korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-19 18:24:14 +08:00
Code Issues Packages Projects Releases Wiki Activity
ad3819c09b
linux/drivers/scsi/bfa/bfa_defs.h
Vijaya Mohan Guvva 28d358d01e [SCSI] bfa: Firmware patch simplification 
This patch includes change to enable firmware patch simplication
feature. This feature is targeted to address the requirement to have
independent patch release for firmware. Prior to 3.2.3, releasing a
patch fix for firmware requires changes to bfa, to use new firmware
images. But with these changes, if the new firmware is flashed on to the
HBA with brocade adapter management utilites, driver uses the new
firmware after checking the patch release byte in the firmware version.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19 07:39:04 -08:00

1288 lines
38 KiB
C
Raw Blame History

/*
* Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
* All rights reserved
* www.brocade.com
*
* Linux driver for Brocade Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
* published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#ifndef __BFA_DEFS_H__
#define __BFA_DEFS_H__
#include "bfa_fc.h"
#include "bfad_drv.h"
#define BFA_MFG_SERIALNUM_SIZE 11
#define STRSZ(_n) (((_n) + 4) & ~3)
/*
* Manufacturing card type
*/
enum {
BFA_MFG_TYPE_CB_MAX = 825, /* Crossbow card type max */
BFA_MFG_TYPE_FC8P2 = 825, /* 8G 2port FC card */
BFA_MFG_TYPE_FC8P1 = 815, /* 8G 1port FC card */
BFA_MFG_TYPE_FC4P2 = 425, /* 4G 2port FC card */
BFA_MFG_TYPE_FC4P1 = 415, /* 4G 1port FC card */
BFA_MFG_TYPE_CNA10P2 = 1020, /* 10G 2port CNA card */
BFA_MFG_TYPE_CNA10P1 = 1010, /* 10G 1port CNA card */
BFA_MFG_TYPE_JAYHAWK = 804, /* Jayhawk mezz card */
BFA_MFG_TYPE_WANCHESE = 1007, /* Wanchese mezz card */
BFA_MFG_TYPE_ASTRA = 807, /* Astra mezz card */
BFA_MFG_TYPE_LIGHTNING_P0 = 902, /* Lightning mezz card - old */
BFA_MFG_TYPE_LIGHTNING = 1741, /* Lightning mezz card */
BFA_MFG_TYPE_PROWLER_F = 1560, /* Prowler FC only cards */
BFA_MFG_TYPE_PROWLER_N = 1410, /* Prowler NIC only cards */
BFA_MFG_TYPE_PROWLER_C = 1710, /* Prowler CNA only cards */
BFA_MFG_TYPE_PROWLER_D = 1860, /* Prowler Dual cards */
BFA_MFG_TYPE_CHINOOK = 1867, /* Chinook cards */
BFA_MFG_TYPE_CHINOOK2 = 1869, /*!< Chinook2 cards */
BFA_MFG_TYPE_INVALID = 0, /* Invalid card type */
};
#pragma pack(1)
/*
* Check if Mezz card
*/
#define bfa_mfg_is_mezz(type) (( \
(type) == BFA_MFG_TYPE_JAYHAWK || \
(type) == BFA_MFG_TYPE_WANCHESE || \
(type) == BFA_MFG_TYPE_ASTRA || \
(type) == BFA_MFG_TYPE_LIGHTNING_P0 || \
(type) == BFA_MFG_TYPE_LIGHTNING || \
(type) == BFA_MFG_TYPE_CHINOOK || \
(type) == BFA_MFG_TYPE_CHINOOK2))
/*
* Check if the card having old wwn/mac handling
*/
#define bfa_mfg_is_old_wwn_mac_model(type) (( \
(type) == BFA_MFG_TYPE_FC8P2 || \
(type) == BFA_MFG_TYPE_FC8P1 || \
(type) == BFA_MFG_TYPE_FC4P2 || \
(type) == BFA_MFG_TYPE_FC4P1 || \
(type) == BFA_MFG_TYPE_CNA10P2 || \
(type) == BFA_MFG_TYPE_CNA10P1 || \
(type) == BFA_MFG_TYPE_JAYHAWK || \
(type) == BFA_MFG_TYPE_WANCHESE))
#define bfa_mfg_increment_wwn_mac(m, i) \
do { \
u32 t = ((u32)(m)[0] << 16) | ((u32)(m)[1] << 8) | \
(u32)(m)[2]; \
t += (i); \
(m)[0] = (t >> 16) & 0xFF; \
(m)[1] = (t >> 8) & 0xFF; \
(m)[2] = t & 0xFF; \
} while (0)
/*
* VPD data length
*/
#define BFA_MFG_VPD_LEN 512
/*
* VPD vendor tag
*/
enum {
BFA_MFG_VPD_UNKNOWN = 0, /* vendor unknown */
BFA_MFG_VPD_IBM = 1, /* vendor IBM */
BFA_MFG_VPD_HP = 2, /* vendor HP */
BFA_MFG_VPD_DELL = 3, /* vendor DELL */
BFA_MFG_VPD_PCI_IBM = 0x08, /* PCI VPD IBM */
BFA_MFG_VPD_PCI_HP = 0x10, /* PCI VPD HP */
BFA_MFG_VPD_PCI_DELL = 0x20, /* PCI VPD DELL */
BFA_MFG_VPD_PCI_BRCD = 0xf8, /* PCI VPD Brocade */
};
/*
* All numerical fields are in big-endian format.
