mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 21:14:44 +08:00
74d6b3ceaa
Fixed suspend/resume paths for TPM 2.0 and consolidated all the associated code to the tpm_pm_suspend() and tpm_pm_resume() functions. Resume path should be handled by the firmware, i.e. Startup(CLEAR) for hibernate and Startup(STATE) for suspend. There might be some non-PC embedded devices in the future where Startup() is not the handled by the FW but fixing the code for those IMHO should be postponed until there is hardware available to test the fixes although extra Startup in the driver code is essentially a NOP. Added Shutdown(CLEAR) to the remove paths of TIS and CRB drivers. Changed tpm2_shutdown() to a void function because there isn't much you can do except print an error message if this fails with a system error. Fixes:aec04cbdf7
("tpm: TPM 2.0 FIFO Interface") Fixes:30fc8d138e
("tpm: TPM 2.0 CRB Interface") [phuewe: both did send TPM_Shutdown on resume which 'disables' the TPM and did not send TPM2_Shutdown on teardown which leads some TPM2.0 to believe there was an attack (no TPM2_Shutdown = no orderly shutdown = attack)] Reported-by: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
345 lines
7.7 KiB
C
345 lines
7.7 KiB
C
/*
|
|
* Copyright (C) 2014 Intel Corporation
|
|
*
|
|
* Authors:
|
|
* Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
*
|
|
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
|
|
*
|
|
* This device driver implements the TPM interface as defined in
|
|
* the TCG CRB 2.0 TPM specification.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; version 2
|
|
* of the License.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/rculist.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include "tpm.h"
|
|
|
|
#define ACPI_SIG_TPM2 "TPM2"
|
|
|
|
static const u8 CRB_ACPI_START_UUID[] = {
|
|
/* 0000 */ 0xAB, 0x6C, 0xBF, 0x6B, 0x63, 0x54, 0x14, 0x47,
|
|
/* 0008 */ 0xB7, 0xCD, 0xF0, 0x20, 0x3C, 0x03, 0x68, 0xD4
|
|
};
|
|
|
|
enum crb_defaults {
|
|
CRB_ACPI_START_REVISION_ID = 1,
|
|
CRB_ACPI_START_INDEX = 1,
|
|
};
|
|
|
|
enum crb_start_method {
|
|
CRB_SM_ACPI_START = 2,
|
|
CRB_SM_CRB = 7,
|
|
CRB_SM_CRB_WITH_ACPI_START = 8,
|
|
};
|
|
|
|
struct acpi_tpm2 {
|
|
struct acpi_table_header hdr;
|
|
u16 platform_class;
|
|
u16 reserved;
|
|
u64 control_area_pa;
|
|
u32 start_method;
|
|
} __packed;
|
|
|
|
enum crb_ca_request {
|
|
CRB_CA_REQ_GO_IDLE = BIT(0),
|
|
CRB_CA_REQ_CMD_READY = BIT(1),
|
|
};
|
|
|
|
enum crb_ca_status {
|
|
CRB_CA_STS_ERROR = BIT(0),
|
|
CRB_CA_STS_TPM_IDLE = BIT(1),
|
|
};
|
|
|
|
enum crb_start {
|
|
CRB_START_INVOKE = BIT(0),
|
|
};
|
|
|
|
enum crb_cancel {
|
|
CRB_CANCEL_INVOKE = BIT(0),
|
|
};
|
|
|
|
struct crb_control_area {
|
|
u32 req;
|
|
u32 sts;
|
|
u32 cancel;
|
|
u32 start;
|
|
u32 int_enable;
|
|
u32 int_sts;
|
|
u32 cmd_size;
|
|
u64 cmd_pa;
|
|
u32 rsp_size;
|
|
u64 rsp_pa;
|
|
} __packed;
|
|
|
|
enum crb_status {
|
|
CRB_STS_COMPLETE = BIT(0),
|
|
};
|
|
|
|
enum crb_flags {
|
|
CRB_FL_ACPI_START = BIT(0),
|
|
CRB_FL_CRB_START = BIT(1),
|
|
};
|
|
|
|
struct crb_priv {
|
|
unsigned int flags;
|
|
struct crb_control_area __iomem *cca;
|
|
u8 __iomem *cmd;
|
|
u8 __iomem *rsp;
|
|
};
|
|
|
|
static SIMPLE_DEV_PM_OPS(crb_pm, tpm_pm_suspend, tpm_pm_resume);
|
|
|
|
static u8 crb_status(struct tpm_chip *chip)
|
|
{
|
|
struct crb_priv *priv = chip->vendor.priv;
|
|
u8 sts = 0;
|
|
|
|
if ((le32_to_cpu(ioread32(&priv->cca->start)) & CRB_START_INVOKE) !=
|
|
CRB_START_INVOKE)
|
|
sts |= CRB_STS_COMPLETE;
|
|
|
|
return sts;
|
|
}
|
|
|
|
static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count)
|
|
{
|
|
