mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-29 23:24:11 +08:00
3a11b0b5d8
Correct compile issue if CONFIG_TTY is not set by only adding ttyVK devices if CONFIG_BCM_VK_TTY is set. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Scott Branden <scott.branden@broadcom.com> Link: https://lore.kernel.org/r/20210203223826.21674-1-scott.branden@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1653 lines
44 KiB
C
1653 lines
44 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2018-2020 Broadcom.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kref.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_regs.h>
|
|
#include <uapi/linux/misc/bcm_vk.h>
|
|
|
|
#include "bcm_vk.h"
|
|
|
|
#define PCI_DEVICE_ID_VALKYRIE 0x5e87
|
|
#define PCI_DEVICE_ID_VIPER 0x5e88
|
|
|
|
static DEFINE_IDA(bcm_vk_ida);
|
|
|
|
enum soc_idx {
|
|
VALKYRIE_A0 = 0,
|
|
VALKYRIE_B0,
|
|
VIPER,
|
|
VK_IDX_INVALID
|
|
};
|
|
|
|
enum img_idx {
|
|
IMG_PRI = 0,
|
|
IMG_SEC,
|
|
IMG_PER_TYPE_MAX
|
|
};
|
|
|
|
struct load_image_entry {
|
|
const u32 image_type;
|
|
const char *image_name[IMG_PER_TYPE_MAX];
|
|
};
|
|
|
|
#define NUM_BOOT_STAGES 2
|
|
/* default firmware images names */
|
|
static const struct load_image_entry image_tab[][NUM_BOOT_STAGES] = {
|
|
[VALKYRIE_A0] = {
|
|
{VK_IMAGE_TYPE_BOOT1, {"vk_a0-boot1.bin", "vk-boot1.bin"}},
|
|
{VK_IMAGE_TYPE_BOOT2, {"vk_a0-boot2.bin", "vk-boot2.bin"}}
|
|
},
|
|
[VALKYRIE_B0] = {
|
|
{VK_IMAGE_TYPE_BOOT1, {"vk_b0-boot1.bin", "vk-boot1.bin"}},
|
|
{VK_IMAGE_TYPE_BOOT2, {"vk_b0-boot2.bin", "vk-boot2.bin"}}
|
|
},
|
|
|
|
[VIPER] = {
|
|
{VK_IMAGE_TYPE_BOOT1, {"vp-boot1.bin", ""}},
|
|
{VK_IMAGE_TYPE_BOOT2, {"vp-boot2.bin", ""}}
|
|
},
|
|
};
|
|
|
|
/* Location of memory base addresses of interest in BAR1 */
|
|
/* Load Boot1 to start of ITCM */
|
|
#define BAR1_CODEPUSH_BASE_BOOT1 0x100000
|
|
|
|
/* Allow minimum 1s for Load Image timeout responses */
|
|
#define LOAD_IMAGE_TIMEOUT_MS (1 * MSEC_PER_SEC)
|
|
|
|
/* Image startup timeouts */
|
|
#define BOOT1_STARTUP_TIMEOUT_MS (5 * MSEC_PER_SEC)
|
|
#define BOOT2_STARTUP_TIMEOUT_MS (10 * MSEC_PER_SEC)
|
|
|
|
/* 1ms wait for checking the transfer complete status */
|
|
#define TXFR_COMPLETE_TIMEOUT_MS 1
|
|
|
|
/* MSIX usages */
|
|
#define VK_MSIX_MSGQ_MAX 3
|
|
#define VK_MSIX_NOTF_MAX 1
|
|
#define VK_MSIX_TTY_MAX BCM_VK_NUM_TTY
|
|
#define VK_MSIX_IRQ_MAX (VK_MSIX_MSGQ_MAX + VK_MSIX_NOTF_MAX + \
|
|
VK_MSIX_TTY_MAX)
|
|
#define VK_MSIX_IRQ_MIN_REQ (VK_MSIX_MSGQ_MAX + VK_MSIX_NOTF_MAX)
|
|
|
|
/* Number of bits set in DMA mask*/
|
|
#define BCM_VK_DMA_BITS 64
|
|
|
|
/* Ucode boot wait time */
|
|
#define BCM_VK_UCODE_BOOT_US (100 * USEC_PER_MSEC)
|
|
/* 50% margin */
|
|
#define BCM_VK_UCODE_BOOT_MAX_US ((BCM_VK_UCODE_BOOT_US * 3) >> 1)
|
|
|
|
/* deinit time for the card os after receiving doorbell */
|
|
#define BCM_VK_DEINIT_TIME_MS (2 * MSEC_PER_SEC)
|
|
|
|
/*
|
|
* module parameters
|
|
*/
|
|
static bool auto_load = true;
|
|
module_param(auto_load, bool, 0444);
|
|
MODULE_PARM_DESC(auto_load,
|
|
"Load images automatically at PCIe probe time.\n");
|
|
static uint nr_scratch_pages = VK_BAR1_SCRATCH_DEF_NR_PAGES;
|
|
module_param(nr_scratch_pages, uint, 0444);
|
|
MODULE_PARM_DESC(nr_scratch_pages,
|
|
"Number of pre allocated DMAable coherent pages.\n");
|
|
static uint nr_ib_sgl_blk = BCM_VK_DEF_IB_SGL_BLK_LEN;
|
|
module_param(nr_ib_sgl_blk, uint, 0444);
|
|
MODULE_PARM_DESC(nr_ib_sgl_blk,
|
|
"Number of in-band msg blks for short SGL.\n");
|
|
|
|
/*
|
|
* alerts that could be generated from peer
|
|
*/
|
|
const struct bcm_vk_entry bcm_vk_peer_err[BCM_VK_PEER_ERR_NUM] = {
|
|
{ERR_LOG_UECC, ERR_LOG_UECC, "uecc"},
|
|
{ERR_LOG_SSIM_BUSY, ERR_LOG_SSIM_BUSY, "ssim_busy"},
|
|
{ERR_LOG_AFBC_BUSY, ERR_LOG_AFBC_BUSY, "afbc_busy"},
|
|
{ERR_LOG_HIGH_TEMP_ERR, ERR_LOG_HIGH_TEMP_ERR, "high_temp"},
|
|
{ERR_LOG_WDOG_TIMEOUT, ERR_LOG_WDOG_TIMEOUT, "wdog_timeout"},
|
|
{ERR_LOG_SYS_FAULT, ERR_LOG_SYS_FAULT, "sys_fault"},
|
|
{ERR_LOG_RAMDUMP, ERR_LOG_RAMDUMP, "ramdump"},
|
|
{ERR_LOG_COP_WDOG_TIMEOUT, ERR_LOG_COP_WDOG_TIMEOUT,
|
|
"cop_wdog_timeout"},
|
|
{ERR_LOG_MEM_ALLOC_FAIL, ERR_LOG_MEM_ALLOC_FAIL, "malloc_fail warn"},
|
|
{ERR_LOG_LOW_TEMP_WARN, ERR_LOG_LOW_TEMP_WARN, "low_temp warn"},
|
|
{ERR_LOG_ECC, ERR_LOG_ECC, "ecc"},
|
|
{ERR_LOG_IPC_DWN, ERR_LOG_IPC_DWN, "ipc_down"},
|
|
};
|
|
|
|
/* alerts detected by the host */
|
|
const struct bcm_vk_entry bcm_vk_host_err[BCM_VK_HOST_ERR_NUM] = {
|
|
{ERR_LOG_HOST_PCIE_DWN, ERR_LOG_HOST_PCIE_DWN, "PCIe_down"},
|
|
{ERR_LOG_HOST_HB_FAIL, ERR_LOG_HOST_HB_FAIL, "hb_fail"},
|
|
{ERR_LOG_HOST_INTF_V_FAIL, ERR_LOG_HOST_INTF_V_FAIL, "intf_ver_fail"},
|
|
};
|
|
|
|
irqreturn_t bcm_vk_notf_irqhandler(int irq, void *dev_id)
|
|
{
|
|
struct bcm_vk *vk = dev_id;
|
|
|
|
if (!bcm_vk_drv_access_ok(vk)) {
|
|
dev_err(&vk->pdev->dev,
|
|
"Interrupt %d received when msgq not inited\n", irq);
|
|
goto skip_schedule_work;
|
|
}
|
|
|
|
/* if notification is not pending, set bit and schedule work */
|
|
if (test_and_set_bit(BCM_VK_WQ_NOTF_PEND, vk->wq_offload) == 0)
|
|
queue_work(vk->wq_thread, &vk->wq_work);
|
|
|
|
skip_schedule_work:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bcm_vk_intf_ver_chk(struct bcm_vk *vk)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
u32 reg;
|
|
u16 major, minor;
|
|
int ret = 0;
|
|
|
|
/* read interface register */
|
|
reg = vkread32(vk, BAR_0, BAR_INTF_VER);
|
|
major = (reg >> BAR_INTF_VER_MAJOR_SHIFT) & BAR_INTF_VER_MASK;
|
|
minor = reg & BAR_INTF_VER_MASK;
|
|
|
|
/*
|
|
* if major number is 0, it is pre-release and it would be allowed
|
|
* to continue, else, check versions accordingly
|
|
*/
|
|
if (!major) {
|
|
dev_warn(dev, "Pre-release major.minor=%d.%d - drv %d.%d\n",
|
|
major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
|
|
} else if (major != SEMANTIC_MAJOR) {
|
|
dev_err(dev,
|
|
"Intf major.minor=%d.%d rejected - drv %d.%d\n",
|
|
major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
|
|
bcm_vk_set_host_alert(vk, ERR_LOG_HOST_INTF_V_FAIL);
|
|
ret = -EPFNOSUPPORT;
|
|
} else {
|
|
dev_dbg(dev,
|
|
"Intf major.minor=%d.%d passed - drv %d.%d\n",
|
|
major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void bcm_vk_log_notf(struct bcm_vk *vk,
|
|
struct bcm_vk_alert *alert,
|
|
struct bcm_vk_entry const *entry_tab,
|
|
const u32 table_size)
|
|
{
|
|
u32 i;
|
|
u32 masked_val, latched_val;
|
|
struct bcm_vk_entry const *entry;
|
|
u32 reg;
|
|
u16 ecc_mem_err, uecc_mem_err;
|
|
struct device *dev = &vk->pdev->dev;
|
|
|
|
for (i = 0; i < table_size; i++) {
|
|
entry = &entry_tab[i];
|
|
masked_val = entry->mask & alert->notfs;
|
|
latched_val = entry->mask & alert->flags;
|
|
|
|
if (masked_val == ERR_LOG_UECC) {
|
|
/*
|
|
* if there is difference between stored cnt and it
|
|
* is greater than threshold, log it.
