mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 13:44:15 +08:00
64ca77d9f5
snd_soc_dai_set_drvdata is not needed when the set data comes from snd_soc_dai_get_drvdata or dev_get_drvdata. The problem was fixed usingthe following semantic patch: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y,e; @@ x = dev_get_drvdata(y->dev) ... when != x = e - snd_soc_dai_set_drvdata(y,x); @@ expression x,y,e; @@ x = snd_soc_dai_get_drvdata(y) ... when != x = e - snd_soc_dai_set_drvdata(y,x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20210213101907.1318496-2-Julia.Lawall@inria.fr Signed-off-by: Mark Brown <broonie@kernel.org>
586 lines
13 KiB
C
586 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* linux/sound/soc/pxa/mmp-sspa.c
|
|
* Base on pxa2xx-ssp.c
|
|
*
|
|
* Copyright (C) 2011 Marvell International Ltd.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
#include "mmp-sspa.h"
|
|
|
|
/*
|
|
* SSPA audio private data
|
|
*/
|
|
struct sspa_priv {
|
|
void __iomem *tx_base;
|
|
void __iomem *rx_base;
|
|
|
|
struct snd_dmaengine_dai_dma_data playback_dma_data;
|
|
struct snd_dmaengine_dai_dma_data capture_dma_data;
|
|
struct clk *clk;
|
|
struct clk *audio_clk;
|
|
struct clk *sysclk;
|
|
|
|
int running_cnt;
|
|
u32 sp;
|
|
u32 ctrl;
|
|
};
|
|
|
|
static void mmp_sspa_tx_enable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp &= ~SSPA_SP_MSL;
|
|
sspa_sp |= SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);
|
|
}
|
|
|
|
static void mmp_sspa_tx_disable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp &= ~SSPA_SP_MSL;
|
|
sspa_sp &= ~SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);
|
|
}
|
|
|
|
static void mmp_sspa_rx_enable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp |= SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);
|
|
}
|
|
|
|
static void mmp_sspa_rx_disable(struct sspa_priv *sspa)
|
|
{
|
|
unsigned int sspa_sp = sspa->sp;
|
|
|
|
sspa_sp &= ~SSPA_SP_S_EN;
|
|
sspa_sp |= SSPA_SP_WEN;
|
|
__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);
|
|
}
|
|
|
|
static int mmp_sspa_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
|
|
clk_prepare_enable(sspa->sysclk);
|
|
clk_prepare_enable(sspa->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmp_sspa_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
|
|
clk_disable_unprepare(sspa->clk);
|
|
clk_disable_unprepare(sspa->sysclk);
|
|
}
|
|
|
|
/*
|
|
* Set the SSP ports SYSCLK.
|
|
*/
|
|
static int mmp_sspa_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct device *dev = cpu_dai->component->dev;
|
|
int ret = 0;
|
|
|
|
if (dev->of_node)
|
|
return -ENOTSUPP;
|
|
|
|
switch (clk_id) {
|
|
case MMP_SSPA_CLK_AUDIO:
|
|
ret = clk_set_rate(sspa->audio_clk, freq);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case MMP_SSPA_CLK_PLL:
|
|
case MMP_SSPA_CLK_VCXO:
|
|
/* not support yet */
|
|
return -EINVAL;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmp_sspa_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id,
|
|
int source, unsigned int freq_in,
|
|
unsigned int freq_out)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct device *dev = cpu_dai->component->dev;
|
|
int ret = 0;
|
|
|
|
if (dev->of_node)
|
|
return -ENOTSUPP;
|
|
|
|
switch (pll_id) {
|
|
case MMP_SYSCLK:
|
|
ret = clk_set_rate(sspa->sysclk, freq_out);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case MMP_SSPA_CLK:
|
|
ret = clk_set_rate(sspa->clk, freq_out);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up the sspa dai format.
