mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 19:45:06 +08:00
c172708d38
Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
487 lines
13 KiB
C
487 lines
13 KiB
C
/*
|
|
* tps62360.c -- TI tps62360
|
|
*
|
|
* Driver for processor core supply tps62360, tps62361B, tps62362 and tps62363.
|
|
*
|
|
* Copyright (c) 2012, NVIDIA Corporation.
|
|
*
|
|
* Author: Laxman Dewangan <ldewangan@nvidia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
|
|
* whether express or implied; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
|
|
* 02111-1307, USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/tps62360.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* Register definitions */
|
|
#define REG_VSET0 0
|
|
#define REG_VSET1 1
|
|
#define REG_VSET2 2
|
|
#define REG_VSET3 3
|
|
#define REG_CONTROL 4
|
|
#define REG_TEMP 5
|
|
#define REG_RAMPCTRL 6
|
|
#define REG_CHIPID 8
|
|
|
|
enum chips {TPS62360, TPS62361, TPS62362, TPS62363};
|
|
|
|
#define TPS62360_BASE_VOLTAGE 770
|
|
#define TPS62360_N_VOLTAGES 64
|
|
|
|
#define TPS62361_BASE_VOLTAGE 500
|
|
#define TPS62361_N_VOLTAGES 128
|
|
|
|
/* tps 62360 chip information */
|
|
struct tps62360_chip {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct regulator_dev *rdev;
|
|
struct regmap *regmap;
|
|
int chip_id;
|
|
int vsel0_gpio;
|
|
int vsel1_gpio;
|
|
int voltage_base;
|
|
u8 voltage_reg_mask;
|
|
bool en_internal_pulldn;
|
|
bool en_force_pwm;
|
|
bool en_discharge;
|
|
bool valid_gpios;
|
|
int lru_index[4];
|
|
int curr_vset_vsel[4];
|
|
int curr_vset_id;
|
|
};
|
|
|
|
/*
|
|
* find_voltage_set_register: Find new voltage configuration register
|
|
* (VSET) id.
|
|
* The finding of the new VSET register will be based on the LRU mechanism.
|
|
* Each VSET register will have different voltage configured . This
|
|
* Function will look if any of the VSET register have requested voltage set
|
|
* or not.
|
|
* - If it is already there then it will make that register as most
|
|
* recently used and return as found so that caller need not to set
|
|
* the VSET register but need to set the proper gpios to select this
|
|
* VSET register.
|
|
* - If requested voltage is not found then it will use the least
|
|
* recently mechanism to get new VSET register for new configuration
|
|
* and will return not_found so that caller need to set new VSET
|
|
* register and then gpios (both).
|
|
*/
|
|
static bool find_voltage_set_register(struct tps62360_chip *tps,
|
|
int req_vsel, int *vset_reg_id)
|
|
{
|
|
int i;
|
|
bool found = false;
|
|
int new_vset_reg = tps->lru_index[3];
|
|
int found_index = 3;
|
|
for (i = 0; i < 4; ++i) {
|
|
if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) {
|
|
new_vset_reg = tps->lru_index[i];
|
|
found_index = i;
|
|
found = true;
|
|
goto update_lru_index;
|
|
}
|
|
}
|
|
|
|
update_lru_index:
|
|
for (i = found_index; i > 0; i--)
|
|
tps->lru_index[i] = tps->lru_index[i - 1];
|
|
|
|
tps->lru_index[0] = new_vset_reg;
|
|
*vset_reg_id = new_vset_reg;
|
|
return found;
|
|
}
|
|
|
|
static int tps62360_dcdc_get_voltage(struct regulator_dev *dev)
|
|
{
|
|
struct tps62360_chip *tps = rdev_get_drvdata(dev);
|
|
int vsel;
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s: Error in reading register %d\n",
|
|
__func__, REG_VSET0 + tps->curr_vset_id);
|
|
return ret;
|
|
}
|
|
vsel = (int)data & tps->voltage_reg_mask;
|
|
return (tps->voltage_base + vsel * 10) * 1000;
|
|
}
|
|
|
|
static int tps62360_dcdc_set_voltage(struct regulator_dev *dev,
|
|
int min_uV, int max_uV, unsigned *selector)
|
|
{
|
|
struct tps62360_chip *tps = rdev_get_drvdata(dev);
|
|
int vsel;
|
|
int ret;
|
|
bool found = false;
|
|
int new_vset_id = tps->curr_vset_id;
|
|
|
|
if (max_uV < min_uV)
|
|
return -EINVAL;
|
|
|
|
if (min_uV >
|
|
((tps->voltage_base + (tps->desc.n_voltages - 1) * 10) * 1000))
|
|
return -EINVAL;
|
|
|
|
if (max_uV < tps->voltage_base * 1000)
|
|
return -EINVAL;
|
|
|
|
vsel = DIV_ROUND_UP(min_uV - (tps->voltage_base * 1000), 10000);
|
|
if (selector)
|
|
*selector = (vsel & tps->voltage_reg_mask);
|
|
|
|
/*
|
|
* If gpios are available to select the VSET register then least
|
|
* recently used register for new configuration.