struct crb_priv *priv = chip->vendor.priv;
|
|
unsigned int expected;
|
|
|
|
/* sanity check */
|
|
if (count < 6)
|
|
return -EIO;
|
|
|
|
if (le32_to_cpu(ioread32(&priv->cca->sts)) & CRB_CA_STS_ERROR)
|
|
return -EIO;
|
|
|
|
memcpy_fromio(buf, priv->rsp, 6);
|
|
expected = be32_to_cpup((__be32 *) &buf[2]);
|
|
|
|
if (expected > count)
|
|
return -EIO;
|
|
|
|
memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6);
|
|
|
|
return expected;
|
|
}
|
|
|
|
static int crb_do_acpi_start(struct tpm_chip *chip)
|
|
{
|
|
union acpi_object *obj;
|
|
int rc;
|
|
|
|
obj = acpi_evaluate_dsm(chip->acpi_dev_handle,
|
|
CRB_ACPI_START_UUID,
|
|
CRB_ACPI_START_REVISION_ID,
|
|
CRB_ACPI_START_INDEX,
|
|
NULL);
|
|
if (!obj)
|
|
return -ENXIO;
|
|
rc = obj->integer.value == 0 ? 0 : -ENXIO;
|
|
ACPI_FREE(obj);
|
|
return rc;
|
|
}
|
|
|
|
static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
|
|
{
|
|
struct crb_priv *priv = chip->vendor.priv;
|
|
int rc = 0;
|
|
|
|
if (len > le32_to_cpu(ioread32(&priv->cca->cmd_size))) {
|
|
dev_err(&chip->dev,
|
|
"invalid command count value %x %zx\n",
|
|
(unsigned int) len,
|
|
(size_t) le32_to_cpu(ioread32(&priv->cca->cmd_size)));
|
|
return -E2BIG;
|
|
}
|
|
|
|
memcpy_toio(priv->cmd, buf, len);
|
|
|
|
/* Make sure that cmd is populated before issuing start. */
|
|
wmb();
|
|
|
|
if (priv->flags & CRB_FL_CRB_START)
|
|
iowrite32(cpu_to_le32(CRB_START_INVOKE), &priv->cca->start);
|
|
|
|
if (priv->flags & CRB_FL_ACPI_START)
|
|
rc = crb_do_acpi_start(chip);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void crb_cancel(struct tpm_chip *chip)
|
|
{
|
|
struct crb_priv *priv = chip->vendor.priv;
|
|
|
|
iowrite32(cpu_to_le32(CRB_CANCEL_INVOKE), &priv->cca->cancel);
|
|
|
|
/* Make sure that cmd is populated before issuing cancel. */
|
|
wmb();
|
|
|
|
if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
|
|
dev_err(&chip->dev, "ACPI Start failed\n");
|
|
|
|
iowrite32(0, &priv->cca->cancel);
|
|
}
|
|
|
|
static bool crb_req_canceled(struct tpm_chip *chip, u8 status)
|
|
{
|
|
struct crb_priv *priv = chip->vendor.priv;
|
|
u32 cancel = le32_to_cpu(ioread32(&priv->cca->cancel));
|
|
|
|
return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;
|
|
}
|
|
|
|
static const struct tpm_class_ops tpm_crb = {
|
|
.status = crb_status,
|
|
.recv = crb_recv,
|
|
.send = crb_send,
|
|
.cancel = crb_cancel,
|
|
.req_canceled = crb_req_canceled,
|
|
.req_complete_mask = CRB_STS_COMPLETE,
|
|
.req_complete_val = CRB_STS_COMPLETE,
|
|
};
|
|
|
|
static int crb_acpi_add(struct acpi_device *device)
|
|
{
|
|
struct tpm_chip *chip;
|
|
struct acpi_tpm2 *buf;
|
|
struct crb_priv *priv;
|
|
struct device *dev = &device->dev;
|
|
acpi_status status;
|
|
u32 sm;
|
|
u64 pa;
|
|
int rc;
|
|
|
|
chip = tpmm_chip_alloc(dev, &tpm_crb);
|
|
if (IS_ERR(chip))
|
|
return PTR_ERR(chip);
|
|
|
|
chip->flags = TPM_CHIP_FLAG_TPM2;
|
|
|
|
status = acpi_get_table(ACPI_SIG_TPM2, 1,
|
|
(struct acpi_table_header **) &buf);
|
|
if (ACPI_FAILURE(status)) {
|
|
dev_err(dev, "failed to get TPM2 ACPI table\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
|
|
dev_err(dev, "TPM2 ACPI table has wrong size");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv = (struct crb_priv *) devm_kzalloc(dev, sizeof(struct crb_priv),
|
|
GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(dev, "failed to devm_kzalloc for private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
sm = le32_to_cpu(buf->start_method);
|
|
|
|
/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
|
|
* report only ACPI start but in practice seems to require both
|
|
* ACPI start and CRB start.
