mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 05:04:09 +08:00
07b552732e
The dma of a100 is similar to h6, with some minor changes to support greater addressing capabilities. Add support for it. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Link: https://lore.kernel.org/r/719852c6a9a597bd2e82d01a268ca02b9dee826c.1604988979.git.frank@allwinnertech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
1480 lines
40 KiB
C
1480 lines
40 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2013-2014 Allwinner Tech Co., Ltd
|
|
* Author: Sugar <shuge@allwinnertech.com>
|
|
*
|
|
* Copyright (C) 2014 Maxime Ripard
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "virt-dma.h"
|
|
|
|
/*
|
|
* Common registers
|
|
*/
|
|
#define DMA_IRQ_EN(x) ((x) * 0x04)
|
|
#define DMA_IRQ_HALF BIT(0)
|
|
#define DMA_IRQ_PKG BIT(1)
|
|
#define DMA_IRQ_QUEUE BIT(2)
|
|
|
|
#define DMA_IRQ_CHAN_NR 8
|
|
#define DMA_IRQ_CHAN_WIDTH 4
|
|
|
|
|
|
#define DMA_IRQ_STAT(x) ((x) * 0x04 + 0x10)
|
|
|
|
#define DMA_STAT 0x30
|
|
|
|
/* Offset between DMA_IRQ_EN and DMA_IRQ_STAT limits number of channels */
|
|
#define DMA_MAX_CHANNELS (DMA_IRQ_CHAN_NR * 0x10 / 4)
|
|
|
|
/*
|
|
* sun8i specific registers
|
|
*/
|
|
#define SUN8I_DMA_GATE 0x20
|
|
#define SUN8I_DMA_GATE_ENABLE 0x4
|
|
|
|
#define SUNXI_H3_SECURE_REG 0x20
|
|
#define SUNXI_H3_DMA_GATE 0x28
|
|
#define SUNXI_H3_DMA_GATE_ENABLE 0x4
|
|
/*
|
|
* Channels specific registers
|
|
*/
|
|
#define DMA_CHAN_ENABLE 0x00
|
|
#define DMA_CHAN_ENABLE_START BIT(0)
|
|
#define DMA_CHAN_ENABLE_STOP 0
|
|
|
|
#define DMA_CHAN_PAUSE 0x04
|
|
#define DMA_CHAN_PAUSE_PAUSE BIT(1)
|
|
#define DMA_CHAN_PAUSE_RESUME 0
|
|
|
|
#define DMA_CHAN_LLI_ADDR 0x08
|
|
|
|
#define DMA_CHAN_CUR_CFG 0x0c
|
|
#define DMA_CHAN_MAX_DRQ_A31 0x1f
|
|
#define DMA_CHAN_MAX_DRQ_H6 0x3f
|
|
#define DMA_CHAN_CFG_SRC_DRQ_A31(x) ((x) & DMA_CHAN_MAX_DRQ_A31)
|
|
#define DMA_CHAN_CFG_SRC_DRQ_H6(x) ((x) & DMA_CHAN_MAX_DRQ_H6)
|
|
#define DMA_CHAN_CFG_SRC_MODE_A31(x) (((x) & 0x1) << 5)
|
|
#define DMA_CHAN_CFG_SRC_MODE_H6(x) (((x) & 0x1) << 8)
|
|
#define DMA_CHAN_CFG_SRC_BURST_A31(x) (((x) & 0x3) << 7)
|
|
#define DMA_CHAN_CFG_SRC_BURST_H3(x) (((x) & 0x3) << 6)
|
|
#define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9)
|
|
|
|
#define DMA_CHAN_CFG_DST_DRQ_A31(x) (DMA_CHAN_CFG_SRC_DRQ_A31(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_DRQ_H6(x) (DMA_CHAN_CFG_SRC_DRQ_H6(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_MODE_A31(x) (DMA_CHAN_CFG_SRC_MODE_A31(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_MODE_H6(x) (DMA_CHAN_CFG_SRC_MODE_H6(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_BURST_A31(x) (DMA_CHAN_CFG_SRC_BURST_A31(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_BURST_H3(x) (DMA_CHAN_CFG_SRC_BURST_H3(x) << 16)
|
|
#define DMA_CHAN_CFG_DST_WIDTH(x) (DMA_CHAN_CFG_SRC_WIDTH(x) << 16)
|
|
|
|
#define DMA_CHAN_CUR_SRC 0x10
|
|
|
|
#define DMA_CHAN_CUR_DST 0x14
|
|
|
|
#define DMA_CHAN_CUR_CNT 0x18
|
|
|
|
#define DMA_CHAN_CUR_PARA 0x1c
|
|
|
|
|
|
/*
|
|
* Various hardware related defines
|
|
*/
|
|
#define LLI_LAST_ITEM 0xfffff800
|
|
#define NORMAL_WAIT 8
|
|
#define DRQ_SDRAM 1
|
|
#define LINEAR_MODE 0
|
|
#define IO_MODE 1
|
|
|
|
/* forward declaration */
|
|
struct sun6i_dma_dev;
|
|
|
|
/*
|
|
* Hardware channels / ports representation
|
|
*
|
|
* The hardware is used in several SoCs, with differing numbers
|
|
* of channels and endpoints. This structure ties those numbers
|
|
* to a certain compatible string.
|
|
*/
|
|
struct sun6i_dma_config {
|
|
u32 nr_max_channels;
|
|
u32 nr_max_requests;
|
|
u32 nr_max_vchans;
|
|
/*
|
|
* In the datasheets/user manuals of newer Allwinner SoCs, a special
|
|
* bit (bit 2 at register 0x20) is present.
|
|
* It's named "DMA MCLK interface circuit auto gating bit" in the
|
|
* documents, and the footnote of this register says that this bit
|
|
* should be set up when initializing the DMA controller.
|
|
* Allwinner A23/A33 user manuals do not have this bit documented,
|
|
* however these SoCs really have and need this bit, as seen in the
|
|
* BSP kernel source code.
|
|
*/
|
|
void (*clock_autogate_enable)(struct sun6i_dma_dev *);
|
|
void (*set_burst_length)(u32 *p_cfg, s8 src_burst, s8 dst_burst);
|
|
void (*set_drq)(u32 *p_cfg, s8 src_drq, s8 dst_drq);
|
|
void (*set_mode)(u32 *p_cfg, s8 src_mode, s8 dst_mode);
|
|
u32 src_burst_lengths;
|
|
u32 dst_burst_lengths;
|
|
u32 src_addr_widths;
|
|
u32 dst_addr_widths;
|
|
bool has_mbus_clk;
|
|
};
|
|
|
|
/*
|
|
* Hardware representation of the LLI
|
|
*
|
|
* The hardware will be fed the physical address of this structure,
|
|
* and read its content in order to start the transfer.