|
|
*/
|
|
if (tps->valid_gpios)
|
|
found = find_voltage_set_register(tps, vsel, &new_vset_id);
|
|
|
|
if (!found) {
|
|
ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id,
|
|
tps->voltage_reg_mask, vsel);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s: Error in updating register %d\n",
|
|
__func__, REG_VSET0 + new_vset_id);
|
|
return ret;
|
|
}
|
|
tps->curr_vset_id = new_vset_id;
|
|
tps->curr_vset_vsel[new_vset_id] = vsel;
|
|
}
|
|
|
|
/* Select proper VSET register vio gpios */
|
|
if (tps->valid_gpios) {
|
|
gpio_set_value_cansleep(tps->vsel0_gpio,
|
|
new_vset_id & 0x1);
|
|
gpio_set_value_cansleep(tps->vsel1_gpio,
|
|
(new_vset_id >> 1) & 0x1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tps62360_dcdc_list_voltage(struct regulator_dev *dev,
|
|
unsigned selector)
|
|
{
|
|
struct tps62360_chip *tps = rdev_get_drvdata(dev);
|
|
|
|
if (selector >= tps->desc.n_voltages)
|
|
return -EINVAL;
|
|
return (tps->voltage_base + selector * 10) * 1000;
|
|
}
|
|
|
|
static struct regulator_ops tps62360_dcdc_ops = {
|
|
.get_voltage = tps62360_dcdc_get_voltage,
|
|
.set_voltage = tps62360_dcdc_set_voltage,
|
|
.list_voltage = tps62360_dcdc_list_voltage,
|
|
};
|
|
|
|
static int tps62360_init_force_pwm(struct tps62360_chip *tps,
|
|
struct tps62360_regulator_platform_data *pdata,
|
|
int vset_id)
|
|
{
|
|
unsigned int data;
|
|
int ret;
|
|
ret = regmap_read(tps->regmap, REG_VSET0 + vset_id, &data);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s() fails in writing reg %d\n",
|
|
__func__, REG_VSET0 + vset_id);
|
|
return ret;
|
|
}
|
|
tps->curr_vset_vsel[vset_id] = data & tps->voltage_reg_mask;
|
|
if (pdata->en_force_pwm)
|
|
data |= BIT(7);
|
|
else
|
|
data &= ~BIT(7);
|
|
ret = regmap_write(tps->regmap, REG_VSET0 + vset_id, data);
|
|
if (ret < 0)
|
|
dev_err(tps->dev, "%s() fails in writing reg %d\n",
|
|
__func__, REG_VSET0 + vset_id);
|
|
return ret;
|
|
}
|
|
|
|
static int tps62360_init_dcdc(struct tps62360_chip *tps,
|
|
struct tps62360_regulator_platform_data *pdata)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
/* Initailize internal pull up/down control */
|
|
if (tps->en_internal_pulldn)
|
|
ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0);
|
|
else
|
|
ret = regmap_write(tps->regmap, REG_CONTROL, 0x0);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s() fails in writing reg %d\n",
|
|
__func__, REG_CONTROL);
|
|
return ret;
|
|
}
|
|
|
|
/* Initailize force PWM mode */
|
|
if (tps->valid_gpios) {
|
|
for (i = 0; i < 4; ++i) {
|
|
ret = tps62360_init_force_pwm(tps, pdata, i);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = tps62360_init_force_pwm(tps, pdata, tps->curr_vset_id);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* Reset output discharge path to reduce power consumption */
|
|
ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0);
|
|
if (ret < 0)
|
|
dev_err(tps->dev, "%s() fails in updating reg %d\n",
|
|
__func__, REG_RAMPCTRL);
|
|
return ret;
|
|
}
|
|
|
|
