mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-12 21:44:06 +08:00
f053ea8d84
atmel_mxt_ts driver by Daniel and MT protocol addition for win8 devices. Conflicts: drivers/input/touchscreen/atmel_mxt_ts.c
1285 lines
30 KiB
C
1285 lines
30 KiB
C
/*
|
|
* Atmel maXTouch Touchscreen driver
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics Co.Ltd
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/atmel_mxt_ts.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Version */
|
|
#define MXT_VER_20 20
|
|
#define MXT_VER_21 21
|
|
#define MXT_VER_22 22
|
|
|
|
/* Slave addresses */
|
|
#define MXT_APP_LOW 0x4a
|
|
#define MXT_APP_HIGH 0x4b
|
|
#define MXT_BOOT_LOW 0x24
|
|
#define MXT_BOOT_HIGH 0x25
|
|
|
|
/* Firmware */
|
|
#define MXT_FW_NAME "maxtouch.fw"
|
|
|
|
/* Registers */
|
|
#define MXT_INFO 0x00
|
|
#define MXT_FAMILY_ID 0x00
|
|
#define MXT_VARIANT_ID 0x01
|
|
#define MXT_VERSION 0x02
|
|
#define MXT_BUILD 0x03
|
|
#define MXT_MATRIX_X_SIZE 0x04
|
|
#define MXT_MATRIX_Y_SIZE 0x05
|
|
#define MXT_OBJECT_NUM 0x06
|
|
#define MXT_OBJECT_START 0x07
|
|
|
|
#define MXT_OBJECT_SIZE 6
|
|
|
|
/* Object types */
|
|
#define MXT_DEBUG_DIAGNOSTIC_T37 37
|
|
#define MXT_GEN_MESSAGE_T5 5
|
|
#define MXT_GEN_COMMAND_T6 6
|
|
#define MXT_GEN_POWER_T7 7
|
|
#define MXT_GEN_ACQUIRE_T8 8
|
|
#define MXT_GEN_DATASOURCE_T53 53
|
|
#define MXT_TOUCH_MULTI_T9 9
|
|
#define MXT_TOUCH_KEYARRAY_T15 15
|
|
#define MXT_TOUCH_PROXIMITY_T23 23
|
|
#define MXT_TOUCH_PROXKEY_T52 52
|
|
#define MXT_PROCI_GRIPFACE_T20 20
|
|
#define MXT_PROCG_NOISE_T22 22
|
|
#define MXT_PROCI_ONETOUCH_T24 24
|
|
#define MXT_PROCI_TWOTOUCH_T27 27
|
|
#define MXT_PROCI_GRIP_T40 40
|
|
#define MXT_PROCI_PALM_T41 41
|
|
#define MXT_PROCI_TOUCHSUPPRESSION_T42 42
|
|
#define MXT_PROCI_STYLUS_T47 47
|
|
#define MXT_PROCG_NOISESUPPRESSION_T48 48
|
|
#define MXT_SPT_COMMSCONFIG_T18 18
|
|
#define MXT_SPT_GPIOPWM_T19 19
|
|
#define MXT_SPT_SELFTEST_T25 25
|
|
#define MXT_SPT_CTECONFIG_T28 28
|
|
#define MXT_SPT_USERDATA_T38 38
|
|
#define MXT_SPT_DIGITIZER_T43 43
|
|
#define MXT_SPT_MESSAGECOUNT_T44 44
|
|
#define MXT_SPT_CTECONFIG_T46 46
|
|
|
|
/* MXT_GEN_COMMAND_T6 field */
|
|
#define MXT_COMMAND_RESET 0
|
|
#define MXT_COMMAND_BACKUPNV 1
|
|
#define MXT_COMMAND_CALIBRATE 2
|
|
#define MXT_COMMAND_REPORTALL 3
|
|
#define MXT_COMMAND_DIAGNOSTIC 5
|
|
|
|
/* MXT_GEN_POWER_T7 field */
|
|
#define MXT_POWER_IDLEACQINT 0
|
|
#define MXT_POWER_ACTVACQINT 1
|
|
#define MXT_POWER_ACTV2IDLETO 2
|
|
|
|
/* MXT_GEN_ACQUIRE_T8 field */
|
|
#define MXT_ACQUIRE_CHRGTIME 0
|
|
#define MXT_ACQUIRE_TCHDRIFT 2
|
|
#define MXT_ACQUIRE_DRIFTST 3
|
|
#define MXT_ACQUIRE_TCHAUTOCAL 4
|
|
#define MXT_ACQUIRE_SYNC 5
|
|
#define MXT_ACQUIRE_ATCHCALST 6
|
|
#define MXT_ACQUIRE_ATCHCALSTHR 7
|
|
|
|
/* MXT_TOUCH_MULTI_T9 field */
|
|
#define MXT_TOUCH_CTRL 0
|
|
#define MXT_TOUCH_XORIGIN 1
|
|
#define MXT_TOUCH_YORIGIN 2
|
|
#define MXT_TOUCH_XSIZE 3
|
|
#define MXT_TOUCH_YSIZE 4
|
|
#define MXT_TOUCH_BLEN 6
|
|
#define MXT_TOUCH_TCHTHR 7
|
|
#define MXT_TOUCH_TCHDI 8
|
|
#define MXT_TOUCH_ORIENT 9
|
|
#define MXT_TOUCH_MOVHYSTI 11
|
|
#define MXT_TOUCH_MOVHYSTN 12
|
|
#define MXT_TOUCH_NUMTOUCH 14
|
|
#define MXT_TOUCH_MRGHYST 15
|
|
#define MXT_TOUCH_MRGTHR 16
|
|
#define MXT_TOUCH_AMPHYST 17
|
|
#define MXT_TOUCH_XRANGE_LSB 18
|
|
#define MXT_TOUCH_XRANGE_MSB 19
|
|
#define MXT_TOUCH_YRANGE_LSB 20
|
|
#define MXT_TOUCH_YRANGE_MSB 21
|
|
#define MXT_TOUCH_XLOCLIP 22
|
|
#define MXT_TOUCH_XHICLIP 23
|
|
#define MXT_TOUCH_YLOCLIP 24
|
|
#define MXT_TOUCH_YHICLIP 25
|
|
#define MXT_TOUCH_XEDGECTRL 26
