mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-30 07:34:12 +08:00
88e9a93c9d
All Alchemy chips have coherent DMA, but for example the USB or AC97 peripherals on the Au1000/1500/1100 are not. This patch uses DMA_MAYBE_COHERENT on Alchemy and sets coherentio based on CPU type. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/6576/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
515 lines
14 KiB
C
515 lines
14 KiB
C
/*
|
|
* Alchemy PCI host mode support.
|
|
*
|
|
* Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc. <source@mvista.com>
|
|
*
|
|
* Support for all devices (greater than 16) added by David Gathright.
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <asm/dma-coherence.h>
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
#include <asm/tlbmisc.h>
|
|
|
|
#ifdef CONFIG_PCI_DEBUG
|
|
#define DBG(x...) printk(KERN_DEBUG x)
|
|
#else
|
|
#define DBG(x...) do {} while (0)
|
|
#endif
|
|
|
|
#define PCI_ACCESS_READ 0
|
|
#define PCI_ACCESS_WRITE 1
|
|
|
|
struct alchemy_pci_context {
|
|
struct pci_controller alchemy_pci_ctrl; /* leave as first member! */
|
|
void __iomem *regs; /* ctrl base */
|
|
/* tools for wired entry for config space access */
|
|
unsigned long last_elo0;
|
|
unsigned long last_elo1;
|
|
int wired_entry;
|
|
struct vm_struct *pci_cfg_vm;
|
|
|
|
unsigned long pm[12];
|
|
|
|
int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
|
|
int (*board_pci_idsel)(unsigned int devsel, int assert);
|
|
};
|
|
|
|
/* for syscore_ops. There's only one PCI controller on Alchemy chips, so this
|
|
* should suffice for now.
|
|
*/
|
|
static struct alchemy_pci_context *__alchemy_pci_ctx;
|
|
|
|
|
|
/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
|
|
* in arch/mips/alchemy/common/setup.c
|
|
*/
|
|
static struct resource alchemy_pci_def_memres = {
|
|
.start = ALCHEMY_PCI_MEMWIN_START,
|
|
.end = ALCHEMY_PCI_MEMWIN_END,
|
|
.name = "PCI memory space",
|
|
.flags = IORESOURCE_MEM
|
|
};
|
|
|
|
static struct resource alchemy_pci_def_iores = {
|
|
.start = ALCHEMY_PCI_IOWIN_START,
|
|
.end = ALCHEMY_PCI_IOWIN_END,
|
|
.name = "PCI IO space",
|
|
.flags = IORESOURCE_IO
|
|
};
|
|
|
|
static void mod_wired_entry(int entry, unsigned long entrylo0,
|
|
unsigned long entrylo1, unsigned long entryhi,
|
|
unsigned long pagemask)
|
|
{
|
|
unsigned long old_pagemask;
|
|
unsigned long old_ctx;
|
|
|
|
/* Save old context and create impossible VPN2 value */
|
|
old_ctx = read_c0_entryhi() & 0xff;
|
|
old_pagemask = read_c0_pagemask();
|
|
write_c0_index(entry);
|
|
write_c0_pagemask(pagemask);
|
|
write_c0_entryhi(entryhi);
|
|
write_c0_entrylo0(entrylo0);
|
|
write_c0_entrylo1(entrylo1);
|
|
tlb_write_indexed();
|
|
write_c0_entryhi(old_ctx);
|
|
write_c0_pagemask(old_pagemask);
|
|
}
|
|
|
|
static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx)
|
|
{
|
|
ctx->wired_entry = read_c0_wired();
|
|
add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
|
|
ctx->last_elo0 = ctx->last_elo1 = ~0;
|
|
}
|
|
|
|
static int config_access(unsigned char access_type, struct pci_bus *bus,
|
|
unsigned int dev_fn, unsigned char where, u32 *data)
|
|
{
|
|
struct alchemy_pci_context *ctx = bus->sysdata;
|
|
unsigned int device = PCI_SLOT(dev_fn);
|
|
unsigned int function = PCI_FUNC(dev_fn);
|
|
unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r;
|
|
int error = PCIBIOS_SUCCESSFUL;
|
|
|
|
if (device > 19) {
|
|
*data = 0xffffffff;
|
|
return -1;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff;
|
|
r |= PCI_STATCMD_STATUS(0x2000);
|
|
__raw_writel(r, ctx->regs + PCI_REG_STATCMD);
|
|
wmb();
|
|
|
|
/* Allow board vendors to implement their own off-chip IDSEL.