|
|
*/
|
|
struct sun6i_dma_lli {
|
|
u32 cfg;
|
|
u32 src;
|
|
u32 dst;
|
|
u32 len;
|
|
u32 para;
|
|
u32 p_lli_next;
|
|
|
|
/*
|
|
* This field is not used by the DMA controller, but will be
|
|
* used by the CPU to go through the list (mostly for dumping
|
|
* or freeing it).
|
|
*/
|
|
struct sun6i_dma_lli *v_lli_next;
|
|
};
|
|
|
|
|
|
struct sun6i_desc {
|
|
struct virt_dma_desc vd;
|
|
dma_addr_t p_lli;
|
|
struct sun6i_dma_lli *v_lli;
|
|
};
|
|
|
|
struct sun6i_pchan {
|
|
u32 idx;
|
|
void __iomem *base;
|
|
struct sun6i_vchan *vchan;
|
|
struct sun6i_desc *desc;
|
|
struct sun6i_desc *done;
|
|
};
|
|
|
|
struct sun6i_vchan {
|
|
struct virt_dma_chan vc;
|
|
struct list_head node;
|
|
struct dma_slave_config cfg;
|
|
struct sun6i_pchan *phy;
|
|
u8 port;
|
|
u8 irq_type;
|
|
bool cyclic;
|
|
};
|
|
|
|
struct sun6i_dma_dev {
|
|
struct dma_device slave;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct clk *clk_mbus;
|
|
int irq;
|
|
spinlock_t lock;
|
|
struct reset_control *rstc;
|
|
struct tasklet_struct task;
|
|
atomic_t tasklet_shutdown;
|
|
struct list_head pending;
|
|
struct dma_pool *pool;
|
|
struct sun6i_pchan *pchans;
|
|
struct sun6i_vchan *vchans;
|
|
const struct sun6i_dma_config *cfg;
|
|
u32 num_pchans;
|
|
u32 num_vchans;
|
|
u32 max_request;
|
|
};
|
|
|
|
static struct device *chan2dev(struct dma_chan *chan)
|
|
{
|
|
return &chan->dev->device;
|
|
}
|
|
|
|
static inline struct sun6i_dma_dev *to_sun6i_dma_dev(struct dma_device *d)
|
|
{
|
|
return container_of(d, struct sun6i_dma_dev, slave);
|
|
}
|
|
|
|
static inline struct sun6i_vchan *to_sun6i_vchan(struct dma_chan *chan)
|
|
{
|
|
return container_of(chan, struct sun6i_vchan, vc.chan);
|
|
}
|
|
|
|
static inline struct sun6i_desc *
|
|
to_sun6i_desc(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
return container_of(tx, struct sun6i_desc, vd.tx);
|
|
}
|
|
|
|
static inline void sun6i_dma_dump_com_regs(struct sun6i_dma_dev *sdev)
|
|
{
|
|
dev_dbg(sdev->slave.dev, "Common register:\n"
|
|
"\tmask0(%04x): 0x%08x\n"
|
|
"\tmask1(%04x): 0x%08x\n"
|
|
"\tpend0(%04x): 0x%08x\n"
|
|
"\tpend1(%04x): 0x%08x\n"
|
|
"\tstats(%04x): 0x%08x\n",
|
|
DMA_IRQ_EN(0), readl(sdev->base + DMA_IRQ_EN(0)),
|
|
DMA_IRQ_EN(1), readl(sdev->base + DMA_IRQ_EN(1)),
|
|
DMA_IRQ_STAT(0), readl(sdev->base + DMA_IRQ_STAT(0)),
|
|
DMA_IRQ_STAT(1), readl(sdev->base + DMA_IRQ_STAT(1)),
|
|
DMA_STAT, readl(sdev->base + DMA_STAT));
|
|
}
|
|
|
|
static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev,
|
|
struct sun6i_pchan *pchan)
|
|
{
|
|
phys_addr_t reg = virt_to_phys(pchan->base);
|
|
|
|
dev_dbg(sdev->slave.dev, "Chan %d reg: %pa\n"
|
|
"\t___en(%04x): \t0x%08x\n"
|
|
"\tpause(%04x): \t0x%08x\n"
|
|
"\tstart(%04x): \t0x%08x\n"
|
|
"\t__cfg(%04x): \t0x%08x\n"
|
|
"\t__src(%04x): \t0x%08x\n"
|
|
"\t__dst(%04x): \t0x%08x\n"
|
|
"\tcount(%04x): \t0x%08x\n"
|
|
"\t_para(%04x): \t0x%08x\n\n",
|
|
pchan->idx, ®,
|
|
DMA_CHAN_ENABLE,
|
|
readl(pchan->base + DMA_CHAN_ENABLE),
|
|
DMA_CHAN_PAUSE,
|
|
readl(pchan->base + DMA_CHAN_PAUSE),
|
|
DMA_CHAN_LLI_ADDR,
|
|
readl(pchan->base + DMA_CHAN_LLI_ADDR),
|
|
DMA_CHAN_CUR_CFG,
|
|
readl(pchan->base + DMA_CHAN_CUR_CFG),
|
|
DMA_CHAN_CUR_SRC,
|
|
readl(pchan->base + DMA_CHAN_CUR_SRC),
|
|
DMA_CHAN_CUR_DST,
|
|
readl(pchan->base + DMA_CHAN_CUR_DST),
|
|
DMA_CHAN_CUR_CNT,
|
|
readl(pchan->base + DMA_CHAN_CUR_CNT),
|
|
DMA_CHAN_CUR_PARA,
|
|
readl(pchan->base + DMA_CHAN_CUR_PARA));
|
|
}
|
|
|
|
static inline s8 convert_burst(u32 maxburst)
|
|
{
|
|
switch (maxburst) {
|
|
case 1:
|
|
return 0;
|
|
case 4:
|
|
return 1;
|
|
case 8:
|
|
return 2;
|
|
case 16:
|
|
return 3;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
|
|
{
|
|
return ilog2(addr_width);
|
|
}
|
|
|
|
static void sun6i_enable_clock_autogate_a23(struct sun6i_dma_dev *sdev)
|
|
{
|
|
writel(SUN8I_DMA_GATE_ENABLE, sdev->base + SUN8I_DMA_GATE);
|
|
}
|
|
|
|
static void sun6i_enable_clock_autogate_h3(struct sun6i_dma_dev *sdev)
|
|
{
|
|
writel(SUNXI_H3_DMA_GATE_ENABLE, sdev->base + SUNXI_H3_DMA_GATE);
|
|
}
|
|
|
|
static void sun6i_set_burst_length_a31(u32 *p_cfg, s8 src_burst, s8 dst_burst)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_BURST_A31(src_burst) |
|
|
DMA_CHAN_CFG_DST_BURST_A31(dst_burst);
|
|
}
|
|
|
|
static void sun6i_set_burst_length_h3(u32 *p_cfg, s8 src_burst, s8 dst_burst)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_BURST_H3(src_burst) |
|
|
DMA_CHAN_CFG_DST_BURST_H3(dst_burst);
|
|
}
|
|
|
|
static void sun6i_set_drq_a31(u32 *p_cfg, s8 src_drq, s8 dst_drq)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_DRQ_A31(src_drq) |
|
|
DMA_CHAN_CFG_DST_DRQ_A31(dst_drq);
|
|
}
|
|
|
|