|
|
#define MXT_TOUCH_XEDGEDIST 27
|
|
#define MXT_TOUCH_YEDGECTRL 28
|
|
#define MXT_TOUCH_YEDGEDIST 29
|
|
#define MXT_TOUCH_JUMPLIMIT 30
|
|
|
|
/* MXT_PROCI_GRIPFACE_T20 field */
|
|
#define MXT_GRIPFACE_CTRL 0
|
|
#define MXT_GRIPFACE_XLOGRIP 1
|
|
#define MXT_GRIPFACE_XHIGRIP 2
|
|
#define MXT_GRIPFACE_YLOGRIP 3
|
|
#define MXT_GRIPFACE_YHIGRIP 4
|
|
#define MXT_GRIPFACE_MAXTCHS 5
|
|
#define MXT_GRIPFACE_SZTHR1 7
|
|
#define MXT_GRIPFACE_SZTHR2 8
|
|
#define MXT_GRIPFACE_SHPTHR1 9
|
|
#define MXT_GRIPFACE_SHPTHR2 10
|
|
#define MXT_GRIPFACE_SUPEXTTO 11
|
|
|
|
/* MXT_PROCI_NOISE field */
|
|
#define MXT_NOISE_CTRL 0
|
|
#define MXT_NOISE_OUTFLEN 1
|
|
#define MXT_NOISE_GCAFUL_LSB 3
|
|
#define MXT_NOISE_GCAFUL_MSB 4
|
|
#define MXT_NOISE_GCAFLL_LSB 5
|
|
#define MXT_NOISE_GCAFLL_MSB 6
|
|
#define MXT_NOISE_ACTVGCAFVALID 7
|
|
#define MXT_NOISE_NOISETHR 8
|
|
#define MXT_NOISE_FREQHOPSCALE 10
|
|
#define MXT_NOISE_FREQ0 11
|
|
#define MXT_NOISE_FREQ1 12
|
|
#define MXT_NOISE_FREQ2 13
|
|
#define MXT_NOISE_FREQ3 14
|
|
#define MXT_NOISE_FREQ4 15
|
|
#define MXT_NOISE_IDLEGCAFVALID 16
|
|
|
|
/* MXT_SPT_COMMSCONFIG_T18 */
|
|
#define MXT_COMMS_CTRL 0
|
|
#define MXT_COMMS_CMD 1
|
|
|
|
/* MXT_SPT_CTECONFIG_T28 field */
|
|
#define MXT_CTE_CTRL 0
|
|
#define MXT_CTE_CMD 1
|
|
#define MXT_CTE_MODE 2
|
|
#define MXT_CTE_IDLEGCAFDEPTH 3
|
|
#define MXT_CTE_ACTVGCAFDEPTH 4
|
|
#define MXT_CTE_VOLTAGE 5
|
|
|
|
#define MXT_VOLTAGE_DEFAULT 2700000
|
|
#define MXT_VOLTAGE_STEP 10000
|
|
|
|
/* Define for MXT_GEN_COMMAND_T6 */
|
|
#define MXT_BOOT_VALUE 0xa5
|
|
#define MXT_BACKUP_VALUE 0x55
|
|
#define MXT_BACKUP_TIME 25 /* msec */
|
|
#define MXT_RESET_TIME 65 /* msec */
|
|
|
|
#define MXT_FWRESET_TIME 175 /* msec */
|
|
|
|
/* Command to unlock bootloader */
|
|
#define MXT_UNLOCK_CMD_MSB 0xaa
|
|
#define MXT_UNLOCK_CMD_LSB 0xdc
|
|
|
|
/* Bootloader mode status */
|
|
#define MXT_WAITING_BOOTLOAD_CMD 0xc0 /* valid 7 6 bit only */
|
|
#define MXT_WAITING_FRAME_DATA 0x80 /* valid 7 6 bit only */
|
|
#define MXT_FRAME_CRC_CHECK 0x02
|
|
#define MXT_FRAME_CRC_FAIL 0x03
|
|
#define MXT_FRAME_CRC_PASS 0x04
|
|
#define MXT_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */
|
|
#define MXT_BOOT_STATUS_MASK 0x3f
|
|
|
|
/* Touch status */
|
|
#define MXT_UNGRIP (1 << 0)
|
|
#define MXT_SUPPRESS (1 << 1)
|
|
#define MXT_AMP (1 << 2)
|
|
#define MXT_VECTOR (1 << 3)
|
|
#define MXT_MOVE (1 << 4)
|
|
#define MXT_RELEASE (1 << 5)
|
|
#define MXT_PRESS (1 << 6)
|
|
#define MXT_DETECT (1 << 7)
|
|
|
|
/* Touch orient bits */
|
|
#define MXT_XY_SWITCH (1 << 0)
|
|
#define MXT_X_INVERT (1 << 1)
|
|
#define MXT_Y_INVERT (1 << 2)
|
|
|
|
/* Touchscreen absolute values */
|
|
#define MXT_MAX_AREA 0xff
|
|
|
|
struct mxt_info {
|
|
u8 family_id;
|
|
u8 variant_id;
|
|
u8 version;
|
|
u8 build;
|
|
u8 matrix_xsize;
|
|
u8 matrix_ysize;
|
|
u8 object_num;
|
|
};
|
|
|
|
struct mxt_object {
|
|
u8 type;
|
|
u16 start_address;
|
|
u8 size; /* Size of each instance - 1 */
|
|
u8 instances; /* Number of instances - 1 */
|
|
u8 num_report_ids;
|
|
} __packed;
|
|
|
|
struct mxt_message {
|
|
u8 reportid;
|
|
u8 message[7];
|
|
};
|
|
|
|
/* Each client has this additional data */
|
|
struct mxt_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
char phys[64]; /* device physical location */
|
|
const struct mxt_platform_data *pdata;
|
|
struct mxt_object *object_table;
|
|
struct mxt_info info;
|
|
unsigned int irq;
|
|
unsigned int max_x;
|
|
unsigned int max_y;
|
|
|
|
/* Cached parameters from object table */
|
|
u8 T6_reportid;
|
|
u8 T9_reportid_min;