*/
struct bfa_mfg_vpd_s {
u8 version; /* vpd data version */
u8 vpd_sig[3]; /* characters 'V', 'P', 'D' */
u8 chksum; /* u8 checksum */
u8 vendor; /* vendor */
u8 len; /* vpd data length excluding header */
u8 rsv;
u8 data[BFA_MFG_VPD_LEN]; /* vpd data */
};
#pragma pack()
/*
* Status return values
*/
enum bfa_status {
BFA_STATUS_OK = 0, /* Success */
BFA_STATUS_FAILED = 1, /* Operation failed */
BFA_STATUS_EINVAL = 2, /* Invalid params Check input
* parameters */
BFA_STATUS_ENOMEM = 3, /* Out of resources */
BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists,
* contact support */
BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
BFA_STATUS_BADFLASH = 9, /* Flash is bad */
BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted */
BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */
BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */
BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */
BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */
BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */
BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */
BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported limit */
BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed setting */
BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */
BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */
BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */
BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */
BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */
BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */
BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port */
BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the rport */
BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists
* contact support */
BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */
BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled */
BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational */
BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version mismatch */
BFA_STATUS_DIAG_BUSY = 71, /* diag busy */
BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
BFA_STATUS_ERROR_TRL_ENABLED = 87, /* TRL is enabled */
BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */
BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */
BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot
* configuration */
BFA_STATUS_BAD_FWCFG = 156, /* Bad firmware configuration */
BFA_STATUS_INVALID_VENDOR = 158, /* Invalid switch vendor */
BFA_STATUS_SFP_NOT_READY = 159, /* SFP info is not ready. Retry */
BFA_STATUS_TRUNK_ENABLED = 164, /* Trunk is already enabled on
* this adapter */
BFA_STATUS_TRUNK_DISABLED = 165, /* Trunking is disabled on
* the adapter */
BFA_STATUS_IOPROFILE_OFF = 175, /* IO profile OFF */
BFA_STATUS_PHY_NOT_PRESENT = 183, /* PHY module not present */
BFA_STATUS_FEATURE_NOT_SUPPORTED = 192, /* Feature not supported */
BFA_STATUS_ENTRY_EXISTS = 193, /* Entry already exists */
BFA_STATUS_ENTRY_NOT_EXISTS = 194, /* Entry does not exist */
BFA_STATUS_NO_CHANGE = 195, /* Feature already in that state */
BFA_STATUS_FAA_ENABLED = 197, /* FAA is already enabled */
BFA_STATUS_FAA_DISABLED = 198, /* FAA is already disabled */
BFA_STATUS_FAA_ACQUIRED = 199, /* FAA is already acquired */
BFA_STATUS_FAA_ACQ_ADDR = 200, /* Acquiring addr */
BFA_STATUS_BBCR_FC_ONLY = 201, /*!< BBCredit Recovery is supported for *
* FC mode only */
BFA_STATUS_ERROR_TRUNK_ENABLED = 203, /* Trunk enabled on adapter */
BFA_STATUS_MAX_ENTRY_REACHED = 212, /* MAX entry reached */
BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */
BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported
* on mezz cards */
BFA_STATUS_INVALID_BW = 233, /* Invalid bandwidth value */
BFA_STATUS_QOS_BW_INVALID = 234, /* Invalid QOS bandwidth
* configuration */
BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */
BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */
BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */
BFA_STATUS_FRU_NOT_PRESENT = 240, /* fru module not present */
BFA_STATUS_DPORT_NO_SFP = 243, /* SFP is not present.\n D-port will be
* enabled but it will be operational
* only after inserting a valid SFP. */
BFA_STATUS_DPORT_ERR = 245, /* D-port mode is enabled */
BFA_STATUS_DPORT_ENOSYS = 254, /* Switch has no D_Port functionality */
BFA_STATUS_DPORT_CANT_PERF = 255, /* Switch port is not D_Port capable
* or D_Port is disabled */
BFA_STATUS_DPORT_LOGICALERR = 256, /* Switch D_Port fail */
BFA_STATUS_DPORT_SWBUSY = 257, /* Switch port busy */
BFA_STATUS_ERR_BBCR_SPEED_UNSUPPORT = 258, /*!< BB credit recovery is
* supported at max port speed alone */
BFA_STATUS_ERROR_BBCR_ENABLED = 259, /*!< BB credit recovery
* is enabled */
BFA_STATUS_INVALID_BBSCN = 260, /*!< Invalid BBSCN value.
* Valid range is [1-15] */
BFA_STATUS_DDPORT_ERR = 261, /* Dynamic D_Port mode is active.\n To
* exit dynamic mode, disable D_Port on
* the remote port */
BFA_STATUS_DPORT_SFPWRAP_ERR = 262, /* Clear e/o_wrap fail, check or
* replace SFP */
BFA_STATUS_BBCR_CFG_NO_CHANGE = 265, /*!< BBCR is operational.
* Disable BBCR and try this operation again. */
BFA_STATUS_DPORT_SW_NOTREADY = 268, /* Remote port is not ready to
* start dport test. Check remote
* port status. */
BFA_STATUS_DPORT_INV_SFP = 271, /* Invalid SFP for D-PORT mode. */
BFA_STATUS_DPORT_CMD_NOTSUPP = 273, /* Dport is not supported by
* remote port */
BFA_STATUS_MAX_VAL /* Unknown error code */
};
#define bfa_status_t enum bfa_status
enum bfa_eproto_status {
BFA_EPROTO_BAD_ACCEPT = 0,
BFA_EPROTO_UNKNOWN_RSP = 1
};
#define bfa_eproto_status_t enum bfa_eproto_status
enum bfa_boolean {
BFA_FALSE = 0,
BFA_TRUE = 1
};
#define bfa_boolean_t enum bfa_boolean
#define BFA_STRING_32 32
#define BFA_VERSION_LEN 64
/*
* ---------------------- adapter definitions ------------
*/
/*
* BFA adapter level attributes.
*/
enum {
BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE),
/*
*!< adapter serial num length
*/
BFA_ADAPTER_MODEL_NAME_LEN = 16, /* model name length */
BFA_ADAPTER_MODEL_DESCR_LEN = 128, /* model description length */
BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */
BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */
BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */
BFA_ADAPTER_UUID_LEN = 16, /* adapter uuid length */
};
struct bfa_adapter_attr_s {
char manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
u32 card_type;
char model[BFA_ADAPTER_MODEL_NAME_LEN];
char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
wwn_t pwwn;
char node_symname[FC_SYMNAME_MAX];
char hw_ver[BFA_VERSION_LEN];
char fw_ver[BFA_VERSION_LEN];
char optrom_ver[BFA_VERSION_LEN];
char os_type[BFA_ADAPTER_OS_TYPE_LEN];
struct bfa_mfg_vpd_s vpd;
struct mac_s mac;
u8 nports;
u8 max_speed;
u8 prototype;
char asic_rev;
u8 pcie_gen;
u8 pcie_lanes_orig;
u8 pcie_lanes;
u8 cna_capable;
u8 is_mezz;
u8 trunk_capable;
u8 mfg_day; /* manufacturing day */
u8 mfg_month; /* manufacturing month */
u16 mfg_year; /* manufacturing year */
u16 rsvd;
u8 uuid[BFA_ADAPTER_UUID_LEN];
};
/*
* ---------------------- IOC definitions ------------
*/
enum {
BFA_IOC_DRIVER_LEN = 16,
BFA_IOC_CHIP_REV_LEN = 8,
};
/*
* Driver and firmware versions.