|
|
*/
|
|
reg = vkread32(vk, BAR_0, BAR_CARD_ERR_MEM);
|
|
BCM_VK_EXTRACT_FIELD(uecc_mem_err, reg,
|
|
BCM_VK_MEM_ERR_FIELD_MASK,
|
|
BCM_VK_UECC_MEM_ERR_SHIFT);
|
|
if ((uecc_mem_err != vk->alert_cnts.uecc) &&
|
|
(uecc_mem_err >= BCM_VK_UECC_THRESHOLD))
|
|
dev_info(dev,
|
|
"ALERT! %s.%d uecc RAISED - ErrCnt %d\n",
|
|
DRV_MODULE_NAME, vk->devid,
|
|
uecc_mem_err);
|
|
vk->alert_cnts.uecc = uecc_mem_err;
|
|
} else if (masked_val == ERR_LOG_ECC) {
|
|
reg = vkread32(vk, BAR_0, BAR_CARD_ERR_MEM);
|
|
BCM_VK_EXTRACT_FIELD(ecc_mem_err, reg,
|
|
BCM_VK_MEM_ERR_FIELD_MASK,
|
|
BCM_VK_ECC_MEM_ERR_SHIFT);
|
|
if ((ecc_mem_err != vk->alert_cnts.ecc) &&
|
|
(ecc_mem_err >= BCM_VK_ECC_THRESHOLD))
|
|
dev_info(dev, "ALERT! %s.%d ecc RAISED - ErrCnt %d\n",
|
|
DRV_MODULE_NAME, vk->devid,
|
|
ecc_mem_err);
|
|
vk->alert_cnts.ecc = ecc_mem_err;
|
|
} else if (masked_val != latched_val) {
|
|
/* print a log as info */
|
|
dev_info(dev, "ALERT! %s.%d %s %s\n",
|
|
DRV_MODULE_NAME, vk->devid, entry->str,
|
|
masked_val ? "RAISED" : "CLEARED");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bcm_vk_dump_peer_log(struct bcm_vk *vk)
|
|
{
|
|
struct bcm_vk_peer_log log;
|
|
struct bcm_vk_peer_log *log_info = &vk->peerlog_info;
|
|
char loc_buf[BCM_VK_PEER_LOG_LINE_MAX];
|
|
int cnt;
|
|
struct device *dev = &vk->pdev->dev;
|
|
unsigned int data_offset;
|
|
|
|
memcpy_fromio(&log, vk->bar[BAR_2] + vk->peerlog_off, sizeof(log));
|
|
|
|
dev_dbg(dev, "Peer PANIC: Size 0x%x(0x%x), [Rd Wr] = [%d %d]\n",
|
|
log.buf_size, log.mask, log.rd_idx, log.wr_idx);
|
|
|
|
if (!log_info->buf_size) {
|
|
dev_err(dev, "Peer log dump disabled - skipped!\n");
|
|
return;
|
|
}
|
|
|
|
/* perform range checking for rd/wr idx */
|
|
if ((log.rd_idx > log_info->mask) ||
|
|
(log.wr_idx > log_info->mask) ||
|
|
(log.buf_size != log_info->buf_size) ||
|
|
(log.mask != log_info->mask)) {
|
|
dev_err(dev,
|
|
"Corrupted Ptrs: Size 0x%x(0x%x) Mask 0x%x(0x%x) [Rd Wr] = [%d %d], skip log dump.\n",
|
|
log_info->buf_size, log.buf_size,
|
|
log_info->mask, log.mask,
|
|
log.rd_idx, log.wr_idx);
|
|
return;
|
|
}
|
|
|
|
cnt = 0;
|
|
data_offset = vk->peerlog_off + sizeof(struct bcm_vk_peer_log);
|
|
loc_buf[BCM_VK_PEER_LOG_LINE_MAX - 1] = '\0';
|
|
while (log.rd_idx != log.wr_idx) {
|
|
loc_buf[cnt] = vkread8(vk, BAR_2, data_offset + log.rd_idx);
|
|
|
|
if ((loc_buf[cnt] == '\0') ||
|
|
(cnt == (BCM_VK_PEER_LOG_LINE_MAX - 1))) {
|
|
dev_err(dev, "%s", loc_buf);
|
|
cnt = 0;
|
|
} else {
|
|
cnt++;
|
|
}
|
|
log.rd_idx = (log.rd_idx + 1) & log.mask;
|
|
}
|
|
/* update rd idx at the end */
|
|
vkwrite32(vk, log.rd_idx, BAR_2,
|
|
vk->peerlog_off + offsetof(struct bcm_vk_peer_log, rd_idx));
|
|
}
|
|
|
|
void bcm_vk_handle_notf(struct bcm_vk *vk)
|
|
{
|
|
u32 reg;
|
|
struct bcm_vk_alert alert;
|
|
bool intf_down;
|
|
unsigned long flags;
|
|
|
|
/* handle peer alerts and then locally detected ones */
|
|
reg = vkread32(vk, BAR_0, BAR_CARD_ERR_LOG);
|
|
intf_down = BCM_VK_INTF_IS_DOWN(reg);
|
|
if (!intf_down) {
|
|
vk->peer_alert.notfs = reg;
|
|
bcm_vk_log_notf(vk, &vk->peer_alert, bcm_vk_peer_err,
|
|
ARRAY_SIZE(bcm_vk_peer_err));
|
|
vk->peer_alert.flags = vk->peer_alert.notfs;
|
|
} else {
|
|
/* turn off access */
|
|
bcm_vk_blk_drv_access(vk);
|
|
}
|
|
|
|
/* check and make copy of alert with lock and then free lock */
|
|
spin_lock_irqsave(&vk->host_alert_lock, flags);
|
|
if (intf_down)
|
|
vk->host_alert.notfs |= ERR_LOG_HOST_PCIE_DWN;
|
|
|
|
alert = vk->host_alert;
|
|
vk->host_alert.flags = vk->host_alert.notfs;
|
|
spin_unlock_irqrestore(&vk->host_alert_lock, flags);
|
|
|
|
/* call display with copy */
|
|
bcm_vk_log_notf(vk, &alert, bcm_vk_host_err,
|
|
ARRAY_SIZE(bcm_vk_host_err));
|
|
|
|
/*
|
|
* If it is a sys fault or heartbeat timeout, we would like extract
|
|
* log msg from the card so that we would know what is the last fault
|
|
*/
|
|
if (!intf_down &&
|
|
((vk->host_alert.flags & ERR_LOG_HOST_HB_FAIL) ||
|
|
(vk->peer_alert.flags & ERR_LOG_SYS_FAULT)))
|
|
bcm_vk_dump_peer_log(vk);
|
|
}
|
|
|
|
static inline int bcm_vk_wait(struct bcm_vk *vk, enum pci_barno bar,
|
|
u64 offset, u32 mask, u32 value,
|
|
unsigned long timeout_ms)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
unsigned long start_time;
|
|
unsigned long timeout;
|
|
u32 rd_val, boot_status;
|
|
|
|
start_time = jiffies;
|
|
timeout = start_time + msecs_to_jiffies(timeout_ms);
|
|
|
|
do {
|
|
rd_val = vkread32(vk, bar, offset);
|
|
dev_dbg(dev, "BAR%d Offset=0x%llx: 0x%x\n",
|
|
bar, offset, rd_val);
|
|
|
|
/* check for any boot err condition */
|
|
boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
|
|
if (boot_status & BOOT_ERR_MASK) {
|
|
dev_err(dev, "Boot Err 0x%x, progress 0x%x after %d ms\n",
|
|
(boot_status & BOOT_ERR_MASK) >> BOOT_ERR_SHIFT,
|
|
boot_status & BOOT_PROG_MASK,
|
|
jiffies_to_msecs(jiffies - start_time));
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
cpu_relax();
|
|
cond_resched();
|
|
} while ((rd_val & mask) != value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm_vk_get_card_info(struct bcm_vk *vk)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
u32 offset;
|
|
int i;
|
|
u8 *dst;
|
|
struct bcm_vk_card_info *info = &vk->card_info;
|
|
|
|
/* first read the offset from spare register */
|
|
offset = vkread32(vk, BAR_0, BAR_CARD_STATIC_INFO);
|
|
offset &= (pci_resource_len(vk->pdev, BAR_2 * 2) - 1);
|
|
|
|
/* based on the offset, read info to internal card info structure */
|
|
dst = (u8 *)info;
|
|
for (i = 0; i < sizeof(*info); i++)
|
|
*dst++ = vkread8(vk, BAR_2, offset++);
|
|
|
|
#define CARD_INFO_LOG_FMT "version : %x\n" \
|
|
"os_tag : %s\n" \
|
|
"cmpt_tag : %s\n" \
|
|
"cpu_freq : %d MHz\n" \
|
|
"cpu_scale : %d full, %d lowest\n" \
|
|
"ddr_freq : %d MHz\n" \
|
|
"ddr_size : %d MB\n" \
|
|
"video_freq: %d MHz\n"
|
|
dev_dbg(dev, CARD_INFO_LOG_FMT, info->version, info->os_tag,
|
|
info->cmpt_tag, info->cpu_freq_mhz, info->cpu_scale[0],
|
|
info->cpu_scale[MAX_OPP - 1], info->ddr_freq_mhz,
|
|
info->ddr_size_MB, info->video_core_freq_mhz);
|
|
|
|
/*
|
|
* get the peer log pointer, only need the offset, and get record
|
|
* of the log buffer information which would be used for checking
|
|
* before dump, in case the BAR2 memory has been corrupted.
