mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 16:24:13 +08:00
c704b4ef1a
Now the devices show up under hid no matter the connection (for USB and Bluetooth, not serial nor i2c). The USB devices can now be easily found under /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n> The Bluetooth devices could also be found under this path since their inclusion (April 2010), so this patch fixes the non-precise "hidraw*" path for them. The ABI has been unified while setting the LEDs and OLEDs. So Bluetooth devices lost their own LED selector but use the USB sysfs attribute. For OLEDs, Bluetooth devices handle only 1-bit images instead of 4 for USB. The documentation has been updated to match this. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
80 lines
3.3 KiB
Plaintext
80 lines
3.3 KiB
Plaintext
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed
|
|
Date: April 2010
|
|
Kernel Version: 2.6.35
|
|
Contact: linux-bluetooth@vger.kernel.org
|
|
Description:
|
|
The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file
|
|
controls reporting speed of Wacom bluetooth tablet. Reading
|
|
from this file returns 1 if tablet reports in high speed mode
|
|
or 0 otherwise. Writing to this file one of these values
|
|
switches reporting speed.
|
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led
|
|
Date: August 2014
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Attribute group for control of the status LEDs and the OLEDs.
|
|
This attribute group is only available for Intuos 4 M, L,
|
|
and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only),
|
|
Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD
|
|
(LEDs only). Therefore its presence implicitly signifies the
|
|
presence of said LEDs and OLEDs on the tablet device.
|
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status0_luminance
|
|
Date: August 2014
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets the status LED luminance (1..127)
|
|
when the stylus does not touch the tablet surface, and no
|
|
button is pressed on the stylus. This luminance level is
|
|
normally lower than the level when a button is pressed.
|
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status1_luminance
|
|
Date: August 2014
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets the status LED luminance (1..127)
|
|
when the stylus touches the tablet surface, or any button is
|
|
pressed on the stylus.
|
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led0_select
|
|
Date: August 2014
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets which one of the four (for Intuos 4
|
|
and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq
|
|
24HD) status LEDs is active (0..3). The other three LEDs on the
|
|
same side are always inactive.
|
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led1_select
|
|
Date: August 2014
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets which one of the left four (for Cintiq 21UX2
|
|
and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
|
|
the left are always inactive.
|
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/buttons_luminance
|
|
Date: August 2014
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets the overall luminance level (0..15)
|
|
of all eight button OLED displays.
|
|
|
|
What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/button<n>_rawimg
|
|
Date: August 2014
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
When writing a 1024 byte raw image in Wacom Intuos 4
|
|
interleaving format to the file, the image shows up on Button N
|
|
of the device. The image is a 64x32 pixel 4-bit gray image. The
|
|
1024 byte binary is split up into 16x 64 byte chunks. Each 64
|
|
byte chunk encodes the image data for two consecutive lines on
|
|
the display. The low nibble of each byte contains the first
|
|
line, and the high nibble contains the second line.
|
|
When the Wacom Intuos 4 is connected over Bluetooth, the
|
|
image has to contain 256 bytes (64x32 px 1 bit colour).
|
|
The format is also scrambled, like in the USB mode, and it can
|
|
be summarized by converting 76543210 into GECA6420.
|
|
HGFEDCBA HFDB7531
|