*/
struct bfa_ioc_driver_attr_s {
char driver[BFA_IOC_DRIVER_LEN]; /* driver name */
char driver_ver[BFA_VERSION_LEN]; /* driver version */
char fw_ver[BFA_VERSION_LEN]; /* firmware version */
char bios_ver[BFA_VERSION_LEN]; /* bios version */
char efi_ver[BFA_VERSION_LEN]; /* EFI version */
char ob_ver[BFA_VERSION_LEN]; /* openboot version */
};
/*
* IOC PCI device attributes
*/
struct bfa_ioc_pci_attr_s {
u16 vendor_id; /* PCI vendor ID */
u16 device_id; /* PCI device ID */
u16 ssid; /* subsystem ID */
u16 ssvid; /* subsystem vendor ID */
u32 pcifn; /* PCI device function */
u32 rsvd; /* padding */
char chip_rev[BFA_IOC_CHIP_REV_LEN]; /* chip revision */
};
/*
* IOC states
*/
enum bfa_ioc_state {
BFA_IOC_UNINIT = 1, /* IOC is in uninit state */
BFA_IOC_RESET = 2, /* IOC is in reset state */
BFA_IOC_SEMWAIT = 3, /* Waiting for IOC h/w semaphore */
BFA_IOC_HWINIT = 4, /* IOC h/w is being initialized */
BFA_IOC_GETATTR = 5, /* IOC is being configured */
BFA_IOC_OPERATIONAL = 6, /* IOC is operational */
BFA_IOC_INITFAIL = 7, /* IOC hardware failure */
BFA_IOC_FAIL = 8, /* IOC heart-beat failure */
BFA_IOC_DISABLING = 9, /* IOC is being disabled */
BFA_IOC_DISABLED = 10, /* IOC is disabled */
BFA_IOC_FWMISMATCH = 11, /* IOC f/w different from drivers */
BFA_IOC_ENABLING = 12, /* IOC is being enabled */
BFA_IOC_HWFAIL = 13, /* PCI mapping doesn't exist */
BFA_IOC_ACQ_ADDR = 14, /* Acquiring addr from fabric */
};
/*
* IOC firmware stats
*/
struct bfa_fw_ioc_stats_s {
u32 enable_reqs;
u32 disable_reqs;
u32 get_attr_reqs;
u32 dbg_sync;
u32 dbg_dump;
u32 unknown_reqs;
};
/*
* IOC driver stats
*/
struct bfa_ioc_drv_stats_s {
u32 ioc_isrs;
u32 ioc_enables;
u32 ioc_disables;
u32 ioc_hbfails;
u32 ioc_boots;
u32 stats_tmos;
u32 hb_count;
u32 disable_reqs;
u32 enable_reqs;
u32 disable_replies;
u32 enable_replies;
u32 rsvd;
};
/*
* IOC statistics
*/
struct bfa_ioc_stats_s {
struct bfa_ioc_drv_stats_s drv_stats; /* driver IOC stats */
struct bfa_fw_ioc_stats_s fw_stats; /* firmware IOC stats */
};
enum bfa_ioc_type_e {
BFA_IOC_TYPE_FC = 1,
BFA_IOC_TYPE_FCoE = 2,
BFA_IOC_TYPE_LL = 3,
};
/*
* IOC attributes returned in queries
*/
struct bfa_ioc_attr_s {
enum bfa_ioc_type_e ioc_type;
enum bfa_ioc_state state; /* IOC state */
struct bfa_adapter_attr_s adapter_attr; /* HBA attributes */
struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */
struct bfa_ioc_pci_attr_s pci_attr;
u8 port_id; /* port number */
u8 port_mode; /* bfa_mode_s */
u8 cap_bm; /* capability */
u8 port_mode_cfg; /* bfa_mode_s */
u8 def_fn; /* 1 if default fn */
u8 rsvd[3]; /* 64bit align */
};
/*
* AEN related definitions
*/
enum bfa_aen_category {
BFA_AEN_CAT_ADAPTER = 1,
BFA_AEN_CAT_PORT = 2,
BFA_AEN_CAT_LPORT = 3,
BFA_AEN_CAT_RPORT = 4,
BFA_AEN_CAT_ITNIM = 5,
BFA_AEN_CAT_AUDIT = 8,
BFA_AEN_CAT_IOC = 9,
};
/* BFA adapter level events */
enum bfa_adapter_aen_event {
BFA_ADAPTER_AEN_ADD = 1, /* New Adapter found event */
BFA_ADAPTER_AEN_REMOVE = 2, /* Adapter removed event */
};
struct bfa_adapter_aen_data_s {
char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
u32 nports; /* Number of NPorts */
wwn_t pwwn; /* WWN of one of its physical port */
};
/* BFA physical port Level events */
enum bfa_port_aen_event {
BFA_PORT_AEN_ONLINE = 1, /* Physical Port online event */
BFA_PORT_AEN_OFFLINE = 2, /* Physical Port offline event */
BFA_PORT_AEN_RLIR = 3, /* RLIR event, not supported */
BFA_PORT_AEN_SFP_INSERT = 4, /* SFP inserted event */
BFA_PORT_AEN_SFP_REMOVE = 5, /* SFP removed event */
BFA_PORT_AEN_SFP_POM = 6, /* SFP POM event */
BFA_PORT_AEN_ENABLE = 7, /* Physical Port enable event */
BFA_PORT_AEN_DISABLE = 8, /* Physical Port disable event */
BFA_PORT_AEN_AUTH_ON = 9, /* Physical Port auth success event */
BFA_PORT_AEN_AUTH_OFF = 10, /* Physical Port auth fail event */
