mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 04:54:41 +08:00
ad00e080eb
Fix the following warnings from dtc by adding the unit name to memory
nodes:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Converted using the following command:
perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"`
The files below were manually fixed:
-imx1-ads.dts
-imx1-apf9328.dts
-imx6q-pistachio.dts
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
568 lines
13 KiB
Plaintext
568 lines
13 KiB
Plaintext
/*
|
|
* Copyright 2016 Gateworks Corporation
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this file; if not, write to the Free
|
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
/* these are used by bootloader for disabling nodes */
|
|
aliases {
|
|
led0 = &led0;
|
|
led1 = &led1;
|
|
nand = &gpmi;
|
|
usb0 = &usbh1;
|
|
usb1 = &usbotg;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
|
|
|
led0: user1 {
|
|
label = "user1";
|
|
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
|
|
default-state = "on";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
led1: user2 {
|
|
label = "user2";
|
|
gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
memory@10000000 {
|
|
reg = <0x10000000 0x20000000>;
|
|
};
|
|
|
|
pps {
|
|
compatible = "pps-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pps>;
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
reg_5p0v: regulator-5p0v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5P0V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
&gpmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hdmi>;
|
|
ddc-i2c-bus = <&i2c3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
gpio: pca9555@23 {
|
|
compatible = "nxp,pca9555";
|
|
reg = <0x23>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
eeprom1: eeprom@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
eeprom2: eeprom@51 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x51>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
eeprom3: eeprom@52 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x52>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
eeprom4: eeprom@53 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x53>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
rtc: ds1672@68 {
|
|
compatible = "dallas,ds1672";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
ltc3676: pmic@3c {
|
|
compatible = "lltc,ltc3676";
|
|
reg = <0x3c>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
regulators {
|
|
/* VDD_SOC (1+R1/R2 = 1.635) */
|
|
reg_vdd_soc: sw1 {
|
|
regulator-name = "vddsoc";
|
|
regulator-min-microvolt = <674400>;
|
|
regulator-max-microvolt = <1308000>;
|
|
lltc,fb-voltage-divider = <127000 200000>;
|
|
regulator-ramp-delay = <7000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* VDD_DDR (1+R1/R2 = 2.105) */
|
|
reg_vdd_ddr: sw2 {
|
|
regulator-name = "vddddr";
|
|
regulator-min-microvolt = <868310>;
|
|
regulator-max-microvolt = <1684000>;
|
|
lltc,fb-voltage-divider = <221000 200000>;
|
|
regulator-ramp-delay = <7000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* VDD_ARM (1+R1/R2 = 1.635) */
|
|
reg_vdd_arm: sw3 {
|
|
regulator-name = "vddarm";
|
|
regulator-min-microvolt = <674400>;
|
|
regulator-max-microvolt = <1308000>;
|
|
lltc,fb-voltage-divider = <127000 200000>;
|
|
regulator-ramp-delay = <7000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* VDD_3P3 (1+R1/R2 = 1.281) */
|
|
reg_3p3v: sw4 {
|
|
regulator-name = "vdd3p3";
|
|
regulator-min-microvolt = <1880000>;
|
|
regulator-max-microvolt = <3647000>;
|
|
lltc,fb-voltage-divider = <200000 56200>;
|
|
regulator-ramp-delay = <7000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
|
|
reg_1p8a: ldo2 {
|
|
regulator-name = "vdd1p8a";
|
|
regulator-min-microvolt = <1816125>;
|
|
regulator-max-microvolt = <1816125>;
|
|
lltc,fb-voltage-divider = <301000 200000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* VDD_1P8b: microSD VDD_1P8 */
|
|
reg_1p8b: ldo3 {
|
|
regulator-name = "vdd1p8b";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
|
reg_3p0v: ldo4 {
|
|
regulator-name = "vdd3p0";
|
|
regulator-min-microvolt = <3023250>;
|
|
regulator-max-microvolt = <3023250>;
|
|
lltc,fb-voltage-divider = <634000 200000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
adv7180: camera@20 {
|
|
compatible = "adi,adv7180";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_adv7180>;
|
|
reg = <0x20>;
|
|
powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
port {
|
|
adv7180_to_ipu1_csi0_mux: endpoint {
|
|
remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
|
|
bus-width = <8>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ipu1_csi0_from_ipu1_csi0_mux {
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&ipu1_csi0_mux_from_parallel_sensor {
|
|
remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&ipu1_csi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu1_csi0>;
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
|
|
status = "disabled";
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
|
|
status = "disabled";
|
|
};
|
|
|
|
&pwm4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_adv7180: adv7180grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x0001b0b0
|
|
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpmi_nand: gpminandgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_hdmi: hdmigrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_ipu1_csi0: ipu1csi0grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
|
|
MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
|
|
MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
|
|
MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
|
|
MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
|
|
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie: pciegrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
|
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
|
>;
|
|
};
|
|
|
|
pinctrl_pps: ppsgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm2: pwm2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm3: pwm3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm4: pwm4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4: uart4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
|
|
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
|
|
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
|
|
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
|
>;
|
|
};
|
|
};
|