|
|
*/
|
|
vk->peerlog_off = offset;
|
|
memcpy_fromio(&vk->peerlog_info, vk->bar[BAR_2] + vk->peerlog_off,
|
|
sizeof(vk->peerlog_info));
|
|
|
|
/*
|
|
* Do a range checking and if out of bound, the record will be zeroed
|
|
* which guarantees that nothing would be dumped. In other words,
|
|
* peer dump is disabled.
|
|
*/
|
|
if ((vk->peerlog_info.buf_size > BCM_VK_PEER_LOG_BUF_MAX) ||
|
|
(vk->peerlog_info.mask != (vk->peerlog_info.buf_size - 1)) ||
|
|
(vk->peerlog_info.rd_idx > vk->peerlog_info.mask) ||
|
|
(vk->peerlog_info.wr_idx > vk->peerlog_info.mask)) {
|
|
dev_err(dev, "Peer log disabled - range error: Size 0x%x(0x%x), [Rd Wr] = [%d %d]\n",
|
|
vk->peerlog_info.buf_size,
|
|
vk->peerlog_info.mask,
|
|
vk->peerlog_info.rd_idx,
|
|
vk->peerlog_info.wr_idx);
|
|
memset(&vk->peerlog_info, 0, sizeof(vk->peerlog_info));
|
|
} else {
|
|
dev_dbg(dev, "Peer log: Size 0x%x(0x%x), [Rd Wr] = [%d %d]\n",
|
|
vk->peerlog_info.buf_size,
|
|
vk->peerlog_info.mask,
|
|
vk->peerlog_info.rd_idx,
|
|
vk->peerlog_info.wr_idx);
|
|
}
|
|
}
|
|
|
|
static void bcm_vk_get_proc_mon_info(struct bcm_vk *vk)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
struct bcm_vk_proc_mon_info *mon = &vk->proc_mon_info;
|
|
u32 num, entry_size, offset, buf_size;
|
|
u8 *dst;
|
|
|
|
/* calculate offset which is based on peerlog offset */
|
|
buf_size = vkread32(vk, BAR_2,
|
|
vk->peerlog_off
|
|
+ offsetof(struct bcm_vk_peer_log, buf_size));
|
|
offset = vk->peerlog_off + sizeof(struct bcm_vk_peer_log)
|
|
+ buf_size;
|
|
|
|
/* first read the num and entry size */
|
|
num = vkread32(vk, BAR_2, offset);
|
|
entry_size = vkread32(vk, BAR_2, offset + sizeof(num));
|
|
|
|
/* check for max allowed */
|
|
if (num > BCM_VK_PROC_MON_MAX) {
|
|
dev_err(dev, "Processing monitoring entry %d exceeds max %d\n",
|
|
num, BCM_VK_PROC_MON_MAX);
|
|
return;
|
|
}
|
|
mon->num = num;
|
|
mon->entry_size = entry_size;
|
|
|
|
vk->proc_mon_off = offset;
|
|
|
|
/* read it once that will capture those static info */
|
|
dst = (u8 *)&mon->entries[0];
|
|
offset += sizeof(num) + sizeof(entry_size);
|
|
memcpy_fromio(dst, vk->bar[BAR_2] + offset, num * entry_size);
|
|
}
|
|
|
|
static int bcm_vk_sync_card_info(struct bcm_vk *vk)
|
|
{
|
|
u32 rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
|
|
|
|
/* check for marker, but allow diags mode to skip sync */
|
|
if (!bcm_vk_msgq_marker_valid(vk))
|
|
return (rdy_marker == VK_BAR1_DIAG_RDY_MARKER ? 0 : -EINVAL);
|
|
|
|
/*
|
|
* Write down scratch addr which is used for DMA. For
|
|
* signed part, BAR1 is accessible only after boot2 has come
|
|
* up
|
|
*/
|
|
if (vk->tdma_addr) {
|
|
vkwrite32(vk, (u64)vk->tdma_addr >> 32, BAR_1,
|
|
VK_BAR1_SCRATCH_OFF_HI);
|
|
vkwrite32(vk, (u32)vk->tdma_addr, BAR_1,
|
|
VK_BAR1_SCRATCH_OFF_LO);
|
|
vkwrite32(vk, nr_scratch_pages * PAGE_SIZE, BAR_1,
|
|
VK_BAR1_SCRATCH_SZ_ADDR);
|
|
}
|
|
|
|
/* get static card info, only need to read once */
|
|
bcm_vk_get_card_info(vk);
|
|
|
|
/* get the proc mon info once */
|
|
bcm_vk_get_proc_mon_info(vk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bcm_vk_blk_drv_access(struct bcm_vk *vk)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* kill all the apps except for the process that is resetting.
|
|
* If not called during reset, reset_pid will be 0, and all will be
|
|
* killed.
|
|
*/
|
|
spin_lock(&vk->ctx_lock);
|
|
|
|
/* set msgq_inited to 0 so that all rd/wr will be blocked */
|
|
atomic_set(&vk->msgq_inited, 0);
|
|
|
|
for (i = 0; i < VK_PID_HT_SZ; i++) {
|
|
struct bcm_vk_ctx *ctx;
|
|
|
|
list_for_each_entry(ctx, &vk->pid_ht[i].head, node) {
|
|
if (ctx->pid != vk->reset_pid) {
|
|
dev_dbg(&vk->pdev->dev,
|
|
"Send kill signal to pid %d\n",
|
|
ctx->pid);
|
|
kill_pid(find_vpid(ctx->pid), SIGKILL, 1);
|
|
}
|
|
}
|
|
}
|
|
bcm_vk_tty_terminate_tty_user(vk);
|
|
spin_unlock(&vk->ctx_lock);
|
|
}
|
|
|
|
static void bcm_vk_buf_notify(struct bcm_vk *vk, void *bufp,
|
|
dma_addr_t host_buf_addr, u32 buf_size)
|
|
{
|
|
/* update the dma address to the card */
|
|
vkwrite32(vk, (u64)host_buf_addr >> 32, BAR_1,
|
|
VK_BAR1_DMA_BUF_OFF_HI);
|
|
vkwrite32(vk, (u32)host_buf_addr, BAR_1,
|
|
VK_BAR1_DMA_BUF_OFF_LO);
|
|
vkwrite32(vk, buf_size, BAR_1, VK_BAR1_DMA_BUF_SZ);
|
|
}
|
|
|
|
static int bcm_vk_load_image_by_type(struct bcm_vk *vk, u32 load_type,
|
|
const char *filename)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
const struct firmware *fw = NULL;
|
|
void *bufp = NULL;
|
|
size_t max_buf, offset;
|
|
int ret;
|
|
u64 offset_codepush;
|
|
u32 codepush;
|
|
u32 value;
|
|
dma_addr_t boot_dma_addr;
|
|
bool is_stdalone;
|
|
|
|
if (load_type == VK_IMAGE_TYPE_BOOT1) {
|
|
/*
|
|
* After POR, enable VK soft BOOTSRC so bootrom do not clear
|
|
* the pushed image (the TCM memories).