static const struct regmap_config tps62360_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static int __devinit tps62360_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct regulator_config config = { };
|
|
struct tps62360_regulator_platform_data *pdata;
|
|
struct regulator_dev *rdev;
|
|
struct tps62360_chip *tps;
|
|
int ret;
|
|
int i;
|
|
|
|
pdata = client->dev.platform_data;
|
|
if (!pdata) {
|
|
dev_err(&client->dev, "%s() Err: Platform data not found\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
|
|
if (!tps) {
|
|
dev_err(&client->dev, "%s() Err: Memory allocation fails\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
tps->en_force_pwm = pdata->en_force_pwm;
|
|
tps->en_discharge = pdata->en_discharge;
|
|
tps->en_internal_pulldn = pdata->en_internal_pulldn;
|
|
tps->vsel0_gpio = pdata->vsel0_gpio;
|
|
tps->vsel1_gpio = pdata->vsel1_gpio;
|
|
tps->dev = &client->dev;
|
|
|
|
switch (id->driver_data) {
|
|
case TPS62360:
|
|
case TPS62362:
|
|
tps->voltage_base = TPS62360_BASE_VOLTAGE;
|
|
tps->voltage_reg_mask = 0x3F;
|
|
tps->desc.n_voltages = TPS62360_N_VOLTAGES;
|
|
break;
|
|
case TPS62361:
|
|
case TPS62363:
|
|
tps->voltage_base = TPS62361_BASE_VOLTAGE;
|
|
tps->voltage_reg_mask = 0x7F;
|
|
tps->desc.n_voltages = TPS62361_N_VOLTAGES;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
tps->desc.name = id->name;
|
|
tps->desc.id = 0;
|
|
tps->desc.ops = &tps62360_dcdc_ops;
|
|
tps->desc.type = REGULATOR_VOLTAGE;
|
|
tps->desc.owner = THIS_MODULE;
|
|
tps->regmap = regmap_init_i2c(client, &tps62360_regmap_config);
|
|
if (IS_ERR(tps->regmap)) {
|
|
ret = PTR_ERR(tps->regmap);
|
|
dev_err(&client->dev, "%s() Err: Failed to allocate register"
|
|
"map: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
i2c_set_clientdata(client, tps);
|
|
|
|
tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 +
|
|
(pdata->vsel0_def_state & 1);
|
|
tps->lru_index[0] = tps->curr_vset_id;
|
|
tps->valid_gpios = false;
|
|
|
|
if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) {
|
|
ret = gpio_request(tps->vsel0_gpio, "tps62360-vsel0");
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Err: Could not obtain vsel0 GPIO %d: %d\n",
|
|
tps->vsel0_gpio, ret);
|
|
goto err_gpio0;
|
|
}
|
|
ret = gpio_direction_output(tps->vsel0_gpio,
|
|
pdata->vsel0_def_state);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Err: Could not set direction of"
|
|
"vsel0 GPIO %d: %d\n", tps->vsel0_gpio, ret);
|
|
gpio_free(tps->vsel0_gpio);
|
|
goto err_gpio0;
|
|
}
|
|
|
|
ret = gpio_request(tps->vsel1_gpio, "tps62360-vsel1");
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Err: Could not obtain vsel1 GPIO %d: %d\n",
|
|
tps->vsel1_gpio, ret);
|
|
goto err_gpio1;
|
|
}
|
|
ret = gpio_direction_output(tps->vsel1_gpio,
|
|
pdata->vsel1_def_state);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Err: Could not set direction of"
|
|
"vsel1 GPIO %d: %d\n", tps->vsel1_gpio, ret);
|
|
gpio_free(tps->vsel1_gpio);
|
|
goto err_gpio1;
|
|
}
|
|
tps->valid_gpios = true;
|
|
|
|
/*
|
|
* Initialize the lru index with vset_reg id
|
|
* The index 0 will be most recently used and
