mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-26 04:25:27 +08:00
f1fe12c8bf
The Versatile Express was submitted with the actual display bridges unconnected (but defined in the device tree) and mock "panels" encoded in the device tree node of the PL111 controller. This doesn't even remotely describe the actual Versatile Express hardware. Exploit the SiI9022 bridge by connecting the PL111 pads to it, making it use EDID or fallback values to drive the monitor. The also has to use the reserved memory through the CMA pool rather than by open coding a memory region and remapping it explicitly in the driver. To achieve this, a reserved-memory node must exist in the root of the device tree, so we need to pull that out of the motherboard .dtsi include files, and push it into each top-level device tree instead. We do the same manouver for all the Versatile Express boards, taking into account the different location of the video RAM depending on which chip select is used on each platform. This plays nicely with the new PL111 DRM driver and follows the standard ways of assigning bridges and memory pools for graphics. Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Tested-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
451 lines
11 KiB
Plaintext
451 lines
11 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ARM Ltd. Versatile Express
|
|
*
|
|
* Motherboard Express uATX
|
|
* V2M-P1
|
|
*
|
|
* HBI-0190D
|
|
*
|
|
* Original memory map ("Legacy memory map" in the board's
|
|
* Technical Reference Manual)
|
|
*
|
|
* WARNING! The hardware described in this file is independent from the
|
|
* RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
|
|
* correspondence between the two configurations.
|
|
*
|
|
* TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
|
|
* CHANGES TO vexpress-v2m-rs1.dtsi!
|
|
*/
|
|
|
|
/ {
|
|
smb@4000000 {
|
|
motherboard {
|
|
model = "V2M-P1";
|
|
arm,hbi = <0x190>;
|
|
arm,vexpress,site = <0>;
|
|
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
|
#address-cells = <2>; /* SMB chipselect number and offset */
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
ranges;
|
|
|
|
flash@0,00000000 {
|
|
compatible = "arm,vexpress-flash", "cfi-flash";
|
|
reg = <0 0x00000000 0x04000000>,
|
|
<1 0x00000000 0x04000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
psram@2,00000000 {
|
|
compatible = "arm,vexpress-psram", "mtd-ram";
|
|
reg = <2 0x00000000 0x02000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
ethernet@3,02000000 {
|
|
compatible = "smsc,lan9118", "smsc,lan9115";
|
|
reg = <3 0x02000000 0x10000>;
|
|
interrupts = <15>;
|
|
phy-mode = "mii";
|
|
reg-io-width = <4>;
|
|
smsc,irq-active-high;
|
|
smsc,irq-push-pull;
|
|
vdd33a-supply = <&v2m_fixed_3v3>;
|
|
vddvario-supply = <&v2m_fixed_3v3>;
|
|
};
|
|
|
|
usb@3,03000000 {
|
|
compatible = "nxp,usb-isp1761";
|
|
reg = <3 0x03000000 0x20000>;
|
|
interrupts = <16>;
|
|
port1-otg;
|
|
};
|
|
|
|
iofpga@7,00000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 7 0 0x20000>;
|
|
|
|
v2m_sysreg: sysreg@0 {
|
|
compatible = "arm,vexpress-sysreg";
|
|
reg = <0x00000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x1000>;
|
|
|
|
v2m_led_gpios: gpio@8 {
|
|
compatible = "arm,vexpress-sysreg,sys_led";
|
|
reg = <0x008 4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
v2m_mmc_gpios: gpio@48 {
|
|
compatible = "arm,vexpress-sysreg,sys_mci";
|
|
reg = <0x048 4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
v2m_flash_gpios: gpio@4c {
|
|
compatible = "arm,vexpress-sysreg,sys_flash";
|
|
reg = <0x04c 4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
v2m_sysctl: sysctl@1000 {
|
|
compatible = "arm,sp810", "arm,primecell";
|
|
reg = <0x01000 0x1000>;
|
|
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
|
clock-names = "refclk", "timclk", "apb_pclk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
|
assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
|
|
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
|
|
};
|
|
|
|
/* PCI-E I2C bus */
|
|
v2m_i2c_pcie: i2c@2000 {
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x02000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pcie-switch@60 {
|
|
compatible = "idt,89hpes32h8";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
aaci@4000 {
|
|
compatible = "arm,pl041", "arm,primecell";
|
|
reg = <0x04000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&smbclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
mmci@5000 {
|
|
compatible = "arm,pl180", "arm,primecell";
|
|
reg = <0x05000 0x1000>;
|
|
interrupts = <9 10>;
|
|
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
|
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
|
max-frequency = <12000000>;
|
|
vmmc-supply = <&v2m_fixed_3v3>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
};
|
|
|
|
kmi@6000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x06000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
kmi@7000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x07000 0x1000>;
|
|
interrupts = <13>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial0: uart@9000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x09000 0x1000>;
|
|
interrupts = <5>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial1: uart@a000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0a000 0x1000>;
|
|
interrupts = <6>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial2: uart@b000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0b000 0x1000>;
|
|
interrupts = <7>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial3: uart@c000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0c000 0x1000>;
|
|
interrupts = <8>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
wdt@f000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0x0f000 0x1000>;
|
|
interrupts = <0>;
|
|
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
|
clock-names = "wdogclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_timer01: timer@11000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x11000 0x1000>;
|
|
interrupts = <2>;
|
|
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
|
};
|
|
|
|
v2m_timer23: timer@12000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x12000 0x1000>;
|
|
interrupts = <3>;
|
|
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
|
};
|
|
|
|
/* DVI I2C bus */
|
|
v2m_i2c_dvi: i2c@16000 {
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x16000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dvi-transmitter@39 {
|
|
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
|
reg = <0x39>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Both the core tile and the motherboard routes their output
|
|
* pads to this transmitter. The motherboard system controller
|
|
* can select one of them as input using a mux register in
|
|
* "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
|
|
* the only platform with this specific set-up.