|
|
* If it doesn't succeed, may as well bail out at this point.
|
|
*/
|
|
if (ctx->board_pci_idsel(device, 1) == 0) {
|
|
*data = 0xffffffff;
|
|
local_irq_restore(flags);
|
|
return -1;
|
|
}
|
|
|
|
/* Setup the config window */
|
|
if (bus->number == 0)
|
|
cfg_base = (1 << device) << 11;
|
|
else
|
|
cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
|
|
|
|
/* Setup the lower bits of the 36-bit address */
|
|
offset = (function << 8) | (where & ~0x3);
|
|
/* Pick up any address that falls below the page mask */
|
|
offset |= cfg_base & ~PAGE_MASK;
|
|
|
|
/* Page boundary */
|
|
cfg_base = cfg_base & PAGE_MASK;
|
|
|
|
/* To improve performance, if the current device is the same as
|
|
* the last device accessed, we don't touch the TLB.
|
|
*/
|
|
entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
|
|
entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
|
|
if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) {
|
|
mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1,
|
|
(unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
|
|
ctx->last_elo0 = entryLo0;
|
|
ctx->last_elo1 = entryLo1;
|
|
}
|
|
|
|
if (access_type == PCI_ACCESS_WRITE)
|
|
__raw_writel(*data, ctx->pci_cfg_vm->addr + offset);
|
|
else
|
|
*data = __raw_readl(ctx->pci_cfg_vm->addr + offset);
|
|
wmb();
|
|
|
|
DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n",
|
|
access_type, bus->number, device, where, *data, offset);
|
|
|
|
/* check for errors, master abort */
|
|
status = __raw_readl(ctx->regs + PCI_REG_STATCMD);
|
|
if (status & (1 << 29)) {
|
|
*data = 0xffffffff;
|
|
error = -1;
|
|
DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n",
|
|
access_type, bus->number, device);
|
|
} else if ((status >> 28) & 0xf) {
|
|
DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",
|
|
device, (status >> 28) & 0xf);
|
|
|
|
/* clear errors */
|
|
__raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD);
|
|
|
|
*data = 0xffffffff;
|
|
error = -1;
|
|
}
|
|
|
|
/* Take away the IDSEL. */
|
|
(void)ctx->board_pci_idsel(device, 0);
|
|
|
|
local_irq_restore(flags);
|
|
return error;
|
|
}
|
|
|
|
static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u8 *val)
|
|
{
|
|
u32 data;
|
|
int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
|
|
|
|
if (where & 1)
|
|
data >>= 8;
|
|
if (where & 2)
|
|
data >>= 16;
|
|
*val = data & 0xff;
|
|
return ret;
|
|
}
|
|
|
|
static int read_config_word(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u16 *val)
|
|
{
|
|
u32 data;
|
|
int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
|
|
|
|
if (where & 2)
|
|
data >>= 16;
|
|
*val = data & 0xffff;
|
|
return ret;
|
|
}
|
|
|
|
static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u32 *val)
|
|
{
|
|
return config_access(PCI_ACCESS_READ, bus, devfn, where, val);
|
|
}
|
|
|
|
static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u8 val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
data = (data & ~(0xff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
|
|
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int write_config_word(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u16 val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
data = (data & ~(0xffff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
|
|
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u32 val)
|
|
{
|
|
return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val);
|
|
}
|
|
|
|
static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
switch (size) {
|
|
case 1: {
|
|
u8 _val;
|
|
int rc = read_config_byte(bus, devfn, where, &_val);
|
|
|
|
*val = _val;
|
|
return rc;
|
|
}
|
|
case 2: {
|
|
u16 _val;
|
|
int rc = read_config_word(bus, devfn, where, &_val);
|
|
|
|
*val = _val;
|
|
return rc;
|
|
}
|
|
default:
|
|
return read_config_dword(bus, devfn, where, val);
|
|
}
|
|
}
|
|
|
|
