Chun-Hao Lin 5fbea33740 r8169:update rtl8168g pcie ephy parameter ... Add ephy parameter to rtl8168g. Also change the common function of rtl8168g from "rtl_hw_start_8168g_1" to "rtl_hw_start_8168g". And function "rtl_hw_start_8168g_1" is used for setting rtl8168g hardware parameters. Following is the explanation of what hardware parameter change for. rtl8168g may erroneous judge the PCIe signal quality and show the error bit on PCI configuration space when in PCIe low power mode. The following ephy parameters are for above issue. { 0x00, 0x0000, 0x0008 } { 0x0c, 0x37d0, 0x0820 } { 0x1e, 0x0000, 0x0001 } rtl8168g may return to PCIe L0 from PCIe L0s low power mode too slow. The following ephy parameter is for above issue. { 0x19, 0x8000, 0x0000 } Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2014-12-11 21:38:52 -05:00
..
8139cp.c	ethernet/realtek: use napi_alloc_skb instead of netdev_alloc_skb_ip_align	2014-12-10 13:31:57 -05:00
8139too.c	ethernet/realtek: use napi_alloc_skb instead of netdev_alloc_skb_ip_align	2014-12-10 13:31:57 -05:00
atp.c	drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb	2013-03-09 16:09:19 -05:00
atp.h	net: ethernet: realtek: atp: checkpatch errors and warnings corrected	2014-10-29 14:52:06 -04:00
Kconfig	net: Move MII out from under NET_CORE and hide it	2013-06-19 22:22:56 -07:00
Makefile
r8169.c	r8169:update rtl8168g pcie ephy parameter	2014-12-11 21:38:52 -05:00