|
|
u8 T9_reportid_max;
|
|
};
|
|
|
|
static bool mxt_object_readable(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case MXT_GEN_COMMAND_T6:
|
|
case MXT_GEN_POWER_T7:
|
|
case MXT_GEN_ACQUIRE_T8:
|
|
case MXT_GEN_DATASOURCE_T53:
|
|
case MXT_TOUCH_MULTI_T9:
|
|
case MXT_TOUCH_KEYARRAY_T15:
|
|
case MXT_TOUCH_PROXIMITY_T23:
|
|
case MXT_TOUCH_PROXKEY_T52:
|
|
case MXT_PROCI_GRIPFACE_T20:
|
|
case MXT_PROCG_NOISE_T22:
|
|
case MXT_PROCI_ONETOUCH_T24:
|
|
case MXT_PROCI_TWOTOUCH_T27:
|
|
case MXT_PROCI_GRIP_T40:
|
|
case MXT_PROCI_PALM_T41:
|
|
case MXT_PROCI_TOUCHSUPPRESSION_T42:
|
|
case MXT_PROCI_STYLUS_T47:
|
|
case MXT_PROCG_NOISESUPPRESSION_T48:
|
|
case MXT_SPT_COMMSCONFIG_T18:
|
|
case MXT_SPT_GPIOPWM_T19:
|
|
case MXT_SPT_SELFTEST_T25:
|
|
case MXT_SPT_CTECONFIG_T28:
|
|
case MXT_SPT_USERDATA_T38:
|
|
case MXT_SPT_DIGITIZER_T43:
|
|
case MXT_SPT_CTECONFIG_T46:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mxt_object_writable(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case MXT_GEN_COMMAND_T6:
|
|
case MXT_GEN_POWER_T7:
|
|
case MXT_GEN_ACQUIRE_T8:
|
|
case MXT_TOUCH_MULTI_T9:
|
|
case MXT_TOUCH_KEYARRAY_T15:
|
|
case MXT_TOUCH_PROXIMITY_T23:
|
|
case MXT_TOUCH_PROXKEY_T52:
|
|
case MXT_PROCI_GRIPFACE_T20:
|
|
case MXT_PROCG_NOISE_T22:
|
|
case MXT_PROCI_ONETOUCH_T24:
|
|
case MXT_PROCI_TWOTOUCH_T27:
|
|
case MXT_PROCI_GRIP_T40:
|
|
case MXT_PROCI_PALM_T41:
|
|
case MXT_PROCI_TOUCHSUPPRESSION_T42:
|
|
case MXT_PROCI_STYLUS_T47:
|
|
case MXT_PROCG_NOISESUPPRESSION_T48:
|
|
case MXT_SPT_COMMSCONFIG_T18:
|
|
case MXT_SPT_GPIOPWM_T19:
|
|
case MXT_SPT_SELFTEST_T25:
|
|
case MXT_SPT_CTECONFIG_T28:
|
|
case MXT_SPT_DIGITIZER_T43:
|
|
case MXT_SPT_CTECONFIG_T46:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void mxt_dump_message(struct device *dev,
|
|
struct mxt_message *message)
|
|
{
|
|
dev_dbg(dev, "reportid: %u\tmessage: %02x %02x %02x %02x %02x %02x %02x\n",
|
|
message->reportid, message->message[0], message->message[1],
|
|
message->message[2], message->message[3], message->message[4],
|
|
message->message[5], message->message[6]);
|
|
}
|
|
|
|
static int mxt_check_bootloader(struct i2c_client *client,
|
|
unsigned int state)
|
|
{
|
|
u8 val;
|
|
|
|
recheck:
|
|
if (i2c_master_recv(client, &val, 1) != 1) {
|
|
dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
switch (state) {
|
|
case MXT_WAITING_BOOTLOAD_CMD:
|
|
case MXT_WAITING_FRAME_DATA:
|
|
val &= ~MXT_BOOT_STATUS_MASK;
|
|
break;
|
|
case MXT_FRAME_CRC_PASS:
|
|
if (val == MXT_FRAME_CRC_CHECK)
|
|
goto recheck;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (val != state) {
|
|
dev_err(&client->dev, "Unvalid bootloader mode state\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_unlock_bootloader(struct i2c_client *client)
|
|
{
|
|
u8 buf[2];
|
|
|
|
buf[0] = MXT_UNLOCK_CMD_LSB;
|
|
buf[1] = MXT_UNLOCK_CMD_MSB;
|
|
|
|
if (i2c_master_send(client, buf, 2) != 2) {
|
|
dev_err(&client->dev, "%s: i2c send failed\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_fw_write(struct i2c_client *client,
|
|
const u8 *data, unsigned int frame_size)
|
|
{
|
|
if (i2c_master_send(client, data, frame_size) != frame_size) {
|
|
dev_err(&client->dev, "%s: i2c send failed\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __mxt_read_reg(struct i2c_client *client,
|
|
u16 reg, u16 len, void *val)
|
|
{
|
|
struct i2c_msg xfer[2];
|
|
u8 buf[2];
|
|
int ret;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = (reg >> 8) & 0xff;
|
|
|
|
/* Write register */
|
|
xfer[0].addr = client->addr;
|
|
xfer[0].flags = 0;
|
|
xfer[0].len = 2;