|
|
*/
|
|
value = vkread32(vk, BAR_0, BAR_BOOTSRC_SELECT);
|
|
value |= BOOTSRC_SOFT_ENABLE;
|
|
vkwrite32(vk, value, BAR_0, BAR_BOOTSRC_SELECT);
|
|
|
|
codepush = CODEPUSH_BOOTSTART + CODEPUSH_BOOT1_ENTRY;
|
|
offset_codepush = BAR_CODEPUSH_SBL;
|
|
|
|
/* Write a 1 to request SRAM open bit */
|
|
vkwrite32(vk, CODEPUSH_BOOTSTART, BAR_0, offset_codepush);
|
|
|
|
/* Wait for VK to respond */
|
|
ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, SRAM_OPEN,
|
|
SRAM_OPEN, LOAD_IMAGE_TIMEOUT_MS);
|
|
if (ret < 0) {
|
|
dev_err(dev, "boot1 wait SRAM err - ret(%d)\n", ret);
|
|
goto err_buf_out;
|
|
}
|
|
|
|
max_buf = SZ_256K;
|
|
bufp = dma_alloc_coherent(dev,
|
|
max_buf,
|
|
&boot_dma_addr, GFP_KERNEL);
|
|
if (!bufp) {
|
|
dev_err(dev, "Error allocating 0x%zx\n", max_buf);
|
|
ret = -ENOMEM;
|
|
goto err_buf_out;
|
|
}
|
|
} else if (load_type == VK_IMAGE_TYPE_BOOT2) {
|
|
codepush = CODEPUSH_BOOT2_ENTRY;
|
|
offset_codepush = BAR_CODEPUSH_SBI;
|
|
|
|
/* Wait for VK to respond */
|
|
ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, DDR_OPEN,
|
|
DDR_OPEN, LOAD_IMAGE_TIMEOUT_MS);
|
|
if (ret < 0) {
|
|
dev_err(dev, "boot2 wait DDR open error - ret(%d)\n",
|
|
ret);
|
|
goto err_buf_out;
|
|
}
|
|
|
|
max_buf = SZ_4M;
|
|
bufp = dma_alloc_coherent(dev,
|
|
max_buf,
|
|
&boot_dma_addr, GFP_KERNEL);
|
|
if (!bufp) {
|
|
dev_err(dev, "Error allocating 0x%zx\n", max_buf);
|
|
ret = -ENOMEM;
|
|
goto err_buf_out;
|
|
}
|
|
|
|
bcm_vk_buf_notify(vk, bufp, boot_dma_addr, max_buf);
|
|
} else {
|
|
dev_err(dev, "Error invalid image type 0x%x\n", load_type);
|
|
ret = -EINVAL;
|
|
goto err_buf_out;
|
|
}
|
|
|
|
offset = 0;
|
|
ret = request_partial_firmware_into_buf(&fw, filename, dev,
|
|
bufp, max_buf, offset);
|
|
if (ret) {
|
|
dev_err(dev, "Error %d requesting firmware file: %s\n",
|
|
ret, filename);
|
|
goto err_firmware_out;
|
|
}
|
|
dev_dbg(dev, "size=0x%zx\n", fw->size);
|
|
if (load_type == VK_IMAGE_TYPE_BOOT1)
|
|
memcpy_toio(vk->bar[BAR_1] + BAR1_CODEPUSH_BASE_BOOT1,
|
|
bufp,
|
|
fw->size);
|
|
|
|
dev_dbg(dev, "Signaling 0x%x to 0x%llx\n", codepush, offset_codepush);
|
|
vkwrite32(vk, codepush, BAR_0, offset_codepush);
|
|
|
|
if (load_type == VK_IMAGE_TYPE_BOOT1) {
|
|
u32 boot_status;
|
|
|
|
/* wait until done */
|
|
ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
|
|
BOOT1_RUNNING,
|
|
BOOT1_RUNNING,
|
|
BOOT1_STARTUP_TIMEOUT_MS);
|
|
|
|
boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
|
|
is_stdalone = !BCM_VK_INTF_IS_DOWN(boot_status) &&
|
|
(boot_status & BOOT_STDALONE_RUNNING);
|
|
if (ret && !is_stdalone) {
|
|
dev_err(dev,
|
|
"Timeout %ld ms waiting for boot1 to come up - ret(%d)\n",
|
|
BOOT1_STARTUP_TIMEOUT_MS, ret);
|
|
goto err_firmware_out;
|
|
} else if (is_stdalone) {
|
|
u32 reg;
|
|
|
|
reg = vkread32(vk, BAR_0, BAR_BOOT1_STDALONE_PROGRESS);
|
|
if ((reg & BOOT1_STDALONE_PROGRESS_MASK) ==
|
|
BOOT1_STDALONE_SUCCESS) {
|
|
dev_info(dev, "Boot1 standalone success\n");
|
|
ret = 0;
|
|
} else {
|
|
dev_err(dev, "Timeout %ld ms - Boot1 standalone failure\n",
|
|
BOOT1_STARTUP_TIMEOUT_MS);
|
|
ret = -EINVAL;
|
|
goto err_firmware_out;
|
|
}
|
|
}
|
|
} else if (load_type == VK_IMAGE_TYPE_BOOT2) {
|
|
unsigned long timeout;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
|
|
|
|
/* To send more data to VK than max_buf allowed at a time */
|
|
do {
|
|
/*
|
|
* Check for ack from card. when Ack is received,
|
|
* it means all the data is received by card.
|
|
* Exit the loop after ack is received.
|
|
*/
|
|
ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS,
|
|
FW_LOADER_ACK_RCVD_ALL_DATA,
|
|
FW_LOADER_ACK_RCVD_ALL_DATA,
|
|
TXFR_COMPLETE_TIMEOUT_MS);
|
|
if (ret == 0) {
|
|
dev_dbg(dev, "Exit boot2 download\n");
|
|
break;
|
|
} else if (ret == -EFAULT) {
|
|
dev_err(dev, "Error detected during ACK waiting");
|
|
goto err_firmware_out;
|
|
}
|
|
|
|
/* exit the loop, if there is no response from card */
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(dev, "Error. No reply from card\n");
|
|
ret = -ETIMEDOUT;
|
|
goto err_firmware_out;
|
|
}
|
|
|
|
/* Wait for VK to open BAR space to copy new data */
|
|
ret = bcm_vk_wait(vk, BAR_0, offset_codepush,
|
|
codepush, 0,
|
|
TXFR_COMPLETE_TIMEOUT_MS);
|
|
if (ret == 0) {
|
|
offset += max_buf;
|
|
ret = request_partial_firmware_into_buf
|
|
(&fw,
|
|
filename,
|
|
dev, bufp,
|
|
max_buf,
|
|
offset);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Error %d requesting firmware file: %s offset: 0x%zx\n",
|
|
ret, filename, offset);
|
|
goto err_firmware_out;
|
|
}
|
|
dev_dbg(dev, "size=0x%zx\n", fw->size);
|
|
dev_dbg(dev, "Signaling 0x%x to 0x%llx\n",
|
|
codepush, offset_codepush);
|
|
vkwrite32(vk, codepush, BAR_0, offset_codepush);
|
|
/* reload timeout after every codepush */
|
|
timeout = jiffies +
|
|
msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS);
|
|
} else if (ret == -EFAULT) {
|
|
dev_err(dev, "Error detected waiting for transfer\n");
|
|
goto err_firmware_out;
|
|
}
|
|
} while (1);
|
|
|
|
/* wait for fw status bits to indicate app ready */
|
|
ret = bcm_vk_wait(vk, BAR_0, VK_BAR_FWSTS,
|
|
VK_FWSTS_READY,
|
|
VK_FWSTS_READY,
|
|
BOOT2_STARTUP_TIMEOUT_MS);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Boot2 not ready - ret(%d)\n", ret);
|
|
goto err_firmware_out;
|
|
}
|
|
|
|
is_stdalone = vkread32(vk, BAR_0, BAR_BOOT_STATUS) &
|
|
BOOT_STDALONE_RUNNING;
|
|
if (!is_stdalone) {
|
|
ret = bcm_vk_intf_ver_chk(vk);
|
|
if (ret) {
|
|
dev_err(dev, "failure in intf version check\n");
|
|
goto err_firmware_out;
|
|
}
|
|
|
|
/*
|
|
* Next, initialize Message Q if we are loading boot2.