static void sun6i_set_drq_h6(u32 *p_cfg, s8 src_drq, s8 dst_drq)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_DRQ_H6(src_drq) |
|
|
DMA_CHAN_CFG_DST_DRQ_H6(dst_drq);
|
|
}
|
|
|
|
static void sun6i_set_mode_a31(u32 *p_cfg, s8 src_mode, s8 dst_mode)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_MODE_A31(src_mode) |
|
|
DMA_CHAN_CFG_DST_MODE_A31(dst_mode);
|
|
}
|
|
|
|
static void sun6i_set_mode_h6(u32 *p_cfg, s8 src_mode, s8 dst_mode)
|
|
{
|
|
*p_cfg |= DMA_CHAN_CFG_SRC_MODE_H6(src_mode) |
|
|
DMA_CHAN_CFG_DST_MODE_H6(dst_mode);
|
|
}
|
|
|
|
static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
|
|
{
|
|
struct sun6i_desc *txd = pchan->desc;
|
|
struct sun6i_dma_lli *lli;
|
|
size_t bytes;
|
|
dma_addr_t pos;
|
|
|
|
pos = readl(pchan->base + DMA_CHAN_LLI_ADDR);
|
|
bytes = readl(pchan->base + DMA_CHAN_CUR_CNT);
|
|
|
|
if (pos == LLI_LAST_ITEM)
|
|
return bytes;
|
|
|
|
for (lli = txd->v_lli; lli; lli = lli->v_lli_next) {
|
|
if (lli->p_lli_next == pos) {
|
|
for (lli = lli->v_lli_next; lli; lli = lli->v_lli_next)
|
|
bytes += lli->len;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return bytes;
|
|
}
|
|
|
|
static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
|
|
struct sun6i_dma_lli *next,
|
|
dma_addr_t next_phy,
|
|
struct sun6i_desc *txd)
|
|
{
|
|
if ((!prev && !txd) || !next)
|
|
return NULL;
|
|
|
|
if (!prev) {
|
|
txd->p_lli = next_phy;
|
|
txd->v_lli = next;
|
|
} else {
|
|
prev->p_lli_next = next_phy;
|
|
prev->v_lli_next = next;
|
|
}
|
|
|
|
next->p_lli_next = LLI_LAST_ITEM;
|
|
next->v_lli_next = NULL;
|
|
|
|
return next;
|
|
}
|
|
|
|
static inline void sun6i_dma_dump_lli(struct sun6i_vchan *vchan,
|
|
struct sun6i_dma_lli *lli)
|
|
{
|
|
phys_addr_t p_lli = virt_to_phys(lli);
|
|
|
|
dev_dbg(chan2dev(&vchan->vc.chan),
|
|
"\n\tdesc: p - %pa v - 0x%p\n"
|
|
"\t\tc - 0x%08x s - 0x%08x d - 0x%08x\n"
|
|
"\t\tl - 0x%08x p - 0x%08x n - 0x%08x\n",
|
|
&p_lli, lli,
|
|
lli->cfg, lli->src, lli->dst,
|
|
lli->len, lli->para, lli->p_lli_next);
|
|
}
|
|
|
|
static void sun6i_dma_free_desc(struct virt_dma_desc *vd)
|
|
{
|
|
struct sun6i_desc *txd = to_sun6i_desc(&vd->tx);
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vd->tx.chan->device);
|
|
struct sun6i_dma_lli *v_lli, *v_next;
|
|
dma_addr_t p_lli, p_next;
|
|
|
|
if (unlikely(!txd))
|
|
return;
|
|
|
|
p_lli = txd->p_lli;
|
|
v_lli = txd->v_lli;
|
|
|
|
while (v_lli) {
|
|
v_next = v_lli->v_lli_next;
|
|
p_next = v_lli->p_lli_next;
|
|
|
|
dma_pool_free(sdev->pool, v_lli, p_lli);
|
|
|
|
v_lli = v_next;
|
|
p_lli = p_next;
|
|
}
|
|
|
|
kfree(txd);
|
|
}
|
|
|
|
static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
|
|
struct virt_dma_desc *desc = vchan_next_desc(&vchan->vc);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
u32 irq_val, irq_reg, irq_offset;
|
|
|
|
if (!pchan)
|
|
return -EAGAIN;
|
|
|
|
if (!desc) {
|
|
pchan->desc = NULL;
|
|
pchan->done = NULL;
|
|
return -EAGAIN;
|
|
}
|
|
|
|
list_del(&desc->node);
|
|
|
|
pchan->desc = to_sun6i_desc(&desc->tx);
|
|
pchan->done = NULL;
|
|
|
|
sun6i_dma_dump_lli(vchan, pchan->desc->v_lli);
|
|
|
|
irq_reg = pchan->idx / DMA_IRQ_CHAN_NR;
|
|
irq_offset = pchan->idx % DMA_IRQ_CHAN_NR;
|
|
|
|
vchan->irq_type = vchan->cyclic ? DMA_IRQ_PKG : DMA_IRQ_QUEUE;
|
|
|
|
irq_val = readl(sdev->base + DMA_IRQ_EN(irq_reg));
|
|
irq_val &= ~((DMA_IRQ_HALF | DMA_IRQ_PKG | DMA_IRQ_QUEUE) <<
|
|
(irq_offset * DMA_IRQ_CHAN_WIDTH));
|
|
irq_val |= vchan->irq_type << (irq_offset * DMA_IRQ_CHAN_WIDTH);
|
|
writel(irq_val, sdev->base + DMA_IRQ_EN(irq_reg));
|
|
|
|
writel(pchan->desc->p_lli, pchan->base + DMA_CHAN_LLI_ADDR);
|
|
writel(DMA_CHAN_ENABLE_START, pchan->base + DMA_CHAN_ENABLE);
|
|
|
|
sun6i_dma_dump_com_regs(sdev);
|
|
sun6i_dma_dump_chan_regs(sdev, pchan);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sun6i_dma_tasklet(struct tasklet_struct *t)
|
|
{
|
|
struct sun6i_dma_dev *sdev = from_tasklet(sdev, t, task);
|
|
struct sun6i_vchan *vchan;
|
|
struct sun6i_pchan *pchan;
|
|
unsigned int pchan_alloc = 0;
|
|
unsigned int pchan_idx;
|
|
|
|
list_for_each_entry(vchan, &sdev->slave.channels, vc.chan.device_node) {
|
|
spin_lock_irq(&vchan->vc.lock);
|
|
|
|
pchan = vchan->phy;
|
|
|
|
if (pchan && pchan->done) {
|
|
if (sun6i_dma_start_desc(vchan)) {
|
|
/*
|
|
* No current txd associated with this channel
|
|
*/
|
|
dev_dbg(sdev->slave.dev, "pchan %u: free\n",
|
|
pchan->idx);
|
|
|
|
/* Mark this channel free */
|
|
vchan->phy = NULL;
|
|
pchan->vchan = NULL;
|
|
}
|
|
}
|
|
spin_unlock_irq(&vchan->vc.lock);
|
|
}
|
|
|
|
spin_lock_irq(&sdev->lock);
|
|
for (pchan_idx = 0; pchan_idx < sdev->num_pchans; pchan_idx++) {
|
|
pchan = &sdev->pchans[pchan_idx];
|
|
|
|