BFA_PORT_AEN_DISCONNECT = 11, /* Physical Port disconnect event */
BFA_PORT_AEN_QOS_NEG = 12, /* Base Port QOS negotiation event */
BFA_PORT_AEN_FABRIC_NAME_CHANGE = 13, /* Fabric Name/WWN change */
BFA_PORT_AEN_SFP_ACCESS_ERROR = 14, /* SFP read error event */
BFA_PORT_AEN_SFP_UNSUPPORT = 15, /* Unsupported SFP event */
};
enum bfa_port_aen_sfp_pom {
BFA_PORT_AEN_SFP_POM_GREEN = 1, /* Normal */
BFA_PORT_AEN_SFP_POM_AMBER = 2, /* Warning */
BFA_PORT_AEN_SFP_POM_RED = 3, /* Critical */
BFA_PORT_AEN_SFP_POM_MAX = BFA_PORT_AEN_SFP_POM_RED
};
struct bfa_port_aen_data_s {
wwn_t pwwn; /* WWN of the physical port */
wwn_t fwwn; /* WWN of the fabric port */
u32 phy_port_num; /* For SFP related events */
u16 ioc_type;
u16 level; /* Only transitions will be informed */
mac_t mac; /* MAC address of the ethernet port */
u16 rsvd;
};
/* BFA AEN logical port events */
enum bfa_lport_aen_event {
BFA_LPORT_AEN_NEW = 1, /* LPort created event */
BFA_LPORT_AEN_DELETE = 2, /* LPort deleted event */
BFA_LPORT_AEN_ONLINE = 3, /* LPort online event */
BFA_LPORT_AEN_OFFLINE = 4, /* LPort offline event */
BFA_LPORT_AEN_DISCONNECT = 5, /* LPort disconnect event */
BFA_LPORT_AEN_NEW_PROP = 6, /* VPort created event */
BFA_LPORT_AEN_DELETE_PROP = 7, /* VPort deleted event */
BFA_LPORT_AEN_NEW_STANDARD = 8, /* VPort created event */
BFA_LPORT_AEN_DELETE_STANDARD = 9, /* VPort deleted event */
BFA_LPORT_AEN_NPIV_DUP_WWN = 10, /* VPort with duplicate WWN */
BFA_LPORT_AEN_NPIV_FABRIC_MAX = 11, /* Max NPIV in fabric/fport */
BFA_LPORT_AEN_NPIV_UNKNOWN = 12, /* Unknown NPIV Error code */
};
struct bfa_lport_aen_data_s {
u16 vf_id; /* vf_id of this logical port */
u16 roles; /* Logical port mode,IM/TM/IP etc */
u32 rsvd;
wwn_t ppwwn; /* WWN of its physical port */
wwn_t lpwwn; /* WWN of this logical port */
};
/* BFA ITNIM events */
enum bfa_itnim_aen_event {
BFA_ITNIM_AEN_ONLINE = 1, /* Target online */
BFA_ITNIM_AEN_OFFLINE = 2, /* Target offline */
BFA_ITNIM_AEN_DISCONNECT = 3, /* Target disconnected */
};
struct bfa_itnim_aen_data_s {
u16 vf_id; /* vf_id of the IT nexus */
u16 rsvd[3];
wwn_t ppwwn; /* WWN of its physical port */
wwn_t lpwwn; /* WWN of logical port */
wwn_t rpwwn; /* WWN of remote(target) port */
};
/* BFA audit events */
enum bfa_audit_aen_event {
BFA_AUDIT_AEN_AUTH_ENABLE = 1,
BFA_AUDIT_AEN_AUTH_DISABLE = 2,
BFA_AUDIT_AEN_FLASH_ERASE = 3,
BFA_AUDIT_AEN_FLASH_UPDATE = 4,
};
struct bfa_audit_aen_data_s {
wwn_t pwwn;
int partition_inst;
int partition_type;
};
/* BFA IOC level events */
enum bfa_ioc_aen_event {
BFA_IOC_AEN_HBGOOD = 1, /* Heart Beat restore event */
BFA_IOC_AEN_HBFAIL = 2, /* Heart Beat failure event */
BFA_IOC_AEN_ENABLE = 3, /* IOC enabled event */
BFA_IOC_AEN_DISABLE = 4, /* IOC disabled event */
BFA_IOC_AEN_FWMISMATCH = 5, /* IOC firmware mismatch */
BFA_IOC_AEN_FWCFG_ERROR = 6, /* IOC firmware config error */
BFA_IOC_AEN_INVALID_VENDOR = 7,
BFA_IOC_AEN_INVALID_NWWN = 8, /* Zero NWWN */
BFA_IOC_AEN_INVALID_PWWN = 9 /* Zero PWWN */
};
struct bfa_ioc_aen_data_s {
wwn_t pwwn;
u16 ioc_type;
mac_t mac;
};
/*
* ---------------------- mfg definitions ------------
*/
/*
* Checksum size
*/
#define BFA_MFG_CHKSUM_SIZE 16
#define BFA_MFG_PARTNUM_SIZE 14
#define BFA_MFG_SUPPLIER_ID_SIZE 10
#define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20
#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20
#define BFA_MFG_SUPPLIER_REVISION_SIZE 4
/*
* Initial capability definition
*/
#define BFA_MFG_IC_FC 0x01
#define BFA_MFG_IC_ETH 0x02
/*
* Adapter capability mask definition
*/
#define BFA_CM_HBA 0x01
#define BFA_CM_CNA 0x02
#define BFA_CM_NIC 0x04
#define BFA_CM_FC16G 0x08
#define BFA_CM_SRIOV 0x10
#define BFA_CM_MEZZ 0x20
#pragma pack(1)
/*
* All numerical fields are in big-endian format.