|
|
* Do a force sync
|
|
*/
|
|
ret = bcm_vk_sync_msgq(vk, true);
|
|
if (ret) {
|
|
dev_err(dev, "Boot2 Error reading comm msg Q info\n");
|
|
ret = -EIO;
|
|
goto err_firmware_out;
|
|
}
|
|
|
|
/* sync & channel other info */
|
|
ret = bcm_vk_sync_card_info(vk);
|
|
if (ret) {
|
|
dev_err(dev, "Syncing Card Info failure\n");
|
|
goto err_firmware_out;
|
|
}
|
|
}
|
|
}
|
|
|
|
err_firmware_out:
|
|
release_firmware(fw);
|
|
|
|
err_buf_out:
|
|
if (bufp)
|
|
dma_free_coherent(dev, max_buf, bufp, boot_dma_addr);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 bcm_vk_next_boot_image(struct bcm_vk *vk)
|
|
{
|
|
u32 boot_status;
|
|
u32 fw_status;
|
|
u32 load_type = 0; /* default for unknown */
|
|
|
|
boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
|
|
fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
|
|
|
|
if (!BCM_VK_INTF_IS_DOWN(boot_status) && (boot_status & SRAM_OPEN))
|
|
load_type = VK_IMAGE_TYPE_BOOT1;
|
|
else if (boot_status == BOOT1_RUNNING)
|
|
load_type = VK_IMAGE_TYPE_BOOT2;
|
|
|
|
/* Log status so that we know different stages */
|
|
dev_info(&vk->pdev->dev,
|
|
"boot-status value for next image: 0x%x : fw-status 0x%x\n",
|
|
boot_status, fw_status);
|
|
|
|
return load_type;
|
|
}
|
|
|
|
static enum soc_idx get_soc_idx(struct bcm_vk *vk)
|
|
{
|
|
struct pci_dev *pdev = vk->pdev;
|
|
enum soc_idx idx = VK_IDX_INVALID;
|
|
u32 rev;
|
|
static enum soc_idx const vk_soc_tab[] = { VALKYRIE_A0, VALKYRIE_B0 };
|
|
|
|
switch (pdev->device) {
|
|
case PCI_DEVICE_ID_VALKYRIE:
|
|
/* get the chip id to decide sub-class */
|
|
rev = MAJOR_SOC_REV(vkread32(vk, BAR_0, BAR_CHIP_ID));
|
|
if (rev < ARRAY_SIZE(vk_soc_tab)) {
|
|
idx = vk_soc_tab[rev];
|
|
} else {
|
|
/* Default to A0 firmware for all other chip revs */
|
|
idx = VALKYRIE_A0;
|
|
dev_warn(&pdev->dev,
|
|
"Rev %d not in image lookup table, default to idx=%d\n",
|
|
rev, idx);
|
|
}
|
|
break;
|
|
|
|
case PCI_DEVICE_ID_VIPER:
|
|
idx = VIPER;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&pdev->dev, "no images for 0x%x\n", pdev->device);
|
|
}
|
|
return idx;
|
|
}
|
|
|
|
static const char *get_load_fw_name(struct bcm_vk *vk,
|
|
const struct load_image_entry *entry)
|
|
{
|
|
const struct firmware *fw;
|
|
struct device *dev = &vk->pdev->dev;
|
|
int ret;
|
|
unsigned long dummy;
|
|
int i;
|
|
|
|
for (i = 0; i < IMG_PER_TYPE_MAX; i++) {
|
|
fw = NULL;
|
|
ret = request_partial_firmware_into_buf(&fw,
|
|
entry->image_name[i],
|
|
dev, &dummy,
|
|
sizeof(dummy),
|
|
0);
|
|
release_firmware(fw);
|
|
if (!ret)
|
|
return entry->image_name[i];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
int bcm_vk_auto_load_all_images(struct bcm_vk *vk)
|
|
{
|
|
int i, ret = -1;
|
|
enum soc_idx idx;
|
|
struct device *dev = &vk->pdev->dev;
|
|
u32 curr_type;
|
|
const char *curr_name;
|
|
|
|
idx = get_soc_idx(vk);
|
|
if (idx == VK_IDX_INVALID)
|
|
goto auto_load_all_exit;
|
|
|
|
/* log a message to know the relative loading order */
|
|
dev_dbg(dev, "Load All for device %d\n", vk->devid);
|
|
|
|
for (i = 0; i < NUM_BOOT_STAGES; i++) {
|
|
curr_type = image_tab[idx][i].image_type;
|
|
if (bcm_vk_next_boot_image(vk) == curr_type) {
|
|
curr_name = get_load_fw_name(vk, &image_tab[idx][i]);
|
|
if (!curr_name) {
|
|
dev_err(dev, "No suitable firmware exists for type %d",
|
|
curr_type);
|
|
ret = -ENOENT;
|
|
goto auto_load_all_exit;
|
|
}
|
|
ret = bcm_vk_load_image_by_type(vk, curr_type,
|
|
curr_name);
|
|
dev_info(dev, "Auto load %s, ret %d\n",
|
|
curr_name, ret);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "Error loading default %s\n",
|
|
curr_name);
|
|
goto auto_load_all_exit;
|
|
}
|
|
}
|
|
}
|
|
|
|
auto_load_all_exit:
|
|
return ret;
|
|
}
|
|
|
|
static int bcm_vk_trigger_autoload(struct bcm_vk *vk)
|
|
{
|
|
if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0)
|
|
return -EPERM;
|
|
|
|
set_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
|
|
queue_work(vk->wq_thread, &vk->wq_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* deferred work queue for draining and auto download.
|
|
*/
|
|
static void bcm_vk_wq_handler(struct work_struct *work)
|
|
{
|
|
struct bcm_vk *vk = container_of(work, struct bcm_vk, wq_work);
|
|
struct device *dev = &vk->pdev->dev;
|
|
s32 ret;
|
|
|
|
/* check wq offload bit map to perform various operations */
|
|
if (test_bit(BCM_VK_WQ_NOTF_PEND, vk->wq_offload)) {
|
|
/* clear bit right the way for notification */
|
|
clear_bit(BCM_VK_WQ_NOTF_PEND, vk->wq_offload);
|
|
bcm_vk_handle_notf(vk);
|
|
}
|
|
if (test_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload)) {
|
|
bcm_vk_auto_load_all_images(vk);
|
|
|
|
/*
|
|
* at the end of operation, clear AUTO bit and pending
|
|
* bit
|
|
*/
|
|
clear_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload);
|
|
clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
|
|
}
|
|
|
|
/* next, try to drain */
|
|
ret = bcm_to_h_msg_dequeue(vk);
|
|
|
|
if (ret == 0)
|
|
dev_dbg(dev, "Spurious trigger for workqueue\n");
|
|
else if (ret < 0)
|
|
bcm_vk_blk_drv_access(vk);
|
|
}
|
|
|
|
static long bcm_vk_load_image(struct bcm_vk *vk,
|
|
const struct vk_image __user *arg)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
const char *image_name;
|
|
struct vk_image image;
|
|
u32 next_loadable;
|
|
enum soc_idx idx;
|
|
int image_idx;
|
|
int ret = -EPERM;
|
|
|
|
if (copy_from_user(&image, arg, sizeof(image)))
|
|
return -EACCES;
|
|
|
|
if ((image.type != VK_IMAGE_TYPE_BOOT1) &&
|
|
(image.type != VK_IMAGE_TYPE_BOOT2)) {
|
|
dev_err(dev, "invalid image.type %u\n", image.type);
|
|
return ret;
|
|
}
|
|
|
|
next_loadable = bcm_vk_next_boot_image(vk);
|
|
if (next_loadable != image.type) {
|
|
dev_err(dev, "Next expected image %u, Loading %u\n",
|
|
next_loadable, image.type);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* if something is pending download already. This could only happen
|
|
* for now when the driver is being loaded, or if someone has issued
|
|
* another download command in another shell.