if (pchan->vchan || list_empty(&sdev->pending))
|
|
continue;
|
|
|
|
vchan = list_first_entry(&sdev->pending,
|
|
struct sun6i_vchan, node);
|
|
|
|
/* Remove from pending channels */
|
|
list_del_init(&vchan->node);
|
|
pchan_alloc |= BIT(pchan_idx);
|
|
|
|
/* Mark this channel allocated */
|
|
pchan->vchan = vchan;
|
|
vchan->phy = pchan;
|
|
dev_dbg(sdev->slave.dev, "pchan %u: alloc vchan %p\n",
|
|
pchan->idx, &vchan->vc);
|
|
}
|
|
spin_unlock_irq(&sdev->lock);
|
|
|
|
for (pchan_idx = 0; pchan_idx < sdev->num_pchans; pchan_idx++) {
|
|
if (!(pchan_alloc & BIT(pchan_idx)))
|
|
continue;
|
|
|
|
pchan = sdev->pchans + pchan_idx;
|
|
vchan = pchan->vchan;
|
|
if (vchan) {
|
|
spin_lock_irq(&vchan->vc.lock);
|
|
sun6i_dma_start_desc(vchan);
|
|
spin_unlock_irq(&vchan->vc.lock);
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct sun6i_dma_dev *sdev = dev_id;
|
|
struct sun6i_vchan *vchan;
|
|
struct sun6i_pchan *pchan;
|
|
int i, j, ret = IRQ_NONE;
|
|
u32 status;
|
|
|
|
for (i = 0; i < sdev->num_pchans / DMA_IRQ_CHAN_NR; i++) {
|
|
status = readl(sdev->base + DMA_IRQ_STAT(i));
|
|
if (!status)
|
|
continue;
|
|
|
|
dev_dbg(sdev->slave.dev, "DMA irq status %s: 0x%x\n",
|
|
i ? "high" : "low", status);
|
|
|
|
writel(status, sdev->base + DMA_IRQ_STAT(i));
|
|
|
|
for (j = 0; (j < DMA_IRQ_CHAN_NR) && status; j++) {
|
|
pchan = sdev->pchans + j;
|
|
vchan = pchan->vchan;
|
|
if (vchan && (status & vchan->irq_type)) {
|
|
if (vchan->cyclic) {
|
|
vchan_cyclic_callback(&pchan->desc->vd);
|
|
} else {
|
|
spin_lock(&vchan->vc.lock);
|
|
vchan_cookie_complete(&pchan->desc->vd);
|
|
pchan->done = pchan->desc;
|
|
spin_unlock(&vchan->vc.lock);
|
|
}
|
|
}
|
|
|
|
status = status >> DMA_IRQ_CHAN_WIDTH;
|
|
}
|
|
|
|
if (!atomic_read(&sdev->tasklet_shutdown))
|
|
tasklet_schedule(&sdev->task);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int set_config(struct sun6i_dma_dev *sdev,
|
|
struct dma_slave_config *sconfig,
|
|
enum dma_transfer_direction direction,
|
|
u32 *p_cfg)
|
|
{
|
|
enum dma_slave_buswidth src_addr_width, dst_addr_width;
|
|
u32 src_maxburst, dst_maxburst;
|
|
s8 src_width, dst_width, src_burst, dst_burst;
|
|
|
|
src_addr_width = sconfig->src_addr_width;
|
|
dst_addr_width = sconfig->dst_addr_width;
|
|
src_maxburst = sconfig->src_maxburst;
|
|
dst_maxburst = sconfig->dst_maxburst;
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
|
|
src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
src_maxburst = src_maxburst ? src_maxburst : 8;
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
|
|
dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
dst_maxburst = dst_maxburst ? dst_maxburst : 8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(BIT(src_addr_width) & sdev->slave.src_addr_widths))
|
|
return -EINVAL;
|
|
if (!(BIT(dst_addr_width) & sdev->slave.dst_addr_widths))
|
|
return -EINVAL;
|
|
if (!(BIT(src_maxburst) & sdev->cfg->src_burst_lengths))
|
|
return -EINVAL;
|
|
if (!(BIT(dst_maxburst) & sdev->cfg->dst_burst_lengths))
|
|
return -EINVAL;
|
|
|
|
src_width = convert_buswidth(src_addr_width);
|
|
dst_width = convert_buswidth(dst_addr_width);
|
|
dst_burst = convert_burst(dst_maxburst);
|
|
src_burst = convert_burst(src_maxburst);
|
|
|
|
*p_cfg = DMA_CHAN_CFG_SRC_WIDTH(src_width) |
|
|
DMA_CHAN_CFG_DST_WIDTH(dst_width);
|
|
|
|
sdev->cfg->set_burst_length(p_cfg, src_burst, dst_burst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
|
|
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
|
|
size_t len, unsigned long flags)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_dma_lli *v_lli;
|
|
struct sun6i_desc *txd;
|
|
dma_addr_t p_lli;
|
|
s8 burst, width;
|
|
|
|
dev_dbg(chan2dev(chan),
|
|
"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
|
|
__func__, vchan->vc.chan.chan_id, &dest, &src, len, flags);
|
|
|
|
if (!len)
|
|
return NULL;
|
|
|
|
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
|
|
if (!txd)
|
|
return NULL;
|
|
|
|
v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
|
|
if (!v_lli) {
|
|
dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
|
|
goto err_txd_free;
|
|
}
|
|
|
|
v_lli->src = src;
|
|
v_lli->dst = dest;
|
|
v_lli->len = len;
|
|
v_lli->para = NORMAL_WAIT;
|
|
|
|
burst = convert_burst(8);
|
|
width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
|
|
v_lli->cfg = DMA_CHAN_CFG_SRC_WIDTH(width) |
|
|
DMA_CHAN_CFG_DST_WIDTH(width);
|
|
|
|
sdev->cfg->set_burst_length(&v_lli->cfg, burst, burst);
|
|
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, DRQ_SDRAM);
|
|
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, LINEAR_MODE);
|
|
|
|
sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
|
|
|
|
sun6i_dma_dump_lli(vchan, v_lli);