*/
struct bfa_mfg_block_s {
u8 version; /*!< manufacturing block version */
u8 mfg_sig[3]; /*!< characters 'M', 'F', 'G' */
u16 mfgsize; /*!< mfg block size */
u16 u16_chksum; /*!< old u16 checksum */
char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
char brcd_partnum[STRSZ(BFA_MFG_PARTNUM_SIZE)];
u8 mfg_day; /*!< manufacturing day */
u8 mfg_month; /*!< manufacturing month */
u16 mfg_year; /*!< manufacturing year */
wwn_t mfg_wwn; /*!< wwn base for this adapter */
u8 num_wwn; /*!< number of wwns assigned */
u8 mfg_speeds; /*!< speeds allowed for this adapter */
u8 rsv[2];
char supplier_id[STRSZ(BFA_MFG_SUPPLIER_ID_SIZE)];
char supplier_partnum[STRSZ(BFA_MFG_SUPPLIER_PARTNUM_SIZE)];
char supplier_serialnum[STRSZ(BFA_MFG_SUPPLIER_SERIALNUM_SIZE)];
char supplier_revision[STRSZ(BFA_MFG_SUPPLIER_REVISION_SIZE)];
mac_t mfg_mac; /*!< base mac address */
u8 num_mac; /*!< number of mac addresses */
u8 rsv2;
u32 card_type; /*!< card type */
char cap_nic; /*!< capability nic */
char cap_cna; /*!< capability cna */
char cap_hba; /*!< capability hba */
char cap_fc16g; /*!< capability fc 16g */
char cap_sriov; /*!< capability sriov */
char cap_mezz; /*!< capability mezz */
u8 rsv3;
u8 mfg_nports; /*!< number of ports */
char media[8]; /*!< xfi/xaui */
char initial_mode[8]; /*!< initial mode: hba/cna/nic */
u8 rsv4[84];
u8 md5_chksum[BFA_MFG_CHKSUM_SIZE]; /*!< md5 checksum */
};
#pragma pack()
/*
* ---------------------- pci definitions ------------
*/
/*
* PCI device and vendor ID information
*/
enum {
BFA_PCI_VENDOR_ID_BROCADE = 0x1657,
BFA_PCI_DEVICE_ID_FC_8G2P = 0x13,
BFA_PCI_DEVICE_ID_FC_8G1P = 0x17,
BFA_PCI_DEVICE_ID_CT = 0x14,
BFA_PCI_DEVICE_ID_CT_FC = 0x21,
BFA_PCI_DEVICE_ID_CT2 = 0x22,
BFA_PCI_DEVICE_ID_CT2_QUAD = 0x23,
};
#define bfa_asic_id_cb(__d) \
((__d) == BFA_PCI_DEVICE_ID_FC_8G2P || \
(__d) == BFA_PCI_DEVICE_ID_FC_8G1P)
#define bfa_asic_id_ct(__d) \
((__d) == BFA_PCI_DEVICE_ID_CT || \
(__d) == BFA_PCI_DEVICE_ID_CT_FC)
#define bfa_asic_id_ct2(__d) \
((__d) == BFA_PCI_DEVICE_ID_CT2 || \
(__d) == BFA_PCI_DEVICE_ID_CT2_QUAD)
#define bfa_asic_id_ctc(__d) \
(bfa_asic_id_ct(__d) || bfa_asic_id_ct2(__d))
/*
* PCI sub-system device and vendor ID information
*/
enum {
BFA_PCI_FCOE_SSDEVICE_ID = 0x14,
BFA_PCI_CT2_SSID_FCoE = 0x22,
BFA_PCI_CT2_SSID_ETH = 0x23,
BFA_PCI_CT2_SSID_FC = 0x24,
};
/*
* Maximum number of device address ranges mapped through different BAR(s)
*/
#define BFA_PCI_ACCESS_RANGES 1
/*
* Port speed settings. Each specific speed is a bit field. Use multiple
* bits to specify speeds to be selected for auto-negotiation.
*/
enum bfa_port_speed {
BFA_PORT_SPEED_UNKNOWN = 0,
BFA_PORT_SPEED_1GBPS = 1,
BFA_PORT_SPEED_2GBPS = 2,
BFA_PORT_SPEED_4GBPS = 4,
BFA_PORT_SPEED_8GBPS = 8,
BFA_PORT_SPEED_10GBPS = 10,
BFA_PORT_SPEED_16GBPS = 16,
BFA_PORT_SPEED_AUTO = 0xf,
};
#define bfa_port_speed_t enum bfa_port_speed
enum {
BFA_BOOT_BOOTLUN_MAX = 4, /* maximum boot lun per IOC */
BFA_PREBOOT_BOOTLUN_MAX = 8, /* maximum preboot lun per IOC */
};
#define BOOT_CFG_REV1 1
#define BOOT_CFG_VLAN 1
/*
* Boot options setting. Boot options setting determines from where
* to get the boot lun information
*/
enum bfa_boot_bootopt {
BFA_BOOT_AUTO_DISCOVER = 0, /* Boot from blun provided by fabric */
BFA_BOOT_STORED_BLUN = 1, /* Boot from bluns stored in flash */
BFA_BOOT_FIRST_LUN = 2, /* Boot from first discovered blun */
BFA_BOOT_PBC = 3, /* Boot from pbc configured blun */
};
#pragma pack(1)
/*
* Boot lun information.
*/
struct bfa_boot_bootlun_s {
wwn_t pwwn; /* port wwn of target */
struct scsi_lun lun; /* 64-bit lun */
};
#pragma pack()
/*
* BOOT boot configuraton
*/
struct bfa_boot_cfg_s {
u8 version;
u8 rsvd1;
u16 chksum;
u8 enable; /* enable/disable SAN boot */
u8 speed; /* boot speed settings */
u8 topology; /* boot topology setting */
u8 bootopt; /* bfa_boot_bootopt_t */
u32 nbluns; /* number of boot luns */
u32 rsvd2;
struct bfa_boot_bootlun_s blun[BFA_BOOT_BOOTLUN_MAX];
struct bfa_boot_bootlun_s blun_disc[BFA_BOOT_BOOTLUN_MAX];
};
struct bfa_boot_pbc_s {
u8 enable; /* enable/disable SAN boot */
u8 speed; /* boot speed settings */
u8 topology; /* boot topology setting */
u8 rsvd1;
u32 nbluns; /* number of boot luns */
struct bfa_boot_bootlun_s pblun[BFA_PREBOOT_BOOTLUN_MAX];
};
struct bfa_ethboot_cfg_s {