|
|
*/
|
|
if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0) {
|
|
dev_err(dev, "Download operation already pending.\n");
|
|
return ret;
|
|
}
|
|
|
|
image_name = image.filename;
|
|
if (image_name[0] == '\0') {
|
|
/* Use default image name if NULL */
|
|
idx = get_soc_idx(vk);
|
|
if (idx == VK_IDX_INVALID)
|
|
goto err_idx;
|
|
|
|
/* Image idx starts with boot1 */
|
|
image_idx = image.type - VK_IMAGE_TYPE_BOOT1;
|
|
image_name = get_load_fw_name(vk, &image_tab[idx][image_idx]);
|
|
if (!image_name) {
|
|
dev_err(dev, "No suitable image found for type %d",
|
|
image.type);
|
|
ret = -ENOENT;
|
|
goto err_idx;
|
|
}
|
|
} else {
|
|
/* Ensure filename is NULL terminated */
|
|
image.filename[sizeof(image.filename) - 1] = '\0';
|
|
}
|
|
ret = bcm_vk_load_image_by_type(vk, image.type, image_name);
|
|
dev_info(dev, "Load %s, ret %d\n", image_name, ret);
|
|
err_idx:
|
|
clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm_vk_reset_successful(struct bcm_vk *vk)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
u32 fw_status, reset_reason;
|
|
int ret = -EAGAIN;
|
|
|
|
/*
|
|
* Reset could be triggered when the card in several state:
|
|
* i) in bootROM
|
|
* ii) after boot1
|
|
* iii) boot2 running
|
|
*
|
|
* i) & ii) - no status bits will be updated. If vkboot1
|
|
* runs automatically after reset, it will update the reason
|
|
* to be unknown reason
|
|
* iii) - reboot reason match + deinit done.
|
|
*/
|
|
fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
|
|
/* immediate exit if interface goes down */
|
|
if (BCM_VK_INTF_IS_DOWN(fw_status)) {
|
|
dev_err(dev, "PCIe Intf Down!\n");
|
|
goto reset_exit;
|
|
}
|
|
|
|
reset_reason = (fw_status & VK_FWSTS_RESET_REASON_MASK);
|
|
if ((reset_reason == VK_FWSTS_RESET_MBOX_DB) ||
|
|
(reset_reason == VK_FWSTS_RESET_UNKNOWN))
|
|
ret = 0;
|
|
|
|
/*
|
|
* if some of the deinit bits are set, but done
|
|
* bit is not, this is a failure if triggered while boot2 is running
|
|
*/
|
|
if ((fw_status & VK_FWSTS_DEINIT_TRIGGERED) &&
|
|
!(fw_status & VK_FWSTS_RESET_DONE))
|
|
ret = -EAGAIN;
|
|
|
|
reset_exit:
|
|
dev_dbg(dev, "FW status = 0x%x ret %d\n", fw_status, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void bcm_to_v_reset_doorbell(struct bcm_vk *vk, u32 db_val)
|
|
{
|
|
vkwrite32(vk, db_val, BAR_0, VK_BAR0_RESET_DB_BASE);
|
|
}
|
|
|
|
static int bcm_vk_trigger_reset(struct bcm_vk *vk)
|
|
{
|
|
u32 i;
|
|
u32 value, boot_status;
|
|
bool is_stdalone, is_boot2;
|
|
static const u32 bar0_reg_clr_list[] = { BAR_OS_UPTIME,
|
|
BAR_INTF_VER,
|
|
BAR_CARD_VOLTAGE,
|
|
BAR_CARD_TEMPERATURE,
|
|
BAR_CARD_PWR_AND_THRE };
|
|
|
|
/* clean up before pressing the door bell */
|
|
bcm_vk_drain_msg_on_reset(vk);
|
|
vkwrite32(vk, 0, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
|
|
/* make tag '\0' terminated */
|
|
vkwrite32(vk, 0, BAR_1, VK_BAR1_BOOT1_VER_TAG);
|
|
|
|
for (i = 0; i < VK_BAR1_DAUTH_MAX; i++) {
|
|
vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_STORE_ADDR(i));
|
|
vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_VALID_ADDR(i));
|
|
}
|
|
for (i = 0; i < VK_BAR1_SOTP_REVID_MAX; i++)
|
|
vkwrite32(vk, 0, BAR_1, VK_BAR1_SOTP_REVID_ADDR(i));
|
|
|
|
memset(&vk->card_info, 0, sizeof(vk->card_info));
|
|
memset(&vk->peerlog_info, 0, sizeof(vk->peerlog_info));
|
|
memset(&vk->proc_mon_info, 0, sizeof(vk->proc_mon_info));
|
|
memset(&vk->alert_cnts, 0, sizeof(vk->alert_cnts));
|
|
|
|
/*
|
|
* When boot request fails, the CODE_PUSH_OFFSET stays persistent.
|
|
* Allowing us to debug the failure. When we call reset,
|
|
* we should clear CODE_PUSH_OFFSET so ROM does not execute
|
|
* boot again (and fails again) and instead waits for a new
|
|
* codepush. And, if previous boot has encountered error, need
|
|
* to clear the entry values
|
|
*/
|
|
boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
|
|
if (boot_status & BOOT_ERR_MASK) {
|
|
dev_info(&vk->pdev->dev,
|
|
"Card in boot error 0x%x, clear CODEPUSH val\n",
|
|
boot_status);
|
|
value = 0;
|
|
} else {
|
|
value = vkread32(vk, BAR_0, BAR_CODEPUSH_SBL);
|
|
value &= CODEPUSH_MASK;
|
|
}
|
|
vkwrite32(vk, value, BAR_0, BAR_CODEPUSH_SBL);
|
|
|
|
/* special reset handling */
|
|
is_stdalone = boot_status & BOOT_STDALONE_RUNNING;
|
|
is_boot2 = (boot_status & BOOT_STATE_MASK) == BOOT2_RUNNING;
|
|
if (vk->peer_alert.flags & ERR_LOG_RAMDUMP) {
|
|
/*
|
|
* if card is in ramdump mode, it is hitting an error. Don't
|
|
* reset the reboot reason as it will contain valid info that
|
|
* is important - simply use special reset
|
|
*/
|
|
vkwrite32(vk, VK_BAR0_RESET_RAMPDUMP, BAR_0, VK_BAR_FWSTS);
|
|
return VK_BAR0_RESET_RAMPDUMP;
|
|
} else if (is_stdalone && !is_boot2) {
|
|
dev_info(&vk->pdev->dev, "Hard reset on Standalone mode");
|
|
bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_HARD);
|
|
return VK_BAR0_RESET_DB_HARD;
|
|
}
|
|
|
|
/* reset fw_status with proper reason, and press db */
|
|
vkwrite32(vk, VK_FWSTS_RESET_MBOX_DB, BAR_0, VK_BAR_FWSTS);
|
|
bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_SOFT);
|
|
|
|
/* clear other necessary registers and alert records */
|
|
for (i = 0; i < ARRAY_SIZE(bar0_reg_clr_list); i++)
|
|
vkwrite32(vk, 0, BAR_0, bar0_reg_clr_list[i]);
|
|
memset(&vk->host_alert, 0, sizeof(vk->host_alert));
|
|
memset(&vk->peer_alert, 0, sizeof(vk->peer_alert));
|
|
/* clear 4096 bits of bitmap */
|
|
bitmap_clear(vk->bmap, 0, VK_MSG_ID_BITMAP_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long bcm_vk_reset(struct bcm_vk *vk, struct vk_reset __user *arg)
|
|
{
|
|
struct device *dev = &vk->pdev->dev;
|
|
struct vk_reset reset;
|
|
int ret = 0;
|
|
u32 ramdump_reset;
|
|
int special_reset;
|
|
|
|
if (copy_from_user(&reset, arg, sizeof(struct vk_reset)))
|
|
return -EFAULT;
|
|
|
|
/* check if any download is in-progress, if so return error */
|
|
if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0) {
|
|
dev_err(dev, "Download operation pending - skip reset.\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
ramdump_reset = vk->peer_alert.flags & ERR_LOG_RAMDUMP;
|
|
dev_info(dev, "Issue Reset %s\n",
|
|
ramdump_reset ? "in ramdump mode" : "");
|
|
|
|
/*
|
|
* The following is the sequence of reset:
|
|
* - send card level graceful shut down
|
|
* - wait enough time for VK to handle its business, stopping DMA etc
|
|
* - kill host apps
|
|
* - Trigger interrupt with DB
|
|
*/
|
|
bcm_vk_send_shutdown_msg(vk, VK_SHUTDOWN_GRACEFUL, 0, 0);
|
|
|
|
spin_lock(&vk->ctx_lock);
|
|
if (!vk->reset_pid) {
|
|
vk->reset_pid = task_pid_nr(current);
|
|
} else {
|
|
dev_err(dev, "Reset already launched by process pid %d\n",
|
|
vk->reset_pid);
|
|
ret = -EACCES;
|
|
}
|
|
spin_unlock(&vk->ctx_lock);
|
|
if (ret)
|
|
goto err_exit;
|
|
|
|
bcm_vk_blk_drv_access(vk);
|
|
special_reset = bcm_vk_trigger_reset(vk);
|
|
|
|
/*
|
|
* Wait enough time for card os to deinit
|
|
* and populate the reset reason.