|
|
*/
|
|
if (sm == CRB_SM_CRB || sm == CRB_SM_CRB_WITH_ACPI_START ||
|
|
!strcmp(acpi_device_hid(device), "MSFT0101"))
|
|
priv->flags |= CRB_FL_CRB_START;
|
|
|
|
if (sm == CRB_SM_ACPI_START || sm == CRB_SM_CRB_WITH_ACPI_START)
|
|
priv->flags |= CRB_FL_ACPI_START;
|
|
|
|
priv->cca = (struct crb_control_area __iomem *)
|
|
devm_ioremap_nocache(dev, buf->control_area_pa, 0x1000);
|
|
if (!priv->cca) {
|
|
dev_err(dev, "ioremap of the control area failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memcpy_fromio(&pa, &priv->cca->cmd_pa, 8);
|
|
pa = le64_to_cpu(pa);
|
|
priv->cmd = devm_ioremap_nocache(dev, le64_to_cpu(pa),
|
|
ioread32(&priv->cca->cmd_size));
|
|
if (!priv->cmd) {
|
|
dev_err(dev, "ioremap of the command buffer failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memcpy_fromio(&pa, &priv->cca->rsp_pa, 8);
|
|
pa = le64_to_cpu(pa);
|
|
priv->rsp = devm_ioremap_nocache(dev, le64_to_cpu(pa),
|
|
ioread32(&priv->cca->rsp_size));
|
|
if (!priv->rsp) {
|
|
dev_err(dev, "ioremap of the response buffer failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
chip->vendor.priv = priv;
|
|
|
|
/* Default timeouts and durations */
|
|
chip->vendor.timeout_a = msecs_to_jiffies(TPM2_TIMEOUT_A);
|
|
chip->vendor.timeout_b = msecs_to_jiffies(TPM2_TIMEOUT_B);
|
|
chip->vendor.timeout_c = msecs_to_jiffies(TPM2_TIMEOUT_C);
|
|
chip->vendor.timeout_d = msecs_to_jiffies(TPM2_TIMEOUT_D);
|
|
chip->vendor.duration[TPM_SHORT] =
|
|
msecs_to_jiffies(TPM2_DURATION_SHORT);
|
|
chip->vendor.duration[TPM_MEDIUM] =
|
|
msecs_to_jiffies(TPM2_DURATION_MEDIUM);
|
|
chip->vendor.duration[TPM_LONG] =
|
|
msecs_to_jiffies(TPM2_DURATION_LONG);
|
|
|
|
chip->acpi_dev_handle = device->handle;
|
|
|
|
rc = tpm2_do_selftest(chip);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return tpm_chip_register(chip);
|
|
}
|
|
|
|
static int crb_acpi_remove(struct acpi_device *device)
|
|
{
|
|
struct device *dev = &device->dev;
|
|
struct tpm_chip *chip = dev_get_drvdata(dev);
|
|
|
|
tpm_chip_unregister(chip);
|
|
|
|
if (chip->flags & TPM_CHIP_FLAG_TPM2)
|
|
tpm2_shutdown(chip, TPM2_SU_CLEAR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct acpi_device_id crb_device_ids[] = {
|
|
{"MSFT0101", 0},
|
|
{"", 0},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, crb_device_ids);
|
|
|
|
static struct acpi_driver crb_acpi_driver = {
|
|
.name = "tpm_crb",
|
|
.ids = crb_device_ids,
|
|
.ops = {
|
|
.add = crb_acpi_add,
|
|
.remove = crb_acpi_remove,
|
|
},
|
|
.drv = {
|
|
.pm = &crb_pm,
|
|
},
|
|
};
|
|
|
|
module_acpi_driver(crb_acpi_driver);
|
|
MODULE_AUTHOR("Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>");
|
|
MODULE_DESCRIPTION("TPM2 Driver");
|
|
MODULE_VERSION("0.1");
|
|
MODULE_LICENSE("GPL");
|