linux/drivers/pci/doe.c
Lukas Wunner ac04840350 PCI/DOE: Create mailboxes on device enumeration
Currently a DOE instance cannot be shared by multiple drivers because
each driver creates its own pci_doe_mb struct for a given DOE instance.
For the same reason a DOE instance cannot be shared between the PCI core
and a driver.

Moreover, finding out which protocols a DOE instance supports requires
creating a pci_doe_mb for it.  If a device has multiple DOE instances,
a driver looking for a specific protocol may need to create a pci_doe_mb
for each of the device's DOE instances and then destroy those which
do not support the desired protocol.  That's obviously an inefficient
way to do things.

Overcome these issues by creating mailboxes in the PCI core on device
enumeration.

Provide a pci_find_doe_mailbox() API call to allow drivers to get a
pci_doe_mb for a given (pci_dev, vendor, protocol) triple.  This API is
modeled after pci_find_capability() and can later be amended with a
pci_find_next_doe_mailbox() call to iterate over all mailboxes of a
given pci_dev which support a specific protocol.

On removal, destroy the mailboxes in pci_destroy_dev(), after the driver
is unbound.  This allows drivers to use DOE in their ->remove() hook.

On surprise removal, cancel ongoing DOE exchanges and prevent new ones
from being scheduled.  Thereby ensure that a hot-removed device doesn't
needlessly wait for a running exchange to time out.

Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ming Li <ming4.li@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-18 10:36:58 -07:00

734 lines
19 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Data Object Exchange
* PCIe r6.0, sec 6.30 DOE
*
* Copyright (C) 2021 Huawei
* Jonathan Cameron <Jonathan.Cameron@huawei.com>
*
* Copyright (C) 2022 Intel Corporation
* Ira Weiny <ira.weiny@intel.com>
*/
#define dev_fmt(fmt) "DOE: " fmt
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/mutex.h>
#include <linux/pci.h>
#include <linux/pci-doe.h>
#include <linux/workqueue.h>
#include "pci.h"
#define PCI_DOE_PROTOCOL_DISCOVERY 0
/* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */
#define PCI_DOE_TIMEOUT HZ
#define PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128)
#define PCI_DOE_FLAG_CANCEL 0
#define PCI_DOE_FLAG_DEAD 1
/* Max data object length is 2^18 dwords */
#define PCI_DOE_MAX_LENGTH (1 << 18)
/**
* struct pci_doe_mb - State for a single DOE mailbox
*
* This state is used to manage a single DOE mailbox capability. All fields
* should be considered opaque to the consumers and the structure passed into
* the helpers below after being created by pci_doe_create_mb().
*
* @pdev: PCI device this mailbox belongs to
* @cap_offset: Capability offset
* @prots: Array of protocols supported (encoded as long values)
* @wq: Wait queue for work item
* @work_queue: Queue of pci_doe_work items
* @flags: Bit array of PCI_DOE_FLAG_* flags
*/
struct pci_doe_mb {
struct pci_dev *pdev;
u16 cap_offset;
struct xarray prots;
wait_queue_head_t wq;
struct workqueue_struct *work_queue;
unsigned long flags;
};
struct pci_doe_protocol {
u16 vid;
u8 type;
};
/**
* struct pci_doe_task - represents a single query/response
*
* @prot: DOE Protocol
* @request_pl: The request payload
* @request_pl_sz: Size of the request payload (bytes)
* @response_pl: The response payload
* @response_pl_sz: Size of the response payload (bytes)
* @rv: Return value. Length of received response or error (bytes)
* @complete: Called when task is complete
* @private: Private data for the consumer
* @work: Used internally by the mailbox
* @doe_mb: Used internally by the mailbox
*
* The payload sizes and rv are specified in bytes with the following
* restrictions concerning the protocol.