u8 version;
u8 rsvd1;
u16 chksum;
u8 enable; /* enable/disable Eth/PXE boot */
u8 rsvd2;
u16 vlan;
};
/*
* ASIC block configuration related structures
*/
#define BFA_ABLK_MAX_PORTS 2
#define BFA_ABLK_MAX_PFS 16
#define BFA_ABLK_MAX 2
#pragma pack(1)
enum bfa_mode_s {
BFA_MODE_HBA = 1,
BFA_MODE_CNA = 2,
BFA_MODE_NIC = 3
};
struct bfa_adapter_cfg_mode_s {
u16 max_pf;
u16 max_vf;
enum bfa_mode_s mode;
};
struct bfa_ablk_cfg_pf_s {
u16 pers;
u8 port_id;
u8 optrom;
u8 valid;
u8 sriov;
u8 max_vfs;
u8 rsvd[1];
u16 num_qpairs;
u16 num_vectors;
u16 bw_min;
u16 bw_max;
};
struct bfa_ablk_cfg_port_s {
u8 mode;
u8 type;
u8 max_pfs;
u8 rsvd[5];
};
struct bfa_ablk_cfg_inst_s {
u8 nports;
u8 max_pfs;
u8 rsvd[6];
struct bfa_ablk_cfg_pf_s pf_cfg[BFA_ABLK_MAX_PFS];
struct bfa_ablk_cfg_port_s port_cfg[BFA_ABLK_MAX_PORTS];
};
struct bfa_ablk_cfg_s {
struct bfa_ablk_cfg_inst_s inst[BFA_ABLK_MAX];
};
/*
* SFP module specific
*/
#define SFP_DIAGMON_SIZE 10 /* num bytes of diag monitor data */
/* SFP state change notification event */
#define BFA_SFP_SCN_REMOVED 0
#define BFA_SFP_SCN_INSERTED 1
#define BFA_SFP_SCN_POM 2
#define BFA_SFP_SCN_FAILED 3
#define BFA_SFP_SCN_UNSUPPORT 4
#define BFA_SFP_SCN_VALID 5
enum bfa_defs_sfp_media_e {
BFA_SFP_MEDIA_UNKNOWN = 0x00,
BFA_SFP_MEDIA_CU = 0x01,
BFA_SFP_MEDIA_LW = 0x02,
BFA_SFP_MEDIA_SW = 0x03,
BFA_SFP_MEDIA_EL = 0x04,
BFA_SFP_MEDIA_UNSUPPORT = 0x05,
};
/*
* values for xmtr_tech above
*/
enum {
SFP_XMTR_TECH_CU = (1 << 0), /* copper FC-BaseT */
SFP_XMTR_TECH_CP = (1 << 1), /* copper passive */
SFP_XMTR_TECH_CA = (1 << 2), /* copper active */
SFP_XMTR_TECH_LL = (1 << 3), /* longwave laser */
SFP_XMTR_TECH_SL = (1 << 4), /* shortwave laser w/ OFC */
SFP_XMTR_TECH_SN = (1 << 5), /* shortwave laser w/o OFC */
SFP_XMTR_TECH_EL_INTRA = (1 << 6), /* elec intra-enclosure */
SFP_XMTR_TECH_EL_INTER = (1 << 7), /* elec inter-enclosure */
SFP_XMTR_TECH_LC = (1 << 8), /* longwave laser */
SFP_XMTR_TECH_SA = (1 << 9)
};
/*
* Serial ID: Data Fields -- Address A0h
* Basic ID field total 64 bytes
*/
struct sfp_srlid_base_s {
u8 id; /* 00: Identifier */
u8 extid; /* 01: Extended Identifier */
u8 connector; /* 02: Connector */
u8 xcvr[8]; /* 03-10: Transceiver */
u8 encoding; /* 11: Encoding */
u8 br_norm; /* 12: BR, Nominal */
u8 rate_id; /* 13: Rate Identifier */
u8 len_km; /* 14: Length single mode km */
u8 len_100m; /* 15: Length single mode 100m */
u8 len_om2; /* 16: Length om2 fiber 10m */
u8 len_om1; /* 17: Length om1 fiber 10m */
u8 len_cu; /* 18: Length copper 1m */
u8 len_om3; /* 19: Length om3 fiber 10m */
u8 vendor_name[16];/* 20-35 */
u8 unalloc1;
u8 vendor_oui[3]; /* 37-39 */
u8 vendor_pn[16]; /* 40-55 */
u8 vendor_rev[4]; /* 56-59 */
u8 wavelen[2]; /* 60-61 */
u8 unalloc2;
u8 cc_base; /* 63: check code for base id field */
};
/*
* Serial ID: Data Fields -- Address A0h
* Extended id field total 32 bytes
*/
struct sfp_srlid_ext_s {
u8 options[2];
u8 br_max;
u8 br_min;
u8 vendor_sn[16];
u8 date_code[8];
u8 diag_mon_type; /* 92: Diagnostic Monitoring type */
u8 en_options;
u8 sff_8472;
u8 cc_ext;
};
/*
* Diagnostic: Data Fields -- Address A2h
* Diagnostic and control/status base field total 96 bytes
*/
struct sfp_diag_base_s {
/*
* Alarm and warning Thresholds 40 bytes
*/
u8 temp_high_alarm[2]; /* 00-01 */
u8 temp_low_alarm[2]; /* 02-03 */
u8 temp_high_warning[2]; /* 04-05 */
u8 temp_low_warning[2]; /* 06-07 */
u8 volt_high_alarm[2]; /* 08-09 */
u8 volt_low_alarm[2]; /* 10-11 */
u8 volt_high_warning[2]; /* 12-13 */
u8 volt_low_warning[2]; /* 14-15 */
u8 bias_high_alarm[2]; /* 16-17 */
u8 bias_low_alarm[2]; /* 18-19 */
u8 bias_high_warning[2]; /* 20-21 */
u8 bias_low_warning[2]; /* 22-23 */
u8 tx_pwr_high_alarm[2]; /* 24-25 */
u8 tx_pwr_low_alarm[2]; /* 26-27 */
u8 tx_pwr_high_warning[2]; /* 28-29 */
u8 tx_pwr_low_warning[2]; /* 30-31 */
u8 rx_pwr_high_alarm[2]; /* 32-33 */
u8 rx_pwr_low_alarm[2]; /* 34-35 */
u8 rx_pwr_high_warning[2]; /* 36-37 */
u8 rx_pwr_low_warning[2]; /* 38-39 */
u8 unallocate_1[16];
/*
* ext_cal_const[36]
*/
u8 rx_pwr[20];
u8 tx_i[4];
u8 tx_pwr[4];
u8 temp[4];
u8 volt[4];
u8 unallocate_2[3];
u8 cc_dmi;
};
/*
* Diagnostic: Data Fields -- Address A2h
* Diagnostic and control/status extended field total 24 bytes
*/
struct sfp_diag_ext_s {