|
|
|
|
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
|
|
|
|
err_txd_free:
|
|
kfree(txd);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
|
|
struct dma_chan *chan, struct scatterlist *sgl,
|
|
unsigned int sg_len, enum dma_transfer_direction dir,
|
|
unsigned long flags, void *context)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct dma_slave_config *sconfig = &vchan->cfg;
|
|
struct sun6i_dma_lli *v_lli, *prev = NULL;
|
|
struct sun6i_desc *txd;
|
|
struct scatterlist *sg;
|
|
dma_addr_t p_lli;
|
|
u32 lli_cfg;
|
|
int i, ret;
|
|
|
|
if (!sgl)
|
|
return NULL;
|
|
|
|
ret = set_config(sdev, sconfig, dir, &lli_cfg);
|
|
if (ret) {
|
|
dev_err(chan2dev(chan), "Invalid DMA configuration\n");
|
|
return NULL;
|
|
}
|
|
|
|
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
|
|
if (!txd)
|
|
return NULL;
|
|
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
|
|
if (!v_lli)
|
|
goto err_lli_free;
|
|
|
|
v_lli->len = sg_dma_len(sg);
|
|
v_lli->para = NORMAL_WAIT;
|
|
|
|
if (dir == DMA_MEM_TO_DEV) {
|
|
v_lli->src = sg_dma_address(sg);
|
|
v_lli->dst = sconfig->dst_addr;
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);
|
|
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, IO_MODE);
|
|
|
|
dev_dbg(chan2dev(chan),
|
|
"%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
|
|
__func__, vchan->vc.chan.chan_id,
|
|
&sconfig->dst_addr, &sg_dma_address(sg),
|
|
sg_dma_len(sg), flags);
|
|
|
|
} else {
|
|
v_lli->src = sconfig->src_addr;
|
|
v_lli->dst = sg_dma_address(sg);
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);
|
|
sdev->cfg->set_mode(&v_lli->cfg, IO_MODE, LINEAR_MODE);
|
|
|
|
dev_dbg(chan2dev(chan),
|
|
"%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n",
|
|
__func__, vchan->vc.chan.chan_id,
|
|
&sg_dma_address(sg), &sconfig->src_addr,
|
|
sg_dma_len(sg), flags);
|
|
}
|
|
|
|
prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
|
|
}
|
|
|
|
dev_dbg(chan2dev(chan), "First: %pad\n", &txd->p_lli);
|
|
for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
|
|
sun6i_dma_dump_lli(vchan, prev);
|
|
|
|
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
|
|
|
|
err_lli_free:
|
|
for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
|
|
dma_pool_free(sdev->pool, prev, virt_to_phys(prev));
|
|
kfree(txd);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_cyclic(
|
|
struct dma_chan *chan,
|
|
dma_addr_t buf_addr,
|
|
size_t buf_len,
|
|
size_t period_len,
|
|
enum dma_transfer_direction dir,
|
|
unsigned long flags)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct dma_slave_config *sconfig = &vchan->cfg;
|
|
struct sun6i_dma_lli *v_lli, *prev = NULL;
|
|
struct sun6i_desc *txd;
|
|
dma_addr_t p_lli;
|
|
u32 lli_cfg;
|
|
unsigned int i, periods = buf_len / period_len;
|
|
int ret;
|
|
|
|
ret = set_config(sdev, sconfig, dir, &lli_cfg);
|
|
if (ret) {
|
|
dev_err(chan2dev(chan), "Invalid DMA configuration\n");
|
|
return NULL;
|
|
}
|
|
|
|
txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
|
|
if (!txd)
|
|
return NULL;
|
|
|
|
for (i = 0; i < periods; i++) {
|
|
v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
|
|
if (!v_lli) {
|
|
dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
|
|
goto err_lli_free;
|
|
}
|
|
|
|
v_lli->len = period_len;
|
|
v_lli->para = NORMAL_WAIT;
|
|
|
|
if (dir == DMA_MEM_TO_DEV) {
|
|
v_lli->src = buf_addr + period_len * i;
|
|
v_lli->dst = sconfig->dst_addr;
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, DRQ_SDRAM, vchan->port);
|
|
sdev->cfg->set_mode(&v_lli->cfg, LINEAR_MODE, IO_MODE);
|
|
} else {
|
|
v_lli->src = sconfig->src_addr;
|
|
v_lli->dst = buf_addr + period_len * i;
|
|
v_lli->cfg = lli_cfg;
|
|
sdev->cfg->set_drq(&v_lli->cfg, vchan->port, DRQ_SDRAM);
|
|
sdev->cfg->set_mode(&v_lli->cfg, IO_MODE, LINEAR_MODE);
|
|
}
|
|
|
|
prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
|
|
}
|
|
|
|
prev->p_lli_next = txd->p_lli; /* cyclic list */
|
|
|
|
vchan->cyclic = true;
|
|
|
|
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
|
|
|
|
err_lli_free:
|
|
for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
|
|
dma_pool_free(sdev->pool, prev, virt_to_phys(prev));
|
|
kfree(txd);
|
|
return NULL;
|
|
}
|
|
|
|
static int sun6i_dma_config(struct dma_chan *chan,
|
|
struct dma_slave_config *config)
|
|
{
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
|
|
memcpy(&vchan->cfg, config, sizeof(*config));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_dma_pause(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
|
|
dev_dbg(chan2dev(chan), "vchan %p: pause\n", &vchan->vc);
|
|
|
|
if (pchan) {
|
|
writel(DMA_CHAN_PAUSE_PAUSE,
|
|
pchan->base + DMA_CHAN_PAUSE);
|
|
} else {
|