|
|
xfer[0].buf = buf;
|
|
|
|
/* Read data */
|
|
xfer[1].addr = client->addr;
|
|
xfer[1].flags = I2C_M_RD;
|
|
xfer[1].len = len;
|
|
xfer[1].buf = val;
|
|
|
|
ret = i2c_transfer(client->adapter, xfer, 2);
|
|
if (ret == 2) {
|
|
ret = 0;
|
|
} else {
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
|
|
{
|
|
return __mxt_read_reg(client, reg, 1, val);
|
|
}
|
|
|
|
static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
|
|
const void *val)
|
|
{
|
|
u8 *buf;
|
|
size_t count;
|
|
int ret;
|
|
|
|
count = len + 2;
|
|
buf = kmalloc(count, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = (reg >> 8) & 0xff;
|
|
memcpy(&buf[2], val, len);
|
|
|
|
ret = i2c_master_send(client, buf, count);
|
|
if (ret == count) {
|
|
ret = 0;
|
|
} else {
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
dev_err(&client->dev, "%s: i2c send failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
|
|
{
|
|
return __mxt_write_reg(client, reg, 1, &val);
|
|
}
|
|
|
|
static struct mxt_object *
|
|
mxt_get_object(struct mxt_data *data, u8 type)
|
|
{
|
|
struct mxt_object *object;
|
|
int i;
|
|
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
if (object->type == type)
|
|
return object;
|
|
}
|
|
|
|
dev_err(&data->client->dev, "Invalid object type\n");
|
|
return NULL;
|
|
}
|
|
|
|
static int mxt_read_message(struct mxt_data *data,
|
|
struct mxt_message *message)
|
|
{
|
|
struct mxt_object *object;
|
|
u16 reg;
|
|
|
|
object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
|
|
if (!object)
|
|
return -EINVAL;
|
|
|
|
reg = object->start_address;
|
|
return __mxt_read_reg(data->client, reg,
|
|
sizeof(struct mxt_message), message);
|
|
}
|
|
|
|
static int mxt_write_object(struct mxt_data *data,
|
|
u8 type, u8 offset, u8 val)
|
|
{
|
|
struct mxt_object *object;
|
|
u16 reg;
|
|
|
|
object = mxt_get_object(data, type);
|
|
if (!object || offset >= object->size + 1)
|
|
return -EINVAL;
|
|
|
|
reg = object->start_address;
|
|
return mxt_write_reg(data->client, reg + offset, val);
|
|
}
|
|
|
|
static void mxt_input_touchevent(struct mxt_data *data,
|
|
struct mxt_message *message, int id)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 status = message->message[0];
|
|
struct input_dev *input_dev = data->input_dev;
|
|
int x;
|
|
int y;
|
|
int area;
|
|
int pressure;
|
|
|
|
x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
|
|
y = (message->message[2] << 4) | ((message->message[3] & 0xf));
|
|
if (data->max_x < 1024)
|
|
x = x >> 2;
|
|
if (data->max_y < 1024)
|
|
y = y >> 2;
|
|
|
|
area = message->message[4];
|
|
pressure = message->message[5];
|
|
|
|
dev_dbg(dev,
|
|
"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
|
|
id,
|
|
(status & MXT_DETECT) ? 'D' : '.',
|
|
(status & MXT_PRESS) ? 'P' : '.',
|
|
(status & MXT_RELEASE) ? 'R' : '.',
|
|
(status & MXT_MOVE) ? 'M' : '.',
|
|
(status & MXT_VECTOR) ? 'V' : '.',
|
|
(status & MXT_AMP) ? 'A' : '.',
|
|
(status & MXT_SUPPRESS) ? 'S' : '.',
|
|
(status & MXT_UNGRIP) ? 'U' : '.',
|
|
x, y, area, pressure);
|
|
|
|
input_mt_slot(input_dev, id);
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
|
|
status & MXT_DETECT);
|
|
|
|
if (status & MXT_DETECT) {
|
|
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
|
|
input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
|
|
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
|
|
}
|
|
}
|
|
|
|
static unsigned mxt_extract_T6_csum(const u8 *csum)
|
|
{
|
|
return csum[0] | (csum[1] << 8) | (csum[2] << 16);
|
|
}
|
|
|
|
static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
|
|
{
|
|