static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
switch (size) {
|
|
case 1:
|
|
return write_config_byte(bus, devfn, where, (u8) val);
|
|
case 2:
|
|
return write_config_word(bus, devfn, where, (u16) val);
|
|
default:
|
|
return write_config_dword(bus, devfn, where, val);
|
|
}
|
|
}
|
|
|
|
static struct pci_ops alchemy_pci_ops = {
|
|
.read = alchemy_pci_read,
|
|
.write = alchemy_pci_write,
|
|
};
|
|
|
|
static int alchemy_pci_def_idsel(unsigned int devsel, int assert)
|
|
{
|
|
return 1; /* success */
|
|
}
|
|
|
|
/* save PCI controller register contents. */
|
|
static int alchemy_pci_suspend(void)
|
|
{
|
|
struct alchemy_pci_context *ctx = __alchemy_pci_ctx;
|
|
if (!ctx)
|
|
return 0;
|
|
|
|
ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM);
|
|
ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff;
|
|
ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH);
|
|
ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID);
|
|
ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID);
|
|
ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV);
|
|
ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL);
|
|
ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID);
|
|
ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV);
|
|
ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM);
|
|
ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR);
|
|
ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void alchemy_pci_resume(void)
|
|
{
|
|
struct alchemy_pci_context *ctx = __alchemy_pci_ctx;
|
|
if (!ctx)
|
|
return;
|
|
|
|
__raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM);
|
|
__raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH);
|
|
__raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID);
|
|
__raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID);
|
|
__raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV);
|
|
__raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL);
|
|
__raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID);
|
|
__raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV);
|
|
__raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM);
|
|
__raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR);
|
|
__raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT);
|
|
wmb();
|
|
__raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG);
|
|
wmb();
|
|
|
|
/* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired
|
|
* on resume, making it necessary to recreate it as soon as possible.
|
|
*/
|
|
ctx->wired_entry = 8191; /* impossibly high value */
|
|
alchemy_pci_wired_entry(ctx); /* install it */
|
|
}
|
|
|
|
static struct syscore_ops alchemy_pci_pmops = {
|
|
.suspend = alchemy_pci_suspend,
|
|
.resume = alchemy_pci_resume,
|
|
};
|
|
|
|
static int alchemy_pci_probe(struct platform_device *pdev)
|
|
{
|
|
struct alchemy_pci_platdata *pd = pdev->dev.platform_data;
|
|
struct alchemy_pci_context *ctx;
|
|
void __iomem *virt_io;
|
|
unsigned long val;
|
|
struct resource *r;
|
|
int ret;
|
|
|
|
/* need at least PCI IRQ mapping table */
|
|
if (!pd) {
|
|
dev_err(&pdev->dev, "need platform data for PCI setup\n");
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx) {
|
|
dev_err(&pdev->dev, "no memory for pcictl context\n");
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!r) {
|
|
dev_err(&pdev->dev, "no pcictl ctrl regs resource\n");
|
|
ret = -ENODEV;
|
|
goto out1;
|
|
}
|
|
|
|
if (!request_mem_region(r->start, resource_size(r), pdev->name)) {
|
|
dev_err(&pdev->dev, "cannot claim pci regs\n");
|
|
ret = -ENODEV;
|
|
goto out1;
|
|
}
|
|
|
|
ctx->regs = ioremap_nocache(r->start, resource_size(r));
|
|
if (!ctx->regs) {
|
|
dev_err(&pdev->dev, "cannot map pci regs\n");
|
|
ret = -ENODEV;
|
|
goto out2;
|
|
}
|
|
|
|
/* map parts of the PCI IO area */
|
|
/* REVISIT: if this changes with a newer variant (doubt it) make this
|
|
* a platform resource.