*
* 1) The request_pl_sz must be a multiple of double words (4 bytes)
* 2) The response_pl_sz must be >= a single double word (4 bytes)
* 3) rv is returned as bytes but it will be a multiple of double words
*/
struct pci_doe_task {
struct pci_doe_protocol prot;
const __le32 *request_pl;
size_t request_pl_sz;
__le32 *response_pl;
size_t response_pl_sz;
int rv;
void (*complete)(struct pci_doe_task *task);
void *private;
/* initialized by pci_doe_submit_task() */
struct work_struct work;
struct pci_doe_mb *doe_mb;
};
static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout)
{
if (wait_event_timeout(doe_mb->wq,
test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags),
timeout))
return -EIO;
return 0;
}
static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val)
{
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val);
}
static int pci_doe_abort(struct pci_doe_mb *doe_mb)
{
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
unsigned long timeout_jiffies;
pci_dbg(pdev, "[%x] Issuing Abort\n", offset);
timeout_jiffies = jiffies + PCI_DOE_TIMEOUT;
pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT);
do {
int rc;
u32 val;
rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL);
if (rc)
return rc;
pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
/* Abort success! */
if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) &&
!FIELD_GET(PCI_DOE_STATUS_BUSY, val))
return 0;
} while (!time_after(jiffies, timeout_jiffies));
/* Abort has timed out and the MB is dead */
pci_err(pdev, "[%x] ABORT timed out\n", offset);
return -EIO;
}
static int pci_doe_send_req(struct pci_doe_mb *doe_mb,
struct pci_doe_task *task)
{
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
size_t length;
u32 val;
int i;
/*
* Check the DOE busy bit is not set. If it is set, this could indicate
* someone other than Linux (e.g. firmware) is using the mailbox. Note
* it is expected that firmware and OS will negotiate access rights via
* an, as yet to be defined, method.
*/
pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
if (FIELD_GET(PCI_DOE_STATUS_BUSY, val))
return -EBUSY;
if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
return -EIO;
/* Length is 2 DW of header + length of payload in DW */
length = 2 + task->request_pl_sz / sizeof(__le32);
if (length > PCI_DOE_MAX_LENGTH)
return -EIO;
if (length == PCI_DOE_MAX_LENGTH)
length = 0;
/* Write DOE Header */
val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) |
FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type);
pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val);
pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH,
length));
for (i = 0; i < task->request_pl_sz / sizeof(__le32); i++)
pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
le32_to_cpu(task->request_pl[i]));
pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO);
return 0;
}
static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb)
{
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
u32 val;
pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val))
return true;
return false;
}
static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
{
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
size_t length, payload_length;
u32 val;
int i;
/* Read the first dword to get the protocol */
pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) ||
(FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) {
dev_err_ratelimited(&pdev->dev, "[%x] expected [VID, Protocol] = [%04x, %02x], got [%04x, %02x]\n",
doe_mb->cap_offset, task->prot.vid, task->prot.type,
FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val),
FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val));
return -EIO;
}
pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
/* Read the second dword to get the length */
pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val);
/* A value of 0x0 indicates max data object length */
if (!length)
length = PCI_DOE_MAX_LENGTH;
if (length < 2)
return -EIO;
/* First 2 dwords have already been read */
length -= 2;
payload_length = min(length, task->response_pl_sz / sizeof(__le32));
/* Read the rest of the response payload */
for (i = 0; i < payload_length; i++) {
pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
task->response_pl[i] = cpu_to_le32(val);
/* Prior to the last ack, ensure Data Object Ready */
if (i == (payload_length - 1) && !pci_doe_data_obj_ready(doe_mb))
return -EIO;
pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
}
/* Flush excess length */
for (; i < length; i++) {
pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
}
/* Final error check to pick up on any since Data Object Ready */
pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
return -EIO;
return min(length, task->response_pl_sz / sizeof(__le32)) * sizeof(__le32);
}
static void signal_task_complete(struct pci_doe_task *task, int rv)
{
task->rv = rv;
task->complete(task);
destroy_work_on_stack(&task->work);
}
static void signal_task_abort(struct pci_doe_task *task, int rv)
{
struct pci_doe_mb *doe_mb = task->doe_mb;
struct pci_dev *pdev = doe_mb->pdev;
if (pci_doe_abort(doe_mb)) {
/*
* If the device can't process an abort; set the mailbox dead
* - no more submissions
*/
pci_err(pdev, "[%x] Abort failed marking mailbox dead\n",
doe_mb->cap_offset);
set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags);
}
signal_task_complete(task, rv);
}
static void doe_statemachine_work(struct work_struct *work)
{
struct pci_doe_task *task = container_of(work, struct pci_doe_task,
work);
struct pci_doe_mb *doe_mb = task->doe_mb;
struct pci_dev *pdev = doe_mb->pdev;
int offset = doe_mb->cap_offset;
unsigned long timeout_jiffies;
u32 val;
int rc;
if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) {
signal_task_complete(task, -EIO);
return;
}
/* Send request */
rc = pci_doe_send_req(doe_mb, task);
if (rc) {
/*
* The specification does not provide any guidance on how to
* resolve conflicting requests from other entities.