u8 id = msg->reportid;
|
|
return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
|
|
}
|
|
|
|
static irqreturn_t mxt_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mxt_data *data = dev_id;
|
|
struct mxt_message message;
|
|
const u8 *payload = &message.message[0];
|
|
struct device *dev = &data->client->dev;
|
|
u8 reportid;
|
|
bool update_input = false;
|
|
|
|
do {
|
|
if (mxt_read_message(data, &message)) {
|
|
dev_err(dev, "Failed to read message\n");
|
|
goto end;
|
|
}
|
|
|
|
reportid = message.reportid;
|
|
|
|
if (reportid == data->T6_reportid) {
|
|
u8 status = payload[0];
|
|
unsigned csum = mxt_extract_T6_csum(&payload[1]);
|
|
dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
|
|
status, csum);
|
|
} else if (mxt_is_T9_message(data, &message)) {
|
|
int id = reportid - data->T9_reportid_min;
|
|
mxt_input_touchevent(data, &message, id);
|
|
update_input = true;
|
|
} else {
|
|
mxt_dump_message(dev, &message);
|
|
}
|
|
} while (reportid != 0xff);
|
|
|
|
if (update_input) {
|
|
input_mt_report_pointer_emulation(data->input_dev, false);
|
|
input_sync(data->input_dev);
|
|
}
|
|
|
|
end:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxt_check_reg_init(struct mxt_data *data)
|
|
{
|
|
const struct mxt_platform_data *pdata = data->pdata;
|
|
struct mxt_object *object;
|
|
struct device *dev = &data->client->dev;
|
|
int index = 0;
|
|
int i, size;
|
|
int ret;
|
|
|
|
if (!pdata->config) {
|
|
dev_dbg(dev, "No cfg data defined, skipping reg init\n");
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
|
|
if (!mxt_object_writable(object->type))
|
|
continue;
|
|
|
|
size = (object->size + 1) * (object->instances + 1);
|
|
if (index + size > pdata->config_length) {
|
|
dev_err(dev, "Not enough config data!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = __mxt_write_reg(data->client, object->start_address,
|
|
size, &pdata->config[index]);
|
|
if (ret)
|
|
return ret;
|
|
index += size;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_make_highchg(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
struct mxt_message message;
|
|
int count = 10;
|
|
int error;
|
|
|
|
/* Read dummy message to make high CHG pin */
|
|
do {
|
|
error = mxt_read_message(data, &message);
|
|
if (error)
|
|
return error;
|
|
} while (message.reportid != 0xff && --count);
|
|
|
|
if (!count) {
|
|
dev_err(dev, "CHG pin isn't cleared\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_handle_pdata(struct mxt_data *data)
|
|
{
|
|
const struct mxt_platform_data *pdata = data->pdata;
|
|
u8 voltage;
|
|
|
|
/* Set touchscreen lines */
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XSIZE,
|
|
pdata->x_line);
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YSIZE,
|
|
pdata->y_line);
|
|
|
|
/* Set touchscreen orient */
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_ORIENT,
|
|
pdata->orient);
|
|
|
|
/* Set touchscreen burst length */
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9,
|
|
MXT_TOUCH_BLEN, pdata->blen);
|
|
|
|
/* Set touchscreen threshold */
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9,
|
|
MXT_TOUCH_TCHTHR, pdata->threshold);
|
|
|
|
/* Set touchscreen resolution */
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9,
|
|
MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9,
|
|
MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9,
|
|
MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
|
|
mxt_write_object(data, MXT_TOUCH_MULTI_T9,
|
|
MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
|
|
|
|
/* Set touchscreen voltage */
|
|
if (pdata->voltage) {
|
|