|
|
*/
|
|
msleep(BCM_VK_DEINIT_TIME_MS);
|
|
|
|
if (special_reset) {
|
|
/* if it is special ramdump reset, return the type to user */
|
|
reset.arg2 = special_reset;
|
|
if (copy_to_user(arg, &reset, sizeof(reset)))
|
|
ret = -EFAULT;
|
|
} else {
|
|
ret = bcm_vk_reset_successful(vk);
|
|
}
|
|
|
|
err_exit:
|
|
clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload);
|
|
return ret;
|
|
}
|
|
|
|
static int bcm_vk_mmap(struct file *file, struct vm_area_struct *vma)
|
|
{
|
|
struct bcm_vk_ctx *ctx = file->private_data;
|
|
struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, miscdev);
|
|
unsigned long pg_size;
|
|
|
|
/* only BAR2 is mmap possible, which is bar num 4 due to 64bit */
|
|
#define VK_MMAPABLE_BAR 4
|
|
|
|
pg_size = ((pci_resource_len(vk->pdev, VK_MMAPABLE_BAR) - 1)
|
|
>> PAGE_SHIFT) + 1;
|
|
if (vma->vm_pgoff + vma_pages(vma) > pg_size)
|
|
return -EINVAL;
|
|
|
|
vma->vm_pgoff += (pci_resource_start(vk->pdev, VK_MMAPABLE_BAR)
|
|
>> PAGE_SHIFT);
|
|
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
|
|
|
|
return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
|
|
vma->vm_end - vma->vm_start,
|
|
vma->vm_page_prot);
|
|
}
|
|
|
|
static long bcm_vk_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
long ret = -EINVAL;
|
|
struct bcm_vk_ctx *ctx = file->private_data;
|
|
struct bcm_vk *vk = container_of(ctx->miscdev, struct bcm_vk, miscdev);
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
dev_dbg(&vk->pdev->dev,
|
|
"ioctl, cmd=0x%02x, arg=0x%02lx\n",
|
|
cmd, arg);
|
|
|
|
mutex_lock(&vk->mutex);
|
|
|
|
switch (cmd) {
|
|
case VK_IOCTL_LOAD_IMAGE:
|
|
ret = bcm_vk_load_image(vk, argp);
|
|
break;
|
|
|
|
case VK_IOCTL_RESET:
|
|
ret = bcm_vk_reset(vk, argp);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&vk->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct file_operations bcm_vk_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = bcm_vk_open,
|
|
.read = bcm_vk_read,
|
|
.write = bcm_vk_write,
|
|
.poll = bcm_vk_poll,
|
|
.release = bcm_vk_release,
|
|
.mmap = bcm_vk_mmap,
|
|
.unlocked_ioctl = bcm_vk_ioctl,
|
|
};
|
|
|
|
static int bcm_vk_on_panic(struct notifier_block *nb,
|
|
unsigned long e, void *p)
|
|
{
|
|
struct bcm_vk *vk = container_of(nb, struct bcm_vk, panic_nb);
|
|
|
|
bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_HARD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
int err;
|
|
int i;
|
|
int id;
|
|
int irq;
|
|
char name[20];
|
|
struct bcm_vk *vk;
|
|
struct device *dev = &pdev->dev;
|
|
struct miscdevice *misc_device;
|
|
u32 boot_status;
|
|
|
|
/* allocate vk structure which is tied to kref for freeing */
|
|
vk = kzalloc(sizeof(*vk), GFP_KERNEL);
|
|
if (!vk)
|
|
return -ENOMEM;
|
|
|
|
kref_init(&vk->kref);
|
|
if (nr_ib_sgl_blk > BCM_VK_IB_SGL_BLK_MAX) {
|
|
dev_warn(dev, "Inband SGL blk %d limited to max %d\n",
|
|
nr_ib_sgl_blk, BCM_VK_IB_SGL_BLK_MAX);
|
|
nr_ib_sgl_blk = BCM_VK_IB_SGL_BLK_MAX;
|
|
}
|
|
vk->ib_sgl_size = nr_ib_sgl_blk * VK_MSGQ_BLK_SIZE;
|
|
mutex_init(&vk->mutex);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
dev_err(dev, "Cannot enable PCI device\n");
|
|
goto err_free_exit;
|
|
}
|
|
vk->pdev = pci_dev_get(pdev);
|
|
|
|
err = pci_request_regions(pdev, DRV_MODULE_NAME);
|
|
if (err) {
|
|
dev_err(dev, "Cannot obtain PCI resources\n");
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
/* make sure DMA is good */
|
|
err = dma_set_mask_and_coherent(&pdev->dev,
|
|
DMA_BIT_MASK(BCM_VK_DMA_BITS));
|
|
if (err) {
|
|
dev_err(dev, "failed to set DMA mask\n");
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
/* The tdma is a scratch area for some DMA testings. */
|
|
if (nr_scratch_pages) {
|
|
vk->tdma_vaddr = dma_alloc_coherent
|
|
(dev,
|
|
nr_scratch_pages * PAGE_SIZE,
|
|
&vk->tdma_addr, GFP_KERNEL);
|
|
if (!vk->tdma_vaddr) {
|
|
err = -ENOMEM;
|
|
goto err_disable_pdev;
|
|
}
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_set_drvdata(pdev, vk);
|
|
|
|
irq = pci_alloc_irq_vectors(pdev,
|
|
1,
|
|
VK_MSIX_IRQ_MAX,
|
|
PCI_IRQ_MSI | PCI_IRQ_MSIX);
|
|
|
|
if (irq < VK_MSIX_IRQ_MIN_REQ) {
|
|
dev_err(dev, "failed to get min %d MSIX interrupts, irq(%d)\n",
|
|
VK_MSIX_IRQ_MIN_REQ, irq);
|
|
err = (irq >= 0) ? -EINVAL : irq;
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
if (irq != VK_MSIX_IRQ_MAX)
|
|
dev_warn(dev, "Number of IRQs %d allocated - requested(%d).\n",
|
|
irq, VK_MSIX_IRQ_MAX);
|
|
|
|
for (i = 0; i < MAX_BAR; i++) {
|
|
/* multiple by 2 for 64 bit BAR mapping */
|
|
vk->bar[i] = pci_ioremap_bar(pdev, i * 2);
|
|
if (!vk->bar[i]) {
|
|
dev_err(dev, "failed to remap BAR%d\n", i);
|
|
err = -ENOMEM;
|
|
goto err_iounmap;
|
|
}
|
|
}
|
|
|
|
for (vk->num_irqs = 0;
|
|
vk->num_irqs < VK_MSIX_MSGQ_MAX;
|
|
vk->num_irqs++) {
|
|
err = devm_request_irq(dev, pci_irq_vector(pdev, vk->num_irqs),
|
|
bcm_vk_msgq_irqhandler,
|
|
IRQF_SHARED, DRV_MODULE_NAME, vk);
|
|
if (err) {
|
|
dev_err(dev, "failed to request msgq IRQ %d for MSIX %d\n",
|
|
pdev->irq + vk->num_irqs, vk->num_irqs + 1);
|
|
goto err_irq;
|
|
}
|
|
}
|
|
/* one irq for notification from VK */
|
|
err = devm_request_irq(dev, pci_irq_vector(pdev, vk->num_irqs),
|
|
bcm_vk_notf_irqhandler,
|
|
IRQF_SHARED, DRV_MODULE_NAME, vk);
|
|
if (err) {
|
|
dev_err(dev, "failed to request notf IRQ %d for MSIX %d\n",
|
|
pdev->irq + vk->num_irqs, vk->num_irqs + 1);
|
|
goto err_irq;
|
|
}
|
|
vk->num_irqs++;
|
|
|
|
for (i = 0;
|
|
(i < VK_MSIX_TTY_MAX) && (vk->num_irqs < irq);
|
|
i++, vk->num_irqs++) {
|
|
err = devm_request_irq(dev, pci_irq_vector(pdev, vk->num_irqs),
|
|
bcm_vk_tty_irqhandler,
|
|
IRQF_SHARED, DRV_MODULE_NAME, vk);
|
|
if (err) {
|
|
dev_err(dev, "failed request tty IRQ %d for MSIX %d\n",
|
|
pdev->irq + vk->num_irqs, vk->num_irqs + 1);
|
|
goto err_irq;
|
|
}
|
|
bcm_vk_tty_set_irq_enabled(vk, i);
|
|
}
|
|
|
|
id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL);
|
|
if (id < 0) {
|
|
err = id;
|
|
dev_err(dev, "unable to get id\n");
|
|
goto err_irq;
|
|
}
|
|
|
|
vk->devid = id;
|
|
snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
|
|
misc_device = &vk->miscdev;
|
|
misc_device->minor = MISC_DYNAMIC_MINOR;
|
|
misc_device->name = kstrdup(name, GFP_KERNEL);
|
|
if (!misc_device->name) {
|
|
err = -ENOMEM;
|
|
goto err_ida_remove;
|
|
}
|
|
misc_device->fops = &bcm_vk_fops,
|
|
|
|
err = misc_register(misc_device);
|
|
if (err) {
|
|
dev_err(dev, "failed to register device\n");
|
|
goto err_kfree_name;
|
|
}
|
|
|
|
INIT_WORK(&vk->wq_work, bcm_vk_wq_handler);
|
|
|
|
/* create dedicated workqueue */
|
|
vk->wq_thread = create_singlethread_workqueue(name);
|
|
if (!vk->wq_thread) {
|
|
dev_err(dev, "Fail to create workqueue thread\n");
|
|
err = -ENOMEM;
|
|
goto err_misc_deregister;
|
|
}
|
|
|
|
err = bcm_vk_msg_init(vk);
|
|
if (err) {
|
|
dev_err(dev, "failed to init msg queue info\n");
|
|
goto err_destroy_workqueue;
|
|
}
|
|
|
|
/* sync other info */
|
|
bcm_vk_sync_card_info(vk);
|
|
|
|
/* register for panic notifier */
|
|
vk->panic_nb.notifier_call = bcm_vk_on_panic;
|
|
err = atomic_notifier_chain_register(&panic_notifier_list,
|
|
&vk->panic_nb);
|
|
if (err) {
|
|
dev_err(dev, "Fail to register panic notifier\n");
|
|
goto err_destroy_workqueue;
|
|
}
|
|
|
|
snprintf(name, sizeof(name), KBUILD_MODNAME ".%d_ttyVK", id);
|
|
err = bcm_vk_tty_init(vk, name);
|
|
if (err)
|
|
goto err_unregister_panic_notifier;
|
|
|
|
/*
|
|
* lets trigger an auto download. We don't want to do it serially here
|
|
* because at probing time, it is not supposed to block for a long time.