u8 diag[SFP_DIAGMON_SIZE];
u8 unalloc1[4];
u8 status_ctl;
u8 rsvd;
u8 alarm_flags[2];
u8 unalloc2[2];
u8 warning_flags[2];
u8 ext_status_ctl[2];
};
/*
* Diagnostic: Data Fields -- Address A2h
* General Use Fields: User Writable Table - Features's Control Registers
* Total 32 bytes
*/
struct sfp_usr_eeprom_s {
u8 rsvd1[2]; /* 128-129 */
u8 ewrap; /* 130 */
u8 rsvd2[2]; /* */
u8 owrap; /* 133 */
u8 rsvd3[2]; /* */
u8 prbs; /* 136: PRBS 7 generator */
u8 rsvd4[2]; /* */
u8 tx_eqz_16; /* 139: TX Equalizer (16xFC) */
u8 tx_eqz_8; /* 140: TX Equalizer (8xFC) */
u8 rsvd5[2]; /* */
u8 rx_emp_16; /* 143: RX Emphasis (16xFC) */
u8 rx_emp_8; /* 144: RX Emphasis (8xFC) */
u8 rsvd6[2]; /* */
u8 tx_eye_adj; /* 147: TX eye Threshold Adjust */
u8 rsvd7[3]; /* */
u8 tx_eye_qctl; /* 151: TX eye Quality Control */
u8 tx_eye_qres; /* 152: TX eye Quality Result */
u8 rsvd8[2]; /* */
u8 poh[3]; /* 155-157: Power On Hours */
u8 rsvd9[2]; /* */
};
struct sfp_mem_s {
struct sfp_srlid_base_s srlid_base;
struct sfp_srlid_ext_s srlid_ext;
struct sfp_diag_base_s diag_base;
struct sfp_diag_ext_s diag_ext;
struct sfp_usr_eeprom_s usr_eeprom;
};
/*
* transceiver codes (SFF-8472 Rev 10.2 Table 3.5)
*/
union sfp_xcvr_e10g_code_u {
u8 b;
struct {
#ifdef __BIG_ENDIAN
u8 e10g_unall:1; /* 10G Ethernet compliance */
u8 e10g_lrm:1;
u8 e10g_lr:1;
u8 e10g_sr:1;
u8 ib_sx:1; /* Infiniband compliance */
u8 ib_lx:1;
u8 ib_cu_a:1;
u8 ib_cu_p:1;
#else
u8 ib_cu_p:1;
u8 ib_cu_a:1;
u8 ib_lx:1;
u8 ib_sx:1; /* Infiniband compliance */
u8 e10g_sr:1;
u8 e10g_lr:1;
u8 e10g_lrm:1;
u8 e10g_unall:1; /* 10G Ethernet compliance */
#endif
} r;
};
union sfp_xcvr_so1_code_u {
u8 b;
struct {
u8 escon:2; /* ESCON compliance code */
u8 oc192_reach:1; /* SONET compliance code */
u8 so_reach:2;
u8 oc48_reach:3;
} r;
};
union sfp_xcvr_so2_code_u {
u8 b;
struct {
u8 reserved:1;
u8 oc12_reach:3; /* OC12 reach */
u8 reserved1:1;
u8 oc3_reach:3; /* OC3 reach */
} r;
};
union sfp_xcvr_eth_code_u {
u8 b;
struct {
u8 base_px:1;
u8 base_bx10:1;
u8 e100base_fx:1;
u8 e100base_lx:1;
u8 e1000base_t:1;
u8 e1000base_cx:1;
u8 e1000base_lx:1;
u8 e1000base_sx:1;
} r;
};
struct sfp_xcvr_fc1_code_s {
u8 link_len:5; /* FC link length */
u8 xmtr_tech2:3;
u8 xmtr_tech1:7; /* FC transmitter technology */
u8 reserved1:1;
};
union sfp_xcvr_fc2_code_u {
u8 b;
struct {
u8 tw_media:1; /* twin axial pair (tw) */
u8 tp_media:1; /* shielded twisted pair (sp) */
u8 mi_media:1; /* miniature coax (mi) */
u8 tv_media:1; /* video coax (tv) */
u8 m6_media:1; /* multimode, 62.5m (m6) */
u8 m5_media:1; /* multimode, 50m (m5) */
u8 reserved:1;
u8 sm_media:1; /* single mode (sm) */
} r;
};
union sfp_xcvr_fc3_code_u {
u8 b;
struct {
#ifdef __BIG_ENDIAN
u8 rsv4:1;
u8 mb800:1; /* 800 Mbytes/sec */
u8 mb1600:1; /* 1600 Mbytes/sec */
u8 mb400:1; /* 400 Mbytes/sec */
u8 rsv2:1;
u8 mb200:1; /* 200 Mbytes/sec */
u8 rsv1:1;
u8 mb100:1; /* 100 Mbytes/sec */
#else
u8 mb100:1; /* 100 Mbytes/sec */
u8 rsv1:1;
u8 mb200:1; /* 200 Mbytes/sec */
u8 rsv2:1;
u8 mb400:1; /* 400 Mbytes/sec */
u8 mb1600:1; /* 1600 Mbytes/sec */
u8 mb800:1; /* 800 Mbytes/sec */
u8 rsv4:1;
#endif
} r;
};
struct sfp_xcvr_s {
union sfp_xcvr_e10g_code_u e10g;
union sfp_xcvr_so1_code_u so1;
union sfp_xcvr_so2_code_u so2;
union sfp_xcvr_eth_code_u eth;
struct sfp_xcvr_fc1_code_s fc1;
union sfp_xcvr_fc2_code_u fc2;
union sfp_xcvr_fc3_code_u fc3;
};
/*
* Flash module specific
*/
#define BFA_FLASH_PART_ENTRY_SIZE 32 /* partition entry size */
#define BFA_FLASH_PART_MAX 32 /* maximal # of partitions */
enum bfa_flash_part_type {
BFA_FLASH_PART_OPTROM = 1, /* option rom partition */
BFA_FLASH_PART_FWIMG = 2, /* firmware image partition */
BFA_FLASH_PART_FWCFG = 3, /* firmware tuneable config */
BFA_FLASH_PART_DRV = 4, /* IOC driver config */
BFA_FLASH_PART_BOOT = 5, /* boot config */
BFA_FLASH_PART_ASIC = 6, /* asic bootstrap configuration */
BFA_FLASH_PART_MFG = 7, /* manufacturing block partition */
BFA_FLASH_PART_OPTROM2 = 8, /* 2nd option rom partition */
BFA_FLASH_PART_VPD = 9, /* vpd data of OEM info */
BFA_FLASH_PART_PBC = 10, /* pre-boot config */
BFA_FLASH_PART_BOOTOVL = 11, /* boot overlay partition */
BFA_FLASH_PART_LOG = 12, /* firmware log partition */
BFA_FLASH_PART_PXECFG = 13, /* pxe boot config partition */