if (pdata->voltage < MXT_VOLTAGE_DEFAULT) {
|
|
voltage = (MXT_VOLTAGE_DEFAULT - pdata->voltage) /
|
|
MXT_VOLTAGE_STEP;
|
|
voltage = 0xff - voltage + 1;
|
|
} else
|
|
voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) /
|
|
MXT_VOLTAGE_STEP;
|
|
|
|
mxt_write_object(data, MXT_SPT_CTECONFIG_T28,
|
|
MXT_CTE_VOLTAGE, voltage);
|
|
}
|
|
}
|
|
|
|
static int mxt_get_info(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
struct mxt_info *info = &data->info;
|
|
int error;
|
|
|
|
/* Read 7-byte info block starting at address 0 */
|
|
error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_get_object_table(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
size_t table_size;
|
|
int error;
|
|
int i;
|
|
u8 reportid;
|
|
|
|
table_size = data->info.object_num * sizeof(struct mxt_object);
|
|
error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
|
|
data->object_table);
|
|
if (error)
|
|
return error;
|
|
|
|
/* Valid Report IDs start counting from 1 */
|
|
reportid = 1;
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
struct mxt_object *object = data->object_table + i;
|
|
u8 min_id, max_id;
|
|
|
|
le16_to_cpus(&object->start_address);
|
|
|
|
if (object->num_report_ids) {
|
|
min_id = reportid;
|
|
reportid += object->num_report_ids *
|
|
(object->instances + 1);
|
|
max_id = reportid - 1;
|
|
} else {
|
|
min_id = 0;
|
|
max_id = 0;
|
|
}
|
|
|
|
dev_dbg(&data->client->dev,
|
|
"Type %2d Start %3d Size %3d Instances %2d ReportIDs %3u : %3u\n",
|
|
object->type, object->start_address, object->size + 1,
|
|
object->instances + 1, min_id, max_id);
|
|
|
|
switch (object->type) {
|
|
case MXT_GEN_COMMAND_T6:
|
|
data->T6_reportid = min_id;
|
|
break;
|
|
case MXT_TOUCH_MULTI_T9:
|
|
data->T9_reportid_min = min_id;
|
|
data->T9_reportid_max = max_id;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_free_object_table(struct mxt_data *data)
|
|
{
|
|
kfree(data->object_table);
|
|
data->object_table = NULL;
|
|
data->T6_reportid = 0;
|
|
data->T9_reportid_min = 0;
|
|
data->T9_reportid_max = 0;
|
|
|
|
}
|
|
|
|
static int mxt_initialize(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
struct mxt_info *info = &data->info;
|
|
int error;
|
|
u8 val;
|
|
|
|
error = mxt_get_info(data);
|
|
if (error)
|
|
return error;
|
|
|
|
data->object_table = kcalloc(info->object_num,
|
|
sizeof(struct mxt_object),
|
|
GFP_KERNEL);
|
|
if (!data->object_table) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get object table information */
|
|
error = mxt_get_object_table(data);
|
|
if (error)
|
|
goto err_free_object_table;
|
|
|
|
/* Check register init values */
|
|
error = mxt_check_reg_init(data);
|
|
if (error)
|
|
goto err_free_object_table;
|
|
|
|
mxt_handle_pdata(data);
|
|
|
|
/* Backup to memory */
|
|
mxt_write_object(data, MXT_GEN_COMMAND_T6,
|
|
MXT_COMMAND_BACKUPNV,
|
|
MXT_BACKUP_VALUE);
|
|
msleep(MXT_BACKUP_TIME);
|
|
|
|
/* Soft reset */
|
|
mxt_write_object(data, MXT_GEN_COMMAND_T6,
|
|
MXT_COMMAND_RESET, 1);
|
|
msleep(MXT_RESET_TIME);
|
|
|
|
/* Update matrix size at info struct */
|
|
error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
|
|
if (error)
|
|
goto err_free_object_table;
|
|
info->matrix_xsize = val;
|
|
|
|
error = mxt_read_reg(client, MXT_MATRIX_Y_SIZE, &val);
|
|
if (error)
|
|
goto err_free_object_table;
|
|
info->matrix_ysize = val;
|
|
|
|
dev_info(&client->dev,
|
|
"Family ID: %u Variant ID: %u Major.Minor.Build: %u.%u.%02X\n",
|
|
info->family_id, info->variant_id, info->version >> 4,
|
|
info->version & 0xf, info->build);
|
|
|
|
dev_info(&client->dev,
|
|