|
|
*/
|
|
static int mmp_sspa_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
/* reset port settings */
|
|
sspa->sp = SSPA_SP_WEN | SSPA_SP_S_RST | SSPA_SP_FFLUSH;
|
|
sspa->ctrl = 0;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
sspa->sp |= SSPA_SP_MSL;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
sspa->sp |= SSPA_SP_FSP;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sspa->ctrl |= SSPA_CTL_XDATDLY(1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Since we are configuring the timings for the format by hand
|
|
* we have to defer some things until hw_params() where we
|
|
* know parameters like the sample size.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the SSPA audio DMA parameters and sample size.
|
|
* Can be called multiple times by oss emulation.
|
|
*/
|
|
static int mmp_sspa_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
struct device *dev = dai->component->dev;
|
|
u32 sspa_ctrl = sspa->ctrl;
|
|
int bits;
|
|
int bitval;
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S8:
|
|
bits = 8;
|
|
bitval = SSPA_CTL_8_BITS;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
bits = 16;
|
|
bitval = SSPA_CTL_16_BITS;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_3LE:
|
|
bits = 24;
|
|
bitval = SSPA_CTL_24_BITS;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
bits = 32;
|
|
bitval = SSPA_CTL_32_BITS;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XPH;
|
|
if (dev->of_node || params_channels(params) == 2)
|
|
sspa_ctrl |= SSPA_CTL_XPH;
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XWDLEN1_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XWDLEN1(bitval);
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XWDLEN2_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XWDLEN2(bitval);
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XSSZ1_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XSSZ1(bitval);
|
|
|
|
sspa_ctrl &= ~SSPA_CTL_XSSZ2_MASK;
|
|
sspa_ctrl |= SSPA_CTL_XSSZ2(bitval);
|
|
|
|
sspa->sp &= ~SSPA_SP_FWID_MASK;
|
|
sspa->sp |= SSPA_SP_FWID(bits - 1);
|
|
|
|
sspa->sp &= ~SSPA_TXSP_FPER_MASK;
|
|
sspa->sp |= SSPA_TXSP_FPER(bits * 2 - 1);
|
|
|
|
if (dev->of_node) {
|
|
clk_set_rate(sspa->clk, params_rate(params) *
|
|
params_channels(params) * bits);
|
|
}
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
__raw_writel(sspa_ctrl, sspa->tx_base + SSPA_CTL);
|
|
__raw_writel(0x1, sspa->tx_base + SSPA_FIFO_UL);
|
|
} else {
|
|
__raw_writel(sspa_ctrl, sspa->rx_base + SSPA_CTL);
|
|
__raw_writel(0x0, sspa->rx_base + SSPA_FIFO_UL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmp_sspa_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
|
|
int ret = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
/*
|
|
* whatever playback or capture, must enable rx.
|
|
* this is a hw issue, so need check if rx has been
|
|
* enabled or not; if has been enabled by another
|
|
* stream, do not enable again.
|
|
*/
|
|
if (!sspa->running_cnt)
|
|
mmp_sspa_rx_enable(sspa);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
mmp_sspa_tx_enable(sspa);
|
|
|
|
sspa->running_cnt++;
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
sspa->running_cnt--;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
mmp_sspa_tx_disable(sspa);
|
|
|
|
/* have no capture stream, disable rx port */
|
|
if (!sspa->running_cnt)
|
|