* Furthermore, it is likely that busy will not be detected
* most of the time. Flag any detection of status busy with an
* error.
*/
if (rc == -EBUSY)
dev_err_ratelimited(&pdev->dev, "[%x] busy detected; another entity is sending conflicting requests\n",
offset);
signal_task_abort(task, rc);
return;
}
timeout_jiffies = jiffies + PCI_DOE_TIMEOUT;
/* Poll for response */
retry_resp:
pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
signal_task_abort(task, -EIO);
return;
}
if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) {
if (time_after(jiffies, timeout_jiffies)) {
signal_task_abort(task, -EIO);
return;
}
rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL);
if (rc) {
signal_task_abort(task, rc);
return;
}
goto retry_resp;
}
rc = pci_doe_recv_resp(doe_mb, task);
if (rc < 0) {
signal_task_abort(task, rc);
return;
}
signal_task_complete(task, rc);
}
static void pci_doe_task_complete(struct pci_doe_task *task)
{
complete(task->private);
}
static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid,
u8 *protocol)
{
u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX,
*index);
__le32 request_pl_le = cpu_to_le32(request_pl);
__le32 response_pl_le;
u32 response_pl;
int rc;
rc = pci_doe(doe_mb, PCI_VENDOR_ID_PCI_SIG, PCI_DOE_PROTOCOL_DISCOVERY,
&request_pl_le, sizeof(request_pl_le),
&response_pl_le, sizeof(response_pl_le));
if (rc < 0)
return rc;
if (rc != sizeof(response_pl_le))
return -EIO;
response_pl = le32_to_cpu(response_pl_le);
*vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl);
*protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL,
response_pl);
*index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX,
response_pl);
return 0;
}
static void *pci_doe_xa_prot_entry(u16 vid, u8 prot)
{
return xa_mk_value((vid << 8) | prot);
}
static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb)
{
u8 index = 0;
u8 xa_idx = 0;
do {
int rc;
u16 vid;
u8 prot;
rc = pci_doe_discovery(doe_mb, &index, &vid, &prot);
if (rc)
return rc;
pci_dbg(doe_mb->pdev,
"[%x] Found protocol %d vid: %x prot: %x\n",
doe_mb->cap_offset, xa_idx, vid, prot);
rc = xa_insert(&doe_mb->prots, xa_idx++,
pci_doe_xa_prot_entry(vid, prot), GFP_KERNEL);
if (rc)
return rc;
} while (index);
return 0;
}
static void pci_doe_cancel_tasks(struct pci_doe_mb *doe_mb)
{
/* Stop all pending work items from starting */
set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags);
/* Cancel an in progress work item, if necessary */
set_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags);
wake_up(&doe_mb->wq);
}
/**
* pci_doe_create_mb() - Create a DOE mailbox object
*
* @pdev: PCI device to create the DOE mailbox for
* @cap_offset: Offset of the DOE mailbox
*
* Create a single mailbox object to manage the mailbox protocol at the
* cap_offset specified.