"Matrix X Size: %u Matrix Y Size: %u Object Num: %u\n",
|
|
info->matrix_xsize, info->matrix_ysize,
|
|
info->object_num);
|
|
|
|
return 0;
|
|
|
|
err_free_object_table:
|
|
mxt_free_object_table(data);
|
|
return error;
|
|
}
|
|
|
|
static void mxt_calc_resolution(struct mxt_data *data)
|
|
{
|
|
unsigned int max_x = data->pdata->x_size - 1;
|
|
unsigned int max_y = data->pdata->y_size - 1;
|
|
|
|
if (data->pdata->orient & MXT_XY_SWITCH) {
|
|
data->max_x = max_y;
|
|
data->max_y = max_x;
|
|
} else {
|
|
data->max_x = max_x;
|
|
data->max_y = max_y;
|
|
}
|
|
}
|
|
|
|
/* Firmware Version is returned as Major.Minor.Build */
|
|
static ssize_t mxt_fw_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_info *info = &data->info;
|
|
return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
|
|
info->version >> 4, info->version & 0xf, info->build);
|
|
}
|
|
|
|
/* Hardware Version is returned as FamilyID.VariantID */
|
|
static ssize_t mxt_hw_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_info *info = &data->info;
|
|
return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
|
|
info->family_id, info->variant_id);
|
|
}
|
|
|
|
static ssize_t mxt_show_instance(char *buf, int count,
|
|
struct mxt_object *object, int instance,
|
|
const u8 *val)
|
|
{
|
|
int i;
|
|
|
|
if (object->instances > 0)
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"Instance %u\n", instance);
|
|
|
|
for (i = 0; i < object->size + 1; i++)
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
|
|
count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t mxt_object_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_object *object;
|
|
int count = 0;
|
|
int i, j;
|
|
int error;
|
|
u8 *obuf;
|
|
|
|
/* Pre-allocate buffer large enough to hold max sized object. */
|
|
obuf = kmalloc(256, GFP_KERNEL);
|
|
if (!obuf)
|
|
return -ENOMEM;
|
|
|
|
error = 0;
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
|
|
if (!mxt_object_readable(object->type))
|
|
continue;
|
|
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"T%u:\n", object->type);
|
|
|
|
for (j = 0; j < object->instances + 1; j++) {
|
|
u16 size = object->size + 1;
|
|
u16 addr = object->start_address + j * size;
|
|
|
|
error = __mxt_read_reg(data->client, addr, size, obuf);
|
|
if (error)
|
|
goto done;
|
|
|
|
count = mxt_show_instance(buf, count, object, j, obuf);
|
|
}
|
|
}
|
|
|
|
done:
|
|
kfree(obuf);
|
|
return error ?: count;
|
|
}
|
|
|
|
static int mxt_load_fw(struct device *dev, const char *fn)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
const struct firmware *fw = NULL;
|
|
unsigned int frame_size;
|
|
unsigned int pos = 0;
|
|
int ret;
|
|
|
|
ret = request_firmware(&fw, fn, dev);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to open firmware %s\n", fn);
|
|
return ret;
|
|
}
|
|
|
|
/* Change to the bootloader mode */
|
|
mxt_write_object(data, MXT_GEN_COMMAND_T6,
|
|
MXT_COMMAND_RESET, MXT_BOOT_VALUE);
|
|
msleep(MXT_RESET_TIME);
|
|
|
|
/* Change to slave address of bootloader */
|
|
if (client->addr == MXT_APP_LOW)
|
|
client->addr = MXT_BOOT_LOW;
|
|
else
|
|
client->addr = MXT_BOOT_HIGH;
|
|
|
|
ret = mxt_check_bootloader(client, MXT_WAITING_BOOTLOAD_CMD);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Unlock bootloader */
|
|
mxt_unlock_bootloader(client);
|
|
|
|
while (pos < fw->size) {
|
|
ret = mxt_check_bootloader(client,
|
|
MXT_WAITING_FRAME_DATA);
|
|
if (ret)
|
|
goto out;
|
|
|
|
frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
|
|
|
|
/* We should add 2 at frame size as the the firmware data is not
|
|
* included the CRC bytes.