|
|
* set with the tps->curr_vset_id */
|
|
for (i = 0; i < 4; ++i)
|
|
tps->lru_index[i] = i;
|
|
tps->lru_index[0] = tps->curr_vset_id;
|
|
tps->lru_index[tps->curr_vset_id] = 0;
|
|
}
|
|
|
|
ret = tps62360_init_dcdc(tps, pdata);
|
|
if (ret < 0) {
|
|
dev_err(tps->dev, "%s() Err: Init fails with = %d\n",
|
|
__func__, ret);
|
|
goto err_init;
|
|
}
|
|
|
|
config.dev = &client->dev;
|
|
config.init_data = &pdata->reg_init_data;
|
|
config.driver_data = tps;
|
|
|
|
/* Register the regulators */
|
|
rdev = regulator_register(&tps->desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(tps->dev, "%s() Err: Failed to register %s\n",
|
|
__func__, id->name);
|
|
ret = PTR_ERR(rdev);
|
|
goto err_init;
|
|
}
|
|
|
|
tps->rdev = rdev;
|
|
return 0;
|
|
|
|
err_init:
|
|
if (gpio_is_valid(tps->vsel1_gpio))
|
|
gpio_free(tps->vsel1_gpio);
|
|
err_gpio1:
|
|
if (gpio_is_valid(tps->vsel0_gpio))
|
|
gpio_free(tps->vsel0_gpio);
|
|
err_gpio0:
|
|
regmap_exit(tps->regmap);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* tps62360_remove - tps62360 driver i2c remove handler
|
|
* @client: i2c driver client device structure
|
|
*
|
|
* Unregister TPS driver as an i2c client device driver
|
|
*/
|
|
static int __devexit tps62360_remove(struct i2c_client *client)
|
|
{
|
|
struct tps62360_chip *tps = i2c_get_clientdata(client);
|
|
|
|
if (gpio_is_valid(tps->vsel1_gpio))
|
|
gpio_free(tps->vsel1_gpio);
|
|
|
|
if (gpio_is_valid(tps->vsel0_gpio))
|
|
gpio_free(tps->vsel0_gpio);
|
|
|
|
regulator_unregister(tps->rdev);
|
|
regmap_exit(tps->regmap);
|
|
return 0;
|
|
}
|
|
|
|
static void tps62360_shutdown(struct i2c_client *client)
|
|
{
|
|
struct tps62360_chip *tps = i2c_get_clientdata(client);
|
|
int st;
|
|
|
|
if (!tps->en_discharge)
|
|
return;
|
|
|
|
/* Configure the output discharge path */
|
|
st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2));
|
|
if (st < 0)
|
|
dev_err(tps->dev, "%s() fails in updating reg %d\n",
|
|
__func__, REG_RAMPCTRL);
|
|
}
|
|
|
|
static const struct i2c_device_id tps62360_id[] = {
|
|
{.name = "tps62360", .driver_data = TPS62360},
|
|
{.name = "tps62361", .driver_data = TPS62361},
|
|
{.name = "tps62362", .driver_data = TPS62362},
|
|
{.name = "tps62363", .driver_data = TPS62363},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, tps62360_id);
|
|
|
|
static struct i2c_driver tps62360_i2c_driver = {
|
|
.driver = {
|
|
.name = "tps62360",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = tps62360_probe,
|
|
.remove = __devexit_p(tps62360_remove),
|
|
.shutdown = tps62360_shutdown,
|
|
.id_table = tps62360_id,
|
|
};
|
|
|
|
static int __init tps62360_init(void)
|
|
{
|
|
return i2c_add_driver(&tps62360_i2c_driver);
|
|
}
|
|
subsys_initcall(tps62360_init);
|
|
|
|
static void __exit tps62360_cleanup(void)
|
|
{
|
|
i2c_del_driver(&tps62360_i2c_driver);
|
|
}
|
|
module_exit(tps62360_cleanup);
|
|
|
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
|
MODULE_DESCRIPTION("TPS6236x voltage regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|