linux/drivers/iio
Greg Kroah-Hartman b2e312061c First round of IIO fixes for the 4.14 cycle
Note this includes fixes from recent merge window.  As such the tree
 is based on top of a prior staging/staging-next tree.
 
 * iio core
   - return and error for a failed read_reg debugfs call rather than
     eating the error.
 * ad7192
   - Use the dedicated reset function in the ad_sigma_delta library
     instead of an spi transfer with the data on the stack which
     could cause problems with DMA.
 * ad7793
   - Implement a dedicate reset function in the ad_sigma_delta library
     and use it to correctly reset this part.
 * bme280
   - ctrl_reg write must occur after any register writes
   for updates to take effect.
 * mcp320x
   - negative voltage readout was broken.
   - Fix an oops on module unload due to spi_set_drvdata not being called
     in probe.
 * st_magn
   - Fix the data ready line configuration for the lis3mdl. It is not
     configurable so the st_magn core was assuming it didn't exist
     and so wasn't consuming interrupts resulting in an unhandled
     interrupt.
 * stm32-adc
   - off by one error on max channels checking.
 * stm32-timer
   - preset should not be buffered - reorganising register writes avoids
   this.
   - fix a corner case in which write preset goes wrong when a timer is
   used first as a trigger then as a counter with preset. Odd case but
   you never know.
 * ti-ads1015
   - Fix setting of comparator polarity by fixing bitfield definition.
 * twl4030
   - Error path handling fix to cleanup in event of regulator
     registration failure.
   - Disable the vusb3v1 regulator correctly in error handling
   - Don't paper over a regulator enable failure.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlnH2PkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoiNFw//XKT/CRq7R8Dg5vy4FT7NRw/SpSVH9u8M
 JsIISyAoh0jfOFJFkVv2Ll+Zs+SkbXJOPMUreaFJMnftSCkBdteT9D5kz5cYiUkO
 sFn58YEEqKCqQVJBEi0yM00HMxbpNKiNHXzo9WC8ZiUVRJqSigq1coznSqaZngRd
 yf4a9Z33jiH/NXalqy5Vb4CSn76UWpvvYJ11tuNxXqOldkyU4sm8bvsPWnBg1qG3
 YIuVZs83Rv1HW0t6ktYf3WwC2rBhKEM8st2fUCLkU+4+foDuqQBiFdWJzTcxe6Ru
 8za+q3ngOo7rRkLS8cSTsh8hbfKwIV0e3rQvsN3zqodqjPilw9uH3eybMYzLK/0I
 j9o12jaD1Ow7zQfiQnNnyJqDLddEt+f6GcrI/iYQPlTIQIhqDii4YInDyCrF4xbr
 i/8saOr5n4PsdHRovTUl2rrgiX+Jix6OmNLEtUdp1HWrc0XwbZ5L/1g6pXFL98QZ
 Kq8MwjNu+6x+66Hga/1fll19hZ/VMYGqxFtoP+6S28TS1bO9dXm6XNl5/U5Nh5mN
 J255UFCdFkBmJO9nP7tmbDscMCAbhc6AOHKxjUebuoNnyhyV+20W9S/gpzTIilnO
 Gv9D0z29zITc8Hpfhl2YKC6F00BuRAdPFJo05rSE/KoWX3bkPCiXFTfQ+aPwB72h
 bYT4oJeUoQg=
 =CcjQ
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of IIO fixes for the 4.14 cycle

Note this includes fixes from recent merge window.  As such the tree
is based on top of a prior staging/staging-next tree.

* iio core
  - return and error for a failed read_reg debugfs call rather than
    eating the error.
* ad7192
  - Use the dedicated reset function in the ad_sigma_delta library
    instead of an spi transfer with the data on the stack which
    could cause problems with DMA.
* ad7793
  - Implement a dedicate reset function in the ad_sigma_delta library
    and use it to correctly reset this part.
* bme280
  - ctrl_reg write must occur after any register writes
  for updates to take effect.
* mcp320x
  - negative voltage readout was broken.
  - Fix an oops on module unload due to spi_set_drvdata not being called
    in probe.
* st_magn
  - Fix the data ready line configuration for the lis3mdl. It is not
    configurable so the st_magn core was assuming it didn't exist
    and so wasn't consuming interrupts resulting in an unhandled
    interrupt.
* stm32-adc
  - off by one error on max channels checking.
* stm32-timer
  - preset should not be buffered - reorganising register writes avoids
  this.
  - fix a corner case in which write preset goes wrong when a timer is
  used first as a trigger then as a counter with preset. Odd case but
  you never know.
* ti-ads1015
  - Fix setting of comparator polarity by fixing bitfield definition.
* twl4030
  - Error path handling fix to cleanup in event of regulator
    registration failure.
  - Disable the vusb3v1 regulator correctly in error handling
  - Don't paper over a regulator enable failure.
2017-09-25 10:58:22 +02:00
..
accel Second set of IIO new device support, features and cleanup for the 4.14 cycle. 2017-08-20 10:42:42 -07:00
adc First round of IIO fixes for the 4.14 cycle 2017-09-25 10:58:22 +02:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio: buffer-dmaengine: Add missing header buffer_impl.h 2017-06-13 20:56:05 +01:00
chemical iio: chemical: ccs811: Add triggered buffer support 2017-08-18 08:08:02 +01:00
common First round of IIO fixes for the 4.14 cycle 2017-09-25 10:58:22 +02:00
counter iio: counter: Add support for STM32 LPTimer 2017-09-04 14:49:30 +01:00
dac iio: dac: stm32-dac-core: explicitly request exclusive reset control 2017-08-20 15:41:18 +01:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi 2017-07-02 10:24:56 +01:00
health First set of IIO new device support, features and cleanup for the 4.12 cycle. 2017-03-06 13:17:21 +01:00
humidity iio: humidity: hts221: move drdy enable logic in hts221_trig_set_state() 2017-07-25 20:03:04 +01:00
imu Merge 4.13-rc7 into staging-next 2017-08-28 15:26:48 +02:00
light Second set of IIO new device support, features and cleanup for the 4.14 cycle. 2017-08-20 10:42:42 -07:00
magnetometer First round of IIO fixes for the 4.14 cycle 2017-09-25 10:58:22 +02:00
multiplexer iio: multiplexer: new iio category and iio-mux driver 2017-06-03 19:29:26 +09:00
orientation iio: orientation: hid-sensor-rotation: Drop unnecessary static 2017-07-17 21:45:01 +01:00
potentiometer iio: max5481: Add support for Maxim digital potentiometers 2017-01-28 12:13:31 +00:00
potentiostat iio: lmp91000: Set parent device 2017-02-19 12:01:52 +00:00
pressure First round of IIO fixes for the 4.14 cycle 2017-09-25 10:58:22 +02:00
proximity iio: srf08: add support for srf02 in i2c mode 2017-08-18 08:04:17 +01:00
temperature iio: temperature: tsys01: Add OF match table 2017-07-01 10:16:42 +01:00
trigger First round of IIO fixes for the 4.14 cycle 2017-09-25 10:58:22 +02:00
iio_core_trigger.h
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-buffer.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio: core: Return error for failed read_reg 2017-09-24 16:58:32 +01:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: fix NULL pointer dereference in iio_trigger_write_current() 2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c First round of IIO new device support, features and cleanups for the 4.14 cycle. 2017-07-27 21:29:49 -07:00
Kconfig iio: multiplexer: new iio category and iio-mux driver 2017-06-03 19:29:26 +09:00
Makefile iio: multiplexer: new iio category and iio-mux driver 2017-06-03 19:29:26 +09:00