|
|
*/
|
|
frame_size += 2;
|
|
|
|
/* Write one frame to device */
|
|
mxt_fw_write(client, fw->data + pos, frame_size);
|
|
|
|
ret = mxt_check_bootloader(client,
|
|
MXT_FRAME_CRC_PASS);
|
|
if (ret)
|
|
goto out;
|
|
|
|
pos += frame_size;
|
|
|
|
dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size);
|
|
}
|
|
|
|
out:
|
|
release_firmware(fw);
|
|
|
|
/* Change to slave address of application */
|
|
if (client->addr == MXT_BOOT_LOW)
|
|
client->addr = MXT_APP_LOW;
|
|
else
|
|
client->addr = MXT_APP_HIGH;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t mxt_update_fw_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
int error;
|
|
|
|
disable_irq(data->irq);
|
|
|
|
error = mxt_load_fw(dev, MXT_FW_NAME);
|
|
if (error) {
|
|
dev_err(dev, "The firmware update failed(%d)\n", error);
|
|
count = error;
|
|
} else {
|
|
dev_dbg(dev, "The firmware update succeeded\n");
|
|
|
|
/* Wait for reset */
|
|
msleep(MXT_FWRESET_TIME);
|
|
|
|
mxt_free_object_table(data);
|
|
|
|
mxt_initialize(data);
|
|
}
|
|
|
|
enable_irq(data->irq);
|
|
|
|
error = mxt_make_highchg(data);
|
|
if (error)
|
|
return error;
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
|
|
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
|
|
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
|
|
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
|
|
|
|
static struct attribute *mxt_attrs[] = {
|
|
&dev_attr_fw_version.attr,
|
|
&dev_attr_hw_version.attr,
|
|
&dev_attr_object.attr,
|
|
&dev_attr_update_fw.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group mxt_attr_group = {
|
|
.attrs = mxt_attrs,
|
|
};
|
|
|
|
static void mxt_start(struct mxt_data *data)
|
|
{
|
|
/* Touch enable */
|
|
mxt_write_object(data,
|
|
MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
|
|
}
|
|
|
|
static void mxt_stop(struct mxt_data *data)
|
|
{
|
|
/* Touch disable */
|
|
mxt_write_object(data,
|
|
MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
|
|
}
|
|
|
|
static int mxt_input_open(struct input_dev *dev)
|
|
{
|
|
struct mxt_data *data = input_get_drvdata(dev);
|
|
|
|
mxt_start(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_input_close(struct input_dev *dev)
|
|
{
|
|
struct mxt_data *data = input_get_drvdata(dev);
|
|
|
|
mxt_stop(data);
|
|
}
|
|
|
|
static int __devinit mxt_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
const struct mxt_platform_data *pdata = client->dev.platform_data;
|
|
struct mxt_data *data;
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
unsigned int num_mt_slots;
|
|
|
|
if (!pdata)
|
|
return -EINVAL;
|
|
|
|
data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!data || !input_dev) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
input_dev->name = "Atmel maXTouch Touchscreen";
|
|
snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
|
|
client->adapter->nr, client->addr);
|
|
input_dev->phys = data->phys;
|
|
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = &client->dev;
|
|
input_dev->open = mxt_input_open;
|
|
input_dev->close = mxt_input_close;
|
|
|
|
data->client = client;
|
|
data->input_dev = input_dev;
|
|
data->pdata = pdata;
|
|
data->irq = client->irq;
|
|
|
|
mxt_calc_resolution(data);
|
|
|
|
error = mxt_initialize(data);
|
|
if (error)
|
|
goto err_free_mem;
|
|
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
__set_bit(EV_KEY, input_dev->evbit);
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
|
|
/* For single touch */
|
|
input_set_abs_params(input_dev, ABS_X,
|
|
0, data->max_x, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y,
|
|
0, data->max_y, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE,
|
|
0, 255, 0, 0);
|
|
|
|
/* For multi touch */
|
|
num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
|
|
error = input_mt_init_slots(input_dev, num_mt_slots);
|
|
if (error)
|
|
goto err_free_object;
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
|
|
0, MXT_MAX_AREA, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
|
|
0, data->max_x, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
|
|
0, data->max_y, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_PRESSURE,
|
|
0, 255, 0, 0);
|
|
|
|
input_set_drvdata(input_dev, data);
|
|
i2c_set_clientdata(client, data);
|
|
|
|
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
|
|
pdata->irqflags | IRQF_ONESHOT,
|
|
client->name, data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
goto err_free_object;
|
|
}
|
|
|
|
error = mxt_make_highchg(data);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
error = input_register_device(input_dev);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
|
|
if (error)
|
|
goto err_unregister_device;
|
|
|
|
return 0;
|
|
|
|
err_unregister_device:
|
|
input_unregister_device(input_dev);
|
|
input_dev = NULL;
|
|
err_free_irq:
|
|
free_irq(client->irq, data);
|
|
err_free_object:
|
|
kfree(data->object_table);
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
kfree(data);
|
|
return error;
|
|
}
|
|
|
|
static int __devexit mxt_remove(struct i2c_client *client)
|
|
{
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
|
|
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
|
|
free_irq(data->irq, data);
|
|
input_unregister_device(data->input_dev);
|
|
kfree(data->object_table);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mxt_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
mxt_stop(data);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
|
|
/* Soft reset */
|
|
mxt_write_object(data, MXT_GEN_COMMAND_T6,
|
|
MXT_COMMAND_RESET, 1);
|
|
|
|
msleep(MXT_RESET_TIME);
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
mxt_start(data);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
|
|
|
|
static const struct i2c_device_id mxt_id[] = {
|
|
{ "qt602240_ts", 0 },
|
|
{ "atmel_mxt_ts", 0 },
|
|
{ "mXT224", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mxt_id);
|
|
|
|
static struct i2c_driver mxt_driver = {
|
|
.driver = {
|
|
.name = "atmel_mxt_ts",
|
|
.owner = THIS_MODULE,
|
|
.pm = &mxt_pm_ops,
|
|
},
|
|
.probe = mxt_probe,
|
|
.remove = __devexit_p(mxt_remove),
|
|
.id_table = mxt_id,
|
|
};
|
|
|
|
module_i2c_driver(mxt_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
|
|
MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
|
|
MODULE_LICENSE("GPL");
|