*
* RETURNS: created mailbox object on success
* ERR_PTR(-errno) on failure
*/
static struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev,
u16 cap_offset)
{
struct pci_doe_mb *doe_mb;
int rc;
doe_mb = kzalloc(sizeof(*doe_mb), GFP_KERNEL);
if (!doe_mb)
return ERR_PTR(-ENOMEM);
doe_mb->pdev = pdev;
doe_mb->cap_offset = cap_offset;
init_waitqueue_head(&doe_mb->wq);
xa_init(&doe_mb->prots);
doe_mb->work_queue = alloc_ordered_workqueue("%s %s DOE [%x]", 0,
dev_driver_string(&pdev->dev),
pci_name(pdev),
doe_mb->cap_offset);
if (!doe_mb->work_queue) {
pci_err(pdev, "[%x] failed to allocate work queue\n",
doe_mb->cap_offset);
rc = -ENOMEM;
goto err_free;
}
/* Reset the mailbox by issuing an abort */
rc = pci_doe_abort(doe_mb);
if (rc) {
pci_err(pdev, "[%x] failed to reset mailbox with abort command : %d\n",
doe_mb->cap_offset, rc);
goto err_destroy_wq;
}
/*
* The state machine and the mailbox should be in sync now;
* Use the mailbox to query protocols.
*/
rc = pci_doe_cache_protocols(doe_mb);
if (rc) {
pci_err(pdev, "[%x] failed to cache protocols : %d\n",
doe_mb->cap_offset, rc);
goto err_cancel;
}
return doe_mb;
err_cancel:
pci_doe_cancel_tasks(doe_mb);
xa_destroy(&doe_mb->prots);
err_destroy_wq:
destroy_workqueue(doe_mb->work_queue);
err_free:
kfree(doe_mb);
return ERR_PTR(rc);
}
/**
* pci_doe_destroy_mb() - Destroy a DOE mailbox object
*
* @ptr: Pointer to DOE mailbox
*
* Destroy all internal data structures created for the DOE mailbox.
*/
static void pci_doe_destroy_mb(void *ptr)
{
struct pci_doe_mb *doe_mb = ptr;
pci_doe_cancel_tasks(doe_mb);
xa_destroy(&doe_mb->prots);
destroy_workqueue(doe_mb->work_queue);
kfree(doe_mb);
}
/**
* pcim_doe_create_mb() - Create a DOE mailbox object
*
* @pdev: PCI device to create the DOE mailbox for
* @cap_offset: Offset of the DOE mailbox
*
* Create a single mailbox object to manage the mailbox protocol at the
* cap_offset specified. The mailbox will automatically be destroyed on
* driver unbinding from @pdev.
*
* RETURNS: created mailbox object on success
* ERR_PTR(-errno) on failure
*/
struct pci_doe_mb *pcim_doe_create_mb(struct pci_dev *pdev, u16 cap_offset)
{
struct pci_doe_mb *doe_mb;
int rc;
doe_mb = pci_doe_create_mb(pdev, cap_offset);
if (IS_ERR(doe_mb))
return doe_mb;
rc = devm_add_action_or_reset(&pdev->dev, pci_doe_destroy_mb, doe_mb);
if (rc)
return ERR_PTR(rc);
return doe_mb;
}
EXPORT_SYMBOL_GPL(pcim_doe_create_mb);
/**
* pci_doe_supports_prot() - Return if the DOE instance supports the given
* protocol
* @doe_mb: DOE mailbox capability to query
* @vid: Protocol Vendor ID
* @type: Protocol type
*
* RETURNS: True if the DOE mailbox supports the protocol specified
*/
bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type)
{
unsigned long index;
void *entry;
/* The discovery protocol must always be supported */
if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY)
return true;
xa_for_each(&doe_mb->prots, index, entry)
if (entry == pci_doe_xa_prot_entry(vid, type))
return true;
return false;
}
EXPORT_SYMBOL_GPL(pci_doe_supports_prot);
/**
* pci_doe_submit_task() - Submit a task to be processed by the state machine
*
* @doe_mb: DOE mailbox capability to submit to
* @task: task to be queued
*
* Submit a DOE task (request/response) to the DOE mailbox to be processed.
* Returns upon queueing the task object. If the queue is full this function
* will sleep until there is room in the queue.
*
* task->complete will be called when the state machine is done processing this
* task.
*
* @task must be allocated on the stack.
*
* Excess data will be discarded.
