linux/arch/arm/boot/dts/pxa910.dtsi
Rob Herring abe60a3a7a ARM: dts: Kill off skeleton{64}.dtsi
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.

The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30 17:30:31 +01:00

178 lines
4.0 KiB
Plaintext

/*
* Copyright (C) 2012 Marvell Technology Group Ltd.
* Author: Haojian Zhuang <haojian.zhuang@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <dt-bindings/clock/marvell,pxa910.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
i2c0 = &twsi1;
i2c1 = &twsi2;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
L2: l2-cache {
compatible = "marvell,tauros2-cache";
marvell,tauros2-cache-features = <0x3>;
};
axi@d4200000 { /* AXI */
compatible = "mrvl,axi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd4200000 0x00200000>;
ranges;
intc: interrupt-controller@d4282000 {
compatible = "mrvl,mmp-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xd4282000 0x1000>;
mrvl,intc-nr-irqs = <64>;
};
};
apb@d4000000 { /* APB */
compatible = "mrvl,apb-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd4000000 0x00200000>;
ranges;
timer0: timer@d4014000 {
compatible = "mrvl,mmp-timer";
reg = <0xd4014000 0x100>;
interrupts = <13>;
};
timer1: timer@d4016000 {
compatible = "mrvl,mmp-timer";
reg = <0xd4016000 0x100>;
interrupts = <29>;
status = "disabled";
};
uart1: uart@d4017000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
clocks = <&soc_clocks PXA910_CLK_UART0>;
resets = <&soc_clocks PXA910_CLK_UART0>;
status = "disabled";
};
uart2: uart@d4018000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
clocks = <&soc_clocks PXA910_CLK_UART1>;
resets = <&soc_clocks PXA910_CLK_UART1>;
status = "disabled";
};
uart3: uart@d4036000 {
compatible = "mrvl,mmp-uart";
reg = <0xd4036000 0x1000>;
interrupts = <59>;
clocks = <&soc_clocks PXA910_CLK_UART2>;
resets = <&soc_clocks PXA910_CLK_UART2>;
status = "disabled";
};
gpio@d4019000 {
compatible = "marvell,mmp-gpio";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd4019000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
clocks = <&soc_clocks PXA910_CLK_GPIO>;
resets = <&soc_clocks PXA910_CLK_GPIO>;
interrupt-controller;
#interrupt-cells = <1>;
ranges;
gcb0: gpio@d4019000 {
reg = <0xd4019000 0x4>;
};
gcb1: gpio@d4019004 {
reg = <0xd4019004 0x4>;
};
gcb2: gpio@d4019008 {
reg = <0xd4019008 0x4>;
};
gcb3: gpio@d4019100 {
reg = <0xd4019100 0x4>;
};
};
twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xd4011000 0x1000>;
interrupts = <7>;
clocks = <&soc_clocks PXA910_CLK_TWSI0>;
resets = <&soc_clocks PXA910_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
twsi2: i2c@d4037000 {
compatible = "mrvl,mmp-twsi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xd4037000 0x1000>;
interrupts = <54>;
clocks = <&soc_clocks PXA910_CLK_TWSI1>;
resets = <&soc_clocks PXA910_CLK_TWSI1>;
status = "disabled";
};
rtc: rtc@d4010000 {
compatible = "mrvl,mmp-rtc";
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
clocks = <&soc_clocks PXA910_CLK_RTC>;
resets = <&soc_clocks PXA910_CLK_RTC>;
status = "disabled";
};
};
soc_clocks: clocks{
compatible = "marvell,pxa910-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,
<0xd4015000 0x1000>,
<0xd403b000 0x1000>;
reg-names = "mpmu", "apmu", "apbc", "apbcp";
#clock-cells = <1>;
#reset-cells = <1>;
};
};
};