|
|
*/
|
|
boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
|
|
if (auto_load) {
|
|
if ((boot_status & BOOT_STATE_MASK) == BROM_RUNNING) {
|
|
err = bcm_vk_trigger_autoload(vk);
|
|
if (err)
|
|
goto err_bcm_vk_tty_exit;
|
|
} else {
|
|
dev_err(dev,
|
|
"Auto-load skipped - BROM not in proper state (0x%x)\n",
|
|
boot_status);
|
|
}
|
|
}
|
|
|
|
/* enable hb */
|
|
bcm_vk_hb_init(vk);
|
|
|
|
dev_dbg(dev, "BCM-VK:%u created\n", id);
|
|
|
|
return 0;
|
|
|
|
err_bcm_vk_tty_exit:
|
|
bcm_vk_tty_exit(vk);
|
|
|
|
err_unregister_panic_notifier:
|
|
atomic_notifier_chain_unregister(&panic_notifier_list,
|
|
&vk->panic_nb);
|
|
|
|
err_destroy_workqueue:
|
|
destroy_workqueue(vk->wq_thread);
|
|
|
|
err_misc_deregister:
|
|
misc_deregister(misc_device);
|
|
|
|
err_kfree_name:
|
|
kfree(misc_device->name);
|
|
misc_device->name = NULL;
|
|
|
|
err_ida_remove:
|
|
ida_simple_remove(&bcm_vk_ida, id);
|
|
|
|
err_irq:
|
|
for (i = 0; i < vk->num_irqs; i++)
|
|
devm_free_irq(dev, pci_irq_vector(pdev, i), vk);
|
|
|
|
pci_disable_msix(pdev);
|
|
pci_disable_msi(pdev);
|
|
|
|
err_iounmap:
|
|
for (i = 0; i < MAX_BAR; i++) {
|
|
if (vk->bar[i])
|
|
pci_iounmap(pdev, vk->bar[i]);
|
|
}
|
|
pci_release_regions(pdev);
|
|
|
|
err_disable_pdev:
|
|
if (vk->tdma_vaddr)
|
|
dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
|
|
vk->tdma_vaddr, vk->tdma_addr);
|
|
|
|
pci_free_irq_vectors(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_dev_put(pdev);
|
|
|
|
err_free_exit:
|
|
kfree(vk);
|
|
|
|
return err;
|
|
}
|
|
|
|
void bcm_vk_release_data(struct kref *kref)
|
|
{
|
|
struct bcm_vk *vk = container_of(kref, struct bcm_vk, kref);
|
|
struct pci_dev *pdev = vk->pdev;
|
|
|
|
dev_dbg(&pdev->dev, "BCM-VK:%d release data 0x%p\n", vk->devid, vk);
|
|
pci_dev_put(pdev);
|
|
kfree(vk);
|
|
}
|
|
|
|
static void bcm_vk_remove(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
struct bcm_vk *vk = pci_get_drvdata(pdev);
|
|
struct miscdevice *misc_device = &vk->miscdev;
|
|
|
|
bcm_vk_hb_deinit(vk);
|
|
|
|
/*
|
|
* Trigger a reset to card and wait enough time for UCODE to rerun,
|
|
* which re-initialize the card into its default state.
|
|
* This ensures when driver is re-enumerated it will start from
|
|
* a completely clean state.
|
|
*/
|
|
bcm_vk_trigger_reset(vk);
|
|
usleep_range(BCM_VK_UCODE_BOOT_US, BCM_VK_UCODE_BOOT_MAX_US);
|
|
|
|
/* unregister panic notifier */
|
|
atomic_notifier_chain_unregister(&panic_notifier_list,
|
|
&vk->panic_nb);
|
|
|
|
bcm_vk_msg_remove(vk);
|
|
bcm_vk_tty_exit(vk);
|
|
|
|
if (vk->tdma_vaddr)
|
|
dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
|
|
vk->tdma_vaddr, vk->tdma_addr);
|
|
|
|
/* remove if name is set which means misc dev registered */
|
|
if (misc_device->name) {
|
|
misc_deregister(misc_device);
|
|
kfree(misc_device->name);
|
|
ida_simple_remove(&bcm_vk_ida, vk->devid);
|
|
}
|
|
for (i = 0; i < vk->num_irqs; i++)
|
|
devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), vk);
|
|
|
|
pci_disable_msix(pdev);
|
|
pci_disable_msi(pdev);
|
|
|
|
cancel_work_sync(&vk->wq_work);
|
|
destroy_workqueue(vk->wq_thread);
|
|
bcm_vk_tty_wq_exit(vk);
|
|
|
|
for (i = 0; i < MAX_BAR; i++) {
|
|
if (vk->bar[i])
|
|
pci_iounmap(pdev, vk->bar[i]);
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "BCM-VK:%d released\n", vk->devid);
|
|
|
|
pci_release_regions(pdev);
|
|
pci_free_irq_vectors(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
kref_put(&vk->kref, bcm_vk_release_data);
|
|
}
|
|
|
|
static void bcm_vk_shutdown(struct pci_dev *pdev)
|
|
{
|
|
struct bcm_vk *vk = pci_get_drvdata(pdev);
|
|
u32 reg, boot_stat;
|
|
|
|
reg = vkread32(vk, BAR_0, BAR_BOOT_STATUS);
|
|
boot_stat = reg & BOOT_STATE_MASK;
|
|
|
|
if (boot_stat == BOOT1_RUNNING) {
|
|
/* simply trigger a reset interrupt to park it */
|
|
bcm_vk_trigger_reset(vk);
|
|
} else if (boot_stat == BROM_NOT_RUN) {
|
|
int err;
|
|
u16 lnksta;
|
|
|
|
/*
|
|
* The boot status only reflects boot condition since last reset
|
|
* As ucode will run only once to configure pcie, if multiple
|
|
* resets happen, we lost track if ucode has run or not.
|
|
* Here, read the current link speed and use that to
|
|
* sync up the bootstatus properly so that on reboot-back-up,
|
|
* it has the proper state to start with autoload
|
|
*/
|
|
err = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
|
|
if (!err &&
|
|
(lnksta & PCI_EXP_LNKSTA_CLS) != PCI_EXP_LNKSTA_CLS_2_5GB) {
|
|
reg |= BROM_STATUS_COMPLETE;
|
|
vkwrite32(vk, reg, BAR_0, BAR_BOOT_STATUS);
|
|
}
|
|
}
|
|
}
|
|
|
|
static const struct pci_device_id bcm_vk_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VALKYRIE), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VIPER), },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, bcm_vk_ids);
|
|
|
|
static struct pci_driver pci_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = bcm_vk_ids,
|
|
.probe = bcm_vk_probe,
|
|
.remove = bcm_vk_remove,
|
|
.shutdown = bcm_vk_shutdown,
|
|
};
|
|
module_pci_driver(pci_driver);
|
|
|
|
MODULE_DESCRIPTION("Broadcom VK Host Driver");
|
|
MODULE_AUTHOR("Scott Branden <scott.branden@broadcom.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_VERSION("1.0");
|