*
* RETURNS: 0 when task has been successfully queued, -ERRNO on error
*/
static int pci_doe_submit_task(struct pci_doe_mb *doe_mb,
struct pci_doe_task *task)
{
if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type))
return -EINVAL;
/*
* DOE requests must be a whole number of DW and the response needs to
* be big enough for at least 1 DW
*/
if (task->request_pl_sz % sizeof(__le32) ||
task->response_pl_sz < sizeof(__le32))
return -EINVAL;
if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags))
return -EIO;
task->doe_mb = doe_mb;
INIT_WORK_ONSTACK(&task->work, doe_statemachine_work);
queue_work(doe_mb->work_queue, &task->work);
return 0;
}
/**
* pci_doe() - Perform Data Object Exchange
*
* @doe_mb: DOE Mailbox
* @vendor: Vendor ID
* @type: Data Object Type
* @request: Request payload
* @request_sz: Size of request payload (bytes)
* @response: Response payload
* @response_sz: Size of response payload (bytes)
*
* Submit @request to @doe_mb and store the @response.
* The DOE exchange is performed synchronously and may therefore sleep.
*
* Payloads are treated as opaque byte streams which are transmitted verbatim,
* without byte-swapping. If payloads contain little-endian register values,
* the caller is responsible for conversion with cpu_to_le32() / le32_to_cpu().
*
* RETURNS: Length of received response or negative errno.
* Received data in excess of @response_sz is discarded.
* The length may be smaller than @response_sz and the caller
* is responsible for checking that.
*/
int pci_doe(struct pci_doe_mb *doe_mb, u16 vendor, u8 type,
const void *request, size_t request_sz,
void *response, size_t response_sz)
{
DECLARE_COMPLETION_ONSTACK(c);
struct pci_doe_task task = {
.prot.vid = vendor,
.prot.type = type,
.request_pl = request,
.request_pl_sz = request_sz,
.response_pl = response,
.response_pl_sz = response_sz,
.complete = pci_doe_task_complete,
.private = &c,
};
int rc;
rc = pci_doe_submit_task(doe_mb, &task);
if (rc)
return rc;
wait_for_completion(&c);
return task.rv;
}
EXPORT_SYMBOL_GPL(pci_doe);
/**
* pci_find_doe_mailbox() - Find Data Object Exchange mailbox
*
* @pdev: PCI device
* @vendor: Vendor ID
* @type: Data Object Type
*
* Find first DOE mailbox of a PCI device which supports the given protocol.
*
* RETURNS: Pointer to the DOE mailbox or NULL if none was found.
*/
struct pci_doe_mb *pci_find_doe_mailbox(struct pci_dev *pdev, u16 vendor,
u8 type)
{
struct pci_doe_mb *doe_mb;
unsigned long index;
xa_for_each(&pdev->doe_mbs, index, doe_mb)
if (pci_doe_supports_prot(doe_mb, vendor, type))
return doe_mb;
return NULL;
}
EXPORT_SYMBOL_GPL(pci_find_doe_mailbox);
void pci_doe_init(struct pci_dev *pdev)
{
struct pci_doe_mb *doe_mb;
u16 offset = 0;
int rc;
xa_init(&pdev->doe_mbs);
while ((offset = pci_find_next_ext_capability(pdev, offset,
PCI_EXT_CAP_ID_DOE))) {
doe_mb = pci_doe_create_mb(pdev, offset);
if (IS_ERR(doe_mb)) {
pci_err(pdev, "[%x] failed to create mailbox: %ld\n",
offset, PTR_ERR(doe_mb));
continue;
}
rc = xa_insert(&pdev->doe_mbs, offset, doe_mb, GFP_KERNEL);
if (rc) {
pci_err(pdev, "[%x] failed to insert mailbox: %d\n",
offset, rc);
pci_doe_destroy_mb(doe_mb);
}
}
}
void pci_doe_destroy(struct pci_dev *pdev)
{
struct pci_doe_mb *doe_mb;
unsigned long index;
xa_for_each(&pdev->doe_mbs, index, doe_mb)
pci_doe_destroy_mb(doe_mb);
xa_destroy(&pdev->doe_mbs);
}
void pci_doe_disconnected(struct pci_dev *pdev)
{
struct pci_doe_mb *doe_mb;
unsigned long index;
xa_for_each(&pdev->doe_mbs, index, doe_mb)
pci_doe_cancel_tasks(doe_mb);
}