||
((eax & XEN_HVM_CPUID_APIC_ACCESS_VIRT) && boot_cpu_has(X86_FEATURE_APIC)))
return;
}
x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
}
#endif
int __init pci_xen_hvm_init(void)
{
if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
return 0;
#ifdef CONFIG_ACPI
/*
* We don't want to change the actual ACPI delivery model,
* just how GSIs get registered.
*/
__acpi_register_gsi = acpi_register_gsi_xen_hvm;
__acpi_unregister_gsi = NULL;
#endif
#ifdef CONFIG_PCI_MSI
/*
* We need to wait until after x2apic is initialized
* before we can set MSI IRQ ops.
*/
x86_platform.apic_post_init = xen_msi_init;
#endif
return 0;
}
#ifdef CONFIG_XEN_DOM0
int __init pci_xen_initial_domain(void)
{
int irq;
#ifdef CONFIG_PCI_MSI
x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
pci_msi_ignore_mask = 1;
#endif
__acpi_register_gsi = acpi_register_gsi_xen;
__acpi_unregister_gsi = NULL;
/*
* Pre-allocate the legacy IRQs. Use NR_LEGACY_IRQS here
* because we don't have a PIC and thus nr_legacy_irqs() is zero.
*/
for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
int trigger, polarity;
if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
continue;
xen_register_pirq(irq, -1 /* no GSI override */,
trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE,
true /* Map GSI to PIRQ */);
}
if (0 == nr_ioapics) {
for (irq = 0; irq < nr_legacy_irqs(); irq++)
xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
}
return 0;
}
struct xen_device_domain_owner {
domid_t domain;
struct pci_dev *dev;
struct list_head list;
};
static DEFINE_SPINLOCK(dev_domain_list_spinlock);
static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
list_for_each_entry(owner, &dev_domain_list, list) {
if (owner->dev == dev)
return owner;
}
return NULL;
}
int xen_find_device_domain_owner(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
int domain = -ENODEV;
spin_lock(&dev_domain_list_spinlock);
owner = find_device(dev);
if (owner)
domain = owner->domain;
spin_unlock(&dev_domain_list_spinlock);
return domain;
}
EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
{
struct xen_device_domain_owner *owner;
owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
if (!owner)
return -ENODEV;
spin_lock(&dev_domain_list_spinlock);
if (find_device(dev)) {
spin_unlock(&dev_domain_list_spinlock);
kfree(owner);
return -EEXIST;
}
owner->domain = domain;
owner->dev = dev;
list_add_tail(&owner->list, &dev_domain_list);
spin_unlock(&dev_domain_list_spinlock);
return 0;
}
EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
int xen_unregister_device_domain_owner(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
spin_lock(&dev_domain_list_spinlock);
owner = find_device(dev);
if (!owner) {
spin_unlock(&dev_domain_list_spinlock);
return -ENODEV;
}
list_del(&owner->list);
spin_unlock(&dev_domain_list_spinlock);
kfree(owner);
return 0;
}
EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
#endif