|
|
*/
|
|
port@0 {
|
|
reg = <0>;
|
|
dvi_bridge_in_ct: endpoint {
|
|
remote-endpoint = <&clcd_pads_ct>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
dvi_bridge_in_mb: endpoint {
|
|
remote-endpoint = <&clcd_pads_mb>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dvi-transmitter@60 {
|
|
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
rtc@17000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x17000 0x1000>;
|
|
interrupts = <4>;
|
|
clocks = <&smbclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
compact-flash@1a000 {
|
|
compatible = "arm,vexpress-cf", "ata-generic";
|
|
reg = <0x1a000 0x100
|
|
0x1a100 0xf00>;
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
|
|
clcd@1f000 {
|
|
compatible = "arm,pl111", "arm,primecell";
|
|
reg = <0x1f000 0x1000>;
|
|
interrupt-names = "combined";
|
|
interrupts = <14>;
|
|
clocks = <&v2m_oscclk1>, <&smbclk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
/* 800x600 16bpp @36MHz works fine */
|
|
max-memory-bandwidth = <54000000>;
|
|
memory-region = <&vram>;
|
|
|
|
port {
|
|
clcd_pads_mb: endpoint {
|
|
remote-endpoint = <&dvi_bridge_in_mb>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
v2m_fixed_3v3: fixed-regulator-0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
v2m_clk24mhz: clk24mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "v2m:clk24mhz";
|
|
};
|
|
|
|
v2m_refclk1mhz: refclk1mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000>;
|
|
clock-output-names = "v2m:refclk1mhz";
|
|
};
|
|
|
|
v2m_refclk32khz: refclk32khz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "v2m:refclk32khz";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
user1 {
|
|
label = "v2m:green:user1";
|
|
gpios = <&v2m_led_gpios 0 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
user2 {
|
|
label = "v2m:green:user2";
|
|
gpios = <&v2m_led_gpios 1 0>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
user3 {
|
|
label = "v2m:green:user3";
|
|
gpios = <&v2m_led_gpios 2 0>;
|
|
linux,default-trigger = "cpu0";
|
|
};
|
|
|
|
user4 {
|
|
label = "v2m:green:user4";
|
|
gpios = <&v2m_led_gpios 3 0>;
|
|
linux,default-trigger = "cpu1";
|
|
};
|
|
|
|
user5 {
|
|
label = "v2m:green:user5";
|
|
gpios = <&v2m_led_gpios 4 0>;
|
|
linux,default-trigger = "cpu2";
|
|
};
|
|
|
|
user6 {
|
|
label = "v2m:green:user6";
|
|
gpios = <&v2m_led_gpios 5 0>;
|
|
linux,default-trigger = "cpu3";
|
|
};
|
|
|
|
user7 {
|
|
label = "v2m:green:user7";
|
|
gpios = <&v2m_led_gpios 6 0>;
|
|
linux,default-trigger = "cpu4";
|
|
};
|
|
|
|
user8 {
|
|
label = "v2m:green:user8";
|
|
gpios = <&v2m_led_gpios 7 0>;
|
|
linux,default-trigger = "cpu5";
|
|
};
|
|
};
|
|
|
|
mcc {
|
|
compatible = "arm,vexpress,config-bus";
|
|
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
|
|
|
oscclk0 {
|
|
/* MCC static memory clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 0>;
|
|
freq-range = <25000000 60000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk0";
|
|
};
|
|
|
|
v2m_oscclk1: oscclk1 {
|
|
/* CLCD clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 1>;
|
|
freq-range = <23750000 65000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk1";
|
|
};
|
|
|
|
v2m_oscclk2: oscclk2 {
|
|
/* IO FPGA peripheral clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 2>;
|
|
freq-range = <24000000 24000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk2";
|
|
};
|
|
|
|
volt-vio {
|
|
/* Logic level voltage */
|
|
compatible = "arm,vexpress-volt";
|
|
arm,vexpress-sysreg,func = <2 0>;
|
|
regulator-name = "VIO";
|
|
regulator-always-on;
|
|
label = "VIO";
|
|
};
|
|
|
|
temp-mcc {
|
|
/* MCC internal operating temperature */
|
|
compatible = "arm,vexpress-temp";
|
|
arm,vexpress-sysreg,func = <4 0>;
|
|
label = "MCC";
|
|
};
|
|
|
|
reset {
|
|
compatible = "arm,vexpress-reset";
|
|
arm,vexpress-sysreg,func = <5 0>;
|
|
};
|
|
|
|
muxfpga {
|
|
compatible = "arm,vexpress-muxfpga";
|
|
arm,vexpress-sysreg,func = <7 0>;
|
|
};
|
|
|
|
shutdown {
|
|
compatible = "arm,vexpress-shutdown";
|
|
arm,vexpress-sysreg,func = <8 0>;
|
|
};
|
|
|
|
reboot {
|
|
compatible = "arm,vexpress-reboot";
|
|
arm,vexpress-sysreg,func = <9 0>;
|
|
};
|
|
|
|
dvimode {
|
|
compatible = "arm,vexpress-dvimode";
|
|
arm,vexpress-sysreg,func = <11 0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
}; |