|
spin_lock(&sdev->lock);
|
|
list_del_init(&vchan->node);
|
|
spin_unlock(&sdev->lock);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_dma_resume(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(chan2dev(chan), "vchan %p: resume\n", &vchan->vc);
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
if (pchan) {
|
|
writel(DMA_CHAN_PAUSE_RESUME,
|
|
pchan->base + DMA_CHAN_PAUSE);
|
|
} else if (!list_empty(&vchan->vc.desc_issued)) {
|
|
spin_lock(&sdev->lock);
|
|
list_add_tail(&vchan->node, &sdev->pending);
|
|
spin_unlock(&sdev->lock);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_dma_terminate_all(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
unsigned long flags;
|
|
LIST_HEAD(head);
|
|
|
|
spin_lock(&sdev->lock);
|
|
list_del_init(&vchan->node);
|
|
spin_unlock(&sdev->lock);
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
if (vchan->cyclic) {
|
|
vchan->cyclic = false;
|
|
if (pchan && pchan->desc) {
|
|
struct virt_dma_desc *vd = &pchan->desc->vd;
|
|
struct virt_dma_chan *vc = &vchan->vc;
|
|
|
|
list_add_tail(&vd->node, &vc->desc_completed);
|
|
}
|
|
}
|
|
|
|
vchan_get_all_descriptors(&vchan->vc, &head);
|
|
|
|
if (pchan) {
|
|
writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
|
|
writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
|
|
|
|
vchan->phy = NULL;
|
|
pchan->vchan = NULL;
|
|
pchan->desc = NULL;
|
|
pchan->done = NULL;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
|
|
vchan_dma_desc_free_list(&vchan->vc, &head);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *state)
|
|
{
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
struct sun6i_pchan *pchan = vchan->phy;
|
|
struct sun6i_dma_lli *lli;
|
|
struct virt_dma_desc *vd;
|
|
struct sun6i_desc *txd;
|
|
enum dma_status ret;
|
|
unsigned long flags;
|
|
size_t bytes = 0;
|
|
|
|
ret = dma_cookie_status(chan, cookie, state);
|
|
if (ret == DMA_COMPLETE || !state)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
vd = vchan_find_desc(&vchan->vc, cookie);
|
|
txd = to_sun6i_desc(&vd->tx);
|
|
|
|
if (vd) {
|
|
for (lli = txd->v_lli; lli != NULL; lli = lli->v_lli_next)
|
|
bytes += lli->len;
|
|
} else if (!pchan || !pchan->desc) {
|
|
bytes = 0;
|
|
} else {
|
|
bytes = sun6i_get_chan_size(pchan);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
|
|
dma_set_residue(state, bytes);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sun6i_dma_issue_pending(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&vchan->vc.lock, flags);
|
|
|
|
if (vchan_issue_pending(&vchan->vc)) {
|
|
spin_lock(&sdev->lock);
|
|
|
|
if (!vchan->phy && list_empty(&vchan->node)) {
|
|
list_add_tail(&vchan->node, &sdev->pending);
|
|
tasklet_schedule(&sdev->task);
|
|
dev_dbg(chan2dev(chan), "vchan %p: issued\n",
|
|
&vchan->vc);
|
|
}
|
|
|
|
spin_unlock(&sdev->lock);
|
|
} else {
|
|
dev_dbg(chan2dev(chan), "vchan %p: nothing to issue\n",
|
|
&vchan->vc);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vchan->vc.lock, flags);
|
|
}
|
|
|
|
static void sun6i_dma_free_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
|
|
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sdev->lock, flags);
|
|
list_del_init(&vchan->node);
|
|
spin_unlock_irqrestore(&sdev->lock, flags);
|
|
|
|
vchan_free_chan_resources(&vchan->vc);
|
|
}
|
|
|
|
static struct dma_chan *sun6i_dma_of_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct sun6i_dma_dev *sdev = ofdma->of_dma_data;
|
|
struct sun6i_vchan *vchan;
|
|
struct dma_chan *chan;
|
|
u8 port = dma_spec->args[0];
|
|
|
|
if (port > sdev->max_request)
|
|
return NULL;
|
|
|
|
chan = dma_get_any_slave_channel(&sdev->slave);
|
|
if (!chan)
|
|
return NULL;
|
|
|
|
vchan = to_sun6i_vchan(chan);
|
|
vchan->port = port;
|
|
|
|
return chan;
|
|
}
|
|
|
|
static inline void sun6i_kill_tasklet(struct sun6i_dma_dev *sdev)
|
|
{
|
|
/* Disable all interrupts from DMA */
|
|
writel(0, sdev->base + DMA_IRQ_EN(0));
|
|
writel(0, sdev->base + DMA_IRQ_EN(1));
|
|
|
|
/* Prevent spurious interrupts from scheduling the tasklet */
|
|
atomic_inc(&sdev->tasklet_shutdown);
|
|
|
|
/* Make sure we won't have any further interrupts */
|
|
devm_free_irq(sdev->slave.dev, sdev->irq, sdev);
|
|
|
|
/* Actually prevent the tasklet from being scheduled */
|
|
tasklet_kill(&sdev->task);
|
|
}
|
|
|
|
static inline void sun6i_dma_free(struct sun6i_dma_dev *sdev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sdev->num_vchans; i++) {
|
|
struct sun6i_vchan *vchan = &sdev->vchans[i];
|
|
|
|
list_del(&vchan->vc.chan.device_node);
|
|
tasklet_kill(&vchan->vc.task);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For A31:
|
|
*
|
|
* There's 16 physical channels that can work in parallel.