BFA_FLASH_PART_PXEOVL = 14, /* pxe boot overlay partition */
BFA_FLASH_PART_PORTCFG = 15, /* port cfg partition */
BFA_FLASH_PART_ASICBK = 16, /* asic backup partition */
};
/*
* flash partition attributes
*/
struct bfa_flash_part_attr_s {
u32 part_type; /* partition type */
u32 part_instance; /* partition instance */
u32 part_off; /* partition offset */
u32 part_size; /* partition size */
u32 part_len; /* partition content length */
u32 part_status; /* partition status */
char rsv[BFA_FLASH_PART_ENTRY_SIZE - 24];
};
/*
* flash attributes
*/
struct bfa_flash_attr_s {
u32 status; /* flash overall status */
u32 npart; /* num of partitions */
struct bfa_flash_part_attr_s part[BFA_FLASH_PART_MAX];
};
/*
* DIAG module specific
*/
#define LB_PATTERN_DEFAULT 0xB5B5B5B5
#define QTEST_CNT_DEFAULT 10
#define QTEST_PAT_DEFAULT LB_PATTERN_DEFAULT
#define DPORT_ENABLE_LOOPCNT_DEFAULT (1024 * 1024)
struct bfa_diag_memtest_s {
u8 algo;
u8 rsvd[7];
};
struct bfa_diag_memtest_result {
u32 status;
u32 addr;
u32 exp; /* expect value read from reg */
u32 act; /* actually value read */
u32 err_status; /* error status reg */
u32 err_status1; /* extra error info reg */
u32 err_addr; /* error address reg */
u8 algo;
u8 rsv[3];
};
struct bfa_diag_loopback_result_s {
u32 numtxmfrm; /* no. of transmit frame */
u32 numosffrm; /* no. of outstanding frame */
u32 numrcvfrm; /* no. of received good frame */
u32 badfrminf; /* mis-match info */
u32 badfrmnum; /* mis-match fram number */
u8 status; /* loopback test result */
u8 rsvd[3];
};
enum bfa_diag_dport_test_status {
DPORT_TEST_ST_IDLE = 0, /* the test has not started yet. */
DPORT_TEST_ST_FINAL = 1, /* the test done successfully */
DPORT_TEST_ST_SKIP = 2, /* the test skipped */
DPORT_TEST_ST_FAIL = 3, /* the test failed */
DPORT_TEST_ST_INPRG = 4, /* the testing is in progress */
DPORT_TEST_ST_RESPONDER = 5, /* test triggered from remote port */
DPORT_TEST_ST_STOPPED = 6, /* the test stopped by user. */
DPORT_TEST_ST_MAX
};
enum bfa_diag_dport_test_type {
DPORT_TEST_ELOOP = 0,
DPORT_TEST_OLOOP = 1,
DPORT_TEST_ROLOOP = 2,
DPORT_TEST_LINK = 3,
DPORT_TEST_MAX
};
enum bfa_diag_dport_test_opmode {
BFA_DPORT_OPMODE_AUTO = 0,
BFA_DPORT_OPMODE_MANU = 1,
};
struct bfa_diag_dport_subtest_result_s {
u8 status; /* bfa_diag_dport_test_status */
u8 rsvd[7]; /* 64bit align */
u64 start_time; /* timestamp */
};
struct bfa_diag_dport_result_s {
wwn_t rp_pwwn; /* switch port wwn */
wwn_t rp_nwwn; /* switch node wwn */
u64 start_time; /* user/sw start time */
u64 end_time; /* timestamp */
u8 status; /* bfa_diag_dport_test_status */
u8 mode; /* bfa_diag_dport_test_opmode */
u8 rsvd; /* 64bit align */
u8 speed; /* link speed for buf_reqd */
u16 buffer_required;
u16 frmsz; /* frame size for buf_reqd */
u32 lpcnt; /* Frame count */
u32 pat; /* Pattern */
u32 roundtrip_latency; /* in nano sec */
u32 est_cable_distance; /* in meter */
struct bfa_diag_dport_subtest_result_s subtest[DPORT_TEST_MAX];
};
struct bfa_diag_ledtest_s {
u32 cmd; /* bfa_led_op_t */
u32 color; /* bfa_led_color_t */
u16 freq; /* no. of blinks every 10 secs */
u8 led; /* bitmap of LEDs to be tested */
u8 rsvd[5];
};
struct bfa_diag_loopback_s {
u32 loopcnt;
u32 pattern;
u8 lb_mode; /* bfa_port_opmode_t */
u8 speed; /* bfa_port_speed_t */
u8 rsvd[2];
};
/*
* PHY module specific
*/
enum bfa_phy_status_e {
BFA_PHY_STATUS_GOOD = 0, /* phy is good */
BFA_PHY_STATUS_NOT_PRESENT = 1, /* phy does not exist */
BFA_PHY_STATUS_BAD = 2, /* phy is bad */
};
/*
* phy attributes for phy query
*/
struct bfa_phy_attr_s {
u32 status; /* phy present/absent status */
u32 length; /* firmware length */
u32 fw_ver; /* firmware version */
u32 an_status; /* AN status */
u32 pma_pmd_status; /* PMA/PMD link status */
u32 pma_pmd_signal; /* PMA/PMD signal detect */
u32 pcs_status; /* PCS link status */
};
/*
* phy stats
*/
struct bfa_phy_stats_s {
u32 status; /* phy stats status */
u32 link_breaks; /* Num of link breaks after linkup */
u32 pma_pmd_fault; /* NPMA/PMD fault */
u32 pcs_fault; /* PCS fault */
u32 speed_neg; /* Num of speed negotiation */
u32 tx_eq_training; /* Num of TX EQ training */
u32 tx_eq_timeout; /* Num of TX EQ timeout */
u32 crc_error; /* Num of CRC errors */
};
#pragma pack()
#endif /* __BFA_DEFS_H__ */
Reference in New Issue View Git Blame Copy Permalink