mmp_sspa_rx_disable(sspa);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmp_sspa_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct sspa_priv *sspa = dev_get_drvdata(dai->dev);
|
|
|
|
snd_soc_dai_init_dma_data(dai,
|
|
&sspa->playback_dma_data,
|
|
&sspa->capture_dma_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MMP_SSPA_RATES SNDRV_PCM_RATE_8000_192000
|
|
#define MMP_SSPA_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
|
|
SNDRV_PCM_FMTBIT_S16_LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | \
|
|
SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops mmp_sspa_dai_ops = {
|
|
.startup = mmp_sspa_startup,
|
|
.shutdown = mmp_sspa_shutdown,
|
|
.trigger = mmp_sspa_trigger,
|
|
.hw_params = mmp_sspa_hw_params,
|
|
.set_sysclk = mmp_sspa_set_dai_sysclk,
|
|
.set_pll = mmp_sspa_set_dai_pll,
|
|
.set_fmt = mmp_sspa_set_dai_fmt,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver mmp_sspa_dai = {
|
|
.probe = mmp_sspa_probe,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 128,
|
|
.rates = MMP_SSPA_RATES,
|
|
.formats = MMP_SSPA_FORMATS,
|
|
},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = MMP_SSPA_RATES,
|
|
.formats = MMP_SSPA_FORMATS,
|
|
},
|
|
.ops = &mmp_sspa_dai_ops,
|
|
};
|
|
|
|
#define MMP_PCM_INFO (SNDRV_PCM_INFO_MMAP | \
|
|
SNDRV_PCM_INFO_MMAP_VALID | \
|
|
SNDRV_PCM_INFO_INTERLEAVED | \
|
|
SNDRV_PCM_INFO_PAUSE | \
|
|
SNDRV_PCM_INFO_RESUME | \
|
|
SNDRV_PCM_INFO_NO_PERIOD_WAKEUP)
|
|
|
|
static const struct snd_pcm_hardware mmp_pcm_hardware[] = {
|
|
{
|
|
.info = MMP_PCM_INFO,
|
|
.period_bytes_min = 1024,
|
|
.period_bytes_max = 2048,
|
|
.periods_min = 2,
|
|
.periods_max = 32,
|
|
.buffer_bytes_max = 4096,
|
|
.fifo_size = 32,
|
|
},
|
|
{
|
|
.info = MMP_PCM_INFO,
|
|
.period_bytes_min = 1024,
|
|
.period_bytes_max = 2048,
|
|
.periods_min = 2,
|
|
.periods_max = 32,
|
|
.buffer_bytes_max = 4096,
|
|
.fifo_size = 32,
|
|
},
|
|
};
|
|
|
|
static const struct snd_dmaengine_pcm_config mmp_pcm_config = {
|
|
.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
|
|
.pcm_hardware = mmp_pcm_hardware,
|
|
.prealloc_buffer_size = 4096,
|
|
};
|
|
|
|
static int mmp_pcm_mmap(struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
|
|
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
|
|
return remap_pfn_range(vma, vma->vm_start,
|
|
substream->dma_buffer.addr >> PAGE_SHIFT,
|
|
vma->vm_end - vma->vm_start, vma->vm_page_prot);
|
|
}
|
|
|
|
static int mmp_sspa_open(struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
struct sspa_priv *sspa = snd_soc_component_get_drvdata(component);
|
|
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
/* we can only change the settings if the port is not in use */
|
|
if ((__raw_readl(sspa->tx_base + SSPA_SP) & SSPA_SP_S_EN) ||
|
|
(__raw_readl(sspa->rx_base + SSPA_SP) & SSPA_SP_S_EN)) {
|
|
dev_err(component->dev,
|
|
"can't change hardware dai format: stream is in use\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);
|
|
__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);
|
|
|
|
sspa->sp &= ~(SSPA_SP_S_RST | SSPA_SP_FFLUSH);
|
|
__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);
|
|
__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);
|
|
|
|
/*
|
|
* FIXME: hw issue, for the tx serial port,
|
|
* can not config the master/slave mode;
|
|
* so must clean this bit.
|
|
* The master/slave mode has been set in the
|
|
* rx port.