|
|
*
|
|
* However we have 30 different endpoints for our requests.
|
|
*
|
|
* Since the channels are able to handle only an unidirectional
|
|
* transfer, we need to allocate more virtual channels so that
|
|
* everyone can grab one channel.
|
|
*
|
|
* Some devices can't work in both direction (mostly because it
|
|
* wouldn't make sense), so we have a bit fewer virtual channels than
|
|
* 2 channels per endpoints.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun6i_a31_dma_cfg = {
|
|
.nr_max_channels = 16,
|
|
.nr_max_requests = 30,
|
|
.nr_max_vchans = 53,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
/*
|
|
* The A23 only has 8 physical channels, a maximum DRQ port id of 24,
|
|
* and a total of 37 usable source and destination endpoints.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun8i_a23_dma_cfg = {
|
|
.nr_max_channels = 8,
|
|
.nr_max_requests = 24,
|
|
.nr_max_vchans = 37,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
|
|
.nr_max_channels = 8,
|
|
.nr_max_requests = 28,
|
|
.nr_max_vchans = 39,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
/*
|
|
* The H3 has 12 physical channels, a maximum DRQ port id of 27,
|
|
* and a total of 34 usable source and destination endpoints.
|
|
* It also supports additional burst lengths and bus widths,
|
|
* and the burst length fields have different offsets.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun8i_h3_dma_cfg = {
|
|
.nr_max_channels = 12,
|
|
.nr_max_requests = 27,
|
|
.nr_max_vchans = 34,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
};
|
|
|
|
/*
|
|
* The A64 binding uses the number of dma channels from the
|
|
* device tree node.
|
|
*/
|
|
static struct sun6i_dma_config sun50i_a64_dma_cfg = {
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
};
|
|
|
|
/*
|
|
* TODO: Add support for more than 4g physical addressing.
|
|
*
|
|
* The A100 binding uses the number of dma channels from the
|
|
* device tree node.
|
|
*/
|
|
static struct sun6i_dma_config sun50i_a100_dma_cfg = {
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_h6,
|
|
.set_mode = sun6i_set_mode_h6,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.has_mbus_clk = true,
|
|
};
|
|
|
|
/*
|
|
* The H6 binding uses the number of dma channels from the
|
|
* device tree node.
|
|
*/
|
|
static struct sun6i_dma_config sun50i_h6_dma_cfg = {
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_h3,
|
|
.set_burst_length = sun6i_set_burst_length_h3,
|
|
.set_drq = sun6i_set_drq_h6,
|
|
.set_mode = sun6i_set_mode_h6,
|
|
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
|
|
.has_mbus_clk = true,
|
|
};
|
|
|
|
/*
|
|
* The V3s have only 8 physical channels, a maximum DRQ port id of 23,
|
|
* and a total of 24 usable source and destination endpoints.
|
|
*/
|
|
|
|
static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
|
|
.nr_max_channels = 8,
|
|
.nr_max_requests = 23,
|
|
.nr_max_vchans = 24,
|
|
.clock_autogate_enable = sun6i_enable_clock_autogate_a23,
|
|
.set_burst_length = sun6i_set_burst_length_a31,
|
|
.set_drq = sun6i_set_drq_a31,
|
|
.set_mode = sun6i_set_mode_a31,
|
|
.src_burst_lengths = BIT(1) | BIT(8),
|
|
.dst_burst_lengths = BIT(1) | BIT(8),
|
|
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
|
|
};
|
|
|
|
static const struct of_device_id sun6i_dma_match[] = {
|
|
{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
|
|
{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
|
|
{ .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
|
|
{ .compatible = "allwinner,sun50i-a100-dma", .data = &sun50i_a100_dma_cfg },
|
|
{ .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun6i_dma_match);
|
|
|
|
static int sun6i_dma_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct sun6i_dma_dev *sdc;
|
|
struct resource *res;
|
|
int ret, i;
|
|
|
|
sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
|
|
if (!sdc)
|
|
return -ENOMEM;
|
|
|
|
sdc->cfg = of_device_get_match_data(&pdev->dev);
|
|
if (!sdc->cfg)
|
|
return -ENODEV;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
sdc->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(sdc->base))
|
|
return PTR_ERR(sdc->base);
|
|
|
|
sdc->irq = platform_get_irq(pdev, 0);
|
|
if (sdc->irq < 0)
|
|
return sdc->irq;
|
|
|
|
sdc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sdc->clk)) {
|
|
dev_err(&pdev->dev, "No clock specified\n");
|
|
return PTR_ERR(sdc->clk);
|
|
}
|
|
|
|
if (sdc->cfg->has_mbus_clk) {
|
|
sdc->clk_mbus = devm_clk_get(&pdev->dev, "mbus");
|
|
if (IS_ERR(sdc->clk_mbus)) {
|
|
dev_err(&pdev->dev, "No mbus clock specified\n");
|
|
return PTR_ERR(sdc->clk_mbus);
|
|
}
|
|
}
|
|
|
|
sdc->rstc = devm_reset_control_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sdc->rstc)) {
|
|
dev_err(&pdev->dev, "No reset controller specified\n");
|
|
return PTR_ERR(sdc->rstc);
|
|
}
|
|
|
|
sdc->pool = dmam_pool_create(dev_name(&pdev->dev), &pdev->dev,
|
|
sizeof(struct sun6i_dma_lli), 4, 0);
|
|
if (!sdc->pool) {
|
|
dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, sdc);
|
|
INIT_LIST_HEAD(&sdc->pending);
|
|
spin_lock_init(&sdc->lock);
|
|
|
|
dma_cap_set(DMA_PRIVATE, sdc->slave.cap_mask);
|
|
dma_cap_set(DMA_MEMCPY, sdc->slave.cap_mask);
|
|
dma_cap_set(DMA_SLAVE, sdc->slave.cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, sdc->slave.cap_mask);
|
|
|
|
INIT_LIST_HEAD(&sdc->slave.channels);
|
|
sdc->slave.device_free_chan_resources = sun6i_dma_free_chan_resources;
|
|
sdc->slave.device_tx_status = sun6i_dma_tx_status;
|
|
sdc->slave.device_issue_pending = sun6i_dma_issue_pending;
|
|
sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg;
|
|
sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
|
|
sdc->slave.device_prep_dma_cyclic = sun6i_dma_prep_dma_cyclic;
|
|
sdc->slave.copy_align = DMAENGINE_ALIGN_4_BYTES;
|
|
sdc->slave.device_config = sun6i_dma_config;
|
|
sdc->slave.device_pause = sun6i_dma_pause;
|
|
sdc->slave.device_resume = sun6i_dma_resume;
|
|
sdc->slave.device_terminate_all = sun6i_dma_terminate_all;
|
|
sdc->slave.src_addr_widths = sdc->cfg->src_addr_widths;
|
|
sdc->slave.dst_addr_widths = sdc->cfg->dst_addr_widths;
|
|
sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
|
|
BIT(DMA_MEM_TO_DEV);
|
|
sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
|
|
sdc->slave.dev = &pdev->dev;
|
|
|
|
sdc->num_pchans = sdc->cfg->nr_max_channels;
|
|
sdc->num_vchans = sdc->cfg->nr_max_vchans;
|
|
sdc->max_request = sdc->cfg->nr_max_requests;
|
|
|
|
ret = of_property_read_u32(np, "dma-channels", &sdc->num_pchans);
|
|
if (ret && !sdc->num_pchans) {
|
|
dev_err(&pdev->dev, "Can't get dma-channels.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "dma-requests", &sdc->max_request);
|
|
if (ret && !sdc->max_request) {
|
|
dev_info(&pdev->dev, "Missing dma-requests, using %u.\n",
|
|
DMA_CHAN_MAX_DRQ_A31);
|
|
sdc->max_request = DMA_CHAN_MAX_DRQ_A31;
|
|
}
|
|
|
|
/*
|
|
* If the number of vchans is not specified, derive it from the
|
|
* highest port number, at most one channel per port and direction.