|
|
*/
|
|
virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000);
|
|
if (!virt_io) {
|
|
dev_err(&pdev->dev, "cannot remap pci io space\n");
|
|
ret = -ENODEV;
|
|
goto out3;
|
|
}
|
|
ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io;
|
|
|
|
/* Au1500 revisions older than AD have borked coherent PCI */
|
|
if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
|
|
(read_c0_prid() < 0x01030202) && !coherentio) {
|
|
val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
|
|
val |= PCI_CONFIG_NC;
|
|
__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
|
|
wmb();
|
|
dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n");
|
|
}
|
|
|
|
if (pd->board_map_irq)
|
|
ctx->board_map_irq = pd->board_map_irq;
|
|
|
|
if (pd->board_pci_idsel)
|
|
ctx->board_pci_idsel = pd->board_pci_idsel;
|
|
else
|
|
ctx->board_pci_idsel = alchemy_pci_def_idsel;
|
|
|
|
/* fill in relevant pci_controller members */
|
|
ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops;
|
|
ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres;
|
|
ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores;
|
|
|
|
/* we can't ioremap the entire pci config space because it's too large,
|
|
* nor can we dynamically ioremap it because some drivers use the
|
|
* PCI config routines from within atomic contex and that becomes a
|
|
* problem in get_vm_area(). Instead we use one wired TLB entry to
|
|
* handle all config accesses for all busses.
|
|
*/
|
|
ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
|
|
if (!ctx->pci_cfg_vm) {
|
|
dev_err(&pdev->dev, "unable to get vm area\n");
|
|
ret = -ENOMEM;
|
|
goto out4;
|
|
}
|
|
ctx->wired_entry = 8191; /* impossibly high value */
|
|
alchemy_pci_wired_entry(ctx); /* install it */
|
|
|
|
set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base);
|
|
|
|
/* board may want to modify bits in the config register, do it now */
|
|
val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
|
|
val &= ~pd->pci_cfg_clr;
|
|
val |= pd->pci_cfg_set;
|
|
val &= ~PCI_CONFIG_PD; /* clear disable bit */
|
|
__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
|
|
wmb();
|
|
|
|
__alchemy_pci_ctx = ctx;
|
|
platform_set_drvdata(pdev, ctx);
|
|
register_syscore_ops(&alchemy_pci_pmops);
|
|
register_pci_controller(&ctx->alchemy_pci_ctrl);
|
|
|
|
return 0;
|
|
|
|
out4:
|
|
iounmap(virt_io);
|
|
out3:
|
|
iounmap(ctx->regs);
|
|
out2:
|
|
release_mem_region(r->start, resource_size(r));
|
|
out1:
|
|
kfree(ctx);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver alchemy_pcictl_driver = {
|
|
.probe = alchemy_pci_probe,
|
|
.driver = {
|
|
.name = "alchemy-pci",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init alchemy_pci_init(void)
|
|
{
|
|
/* Au1500/Au1550 have PCI */
|
|
switch (alchemy_get_cputype()) {
|
|
case ALCHEMY_CPU_AU1500:
|
|
case ALCHEMY_CPU_AU1550:
|
|
return platform_driver_register(&alchemy_pcictl_driver);
|
|
}
|
|
return 0;
|
|
}
|
|
arch_initcall(alchemy_pci_init);
|
|
|
|
|
|
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
struct alchemy_pci_context *ctx = dev->sysdata;
|
|
if (ctx && ctx->board_map_irq)
|
|
return ctx->board_map_irq(dev, slot, pin);
|
|
return -1;
|
|
}
|
|
|
|
int pcibios_plat_dev_init(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|