|
|
*/
|
|
__raw_writel(sspa->sp & ~SSPA_SP_MSL, sspa->tx_base + SSPA_SP);
|
|
|
|
__raw_writel(sspa->ctrl, sspa->tx_base + SSPA_CTL);
|
|
__raw_writel(sspa->ctrl, sspa->rx_base + SSPA_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmp_sspa_close(struct snd_soc_component *component,
|
|
struct snd_pcm_substream *substream)
|
|
{
|
|
pm_runtime_put_sync(component->dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_component_driver mmp_sspa_component = {
|
|
.name = "mmp-sspa",
|
|
.mmap = mmp_pcm_mmap,
|
|
.open = mmp_sspa_open,
|
|
.close = mmp_sspa_close,
|
|
};
|
|
|
|
static int asoc_mmp_sspa_probe(struct platform_device *pdev)
|
|
{
|
|
struct sspa_priv *sspa;
|
|
int ret;
|
|
|
|
sspa = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct sspa_priv), GFP_KERNEL);
|
|
if (!sspa)
|
|
return -ENOMEM;
|
|
|
|
if (pdev->dev.of_node) {
|
|
sspa->rx_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(sspa->rx_base))
|
|
return PTR_ERR(sspa->rx_base);
|
|
|
|
sspa->tx_base = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(sspa->tx_base))
|
|
return PTR_ERR(sspa->tx_base);
|
|
|
|
sspa->clk = devm_clk_get(&pdev->dev, "bitclk");
|
|
if (IS_ERR(sspa->clk))
|
|
return PTR_ERR(sspa->clk);
|
|
|
|
sspa->audio_clk = devm_clk_get(&pdev->dev, "audio");
|
|
if (IS_ERR(sspa->audio_clk))
|
|
return PTR_ERR(sspa->audio_clk);
|
|
} else {
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (res == NULL)
|
|
return -ENODEV;
|
|
|
|
sspa->rx_base = devm_ioremap(&pdev->dev, res->start, 0x30);
|
|
if (!sspa->rx_base)
|
|
return -ENOMEM;
|
|
|
|
sspa->tx_base = devm_ioremap(&pdev->dev,
|
|
res->start + 0x80, 0x30);
|
|
if (!sspa->tx_base)
|
|
return -ENOMEM;
|
|
|
|
sspa->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sspa->clk))
|
|
return PTR_ERR(sspa->clk);
|
|
|
|
sspa->audio_clk = clk_get(NULL, "mmp-audio");
|
|
if (IS_ERR(sspa->audio_clk))
|
|
return PTR_ERR(sspa->audio_clk);
|
|
|
|
sspa->sysclk = clk_get(NULL, "mmp-sysclk");
|
|
if (IS_ERR(sspa->sysclk)) {
|
|
clk_put(sspa->audio_clk);
|
|
return PTR_ERR(sspa->sysclk);
|
|
}
|
|
}
|
|
platform_set_drvdata(pdev, sspa);
|
|
|
|
sspa->playback_dma_data.maxburst = 4;
|
|
sspa->capture_dma_data.maxburst = 4;
|
|
/* You know, these addresses are actually ignored. */
|
|
sspa->capture_dma_data.addr = SSPA_D;
|
|
sspa->playback_dma_data.addr = 0x80 + SSPA_D;
|
|
|
|
if (pdev->dev.of_node) {
|
|
ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
|
|
&mmp_pcm_config, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_snd_soc_register_component(&pdev->dev, &mmp_sspa_component,
|
|
&mmp_sspa_dai, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
clk_prepare_enable(sspa->audio_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asoc_mmp_sspa_remove(struct platform_device *pdev)
|
|
{
|
|
struct sspa_priv *sspa = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(sspa->audio_clk);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
if (pdev->dev.of_node)
|
|
return 0;
|
|
|
|
clk_put(sspa->audio_clk);
|
|
clk_put(sspa->sysclk);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id mmp_sspa_of_match[] = {
|
|
{ .compatible = "marvell,mmp-sspa" },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mmp_sspa_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver asoc_mmp_sspa_driver = {
|
|
.driver = {
|
|
.name = "mmp-sspa-dai",
|
|
.of_match_table = of_match_ptr(mmp_sspa_of_match),
|
|
},
|
|
.probe = asoc_mmp_sspa_probe,
|
|
.remove = asoc_mmp_sspa_remove,
|
|
};
|
|
|
|
module_platform_driver(asoc_mmp_sspa_driver);
|
|
|
|
MODULE_AUTHOR("Leo Yan <leoy@marvell.com>");
|
|
MODULE_DESCRIPTION("MMP SSPA SoC Interface");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:mmp-sspa-dai");
|