|
|
*/
|
|
if (!sdc->num_vchans)
|
|
sdc->num_vchans = 2 * (sdc->max_request + 1);
|
|
|
|
sdc->pchans = devm_kcalloc(&pdev->dev, sdc->num_pchans,
|
|
sizeof(struct sun6i_pchan), GFP_KERNEL);
|
|
if (!sdc->pchans)
|
|
return -ENOMEM;
|
|
|
|
sdc->vchans = devm_kcalloc(&pdev->dev, sdc->num_vchans,
|
|
sizeof(struct sun6i_vchan), GFP_KERNEL);
|
|
if (!sdc->vchans)
|
|
return -ENOMEM;
|
|
|
|
tasklet_setup(&sdc->task, sun6i_dma_tasklet);
|
|
|
|
for (i = 0; i < sdc->num_pchans; i++) {
|
|
struct sun6i_pchan *pchan = &sdc->pchans[i];
|
|
|
|
pchan->idx = i;
|
|
pchan->base = sdc->base + 0x100 + i * 0x40;
|
|
}
|
|
|
|
for (i = 0; i < sdc->num_vchans; i++) {
|
|
struct sun6i_vchan *vchan = &sdc->vchans[i];
|
|
|
|
INIT_LIST_HEAD(&vchan->node);
|
|
vchan->vc.desc_free = sun6i_dma_free_desc;
|
|
vchan_init(&vchan->vc, &sdc->slave);
|
|
}
|
|
|
|
ret = reset_control_deassert(sdc->rstc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't deassert the device from reset\n");
|
|
goto err_chan_free;
|
|
}
|
|
|
|
ret = clk_prepare_enable(sdc->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't enable the clock\n");
|
|
goto err_reset_assert;
|
|
}
|
|
|
|
if (sdc->cfg->has_mbus_clk) {
|
|
ret = clk_prepare_enable(sdc->clk_mbus);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't enable mbus clock\n");
|
|
goto err_clk_disable;
|
|
}
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, sdc->irq, sun6i_dma_interrupt, 0,
|
|
dev_name(&pdev->dev), sdc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Cannot request IRQ\n");
|
|
goto err_mbus_clk_disable;
|
|
}
|
|
|
|
ret = dma_async_device_register(&sdc->slave);
|
|
if (ret) {
|
|
dev_warn(&pdev->dev, "Failed to register DMA engine device\n");
|
|
goto err_irq_disable;
|
|
}
|
|
|
|
ret = of_dma_controller_register(pdev->dev.of_node, sun6i_dma_of_xlate,
|
|
sdc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "of_dma_controller_register failed\n");
|
|
goto err_dma_unregister;
|
|
}
|
|
|
|
if (sdc->cfg->clock_autogate_enable)
|
|
sdc->cfg->clock_autogate_enable(sdc);
|
|
|
|
return 0;
|
|
|
|
err_dma_unregister:
|
|
dma_async_device_unregister(&sdc->slave);
|
|
err_irq_disable:
|
|
sun6i_kill_tasklet(sdc);
|
|
err_mbus_clk_disable:
|
|
clk_disable_unprepare(sdc->clk_mbus);
|
|
err_clk_disable:
|
|
clk_disable_unprepare(sdc->clk);
|
|
err_reset_assert:
|
|
reset_control_assert(sdc->rstc);
|
|
err_chan_free:
|
|
sun6i_dma_free(sdc);
|
|
return ret;
|
|
}
|
|
|
|
static int sun6i_dma_remove(struct platform_device *pdev)
|
|
{
|
|
struct sun6i_dma_dev *sdc = platform_get_drvdata(pdev);
|
|
|
|
of_dma_controller_free(pdev->dev.of_node);
|
|
dma_async_device_unregister(&sdc->slave);
|
|
|
|
sun6i_kill_tasklet(sdc);
|
|
|
|
clk_disable_unprepare(sdc->clk_mbus);
|
|
clk_disable_unprepare(sdc->clk);
|
|
reset_control_assert(sdc->rstc);
|
|
|
|
sun6i_dma_free(sdc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sun6i_dma_driver = {
|
|
.probe = sun6i_dma_probe,
|
|
.remove = sun6i_dma_remove,
|
|
.driver = {
|
|
.name = "sun6i-dma",
|
|
.of_match_table = sun6i_dma_match,
|
|
},
|
|
};
|
|
module_platform_driver(sun6i_dma_driver);
|
|
|
|
MODULE_DESCRIPTION("Allwinner A31 DMA Controller Driver");
|
|
MODULE_AUTHOR("Sugar <shuge@allwinnertech.com>");
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
|
MODULE_LICENSE("GPL");
|